GE(U)/PM/D-67/2019-20

Amount

M & L for painting on lift door and cabin steel surfaces (by proper covering of COP, handrails, mirrors display board etc) including preparation of old steel surface of door and cabin girth and applying two coat of synthetic enamel paint ( 1st grade quality) of any description over 10cm in width or girth not other wise describe by spray painting including making goods all disturbed surface of door/cabin splashes of paint to be cleaned all as specified and and directed Engineer-in-Charge. (Make of Paint :- ASIAN/ BERGER/ JOHNSON & NICHOLSON/ SHALIMAR).

M & L for painting of motor with gear assembly complete including ISMB (capacity 4 KW to 12 KW) installed in machine room of lift installation with two coats synthetic enamelled sky blue paint also where black paint is required and write the SM No on motor and panel with superior quality of synthetic enamelled white paint and preparing smooth surface suitable for painting complete all as specified and directed Engineer-in-Charge. (Make of paint :- ASIAN/ BERGER/ JOHNSON & NICHOLSON/ SHALIMAR)

Supply and fixing of hand rails of 40 mm dia stainless steel, medium grade pipe with curved ending including necessary fittings screwing for passenger/goods lifts including taking down old unserviceable hand rails complete all as specified and directed Engineer-in-Charge.

Supply and fixing of 4 mm thick mirror inside the car cabin including all accessories for passenger/goods lifts including taking down old unserviceable one complete all as specified and directed by Engineer-in-Charge. (Make:- MODIGUARD/ SAINT GOBAIN/ PRAYAG/ CERA).

M & L for aluminium chequered plate flooring 3mm thick five bar pattern fixing with accessories including necessary cutting bending, edeging, chamfering etc inside the car cabin of 8/13 passenger lifts etc complete all as specified and directed by Engineer-in-Charge. (Make :- JINDAL/ HINDALCO/ INDALCO.

Supply & fixing aluminium landing/ car door cills (Minimum size :- 1700mm x 50mm x 30mm thick) suitable for 8 passenger lifts. (Make of lifts :- Johnson / Thyssen krupp) including taking down old unserviceable landing/ car door cill complete all as specified and as directed. (As per OEM Recommendation).

Supply & fixing aluminium landing/ car door cills (Minimum size :- 1800mm x 50mm x 30mm thick) suitable for 13 passenger lifts. (Make of lifts :- Johnson / Thyssen krupp) including taking down old unserviceable landing/ car door cill complete all as specified and as directed. (As per OEM Recommendation).

Supply & fixing MS landing door frame 800mm opening, 2000 mm high and 3mm thick suitable for 8 passenger lifts (Make of lifts :- Johnson/ Thyssen Krupp) including taking down old unserviceable landing doors and complete all as specified & directed. (As per OEM Recommendation).

Supply & fixing MS landing door frame 900mm opening, 2000 mm high and 3mm thick suitable for 13 passenger lifts (Make of lifts :- Johnson/ Thyssen Krupp) including taking down old unserviceable landing doors and complete all as specified & directed. (As per OEM Recommendation).

Taking down of existing old unserviceable ARD (Automatic Rescue Device) any type and any capacity carefully by switching off electric supply from main control with accessories complete all as specified and directed by Engr-in-Charge.

Supply, fixing, testing and commissioning ARD 2.5KVA (Automatic Rescue Device) with panel and including necessary internal wiring work, suitable for Johnson make lifts including ARD batteries of capacity 12Volt, 17AH - 04 Nos as per site position for the 13 passengers lift complete all as specified and directed by Engr-in-Charge. (Make :- Johnson/ Thyssenkrupp /Otis/ Mitshibushi). (Note :- Work to be executed at Todapur, Block No P/6, P/7 & P/8).

Supply, fixing, testing and commissioning ARD 1.5KVA (Automatic Rescue Device) with panel and including necessary internal wiring work, suitable for Johnson make lifts including ARD batteries of capacity 12Volt, 17AH - 04 Nos as per site position for the 8 passengers lift complete all as specified and directed by Engr-in-Charge. (Make :- Johnson/ Thyssenkrupp /Otis/ Mitshibushi). (Note :- Work to be executed at Todapur, Block No P/6, P/7 & P/8).

