Job 1 Construction of Mini Stadium in Govt. Senior. Secondary School Basdehra, Tehsil and District Una H.P Sub Head C.O Pavilion Sitting Tiers, Breast ball Ground and Toilets with WS and SI, Septic Tank and Soak Pit etc.

Amount

Excavation in foundation trenches etcetera in all classification of soil such as pick work,jumper work,pick jumper work,blasting work and hard blasting work in dry or saturated condition upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable material separately as directed and then returning the stacked soil in 15cm(fifteen centimeter) layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as directed by the Engineer in charge including entire carriage of material and disposal all surplus excavated/bored out earth within all leads and lifts and other incidentials .Any loss to the public /private property during the course of execution shall be abssolute respossibility to the contractor which shall have to be duly compensated by him in all cases as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Earth work in excavation for all type of road structure and all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks ( Where blasting is prohibited) such as retaining walls, breast walls, culverts, drains and parapets etcetera as per drawings and technical specification clause 305.1 and as per direction of the Engineer- In – Charge including setting out construction of shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty millimetres) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth and any quantium of water including cleaning of slush which may arrise out during dewatering as per direction of Engineer-in-Charge. including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Construction of embankment with approved materials obtained from borrow pits deposited at site from road way, excavation of other road structures or other sources laid in layers of suitable thickness not exceeding 200mm( two hundred millimeter) and compacted with 80-100 (eighty-hundred)KN.static/ vibratory road roller to meet the requirements of table 300.1 and 300.2 specifications to lines,grades,level and cross sections as per drawings or directions of the Engineer-in-charge including preparation of foundation for embankment in all kinds and classification of soils including saturated soil and dewatering/ bailing out of water wherever required including handling of materials for construction of embankment within all leads and lifts.The rate shall include carriage of machineries, equipment, tools and materials and safety measures, as per direction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentials.The rate including octroi, royality, malkana, toll tax, sale tax ,or other taxes imposed by the Government.

Dressing the ground including cutting and filling upto 15cm.in spade work including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Filling in plinth with sand under floor including watering ramming consolidating and dressing complete for all heights including entire carriage of material and disposal all surplus excavated/bored out earth within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm ( thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for insitu reinforcement and plain concrete work in foundation footing and bases of columns etcetera and mass concrete in all height and depth including carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm( three decimal fifteen millimeter ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars, posts and struts square rectangular or polygonal in plan in any height upto all floor level including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimetre ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) size so as to give a fair finish including centering ,shuttering ,strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work in:- beams cantilevers girders and lintels side and soffit of beams ,beam haunchings, cantilevers, bressumers and lintels in any depth / heights /thickness upto all floor level including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs landings and the like floors in all thickness in all floor level including carriage of material entire within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter)so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landing complete upto floor all level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimetre) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre) size so as to give fair finish including centering ,shuttering ,strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work:- in edges of slabs and breaks in floors and walls etcetera upto any width /height complete upto all floor level including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters buttresses,plinth and string courses and the like upto all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (one cement: six sand:twelve graded crushed stone aggregate 40mm( forty millimeter nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth in all heights / depths including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1 : 5 : 10 ( one cement : five sand : ten graded crushed stone aggregate 40mm(forty millimetre nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth upto all level including carriage of material with in all leads and lifts and other incidental. .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying cement concrete 1:4:8 (one cement: four sand:eight graded crushed stone aggregate 40mm( forty millimeter nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth in all heights / depths including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/ reinforced concrete in open foundation/ for all type structure complete of plain cement concrete nominal mix 1:4:8 ( One cement :four sand:eight graded crushed /broken stone aggregate 40mm (forty Millimeter) nominal size in or under water and curing complete including pumping or bailing out water,dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/ depths including the cost of form work as per drawings and technical specification Clause 802.803.1202 and 1203 as per the direction of the Engineer-in- charge including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying mechanically mixed and vibrated concrete for plain/ reinforced concrete in open foundation/ for all type structure complete of plain cement concrete grade M-10 (M-Ten) in or under water and curing complete including pumping or bailing out water,dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/ depths including the cost of form work as per drawings and technical specification Clause 802.803.1202 and 1203 as per the direction of the Engineer-in- charge ,including carriage of material within all leads and lifts and other incidential. The rates inclusive octroi royalilty. Malkana toll tax ,sale tax, or other taxes imposed by the Govermment.

Providing and laying mechanically mixed and vibrated concrete for plain/ reinforced concrete in open foundations upto all heights for all type structure complete of plain with cement concrete standard concrete design mix of grade M-20 (M-twenty) cement contents not less than 330kg.(three hundred thirty kilogram) per cubic metre in or under water and curing complete including pumping or bailing out water,dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/ depths including the cost of form work as per drawings and technical specification Clause 802.803,1202 and 1203 as per the direction of the Engineer-in- charge ,including carriage of material within all leads and lifts and other incidential. The rate including of octroi royalilty. Malkana toll tax sale tax or other taxes imposed by the Govermment.

