Repair of Engineering Section (Civil and Electrical) at 3rd Floor of Malda Zilla Parishad, Malda

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e)

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Dismantling Chunar stone flooring carefully including removing rubbish to anywhere within a lead of 75 m. and stacking the serviceable materials as directed.

15 mm thick cement plaster with cement morter 4:1 in out & inside wall in ground floor

Rendering the Surface of walls and ceiling with White Cement baseWATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door ofsolid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges andother fittings

b) Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I. S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws.

c) Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I. S. 204/74 fitted and fixed with cadmium plated screws.

g) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete.

Painting with best quality synthetic enamel paint of approved make and brand smoothening surface by sand papering etc. i.e., …….. Using of approved puttty etc. 2 coat on wooden surface with other than hi-gloss of quality in ground floor.

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).Bottom frame

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).Top and Side Frame

Labour charge for fabrication and installation of composite door,window, partitions made from annodized extruded alloy aluminium sections for the following units:- (A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture,adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers

Supplying bubble free float glass of approved make and brandconforming to IS: 2835-1987 vi) 6mm thick coloured / tinted / smoke glass

Labour Charge for shifting of Materials

ELECTRICAL WORKS:- Wiring in 1.1 KV grade sin gle core stranded 'FR' PVC insulated copper wire (App. Make) o following sizes in suitable sie PVC casing incl. Necessry PVC, clips, fitting etc. ( Page E11 item No.- 01, (i)3x1.5sqmm.12x15.0mtr.,

ii) 2x2.5sqmm + 1x1.5sq.mm. 12x15.0mtr

iii) 2x4.0sqmm+1.x2.5sqmm, 5x20.0mtr

Distribution Wiring in 1.1 KV grade 1.5 sqmm. Single core stranded ' FR' PVC insulated copper wire in suitable size PVC casing capping incl necessary , PVC, clips, fitting etc. To light fan tub e points with piano key type switch flused on PVC switch board on wall incl. necessary connection and mending good damages to building works. (page E11 item No.- 02) Average run 12.0 mtr.

Distribution Wiring ................ To 5 A 3 pin type plug socket with piano key type switch with earthing attachment. (page E-12 item No. -06 )

A) S/F 250 V 6A -10 A Way SPN MCBDB with SS enclose double door with 1 P / 42-43 protection with DP isolator as incomer and SPMCBS (C- Curve) as out going concealed in wall and mending good damages ............. Attachment. Havell''s make (Page D10 item no.13) (Page D6 item no.- 06)2+12 way

Fixing only single fluorescent tube light fitting complete with all accessories on wall or ceiling by screw etc.(Hanging) ( Page C2 item no. - 14a)

Supply of LED Tube Light 22watt of Havells Make

Fixing only Ceilling fan with copper wire (Page C3, item no-2a)

S/F Socket type Fan regulator step type ( app. Make ) on existing switch board

Supply and fixing down rod for fixing ceilling fan 2 feet 6 inch

Supply of Ceilling Fan 1400mm sweep of app Make such as orient

Earthing with 50mm dia GI pipe 3.64 mm. Thick x 3.04 mtr. Long and 1x 4 SWG G1. wire (4.0mtr. Long)13mm. Dia x80mm long G1. Bolts, doubles nuts doubles washers incl. S & F 15 mm . Dia G1. pipe protection (1.0mtr. Long) to be filled with bitumen partly under the G.L. and partly above the G1. Driven to an av depth of 3.65 mtr. Below the G1. as below( page G1 item No. 02a)

S/F 240V 20A Plug socket with controlling 20A Piano Key type Switch with earthing attachment( Page- E-6, Item No-22)

Supply and laying 2 core 10.00sqmm Aluminium armoured cable of app make

Supply and fixing A.C. Split type 2.0 ton of app make such as Voltas, Carrier, Blue Star etc. with Stater , 15Amp socket

Sub Total