Supply, installing testing and commissioning of defective Sheave C.I/Casting Traction Sheave 4 Grooves pully code OD520*4*10 mm bore size 90 mm ,key size 20*7 Bore length -150 mm ,width size 115 mm with main hoist rope of size 10 mm dia heavy duty (in 08 passenger lift) G+8 storey ( 9 stories) as per site requirement welding/brazing alongwith all connected accessories complete and testing on load including taking down old unserviceable one complete all as specified & as directed by Engr-in-Charge. (Make- OTIS/THYSSEN KRUPP/KONE/JOHNSON)

Supply, installing testing and commissioning of defective Sheave C.I/Casting Traction Sheave 4 Grooves pully code OD520*4*10 mm bore size 90 mm ,key size 20*7 Bore length -150 mm ,width size 115 mm with main hoist rope of size 13 mm dia heavy duty (in 13 passenger lift) G+8 storey ( 9 stories) as per site requirement welding/brazing alongwith all connected accessories complete and testing on load including taking down old unserviceable one complete all as specified & as directed by Engr-in-Charge. (Make- OTIS/THYSSEN KRUPP/KONE/JOHNSON)

Supply & fixing main hoist rope of size 6 strands x 19 of nominal dia 13mm (in 13 passenger lift ) G+8 storey (9 stories) heavy duty including taking down old unserviceable one complete all as specified and directed by Engr-in-charge. (Make : Usha Martin/ Mahadev Elevator/ Bharat wire rope Ltd/ Shree Steel wire & Ropes).

Supply & fixing main hoist rope of size 6 strands x 19 of nominal dia 10mm (in 8 passenger lift ) G+8 storey (9 stories) heavy duty including taking down old unserviceable one complete all as specified and directed by Engr-in-charge. (Make : Usha Martin/ Mahadev Elevator/ Bharat wire rope Ltd/ Shree Steel wire & Ropes).

Supply and Fixing of MS suspension rod, bull dog clamp and anchoring plate assembly including taking down old unserviceable one complete on load all as directed by Engr-in-Charge. (Make:- As per OEM recommendation).

Supply and Fixing MS Thimble Rod for 10/13 mm rope (car side & cwt side) including taking down old unserviceable one complete as directed by Engr-in-Charge. (Make:- As per OEM Recommendation).

Supply and Fixing Landing door header with complete accessories for lift of 8 passenger including taking down old unserviceable one complete as directed by Engr-in-Charge. (Make:- As per OEM recommendation).

Supply and Fixing car door header with complete accessories for lift of 8/13 passenger lifts including taking down old unserviceable one complete as directed by Engr-in-Charge. (Make:- As per OEM recommendation).

Supply and Fixing Travelling cable sheathed 12 core 0.75 Sqmm (as per sample) suitable for Johnson/OTIS/Thyssen Krupp make lift including taking down old unserviceable one with wiring all as specified and directed by Engr-in-Charge. (Make:- RR KABEL/ FINOLEX/ POLYCAB/ HAVELLS)

Supply and Fixing OSG rope of size 6 strands x 19 of nominal dia 6mm complete including taking down old unserviceable one all as specified and directed by Engr-in-Charge. (Make:- USHA MARTIN/ MAHADEV ELEVATOR/ BHARAT WIRE ROPE LTD/ SHREE STEEL WIRE & ROPE LTD.).

Supply & fixing OSG pit pully suitable for 08/13 passenger lift including taking down old unserviceable one complete all as specified and directed (Make:- as per OEM recommendation).

Supply & fixing vertical submersible water pump 1500 watt, 2.0HP with discharge of 20m3/H, 220-240 voltage with max head 14.5 M, copper wire wound motor, SS pump body with inlet and outlet connections including PVC flexible pipe 20mm dia-30RM and PVC insulated flexible 3 core copper conductor cable size 2.5Sqmm for 30RM length with complete accessories for water pump complete all as specified and directed (Make:- KIRLOSKAR/ CROMPTON GREAVES/ KSB/WASP).

M & L for machine cut kota stone of size 900mm x75mm and 800 mm x 75mm, 20-25mm thick with polished as in door strip over door cill, laid and jointed with chemical adhesive and edges shall be finished, moulded in full depth both side, finished and match on floor with white cement complete all a specified and directed by Engr-in-charge.

M & L for 18-20mm thick Granite (of any type) tiles or stone machine cut as in skirting /dado on lift facias in patches with existing granite etc. laid over cement screed bed 20mm thick in CM (1:3) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing on lift facias etc complete as directed from ground floor to eight floor including necessary safety precaution complete all a specified and directed by Engr-in-charge.

Note for item No 6 to 23:- (i) The entire work shall be done through OEM's i.e any one of M/s Kone India/Schindler India Pvt Ltd/OTIS Elevator Co. India Ltd/ Johnson Lifts Pvt Ltd/Thyssenkrupp Elevator India Pvt Ltd/LT Elevators. (ii) The contractor will have to submit MOU as given on page No. 91 & 92 from OEM's i.e any one of M/s Kone India/Schindler India Pvt Ltd/OTIS Elevator Co. India Ltd/ Johnson Lifts Pvt Ltd/Thyssenkrupp Elevator India Pvt Ltd/LT Elevators within Seven days from acceptance of tender, failing which the contract will be liable to be cancelled and work shall be executed as per policy in vogue.

M/S CH RAM CHANDER

M/s Dhapola Elevator and Engineering