Providing weepholes in brick masonry/ stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100mm(hundred milimetre)dia PVC pipe extending through the full width of the structures with slope of 1(v):20(H)(one vertical twenty horzontial) towards drawing face complete as per drawings and technical specification clause 614,709,1206.6 including carriage of material within all leads and lifts and other incidential. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government

Back filling behind abutment, wing wall and return wall complete as per drawings and technical specification clause 1206.3 including carriage of material within all leads and lifts and other incidentials. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, or other taxes imposed by the Government

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in foundation,footing bases of columns and the like and mass concrete in all depth/heights including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts up to all heights in all floor level complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimeter square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in suspended floors, roofs, landing and shelves and their supports balconies beams,girders, bressumers and cantilevers upto all floor level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimeter square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in stair cases(except spiral stair case) excluding landing but including the preparing of the surface and finishing of nosing upto all heights in all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimeter square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in Walls (any thickness but not less than 0.10 metre (zero point ten meter thickness) including attached pilasters buttersses,plinth and string courses etcetera from top of foundation in all height/depth in all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying tor steel(Sail/RINL/Shyam steel Tisco, Jindal panther (JSPL) make) reinforcement for reinforced cement concrete work including ,bending binding,straightening and placing in position complete in all floor level/ heights including cost of binding wire complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Providing and laying damp proof course 38mm (thirty eight millimeter)thick with cement concrete 1:2:4 (One cement:two sand:four graded crushed stone aggregate 12.5mm (twelve point five millimeter )nominal size) and curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100(eighty/hundred) or equivalent using 1.70 kg. (one point seventy kilogramme)per square meter on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Random rubble masonry / polygonal rubble masonry (uncoursed / brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 ( one cement:six sand:twelve graded stones aggregate 20 mm (twenty millimetre) nominal size at plinth level in cement mortor 1:6 (one cement :six sand)including carriage of material within all leads and lifts.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in foundation and plinth in cement mortar 1:6(one cement: six sand ) including curing complete in any depth/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Second class half brick masonry in common burnt clay building bricks in Cement mortar 1:4(One cement four sand) to foundation and plinth including curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in superstructure above plinth level upto all floor level /height in cement mortar 1:6(one cement: six sand ) including curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

Second class half brick masonry in common burnt clay building bricks in cement mortor 1:4(One cement :four sand) in superstructure in all floor level/height curing complete and including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing angle iron single rebate door frame manufactured from San Harvic, steel man industries, PD industries, Metal window ,Chandni industries, Ganpati Udyog (Raipura) MS angle iron section including hinges,jamb,lock jamb,beed and if required angle thrashold of mild steel single rebate angle 40x40x5mm (forty into forty into five millimetre ) and M.S. flat 50x5mm (fifty into five millimetre ) to make square hollow section and hold fast of M.S. flat 200x40x3mm ( two hundred into forty into three millimetre ) welded all corners and joints and embeded in CC block 1:3:6 ( one cement : three sand : six graded stone aggregate ), 100x100x100mm ( one hundred into one hundred into one hundred millimetre ) size including hinges and applying a coat of red lead paint and fixing in position complete as per architectural drawing including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing angle iron double rebate door frame manufactured from MS San Harvic, steel man industries, PD industries, Metal window ,Chandni industries, Ganpati Udyog (Raipura) MS angle iron section including hinges,jamb,lock jamb,beed and if required angle thrashold of mild steel double rebate angle 40x40x5mm (forty into forty into five millimetre ) welded together with 2 No. M.S. flat 12x5mm ( twelve into five millimetre ) and one No. flat 50x5mm (fifty into five millimetre) to make one frame with steel hinges 2.5mm (two point five ) thick with provision of locking arrangement and shock observers and applying a coat of red lead paint and embeded in CC block 1:3:6 ( one cement : three sand : six graded stone aggregate ), 100x100x100mm ( one hundred into one hundred into one hundred millimetre ) size including hinges and applying a coat of red lead paint and fixing in position complete as per architectural drawing including carriage of material with in all leads and lifts and other incidentalsThe rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing steel window made of frame with M.S. Channel 75x40mm(seventy five into forty millimetre ) and San Harvic, steel man industries, PD industries, Metal window ,Chandni industries, Ganpati Udyog (Raipura) M.S. flat/plate 75x40mm (seventy five into forty millimetre ) to make one frame providing double rebate with making square steel section with mild steel flat of 20x4mm (twenty into four millimetre ) and 12x4mm (twelve into four millimetre ) shutter of Z section including glass panes of 4mm thick in glazed panels and wire gauge of designation 85 G (eighty five ) with wire of 0.56 mm(zero point fifty six millimetre ) in wire gauge pannel and fixed glazing fixed with angle and T section 25x25x3mm (twenty five into twenty five into three millimetre ) and M.S. flat of 12x4mm (twelve into four millimetre ) in sash bars duly welded of all corner and joints properly holdfast of M.S. flat 200x50x5mm (two hundred into fifty into five millimetre ) duly welded of corner and joints of all steel sections embeded in CC block 1:3:6 ( one cement : three sand : six graded stone aggregate ), 100x100x100mm ( one hundred into one hundred into one hundred millimetre ) size including fittings such as handles tower bolts hooks and eyes and applying a coat of red lead paiant and fixing in position complete as per architectural drawings including carriage of material with in all leads and lifts and other incidentals. The rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing M.S. grills (San Harvic, steel man industries, PD industries, Metal window ,Chandni industries, Ganpati Udyog (Raipura) make of required pattern in wooden /steel/ frames of windows etcetera fix glazed which shall be with M.S. flats 20x5mm(Twenty into five millimetre and 8x8mm (eight into eight millimetre) square or round bars with round headed bolts and nuts or by screws plain grill including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 19mm (ninteen millimetre)thick water proof termite resistant commercial board Novapan , Kitply, National, Archid ply, Action Tesa, Green (Box type) including shelves and shutters. Backside of cupboard shall be finished with 8mm(eight millimetre) thick ply water proof All cut portion of the shelves and the shutters of cupboard from all side to be finished with 12mm(tweleve millimetre ) thick hard wood edging, including providing mortice lock as per architectural drawing complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing(factory made) 35mm(thirty five millimetre) thick flush door shutters make of kutty Flush door, kitply industries (Swastik) Jawala samrat Laminatet Pvt.Ltd.(Samart) CNC commerical Ltd.(Shivalik) S.R Jindal Ply wood industries (Prima) interior grade, commercial board i.e. non decorative phenol bonded terimite resistant and water proof , core of black-board construction with full frame of first class hard wood and well matched commercial three ply veneering with vertical grains or cross bands and face veneers on both faces of flush dooer ISI marked IS No.2202 of century ply board(1) Ltd. or its equipment including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 40mm thick (forty millimetre ) second class deodar wood frame fly wire mesh shutters using galvanized MS wire mesh of I.S.gauge designation 85G(eighty five )with wire of dia 0.56mm(zero point five six millimetre)for doors windows and clerestory windows including bright finished black enameled iron hinges with necessary screws including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing anodized aluminium sliding door bolts anodized colour or shade with bolts and nuts screws etcetra complete including carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. 250×16mm(two hundred fifty into sixteen millimeter)

