Re molding of Agriculture Extension Worker and Farmers hostel at Boileauganj, Department Of Agriculture Himachal Pradesh

Amount

SCHEDULE-A CIVIL WORKS

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within all leads as per direction of Engineer-in-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within all lead as per direction of Engineer-in-charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within all leads as per direction of Engineer-in-charge. For all thickness of tiles.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within all leads as per direction of Engineer-in-charge.

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within all leads as per direction of Engineer-in-charge.

Dismantling of CGI Sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within all leads.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering nuts, cutting rivets, welding etc. including dismembering and stacking within all leads as per direction of Engineer-in-charge.

Demolishing stone rubble masonry in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within all leads as per direction of Engineer-in-charge.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within all leads as per direction of Engineer - in- charge.

Demolishing of water supply and sanitary fittings in toilets complete by manually/ by mechanical means including stacking of servicable materials and disposal of unserviceable material within all leads as per direction of Engineer-in-charge.

Excavation in earth work in all kinds of soil and disposal of all excavated earth upto all leads and lifts as per direction of Engineer-in-charge. disposed earth to be levelled and neatly dressed.

Half brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in: Cement mortar 1:4 (1 cement : 4 coarse sand).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts graded stone aggregate 20 mm nominal size) up to all leads and lifts.

(i) 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)

Providing and laying up to floor five level reinforced cement concrete in stair, kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level in all leads and lifts.

Hard drawn steel wire (Tor steel)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work above plinth level :

1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)

20 mm cement plaster on fair side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)

Providing and fixing Laminated Wooden flooring of approved brand including locking arrangement in the doors and skirting complete as per the direction of Engineer-in-charge.

Providing and laying vitrified floor tiles in different (thickness to be specified by the manufacturer) withsizes water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size 600mmx600mm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all leads and lifts. Granite of any colour and shade directed by the Engineer-in-charge,

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm).

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10 mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 6 graded stone aggregate 20mm nominal size). 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand :

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Sal wood

Providing and fixing wooden plank ceiling with tongued and grooved jointing and wood screws (frame work and cover fillets to be measured and paid for separately). Kail wood

Providing and fixing wooden pannelling with tongued and grooved jointing and fixed over commercial ply to be measured and paid for separately. Kail wood

Providing and fixing 8mm thick commercial ply on wall facewith wooden pegs nails, screws etc complete

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of and bolted with special shaped washers etc. complete approved steel primer, including welding, Hot finished welded type tubes. Hot finished welded type tubes

P/F Polycarbonate transparent sheet roofing fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers

Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gm/m²

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m²

Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete : 1.60 mm thick with zinc coating not less than 350 gm/m²

P/F Facia with prepainted iron sheet with special design as per Engineer-in- Charge

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer ofapproved brand and manufacture on wall surface : Water thinnable cement primer

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Polishing on wood work with ready mixed wax polish of approved brand and manufacture :

SCHEDULE-B (INTERNAL ELECTRICAL FITTINGS)

Wiring for light point/ Fan point/ Exhaust fan point/ call bell point with 1.5 Sq.mm PVC insulated copper conductor cable in surface/ recessed PVC condute as required.

Group C

Wiring for circuit wiring with 2x1.5 Sq.mm PVC insulated copper conductor, single core cable in surface/ recessed PVC condute as required.

Wiring for submain wiring with 4x6 Sq. mm size of PVC insulated, copper conductor, single core cable in surface/ recessed PVC condute as required.

Wiring for light point/ power plug wiring with 2x4 Sq.mm PVC insulated copper conductor single core cable in surface/ recessed PVC condute along with 1 number 2.24 mmdia bare for loop earthing as required.

Wiring for light point/ power plug wiring with 4x4 Sq.mm PVC insulated copper conductor single core cable in surface/ recessed PVC condute along with 2 number 2.24 mm dia bare for loop earthing as required.

Supplying and fixing modular G I boxs of following sizes along with modular base and cover plate for modular switches in recess as required.

i) 2 Modules 78mmx78mmx50mm

i) 4 Modules 140mmx78mmx50mm

i) 6 Modules 205mmx78mmx50mm

i) 3 Modules 78mmx102mmx50mm

Supplying and fixing ceiling rose or the existing junction box/ wooden block including connections etc as required.

Supplying and fixing wall brackets of all sizes and shapes containing two GLS lamps per fittings with all accessories including connections etc. as requiared.

Supplying and fixing call bell/ buzzer and piano type bell push, suitable for DC/AC single phase, 230 volts, complete as required.

