Repair Replacement Maintenance of street security Perimeter Lights High Mast lights at old Mil Stn Kapurthala and Mand area under GE Kapurthala

Amount

Attending of day to day street/security/Gate light/Post top lantern/High mast light fixed at up to 16 mtr height (HPSV,MH,Flourescent tube light, T-5, LED , Flood light fittings etc. of any make) complaints received through telephone or in person and reactification of defects installed on street light poles 9/11 mtr long, building walls, roof by bringing down the fittings on grond or in position including replacement of lamp, ignitor, flexible wire, reflector etc including cleaning of glass/acrylic cover for clear reflection of light, replacement of old unserviceable street light fittings with new fittings etc as required to make the light fitting functional (Vehicle, ladder, tools and takes as required at site for repair/for making light fittings functional shall be provided by the contractor at his own cost and arrangement. Note : (i) Light fitting, ballast, starter, ignitor, diffuser, cable, flexible wire and LED drive if required to be replaced in repair shall be measured and paid separetely under relevant item of this BOQ for supply and fixing in replacement. (ii) contractor manpower should be daily recieve a complaints at complaint cell at 9.00 AM by JE E/M and report after completion of complaints and handover a complaint slip as record of complaints with user signature.(iii) Old retrived material shall be deposited in AGE E/M yard and will be given to contractor after completion of contract. (vi) . Quantity of material by contractor shall be decided by Engineer in charge based on requirement. Note: Recovery @ 120/- per hour of the complaints is not being attended within six hours from intimation by rep of E/M subdivision through or telephonic/digital/ written complaints.

Taking down old unserviceable any type fitting and Supply and fixing LED street light fitting 45 Watt 230 V AC Raptor NEO street lights are aerodynamically designed for weather conditions with excellent thermal management made with high pressure die cast housing with toughened glass and high power LEDs with secondery optical and IP 65 protection efficiency > 110LPW 10KV SPD included Make-Crompton CAT PART No. TRP-409-45-57-SL-GL-NSG or equivalent in Havells/Bajaj/Philips,complete all as specified.

Taking down old unserviceable any type fitting and Supply and fixing LED street light fitting 60 Watt 230 V AC Raptor NEO street lights are aerodynamically designed for weather conditions with excellent thermal management made with high pressure die cast housing with toughened glass and high power LEDs with secondery optical and IP 65 protection efficiency > 110LPW 10KV SPD included Make-Crompton CAT PART No. TRP-409-60-57-SL-GL-NSG or equivalent in Havells/Bajaj/Philips,complete all as specified.

Taking down old unserviceable any type fitting and Supply and fixing LED street light fitting 70 Watt 230 V AC Raptor NEO street lights are aerodynamically designed for weather conditions with excellent thermal management made with high pressure die cast housing with toughened glass and high power LEDs with secondery optical and IP 65 protection efficiency > 110LPW 10KV SPD included Make-Crompton CAT PART No. TRP-409-70-57-SL-GL-NSG or equivalent in Havells/Bajaj/Philips,complete all as specified.

Taking down old unserviceable any type fitting and Supply and fixing Energy saving LED flood light 50 watts made up of pressure die cast aluminium housing with toughened glass and high pressure LEDs and secondery lenses with IP66 protection system Cat Part No CFS-504-50-57-NL-SL-GL-NSG, efficiency > 110LPW 10KV SPD Ccomplete fitting including all accessories all as specified and directed by Engineer-in-Charge. Make : Havells/ Philips/Bajaj

Taking down old unserviceable any type fitting and Supply and fixing Energy saving LED flood light 70 watts made up of pressure die cast aluminium housing with toughened glass and high pressure LEDs and secondery lenses with IP66 protection system Cat Part No LFL-70-CDL/60/M, efficiency > 110/125LPW 10KV SPD Ccomplete fitting including all accessories all as specified and directed by Engineer-in-Charge. Make : Havells/ Philips/Bajaj

Taking down old unserviceable any type fitting and Supply and fixing Energy saving LED flood light 100 watts made up of pressure die cast aluminium housing with toughened glass and high pressure LEDs and secondery lenses with IP66 protection system Cat Part No CFS-504-100-57-60D-SL-GL-NSG, efficiency > 110LPW 10KV SPD Ccomplete fitting including all accessories all as specified and directed by Engineer-in-Charge. Make : Havells/ Crompton Greavs/C&S/Baja

Taking down old unserviceable any type fitting and Supply and fixing Energy saving LED flood light 120 watts made up of pressure die cast aluminium housing with toughened glass and high pressure LEDs and secondery lenses with IP66 protection system Cat Part No CFS-504-120-57-60D-SL-GL-NSG, efficiency > 110LPW 10KV SPD Ccomplete fitting including all accessories all as specified and directed by Engineer-in-Charge. Make : Havells/ Crompton Greavs/C&S/Baja

Taking down old unserviceable any type fitting and Supply and fixing Energy saving environment friendly, long life, exclusive innovative die cast aluminium LED flood light 400 watts with highly efficient LEDs as light source suitable for highlighting architectural features or retail space, Make Havells Cat Part No JETAVALOURFL400WLED757MODNBLTG complete fitting including all accessories all as specified and directed by Engineer-in-Charge. Make : Havells/Philips/Baja

Taking down old unserviceable any type of post top lantern fitting and supply and fixing decorative LED post top lantern 20 watt powder coated aluminium die cast and spun aluminium body with clear/opel diffuser suitable for Landscape lighting available in 5700K CCT IP65 input voltage from 120-270 V power factor above 0.95 complete fitting including all accessories all as specified and directed by Engineer-in-Charge. Make : Havells/ Philips/Bajaj .