Providing and fixing anodized aluminium tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. 250×10mm(two hundred fifty into ten millimetre)

Providing and fixing anodized aluminium tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government 150×10mm(one hundred fifty into ten millimetre)

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government 125mm(one hundred twenty five millimeter)

Providing and fixing bright finished or/and black enamelled iron(Helical door spring 150mm(one hundred fifty millimetre) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government 125mm(one hundred twenty five millimeter)

Providing and laying marble work ( table rubbed and polished) in flooring 20mm(twenty millimetre) thick base in cement mortar 1:3 (one cement : three sand) including jointed with cement mortar 1:2 (one white cement :two marble dust) with an admixure or pigment to match the shade of marble including rubbing and polishing complete 20mm(twenty millimetre) thick Baroda green marble semi round nosing including carriage of materials within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 10mm(ten millimetre) thick anti skid water proof stain and impact resistent heavy duty vetrified tiles Nitco /Kajaria (600x600x10mm)(six hundred intosix hundred into ten millimetre)manufactured of approved shade and colour in flooring treads of steps and landing laid on a bed of 12mm(twelve millimetre) thick cement mortor 1:3( one cement: three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tiles as required complete iincluding carriage of materials within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government...

Providing and laying Duro stone vetrified tiles Nitco/orient/kajaria equivalent (600x600x8mm)(six hundred into six hundred into eight millimetre) in grey/ coloured of approved shade in skirting risers of steps and dado on 12mm(twelve millimetre) thick cement mortor 1:3( one cement: three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government...

White glazed tiles 200x300mm (two hundred into three hundred millimetre) 6mm thick ( six millimeter ) thick make of Kajaria, Nitco, somany, orient, Rak , Johnson and Johnson in skirting risers of steps and dado 12mm(tweleve millimeter) thick cement mortor 1:3 ( one cement: three sand) and jointed with neat cement slurry including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

