Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.3 LAccepted-AOC | ₹4.3 L | L1 | Accepted-AOC AOC Accepted |
| 2 | L2₹4.3 LRejected-Finance | ₹4.3 L | L2 | Rejected-Finance Financially Rejected |
| 3 | L3₹4.4 LRejected-Finance | ₹4.4 L | L3 | Rejected-Finance Financially Rejected |
Tender Value
Refer Docs
EMD Value
₹8,731
Closing Date
6 Feb 2026, 9:00 amClosed
Assistant Engineer
Assistant Engineer, PWD, Raiganj Electrical Sub-DivisionKarnajoraRaiganj
e-NIQ-24
2026_WBPWD_992683_1
WBPWD/AE/RESD/e-NIQ-24 /2025-26(1st Call)
Open Tender
ELECTRICAL WORKS ORG
15 days
Raiganj
Please refer Tender documents.
5 documents required · 5 mandatory
₹8,731
Yes
18 Feb 2026
24 Jan 2026
9 Feb 2026
31 Jan 2026
6 Feb 2026
31 Jan 2026
Supply & Delivery of LED Tube illuminated sign board fabricated by 18''(L)x5'(H)x10"(W)ACP box supported with 50 x 50 x 6 mm M.S. Angle structure all around with 40mm x40mmx 1.62 mm Al. edge angle for front portion only.The back side of the cover will be fabricated with hinges and arrangement in such a way so that it can be opened for maintenance purpose, including mechanical locking arrangement .The 3 mm ACP facial (Blue colour) should be provided with laser cutting of 6 mm laser cut Acrylic letters out of which 5 mm rising and back portion of the ACP board should be pasted with 2mm thick Clear Acrylic Sheet of same size as ACP facial as per the direction of EIC.The sign board should be illuminated by suffcient qnty 18W LED Tube lamps (Type- MAS LED Tube lamp 18 W 2100 lm) with Tube fittings (Phillips make) to be fixed by hooking arrangement with iron stucture fabricated for fixing purpose. Distribution wiring for power supply to LED fittings to be done by PVC rigid conduit, necessary clamps, cable tie etc. Back side of the of the board should be covered with 20 SWG G.I. sheet to protect rain water. The matter to be displayed will be finalised by authority and to be given later.This fabricated display structure is to be fixed on the top of prefabricated iron structure as per direction of EIC.
Supply & Delivery of LED Tube illuminated sign board fabricated by14''(L)x4'(H)x10"(W)ACP box supported with 50 x 50 x 6 mm M.S. Angle structure all around with 40mm x40mmx 1.62 mm Al. edge angle for front portion only.The back side of the cover will be fabricated with hinges and arrangement in such a way so that it can be opened for maintenance purpose, including mechanical locking arrangement .The 3 mm ACP facial (Blue colour) should be provided with laser cutting of 6 mm laser cut Acrylic letters out of which 5 mm rising and back portion of the ACP board should be pasted with 2mm thick Clear Acrylic Sheet of same size as ACP facial as per the direction of EIC.The sign board should be illuminated by suffcient qnty 18W LED Tube lamps (Type- MAS LED Tube lamp 18 W 2100 lm) with Tube fittings (Phillips make) to be fixed by hooking arrangement with iron stucture fabricated for fixing purpose. Distribution wiring for power supply to LED fittings to be done by PVC rigid conduit, necessary clamps, cable tie etc. Back side of the of the board should be covered with 20 SWG G.I. sheet to protect rain water. The matter to be displayed will be finalised by authority and to be given later.This fabricated display structure is to be fixed on the top of prefabricated iron structure as per direction of EIC.
Supply & Installation of 4 mm thick polyvenile coated Aluminium Composite Panel board ( Aludecor / Alstone / Pratap Bond) of blue colour as the base for fixing raised letter duly fixed on the MS structure as per direction of EIC. The riser structre should be covered with ACP sheet incl. side portion on the board.NS ANALYSIS ATTACHED
M.S. works in brackets made from flats, angles, tees etc. to sizes specialy bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc. (length of straight not less than 230 mm) for extra support of Glow Sign by 50mm x 50mm x 5mm and the above supports should be painted with synthetic enamel paint over one coat of primer as per directiuon of EIC.
Scaffolding arrangement for working at height on entrance of the building by bamboo, ropes and wooden planks etc. and shifting of scaffolding materials after completion of work. Market Rate NS Analysis Attached
Supply and fixing of SMC Junction Box (280x170x130mm) with front side opening door and locking arrangement, with clamp. Junction box having 140x140x95mm dimension. Each have consist of the following materials:- EARTH Stud,MCB – 6-10A 1NO, (Make- Syntex/ Hensel approved by EIC)
Wiring by 3x 1.5 sqmm single core PVC insulated copper wire PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works from loop box to fitting as per GS. [Make- Finolex/Havells/Polycab]
Supply & Delivery of 1.1 kv grade 2Cx6 sqmm XLPE-armoured AL. cable, as directed by EIC. [Make - Gloster/Havells/RR Kabel]
Laying of above cable, in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed, as per GS.
Laying of above 2Cx6 sq.mm. XLPE/Ar. AL Cable on wall/surface incl. S&F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting, as per GS.PWD SOR-Vol-I 2017 PWD SOR-Vol-I 2017
SITC of road lighting luminaire 250V, 45 W (Maximum) ( IP 65 ) with peanut lens and high power LED and to ensure uniform distribution, higher spacing between poles and maintenance free system and system lumen output will be minimum 7200 lumen suitable for use with 230Volt 50Hz AC supply etc as required. as directed by EIC.[Make: Philips/ Havells/equivalent spec of K-Lite/Crompton-CRP-423-45-57-SL-GL-NSG/Surya] NS Analysis attached
Repairing of Existing Glow Sign Board at the top of the building of the office of EE PWD Roads by changing the inside tube light fittings with LED tube and refixing the same at site .
(ii)The Rates to be quoted by all the bidders should be Inclusive of all taxes and duties including GST and LWC.
Please Enable Macros to View BoQ information
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.51 MB
Tendernotice_2.pdf
PDF • 1.77 MB
BOQ_2427576.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid