Comprehensive development of Roads, Drains & Asphalting works at 1st Cross, 2nd Cross, 5th A Cross, Athmananda Colony, M.M. Layout 2nd, 3rd, 4th Cross & Surrounding area, Rankanagar 1st, 2nd, 3rd, 4th & 5th Road & surrounding area, Kaverinagar 4th Main road 2nd 3rd, 4th & 5th Cross Roads, Sakamma Haumanthappa Layout, Muninagappa Layout in ward no 69, Kavalbyrasandra

Comprehensive development of Roads, Drains & Asphalting works at 1st Cross, 2nd Cross, 5th A Cross, Athmananda Colony, M.M. Layout 2nd, 3rd, 4th Cross & Surrounding area, Rankanagar 1st, 2nd, 3rd, 4th & 5th Road & surrounding area, Kaverinagar 4th Main road 2nd 3rd, 4th & 5th Cross Roads, Sakamma Haumanthappa Layout, Muninagappa Layout in ward no 69, Kavalbyrasandra

Removing & Refixing stone slabs of drains and pointing in C.M (1:3) (Approved rate by Yelahanka Zone Dt: 18/06/2022)

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing Flush / Ruled/ Struck or weathered pointing Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cos...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per d...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (Item No 5.2 (Vol-I) Page No 9)

Providing and laying Pre Cast Slab using 20mm and down size aggregate stone using clean seived approved sand including cost and conveyance of all materials, all lead and lift, labour charges of machin...

Providing and laying Pre Cast Slab using 20mm and down size aggregate stone using clean seived approved sand including cost and conveyance of all materials, all lead and lift, labour charges of machin...

Removing and resetting of kerb stones (Approved rate by Yelahanka Zone Dt: 18/06/2022)

Providing and fixing pre cast solid cement concrete kerb stones made out of C.C. 1:2:4 with top and bottom width 114 and 165 mm respectively, 400mm high and 450mm in length finished with CM 1:3 plaste...

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces(Item No 8.10 (Vol-III) Page No 66)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanica...

Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.0 per cent by weig...

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface (Item No: 5.4 (Vol-3) Page No: 31)

Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 percent of mix and filler, t...

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC...