WBSIDCL/08 Elec of 2025-26 Sl 1

Amount

Providing experienced labour (unskilled) for treaming the trees & cutting the bushes with own tools & tackles around the pump room, street light poles incl catenary/overhead system so that maintenance people can reach their work site & sweeping cleaning the pump rooms in the campus as & when reqd as per direction of the con cerned SAE/E & AE/E.

Providing service of senior electricians & helpers of removing the dust & dirts from all fittings and fixtures like main switches, panel boards, fans, luminaries (by soap & water), pole top loop boxes/ header etc & tightening all nuts & screws of all fittings, motors, cables & wire terminals incl insulation & earth testing of electric al equipments as & when reqd as per direction of EIC etc & repl acing the materials as stated below by own tools & tackles, mea suring instruments & safety equipmentsetc. incl note down the voltage & current at source & reporting the performance report to the SAE/E or AE/E as per proforma mentioned in the terms & co ndition & depositing theunserviceable materials to the concerned SAE/E time to time.

Electrician (Skilled) cum pump operator (Site as per decission of EIC)

Electrician Helper (Semi Skilled)

Electrician (Skilled)

Supplying of 32A, 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make: L&T/ Havells/ Standard)

Supplying of 6-32A 240V SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make: Havells/ Standard)

Supplying of 6-32A 415V FP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make: Havells/ Standard)

Supply of 7/14 SWG galvanised stranded wire for drawing unarmored cable (supply of cable is not included in the scope) by catenary system of wiring with 3nos. reel insulator per mtr. and binding with binding wires etc,as reqd. for drawing.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

2 core x 10 sqmm

4 core x 10 sqmm

4 core x 16 sqmm

4 core x 25 sqmm

3.5 core x 50 sqmm

Supply of 1.1 KV grade Al.conductor PVC insulated and sheathed unarmoredcable (Make: Gloster/ Havells/ Polycab). 2 core x 10 sqmm

Supply of 1.1KV grade 3 core 1.5 sqmm PVC Insulated, Copper flexible cable. (Make: Polycab/Havells/KEI)

Supply of Galv. ‘D’ iron complete with suitable pole clamp 100mmx114mm porcelain shackle insulator & 19 mm dia Galv. bolts & nuts. incl. painting

Supply of MS Straining Screw (18" long)

Supply of electronic type Driver for 45W LED Street Light Fittings suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. (Make: Philips/Crompton or equ. As approved by EIC)

Supply of Surge protection device for 45W LED Street Light fittings. (Make: Philips/Crompton or equ. As approved by EIC)

Supply of electronic type Driver for 120W LED Street Light Fittings suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. (Make: Philips/Crompton or equ. As approved by EIC)

Supply of Surge protection device for 120W LED Street Light fittings. (Make: Philips/Crompton or equ. As approved by EIC)

Supply of analog timer (Make: L&T) (AUTS03ANA00)

Supply of 415V 32A 3 pole power contactor (Make: L&T- MNX22)

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting

Supply & fixing of 415/440 Volt, HRC fuse (Make: L&T/ Havels/CGL/GE).

For 2-40 Amp

For 50-63 Amp

For 125 Amp

Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections

Connecting the equipments to earth busbar including S & F 8 SWG GI (Hot Dip) wire of size on wall/floor with staples buried inside wall/ floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages

Supply of DOL Starter suitable for 1.0 HP Monoblock pump motor set with all accessories. (Make: L&T- MU-2P Single Phase Starters or equ. As approved by EIC)

Supply of Modular Lamp Holder Batten Type (Make: Anchor)

Supply of 1.1KV grade 3 core 2.5 sqmm PVC Insulated, Copper flat cable suitable for submersible pump motor set. (Make: Gloster/ Havells/ Polycab)

Supply of 9M. Heavy bamboo ladder.

Supply of PCB with LED module suitable for 45W LED Street Light fitting.

Supply of PCB with LED module suitable for 120W LED Street Light fitting.

Supplying and fixing 240V, 40A DP MCB Isolator on din rail of existing DBs and necessary connection. (Make: Standard/ Havells)

Opening the ceiling fan testing, checking & re-winding by supplying super enamelled copper wire of appropriate gauge, minilex paper, mica sheet, changing loops, overhauling, backing, vernishing, re-fitting and using and measuring r.p.m. For ceiling fan.

Supply following Capacitor of 250V rating.

Maintenance of High Mast Lighting System: The following activities are to be carried for the period of one year. (A)Replacing of faulty control gear components: Bringing down the high mast lantern carriage by lowering from 20-meter height of the high mast system to the ground level. 1). Replacing the required faulty components like Ballast, ignitor, capacitor, aviation warning lamps connector blocks,2/3 core 1.5/2.5/4/6 Sq.mm PVC cable and checking the loose connection etc. 2). Replacing the faulty control gear box/luminaries. After replacing the faulty components, the lantern carriage should be raised to its original position without any damage of Gearbox and related components. (B). Maintenance of the mechanical system: - Checking and maintaining the winch system, steel wire rope and required fault correction, checking and toping up the gear box oil and greasing the worm wheel and worm shaft to be carried out at the time of attending the maintenance / Repair and periodical intervals. In case of any failure in Gear box or worm wheel worm shaft the contractor should replace the failed part and resume the winch system in original working condition. Total nos. of high mast light maintenance work to be carried out in the year: 1 no x 1 time = 1 no.

Supply of electronic type Driver for 150/200W LED Flood Light Fittings suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. (Make: Crompton- X150C070V210FNI1B0 or equ. As approved by EIC)

Supply of Surge protection device for 150/200W LED Flood Light fittings. (Make: Crompton- SRPSQ-10KV-440 or equ. As approved by EIC)

Supply of PCB with LED module suitable for 150/200W LED Street Light fitting.

Taking down the ceiling 900/1200/1400 mm sweep (GEC/Crompton/Usha/Havells etc.) with necessary tools and tackles from Ceiling.

Opening the Ceiling Fan 900/1200/1400 mm sweep (GEC/Crompton/Usha/Havell's etc.) with necessary tools and tackles and testing, checking, servicing, overhauling including supplying 23/36 PVC Copper flexible wire up to length 1.0 Meter. And transportation charges etc. and re-fixing the ceiling fan on its original position

Supplying of different types of LED lamps (9W) Make: Philips, 9.0 Watt, Base B22/ E27, 825 lm

Supply Philips LED tube, model no: Mas LED tube 1200mm 18W865 T8 I - 2100lm

S & F water proof 200 watt power supply system IP65, 50/60Hz frequency, 108 to 305V,AC power supply,.085 power factor for LED lamp.(Approved make),

S&F 230V, 1.5 Watt LED module inside the acylic sheet letter. One run |for each leter including wiring (Make- Sumsung/ OSRAM

Supply and fixing specíal type of imported acrylic letter (3 mm thick) projected on the ACP board 62.5 mm. The letter font shall be in horizontal line.

Supply of electronic type Driver for 90W LED Street Light Fittings suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. (Make: Philips/Crompton or equ. As approved by EIC)

Supply of PCB with LED module suitable for 90W LED Street Light fitting.

Withdrawing the submersible pump motor set with the existing Column pipe with special types of tools and tackles and chain pully block etc.

After repairing the pump motor set installation the repair submersible pump motor set with the Column pipe and special types of tools and tackles and chain pully block etc.

Rewinding the motor stator coil with poly double coated copper winding wire with proper dressing cable vulcanizing and testing.

MAA SIDDHESWARI ENTERPRISE (BID ID -6470845)

GAUTAM ENTERPRISE (BID ID -6489464)

S. ENTERPRISE (BID ID -6482801)

SONA ENTERPRISE (BID ID -6492927)