40mm (forty millimetre ) thick Cement concrete flooring 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm(twenty millimeter ) nominal size laid in one layer finished with a floating coat of neat cement complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 150mm(one hundred fifty millimeter) dia on wall face PVC (D-plast) supreme, AKG, Finolex, Prince Kisan, SFMC make rain water pipe of working pressure not less than 4.5 kg (four point five kilogramme)per square centimeter including filling the joints with approved adhesive complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing on wall faces PVC (D-plast)supreme, AKG, Finolex, Prince Kisan, SFMC make accessories for rain water pipes including filling the joints with approved adhesive complete PVC plain bend 150mm ( one hundred fifty millimeter) dia including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing on wall faces PVC (D-plast)supreme, AKG, Finolex, Prince Kisan, SFMC make accessories for rain water pipes including filling the joints with approved adhesive complete PVC plain shoe 150mm ( one hundred fifty millimeter) dia including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing pre painted steel sheet made of Tata Durashine in roofing over all steel trusses with hot applied metallic zinc coated Kolar Metal or its equivalent pre painted single skin trapezoidal profile sheeting 0.60mm (zero point six zero millimeter) thickness having 1060 mm (one thousand sixty millimeter) cover width, overall width 1126mm (one thousand one hundred twenty six millimetres), 28mm (twenty eight millimetres) crest depth at 353+2mm (three hundred fifty three plus two millimeter) centre to centre crest distance, having two ribs at the centre for stiffening having crest depth of 2.5mm (two point five millimeter). The main crest width at top of 25mm (twenty five millimeter) and at lower 81mm (eighty one millimeter) base metal of cold rolled steel coil with zinc coating. Top coating with regular modified polyester (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating of polyester to back coat of 5 (five) microns over 5 (five) microns primer coating including fixing with self tapping screws 5.5mm (five point five millimeter) dia and 5.5cm (five point five centimeter) length with as required with EPDM seal complete as per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing ridges or hiops 60cm(sixty centimetre) overall with 0.60mm (zero point sixty millimeter)thick prepainted sheet Tata Durashine made in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20(twenty ) microns over 5(five) microns primer coating + back coat of polyster of 5(five) microns over 5(five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm(six millimeter) dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing valley 60 cm(sixty centimeter) overall 0.60mm (zero point sixty millimetre) thick prepainted steel sheet Tata Durashine made in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5(five)microns over 5(five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm(six millimeter) dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing M.S.BP sheet 1.66mm to 2mm(one point sixty six millimeter to two millimeter) thick in eaves board/facia/soffits/ceiling including cutting,fixing and welding to steel roof members and applying a coat of red lead primer complete as per instruction of Engineer-in-charge(Base members of steel work shall be measured & paid separately) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Steel work(San Harvic, steel man industries, PD industries, Metal windows ,Chandni industries, Ganpati Udyog (Raipura) ) welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint complete in all respect in trusses and trussed purlins in buildings in all height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Steel work(San Harvic, steel man industries, PD industries, Metal windows ,Chandni industries, Ganpati Udyog (Raipura)) welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint complete in all respect In grating, framed guard bars ladders, railing brackets and similar works in all height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Provding and fixing stainless steel 9Grade 304) railing made of hollow tubes, channels, plates etcetra including welding, grinding, buffing, polishing and making cirvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories and stainless steel dash fastners, stainless steel bolts etcetra of required size , on the top of the floor or the side of wasit slab with suitable arrangement(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etcetra) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 85 cm(eighty five centimetre) high rail having baluster of 19 mm x 19 mm(ninteen millimetre into ninteen millimetre) size and 12 mm x 12 mm (tweleve into twelve millimetre) M.S. solid square bars in combination with MS flat of 40 mm(forty millimetre x 5 mm(five millimetre) size with PVC hand rail baluster dully welded/jointing with electric gas welding with top MS flat including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 7.5cm. thick concrete Jali including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing IRC Fabric Jali hard drawn steel wire fabric 75x25mm mesh of weight not less than 7.75kg. per square metre to window frames etcetra including 60x20mm beading of second class Indian Teak wood including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing in RCC work smooth finishing of the exposed surface with cement mortor 1:3(One cement:three sand) in all floor level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

6mm (six millimetre)Cement plaster to ceiling in all floor level in Cement mortar 1:3(One Cement:three Sand) including curing and carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

15mm (fifteen millimetre)cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering in all floor level/height including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm(eighty millimeter) in girth and finished even and smooth in cement mortar 1:6 ( one cement : six sand) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

15mm(fifteen millimetre) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto any floor level/height including arrises, internal rounded angle, chamfers and/or rounded angles not exceeding 80mm (eighty millimeter)in girth and finished even and smooth in cement mortar 1:6 (1 cement : 6 sand) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Applying (JK wall Putty/ Birla white putty )over plaster surface after thoroughly brushing the surface free from mortar dropping dust loose materials and other foreign matter sand papered smooth to give final finish to the surface complete upto all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer. of Berger( castlc) Jenson & Nicholson(J & N) Golden, paints Aqualac make complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Applying one coat of Acrylic primer(Spectrum or equivalent of superior quality) on new concrete/ masonry/ plastered surfaces after and including preparing the surface by throughly brushing the cleaning the surface to remove all dirt , dust and other foreign matter etcetra including sand paper smooth complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including sand papered smooth surface of ICI(Dulux Gloss) Nerolac, Berger(Luxor High Gloss) Asian Paints(Premium AP colite Gloss) shalimar make complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand papering complete including carriage of materials within all leads and lifts :With ready mixed priming paint brushing red lead, red oxide / zinc oxide chrome make of ISI Nerloac, Berger, Asian opaints, shalimar including carriage of materials within all leads and lifts. The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of materials within all leads and lifts. The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government. Enamel paint other than white ICI(Dulux Gloss) Nerolac, Berger(Luxor High Gloss) Asian Paints(Premium Apcolite Gloss) shalimar