Taking down old unsv garden light and supply and fixing LED decorative Bollard garden lights suitable for 10 Watt IP65 10 watt in inverted pyramid tropod type LED Bollard with soft 360 light, resistant to corrosion with better optic for uniform distribution complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and as directed by Engr-in-Charge. Make : Havells/ Philips/Bajaj Note for Item No 02 to 11: All the stores will be deposited in MES Yard.

Replacement of PCC poles and installation of Octagonal poles. Supply and install hot dip galvanized steel (IS 5986 Gr. Fe 510) Octagonal pole 7.0 mtr long, top top die 70 mm botom dia 130 mm having thickness 3 mm having door operating of size 500 mm above ground level with CI Base plate of size 240x240x16mm having PCD 220 mm foundation J bolts M20 x 70 mm (530 + 130 of J) nuts and screwes and having hot dip galvanized double plain arm bracket 1000 mm overhang on both side with 48.3 mm outer dia pipe of thickness 3.2 mm fixed on top with bolts complete all as specified. & directred. Make : BAJAJ/CROMPTON/HAVELLS Note: PCC and earth work shall be measured and paid seperately

Supply & Fix junction box factory made weather proof size 250mmx200mmx100mm made of 16 gaugesteel sheet powder coated inculded 25mmx6mm aluminium TPN bus bars & 02 MCB 25 Amps for controlled two No's of LED Lights complete all as specifed & directred

Material & labour for PCC work (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation of electric pole, etc including necessary form work and fare finish to exposed surfaces without using extra cement etc. Complete all as specified.

Supply and fixing in replacement 1100 volt grade heavy duty cable 3 core 1.50 Sqmm PVC insulated copper stranded conductor passing through in 20 mm PVC pipe of cable size size 1.50 Sqmm for connection pupose of street light fitting from DB to street light fitting, Rate of PVC pipe shall be included in quoted rate by contractor complete all as specified and directed by the Engr-in-Charge.

Taking out old unserviceable underground cable from trenches/ floors/road/wall /pipe/ pole LT cable of any size/ description.

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 16 Sqmm 4 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed by Engr-in-Charge.

All As per item No 14 but cross sectional area 16 Sqmm 2 core.

All As per item No 14 but cross sectional area 10 Sqmm 4 core.

All As per item No 14 but cross sectional area 10 Sqmm 2 core.

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation of poles/ stays/ laying of cables etc and getting out including trimming of sides of trenches complete all as specified and directed.

Returning, filling the soft / loose soil including spreading, leveling watering and well ramming in layers not exceeding 25 cms thick each layer complete all as specified and directed.

Removing of surplus excavated soil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specified and directed.

Material and labour for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specified and directed.

M&L for preparation of old painted surface of Steel tubler Street light poles and applying two coats of synthetic Aluminium paint from top to botom including Light breakets complete all as specified and as directed.

Labour only for cutting/pruning of tree branches 1.5 mtr all around the LT overhead lines of span n.exc 70 mtr and around the pole obstruction the overhead line & removing the branches to distance n.exc 50 mtr to be the entire satisfaction of Engineer-in-charge,

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed.

Supply and fix in replacement of Time light distribution board analog Time switch 230 volt three phase of 16 Amps rating with contactor fixed inside steel enclosure box and fixed to pole/LT Panel including clamps, nuts, bolts and washers etc complete all as specified and directed.Make Indo-Asian cat part No TL016ABO or equivalent in Legrand/Scheneider

S & F in replacment MCCB 250 Amp, 4 pole, 36 KA 415 Volt 50 Hz with adjustable thermal release and adjustable magnetic setting complete all as specified and directed. Make : Standard CAT Part No ISLCNF 0250 (Frame size SKB-3) or equivalent CAT part of make Havell's/ Siemen's/ Schnieder)

S & F in replacment MCCB 200 Amp, 4 pole, 35 KA 415 Volt 50 Hz with adjustable thermal release and adjustable magnetic setting complete all as specified and directed. Make : Standard CAT Part No ISLCNF 0250 (Frame size SKB-3) or equivalent CAT part of make Havell's/ Siemen's/ Schnieder)

GULSHAN SINGH GHAI AND SON

M/s Shri Krishna Enterprises

J.K & Company

Kaul Enterprises

PAWAN KUMAR GOVT. CONTRACTORS

TARA ENTERPRISES