PROVN OF SUBMERSIBLE PUMP, PRESSURE FILTER AND CONNECTED WORKS AT INS BAAZ CAMPBELL BAY UNDER GE(I) CAMPBELL BAY

Amount

S & F pumping sets, centrifugal, electrical driven, three phase, energy efficient Totally Enclosed Fan Cooled (TEFC) squirrel cage motors 12.5 HP self priming coupled pumpsets of size 100 x 100 mm (enclosure confirming to protection IP 55 as per IS:4691-1968) SS impeller, gland packing sealing, C-40 shaft, GM shaft sleeve, horizontal foot mounted induction motors, continuously rated suitable for operation on 415+/-10%, 50 Hz+/-5%, A.C. supply with class 'F' insulation for 50 Deg C ambient temperature and altitiude less than 1000M above MSL and confirming to IS 325:1996 & IS 12615:2011 all as specified and as directed. Note: (i) Rates for PCC foundation and C/I Channels are deemed to be inclusive (ii) Rates for NRV as recommended by OEM are deemed to be inclusive (iii) Wiring in conduit from pump starter to pumpset is deemed to be inclusive in quoted rate. Make: Kirloskar or techno-commercially equivalent in Crompton / KSB

S & F pumping sets, centrifugal, electrical driven, three phase, energy efficient Totally Enclosed Fan Cooled (TEFC) squirrel cage motors 7.5 HP self priming coupled pumpsets of size 80 x 80 mm (enclosure confirming to protection IP 55 as per IS:4691-1968) SS impeller, gland packing sealing, C-40 shaft, GM shaft sleeve, horizontal foot mounted Induction motors, continuously rated suitable for operation on 415+/-10%, 50 Hz+/-5%, A.C. supply with class 'F' insulation for 50 Deg C ambient temperature and altitiude less than 1000M above MSL and confirming to IS 325:1996 & IS 12615:2011 all as specified and as directed. Note:- (i) Rates for PCC foundation and C/I Channels are deemed to be inclusive (ii) Rates for NRV as recommended by OEM are deemed to be inclusive (iii) Wiring in conduit from pump starter to pumpset is deemed to be inclusive in quoted rate. Make: Kirloskar or techno-commercially equivalent in Crompton / KSB

S & F pumping sets, monoblock, electrical driven, three phase, energy efficient Totally Enclosed Fan Cooled (TEFC) squirrel cage motors (IE2) 5.0 HP pump sets of size 80 x 65mm sync speed-3000 RPM (enclosure confirming to protection IP 44 as per IS:4691-1968) horizontal foot mounted induction motors, continuously rated suitable for operation on 415+/-10%, 50 Hz+/-5%, A.C. supply with SS impeller, gland packing sealing, C-40 shaft & Class B insulation IP-44 and confirming to IS 325:1996 & IS 12615:2011 all as specified and as directed. Note: (i) Rates for PCC foundation and C/I Channels are deemed to be inclusive (ii) Rates for NRV as recommended by OEM are deemed to be inclusive (iii) Wiring in conduit from pump starter to pumpset is deemed to be inclusive in quoted rate. Make: Kirloskar or techno-commercially equivalent in Crompton / KSB

Supplying, laying or fixing, GI water tubing, 80mm dia bore medium grade, of size as shown below confirming to IS-1239 [Part-1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, etc laid in tenches / floors or fixed to walls / ceiling / roof etc including testing GI tubing with fittings / connections, in trenches / celiling /walls/roofs etc complete all as specified and as directed :- Make: Tata/ Jindal

Description all as per Item No 4 hereinbefore but 50mm dia bore complete all as specified and as directed.

Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil all as specified and directed.

Removing excavated materials (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed.

M & L for addition alteration in old GI pipe, screwing, cutting, threading, fixing of GI fittings like union, elbow, Tees, nipples, dummy, plugs etc of upto 80 mm bore including attending any minor work regarding pipe line complete all as specified and as directed by Engr-in-Charge. Note:- Rates for necessary GI fittings like union, tees, nipples, elbow etc is deemed to be inclusive in above quoted rates

Supply, testing, laying & commissioning of XLPE insulated, armoured (heavy duty) electric cable with aluminium stranded conductor, 1100 Volts grade (earthed), 3.5 Core 50 Sqmm laid in trenches / duct/ fixed to wall with suitable size clamps / passing through pipe /tunnel/under ground /surface up to the termination point (as directed by Engr-in-Charge) with necessary end terminations with suitable size cable lugs, cable glands, fixing of lugs with crimping with tool, nuts, bolts etc and including taking out unserviceable burnt out cable from its existing location complete all as specified and directed by Engr-in-Charge. Make : Polycab / Havells / Finolex

Supply, testing, laying & commissioning of XLPE insulated, armoured (heavy duty) electric cable with aluminium stranded conductor, 1100 Volts grade (earthed), 3.5 Core 25 Sqmm laid in trenches / duct / fixed to wall with suitable size clamps / passing through pipe /tunnel/ under ground /surface up to the termination point (as directed by Engr-in-Charge) with necessary end terminations with suitable size cable lugs, cable glands, fixing of lugs with crimping with tool, nuts, bolts etc and including taking out unserviceable burnt out cable from its existing location complete all as specified and directed by Engr-in-Charge. Make : Polycab /Havells / Finolex

S & F for HDPE double wall corrugated pipes conforming to IS-14930 Part-II with IP Protection of IP-67 having outer dia 63 mm and inner dia of 50 mm with necessary couplers, bends etc for protection of LT cable all as specified and as directed. Make : Gemini/ Telerex/ Prince

Design, fabrication, supply and errecting connecting and testing totally enclosed LT cubical panel board of suitable size, 3 Phase 4 wire system outdoor type 2 mm, double door front and back opening type separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable up to 50 Sqmm 3.5 Core in and out(Panel board shall have sufficient space to accommodate spare cables also), incoming and outgoing feeders duly marked on revited plates etc, CPRI approved factory made fabricated out of 3.15mm thick CRCA sheet duly treated through 7 times pre treatment process and painted with epoxy power coated matt finish of SIEMENS GREY structral RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on angle iron frame of 50mm x 50mm x 6mm thick duly painted and embeded in PCC (1:3:6) type C-1, including taking down old unserviceable one complete and consisting of the following provisions:-

S & F pumping sets, submersible, electrical driven, three phase, pump energy efficient Totally Enclosed Fan Cooled (TEFC) squirrel cage motors (IE2) 5 HP (02 Nos), 2840 RPM (enclosure confirming to protection IP55 as per IS:4691-1968) horizontal foot mounted induction motors, continuously rated suitable for operation on 415+/-10%, 50 Hz+/5%, A.C. supply with class 'F' insulation for 50 Deg C ambient temperature and altitiude less than 1000M above MSL, Head Range - 24-39 mtr discharge - 455-200 (LPM) and confirming to IS 325:1996 & IS 12615:2011 all as specified and as directed. Note: (i) Rates for PCC foundation are deemed to be inclusive (ii) Rates for NRV as recommended by OEM are deemed to be inclusive Make: Crompton / KSB / Kirloskar

Supply, install, testing and commissioning of pressure sand filter of suitable size for 10 KLD vertical type, capacity not less than 27000 LPH, pressure vessel made out of mild steel sheet confirming to IS : 2062 for shell and IS : 2062 grade for dished ends, painted externally with epoxy/ zinc chromate primer and internally with corrosion resistant epoxy paint with in built back washing arrangement complete with frontal piping and six numbers of suitable size butterfly valves (for inlet, outlet, backwash water), one number of air scour gate valve, one number air release valve, pressure gauge and sampling cock inlet and outlet piping's suitable under bed drain system and initial charge of filter media consisting of under bed, support bed and filter bed with graded gravel and filter sand inluding chlorine dosing pump with FRP tank 06 Ltrs/04 Kgs with CDS 100 complete all as specified and directed.

M & L PVC sheathed submersible copper cable of size 3 Core x 4 Sq mm complete all as specified & directed. Make : Havells / Gloster / Plaza

S & F of DOL pump starter suitable for upto 7.5 HP pumpset complete mounting on wall / Panel complete all as specified & directed Make : L&T /C&G /SIEMENS

S & F of star delta starter suitable for 12.5 HP pumpset complete mounting on wall / Panel complete all as specified & directed Make : L&T/ C&G/SIEMENS

M & L weather proof sheet metal enclosure double door made up of MS CRCA sheet 3.15 mm thick for housing of starter panel including fixing of submersible pump starter suitable for 5 HP pumpset and stand made up of MS angle iron frame of 50 x 50 mm size on ground with PCC foundation and locking arrangements complete all as specified and directed. Make of Starter : L&T /C&G /SIEMENS

Kakolil Trade Agencies

USR Transport

SSP ENGINEERING

M/S G S GREWAL

Govinda Swamy Construction