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting readymixed paint brushing primer pink make of ICI, Nerolac, Berger Asian paints, shalimar including carriage of material with in all leads and lifts and other incidentials The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Painting of two coats (excluding priming coat) over new wood and wood based surfaces with enamel paint other than white make of ICI(Dulux Gloss) Nerolac, Berger(Luxor High Gloss) Asian Paints(Premium Apcolite Gloss) shalimar brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping including carriage of material with in all leads and lifts and other incidentials The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Writing letters or figures on any surface with black Japan Paint, Indian(letters/ figures) including carriage of material with in all leads and lifts and other incidentials The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and erecting direction and place identifications of semi reflective sign boards as per IRC :67 made of 2mm (two millimetre ) thick M.S.sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70mm(seventy millimetre ) width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour supported and welded on 47mmx47mm (forty seven millimetre into forty seven millimetre ) of 12SWG square tube of 3050 mm (three thousand fifty millimetre ) height duly strengthened by 25mmx5mm (twenty five millimetre into five millimetre ) M/S flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15(M-fifteen) grade cement concrete 450mmx450mmx600mm, (four hundred fifty millimetre into four hundred fifty millimetre into six hundred millimetre ) 600mm (six hundred millimetre )below ground level as per approved drawing and technical specification clause 1701.including carriage of materail within all leads and lifts .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying heavy duty precast cement concrete interlocking paver blocks vibro compacted upto M-50 (fifty) grade including border or kerb block grey or coloured over sub base of concrete with 25mm (twenty five millimetre ) thick average thickness of cement mortar 1:4 ( One cement : four sand ) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete. 60mm ( sixty millimetre ) thick inter locking blocks NTC or its equivalent Make including carriage of material within all leads and lifts and other incidentials.The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing under layer for plinth protection of 75mm(seventy five millimeter) thick (unconsolidated) bed or dry brick/stone aggregate 40mm(forty millimeter) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material within all leads , lifts and other incidental.The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing plinth protection 50mm(fifty millimetre ) thick in cement concrete 1:3:6(one cement: three sand: six graded crushed stone aggregate 20mm( twenty millimetre ) nominal size including carriage of materail within all leads and lifts .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Demolition below G.L upto 1.50 metres depth and disposal of unserviceable material within 20mm(twenty millimetre) lead un-reinforced cement concrete more than 15cm(fifteen centimetre). thickness iincluding carriage of materail within all leads and lifts .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Demolition of brick work above G.L.upto flor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20mm(twenty millimetre) lead in cement mortor including carriage of materail within all leads and lifts .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing Basketball pole(One pair) including carriage of materail within all leads and lifts .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Supplying and filling crushed stone aggregate in soak pit of sizes 12mm(tweleve millimetre) nominal bore including carriage of material within all leads and lifts and other incidentials.The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Supplying and filling crushed stone aggregate in soak pit of sizes 25mm(twenty five millimetre) nominal bore including carriage of material within all leads and lifts and other incidentials.The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Supplying and filling crushed stone aggregate in soak pit of sizes 90mm(ninety millimetre) nominal bore including carriage of material within all leads and lifts and other incidentials.The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) make of B.S.T.Jindal(Hissar) Tata steel tubes Ltd. prakash surya tube fittings and clamps including making good the wall ceiling and floor 25mm(twenty five millimetre) nominal bore ncluding carriage of material within all leads and lifts and other incidentalsThe rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying in trenches galvanised mild steel tubes (medium grade ) make of B.S.T.Jindal(Hissar) Tata steel tubes Ltd. prakash surya tube fittings (Earth work in trenches to be measured and paid for separately 25mm (twenty five millimtre nominal bore) including carriage of material within all leads and lifts other incidentalsThe rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing polytheline-aluminium polyethylene(PE-AL-PE) composite pressure pipe UV stabilized with carbon black confirming to IS-15450-2004 make of Kitch water supply, including clamps at 1.00mtr. (one metre) spacing cutting fixing and making good the wall etc. but excluding the cost of fittings including testing of joints complete as per direction of Engineer in charge including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.. 1216 (16mm O.D.pipe)

Providing and fixing polytheline-aluminium polyethylene(PE-AL-PE) composite pressure pipe UV stabilized with carbon black confirming to IS-15450-2004 make of kitch water supply,including clamps at 1.00mtr. (one metre) spacing cutting fixing and making good the wall etc. but excluding the cost of fittings including testing of joints complete as per direction of Engineer in charge including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.. 1620(20mm O.D.pipe)

Providing and fixing composite end seal compression fittings as per IS 15450-2004 make of Kitch for cold water supply tees,elbows,reducers connector ouplers and clamps with jointing testing and fixing complete including cutting and making good the wall etc. complete as per direction of E-in-c. including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.. Equal tees 1216

Providing and fixing composite end seal compression fittings as per IS 15450-2004 make of Kitch for cold water supply tees,elbows,reducers connector ouplers and clamps with jointing testing and fixing complete including cutting and making good the wall etc. complete as per direction of E-in-c. including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.. Equal tees 1620

Providing and fixing composite end seal compression fittings as per IS 15450-2004 make of Kitch for cold water supply tees,elbows,reducers connector ouplers and clamps with jointing testing and fixing complete including cutting and making good the wall etc .complete as per direction of E-in-c. including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Reducing Tees 1620 x all branches

Providing and fixing composite end seal compression fittings as per IS 15450-2004make of Kitch for cold water supply tees,elbows,reducers connector ouplers and clamps with jointing testing and fixing complete including cutting and making good the wall etc. complete as per direction of E-in-c. including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Reducing tee 2025 all branches

Providing and fixing composite end seal compression fittings as per IS 15450-2004 make of Kitch for cold water supply tees,elbows,reducers connector ouplers and clamps with jointing testing and fixing complete including cutting and making good the wall complete as per direction of E-in-c. including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Female branch Tee i)1216x1216x15mm thread

Providing and fixing composite end seal compression fittings as per IS 15450-2004 make of Kitch for cold water supply tees,elbows,reducers connector ouplers and clamps with jointing testing and fixing complete including cutting and making good the wall etc.complete as per direction of E-in-c. including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Female branch Tee1620x1620x20mm thread

Providing and fixing composite end seal compression fittings as per IS 15450-2004 make of Kitch for cold water supply tees,elbows,reducers connector ouplers and clamps with jointing testing and fixing complete including cutting and making good the wall etc.complete as per direction of E-in-c. including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Female elbows i)1216x15mm thread

Providing and fixing composite end seal compression fittings as per IS 15450-2004 make of Kitch for cold water supply tees,elbows,reducers connector ouplers and clamps with jointing testing and fixing complete including cutting and making good the wall etc.complete as per direction of E-in-c. including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Female elbow 1620x15mm thread

Providing and fixing composite end seal compression fittings as per IS 15450-2004 make of Kitch for cold water supply tees,elbows,reducers connector ouplers and clamps with jointing testing and fixing complete including cutting and making good the wall etc.complete as per direction of E-in-c. including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Male thread connector i)1216x15mm thread

Providing and fixing composite end seal compression fittings as per IS 15450-2004 make of Kitch for cold water supply tees,elbows,reducers connector ouplers and clamps with jointing testing and fixing complete including cutting and making good the wall etc.complete as per direction of E-in-c. including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Male thread connector 1620x15mm thread

Providing and fixing composite end seal compression fittings as per IS 15450-2004 make of Kitch for cold water supply tees,elbows,reducers connector ouplers and clamps with jointing testing and fixing complete including cutting and making good the wall etc.complete as per direction of E-in-c. including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Female thread connector i)1216x15mm thread

Providing and fixing composite end seal compression fittings as per IS 15450-2004make of Kitch for cold water supply tees,elbows,reducers connector ouplers and clamps with jointing testing and fixing complete including cutting and making good the walletc. complete as per direction of E-in-c. including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Female thread connector 1620x15mm thread

Providing and fixing composite end seal compression fittings as per IS 15450-2004 make of Kitch for cold water supply tees,elbows,reducers connector ouplers and clamps with jointing testing and fixing complete including cutting and making good the wall etc.complete as per direction of E-in-c. including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Couplers 1216

Providing and fixing composite end seal compression fittings as per IS 15450-2004 make of Kitch for cold water supply tees,elbows,reducers connector ouplers and clamps with jointing testing and fixing complete including cutting and making good the wall etc.complete as per direction of E-in-c. including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Couplers 1620

Providing and fixing composite end seal compression fittings as per IS 15450-2004make of Kitch for cold water supply tees,elbows,reducers connector ouplers and clamps with jointing testing and fixing complete including cutting and making good the wall etc.complete as per direction of E-in-c. including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Reducers i)1620x1216

Providing and fixing composite end seal compression fittings as per IS 15450-2004 make of Kitch for cold water supply tees,elbows,reducers connector ouplers and clamps with jointing testing and fixing complete including cutting and making good the wall etc.complete as per direction of E-in-c. including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Reducers 2025x1216

Providing and fixing PE-AL-PE- composite internal seal compressing fittings as per IS-15450-2004 make of Kitch for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing testing and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including carriage of material with in all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.. Equal tees 1216

Providing and fixing PE-AL-PE- composite internal seal compressing fittings as per IS-15450-2004 make of Kitch for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including carriage of material with in all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.. Equal tees 1620

Providing and fixing PE-AL-PE- composite internal seal compressing fittings as per IS-15450-2004 make of Kitch for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including carriage of material with in all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.. Reducing Tee 1620x all branches

Providing and fixing PE-AL-PE- composite internal seal compressing fittings as per IS-15450-2004 make of Kitch for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including carriage of material with in all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Reducing Tee-2025x2025 with all branches

Providing and fixing PE-AL-PE- composite internal seal compressing fittings as per IS-15450-2004 make of Kitch for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including carriage of material with in all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Female branch Tee 1216x1216x15mm thread

Providing and fixing PE-AL-PE- composite internal seal compressing fittings as per IS-15450-2004 make of Kitch for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including carriage of material with in all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Female branch Tee 1620x1620x20mm thread

Providing and fixing PE-AL-PE- composite internal seal compressing fittings as per IS-15450-2004 make of Kitch for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including carriage of material with in all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Female elbows 1216x15mm thread

Providing and fixing PE-AL-PE- composite internal seal compressing fittings as per IS-15450-2004 make of Kitch for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including carriage of material with in all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Female elbows 1620x15mm thread

Providing and fixing PE-AL-PE- composite internal seal compressing fittings as per IS-15450-2004 make of Kitch for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including carriage of material with in all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Male thread connector 1216x15mm thread

Providing and fixing PE-AL-PE- composite internal seal compressing fittings as per IS-15450-2004 make of Kitch for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including carriage of material with in all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Male thread connector 1620x15mm thread

Providing and fixing PE-AL-PE- composite internal seal compressing fittings as per IS-15450-2004 make of Kitch for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including carriage of material with in all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Fe-male thread connector 1216x15mm thread

Providing and fixing PE-AL-PE- composite internal seal compressing fittings as per IS-15450-2004 make of Kitch for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including carriage of material with in all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Fe-male thread connector 1620x15mm thread

Providing and fixing PE-AL-PE- composite internal seal compressing fittings as per IS-15450-2004 make of Kitch for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including carriage of material with in all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Couplers 1216

Providing and fixing PE-AL-PE- composite internal seal compressing fittings as per IS-15450-2004 make of Kitch for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including carriage of material with in all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the GovernmentCouplers 1620

Providing and fixing PE-AL-PE- composite internal seal compressing fittings as per IS-15450-2004 make of Kitch for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including carriage of material with in all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Reducers 1620x1216

Providing and fixing PE-AL-PE- composite internal seal compressing fittings as per IS-15450-2004 make of Kitch for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) including carriage of material with in all leads and lifts and other incidentals The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government Reducers 2025x1216

Making connection of galvanized mild steel distribution branch with galvanized MS main 20mm(twenty millimeter) to 40mm (forty millimeter) nominal bore by providing and fixing tee complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax sale tax,,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC water storage tank of 12701 ISI marked of approved brand and make (Sintex ) with 40mm (forty milimeter) nominal bore galvanised mild steel scour tube with fitting, 25mm(twenty five milimeter) nominal bore galvanised mild steel over flow tube with fittings and mosquito proof coupling of approved municipal design 15mm (fifteen milimeter) nominal bore ball valve and cover with locking arrangement providing pads of required sizes for inlet and outlet etcetera . complete including hoisting at roof level height ground level 2000 litres (two thousand)net capacity tank complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc.complete75mm(seventy five millimetre) dia make of Finolex including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc.complete110mm(One hundred ten millimeter) dia make of Finolex including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc.complete175mm(One hundred seventy five millimeter) dia make of Finolex including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm(three millimetre) thick bolts and nuts ISI marked make of Finolex complete including fixing with approved adhesive etc. complete 75mm(seventy five millimetre) dia including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing PVC plain bend ISI marked make of Finolex including fixing with approved adhesive etc. complete 75mm(seventy five millimetre) dia including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

b) 110mm(one hundred ten millimetre) dia

Providing and fixing PVC collars ISI marked Finolex make including fixing with approved adhesive etc. Complete , 75mm(seventy five millimetre) dia including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

b) 110mm(one hundred ten millimetre) dia

Providing and fixing PVC floor trap Finolex make of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floors etcetera complete 110mmx75mm(one hundred ten into seventy five millimeter) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government.