Supplying and fixing Bell indicator box single door 16 way

Supplying and fixing 5 amps to 32 amps rating, 240 bolts, "L" Series, miniature circuit brakers of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required (Category-A)

Supplying and fixing following rating double poles and four pole, 240/415 bolts, EL+MCB combination unit having sensitibity up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissionings etc.as required.

63 ampres double poles (Category-A)

Supplying and fixing following rating double poles and four pole, 240/415 bolts, EL+MCB combination unit having sensitibity up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissionings etc.as required.

63 ampres four poles (Category-A)

Supplying and fixing of follwowing way, single pole and neutral, sheet steel, MCB distribution board, 240 bolts on surface/ recess, complete with tinned copper busher, neutral link, earth bars, din bar, detachable gland plate, inter connection, including painting earthing etc. as required:

6 Ways Double door

12 ways Double door

16 ways Double door

Supplying and fixing modular blanking plate on the existing modular G I box as required.

Earthing with copper earth plates 600mm x600mmx3mm thick including accessories and providing masonary enclosure with cover paltes having locking arrangement and watering pipes etc. ( but without charcoal of coke and salt) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode as required.

Providing and laying earth connections from earth electrode with 4.00 mm dia, copper wire in 15mm dia GI pipe from earth electrode as required.

Providing, installation, testing and commissioning of prewired LED tube fitting, complete with ballast, starter and capacitors including LED tube rod, suitable to operate on 230 volts, single phase-AC supply directly on surface with copper wiring as required.

F/Tube fixure, 1x40 watt, box type, Category-A

Providing and erection of fancywall/ bathroom bracket containing GLS lamp holder (s) of all sizes and shape, complete with all accessories but excluding GLS lamp, including connections etc. as required:

Fancy wall bracket, single holder, category-B

Supplying and fixing Ding- Dong, electronic musical call bell and piano type bell push, suitable for DC/AC single phase, 230 volts complete as required;

Call bell Ding-Dong, category-A

Providing and installation of Exhaust fan with louvers/ shutters and frame, in the existing opening, including making the hole to suite the size of the fan, making good the damage, connections, testing commissioning etc.as required.

i) Light duty 225mm Sweep

ii) Heavy duty 300 mm sweep

Providing and fixing of stationary storage type electric water heater, complete with deat weight safety valve and non return valve by means of rag-bolts with nuts and washers, including embedding of rag-bolts in the wall, making good the damages, electrical connections safety valve connections testing and commissioning etc. as required.

Geyser 25 litres Capacity, Category-A

P/F sheet metal bus bar chamber suitable for 200 amp. 415 volts capacity with 4 Nos copper strip bus bar each of length 450 mm & cross sectional area (25.4mmx4.75mm) enclosure made from 1.6mm thick MS sheet having overall dimentions (680mmx450mmx150mm) nominal with all accessories including connections earthing the body etc as required.

Supplying and fixing copper strip bus bars suitable for 200 Amp. 415 volts capacity 4 Nos each of cross- sectional area (25.4mmx4.75mm) in the existing enclosure with all accessories including connections etc as required.

P/F following rating and braking capacity MCCB in the existing cubical pannel board including drilling holes in the cubical pannel, making connections etc.as required. 200 Amp-16 KA,

Providing and fixing voltmeter with indicator including all accessories and connections etc, complete.

Providing and fixing Ampare meter with indicator including all accessories and connections etc, complete.

SCHEDULE-C (WATER SUPPLY & SANITARY INSTALLATION)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

I) INTERNAL WORK- Concealed work, including cutting chases and making good the walls etc.

15 mm nominal outer dia Pipes

II) EXTERNAL WORK-Exposed on wall

25 mm nominal outer dia Pipes

75 mm nominal inner dia Pipes

100 mm nominal inner dia Pipes

Providing and fixing MS holder bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including

For 100 mm dia pipe

For 75 mm dia pipe

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore

Providing and fixing ball valve quality, High or low pressure, with (brass) of approved plastic floats complete: 20 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 - 15mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink with drain board: 510x1040 mm bowl depth 250

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing CP Brass Single lever wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing Towell rail complete with C.P. brass brackets fixed to wooden plugs with C.P. Brass. 750x20mm

Providing and fixing Towell ring complete with C.P. brass brackets fixed to wooden plugs with C.P. Brass. 750x20mm

Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with with C.P. brass screws.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe Flexible pipe

Providing and fixing 100 mm Stainless Steel grating with frame for floor trap

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing toilet paper holder : C.P. brass

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

vivek sharma