Providing and fixing vitreous china wash down, water closet squatting pan (Indian type WC pan ) size 580mm (five hundred eighty millimeter) (earth work, bed concrete ,foot rest and trap to be measured and paid for separately) (Orissa pattern size 58x40mm (fifty eight into forty millimeter) in white shade of Cera /hindware sanitary ware parry ware Neycer make ) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing vitreous china wash down water closet (European type WC pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 ( 1cement : 1 sand )( Seat and cover to be measured and paid for separately ) Anglo Indian (Universal closet No.2090 of Cera Parrware , Hindware sanitary ware, Neycer make closet complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm(four hundred thirty into two hundred sixty into three hundred fifty millimeter) and 340x430x265mm(three hundred forty into four hundred thirty into two hundred sixty five millimeter) size respectively with automatic flushing cistern with fittings R.S or CI brackets standard size galvanised steel flus pipe and spreader with brass unions and GI clamps complete including painting of cistern and fittings cutting and making good the walls floors where required one urinal basin with 5 liters automatic flushing cistern make of Parryware, Hindware sanitary , Neycer, Cera complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing plastic seat (solid/Hollow type) and cover for wash down water closet with CP brass hinges and rubber buffers solid type (i)white plastic seat and cover make of commander Diplomat Hindware, Admiral , Cera complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PTMT ZET spray of approved quality and colour with 1.50 meter)one point fifty metre) tube make of Prayag including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing PTMT coloured/white automatic flushing cistern make of Prayag with a pair of PVC/CI/MS bracket complete with fittings including PVC syphonic apparatus mosquito prory lid PVC union and coupling for connection with inlet,outlet and overflow pipes including catcher holes and making good the same (over flow pipe to be measured and paid for separately) 10 litres net capacityincluding carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing PVC 'P' or 'S' trap for water closet (squatting pan ) ISI marked make Prayag , Viking including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete 110mm(One hundred ten millimetre) dia including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings flat back 550mmx400mm (five hundred fifty into four hundred millimetre) No. 1001of hindware Parrayware sanitary wars , Neycer, Cera in white shade including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing 32mm(thrity two millimetre) dia lead waste pipe for wash basin or sink including brass check nuts including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 100mm(One hundred millimetre) dia sand cast iron make of prefect, Hind or ISI marked S.W.pipe grating for gully floor Nahni trap including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 600mm x 450 mm(six hundred milimetre into four hundred fifty millimeter) bevelled edge mirror of superior glass mounted on 6mm (six milimeter) thick A.C. sheet or plastic sheet and fixed to plastic plugs with CP brass screws and washers make of Atul, Modiguard, Golden Fish complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing CP brass towel rail (heavy duty Make of Kingston, Gem , Parko, Techno,Jal,ESS.Jaguar. Seiko complete with CP brass brackets fixed to wooden plugs with CP brass screws 600mm x 20mm (six hundred milimetre into twenty millimeter) size including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing CP brass toilet paper holder make of Jaguar,Kingston, Gem, Parko, Techno,Jal,ESS.Seiko complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 15mm(fifteen millimeter) dia CP brass bib tap(long nose )(Superior heavy duty) ESS Jaguar kingston , Gem, Parko, Techno, Jal, Seiko make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing 15mm(fifteen millimeter) dia CP brass pillar tap with capstan head ESS, Jaguar kingston , Gem, Parko, Techno, Jal, Seiko make including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Extra over for a pair of holes for pillar taps instead of single hole including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings in white shade of Cera Parry ware Hindware Sanitary ware Neycer complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC connection with brass union 45cms.(forty five centimeter) Length 15mm nominal bore (fifteen millimeters) Finolex make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre)dia CP angle valve kingston , Gem, Parko, Techno, Jal, ESS, Jaguar, Seiko make without nuts and pipe (heavy duty including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing 20mm(twenty millimeter) nominal bore brass fullway valve with wheel Kingston , Gem, Parko, Techno, Jal, ESS, Jaguar, Seiko make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Providing and fixing 25mm(twenty five millimeter) nominal bore brass fullway valve with wheel Kingston , Gem, Parko, Techno, Jal, ESS, Jaguar, Seiko make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Providing and fixing 600mmx120mm(six hundred into one hundred twenty millieter) glass shelf with CP brass brackets and guard rail fixed to wooden plugs with CP brass screw of Kingston , Gem, Parko, Techno, Jal, ESS, Jaguar, Seiko make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PTMT concealed stop cock with flange of approved quality Prayag make and colour 15mm(fifteen millimetre) nominal bore including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing vitreous china division plate of Parry ware, Hundware, sanitary ware, Neycer, Cera make for urinal size 600x300mm(six hundred into three hundred millimetres) including carriage of material with in all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying cement concrete 1:4:8(one cement:foursand: eight graded stone aggregate 40mm(forty millimetre) nominal size )bedding for stoneware pipes of the necessary form work and curing complete for 150mm(one hundred fifty millimetre) dia pipe including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Constructing manhole with RCC top slab in 1:2:4 (one cement : two sand : four graded stone aggregate ) 20mm(twenty millimeter) nominal size foundation concrete 1:4:8 ( one cement : four sand :eight graded stone aggregate 40mm(forty millimeter) nominal size inside plastering 15mm (fifteen milimeter) thick with cement mortar 1:3 (one cement : three sand ) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement :two sand : four graded stone aggregate 20mm (twenty millimeter)nominal size finished smooth complete including curing and testing. Inside size 800mm x 800 mm and 500 mm (eight hundred millimeter x eight hundred millimeter and five hundred millimeter) deep including C I cover with frame (Light duty single seal pattern I) 455mm x 610 mm (four hundred fifty five milimeter into six hundred ten millimeter) internal dimensions total weight of cover and frame to be not less than 38 kg (thirty eight kilograms) weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) with 200mm (two hundred millimeter) thick brick walls of masonry using common burnt clay building bricks in cement mortar 1:3(one cement: three sand ) and curing complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Constructing manhole with RCC top slab in 1:2:4 (one cement : two sand : four graded stone aggregate ) 20mm(twenty millimeter) nominal size foundation concrete 1:4:8 ( one cement : four sand :eight graded stone aggregate 40mm(forty millimeter) nominal size inside plastering 15mm (fifteen milimeter) thick with cement mortar 1:3 (one cement : three sand ) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement :two sand : four graded stone aggregate 20mm (twenty millimeter)nominal size finished smooth complete including curing and testing Inside size 800mmx800mm and 1000mm ( eight hundred milimeter into eight hundred millimeter into one thousands millimetre) deep including CI cover with frame (light duty single seal pattern-I) 455mmx610mm(four hundred fifty five milimetre into six hundred ten millimeter) internal dimensions total weight of cover and frame to be not less than 38 kg ( thirty eight kilograms) weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) with 200mm (two hundred millimeter) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(one cement: three sand ) and curing complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing stone ware gully trap grade 'A' complete make of prefect, Hind or ISI marked S.W.pipe with CI grating brick masonry chamber in cement mortar 1:5(one cement:five sand) and water tight C.I. cover with frame of 30mm×300mm (three hundred into three hundred millimetre)size (inside) the weight of cover to be not less than 4.53kg(four poit fifty three kilogramme) and frame to be not less than 2.72kg(Two point seventy two kilogramme) square mouth trap 150mm x100mm (one hundred fifty into one hundred millimetre) size P or R type including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Supplying CI cover light duty rectangular 455x610mm(four hundred fifty five into six hundred ten millimetre) without frame for man holes complete weight 23kg(Twenty three kilogramme)(Single seat pattern-1)including carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

SS CONSTRUCTION COMPANY