Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.6 LAccepted-Finance | L1 | Accepted-Finance OK | |
| 2 | L2₹41.4 L+₹3.8 L (10.2%)Accepted-Finance | L2 | Accepted-Finance OK | |
| 3 | L3₹42.7 L+₹5.1 L (13.7%)Accepted-Finance | L3 | Accepted-Finance OK | |
| 4 | L4₹43.2 L+₹5.6 L (15.0%)Accepted-Finance 231 SATYA VIHAR MADAN CONTRACTORS AND COMO VIJAY PARK DEHRADUN DEHRADUN UTTARAKHAND 248001 | DEHRADUN | UTTARAKHAND | 248001 | L4 | Accepted-Finance OK | |
| 5 | Rejected-Technical | - | Rejected-Technical NON FULFILMENT OF PQR |
Tender Value
₹36 L
EMD Value
₹36,000
Closing Date
9 Jun 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE ETC NOIDA
220 KV SUB-STATION SECTOR-20 NOIDA
Erection of160 MVA transformer and its Bay along with supply of material at 220 kV S/S Sector-129 Noida under ETD-I Noida
2023_UPTCL_805049_1
E-T-08/ETCN/2023-24
Open Tender
Electrical Works
Item Rate
45 days
NOIDA
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,770
EE ETD NOIDA
₹36,000
15 Jul 2023
26 May 2023
10 Jun 2023
26 May 2023
9 Jun 2023
26 May 2023
Amount
Work Portion
Dismantling of 132 Potential Transformer along with cutting of earthing strip and opening of cable and all other associated work to complete the work satisfactorily.
Dismantling of 120 KV LA along with cutting of earthing strip and opening of cable and all other associated work to complete the work satisfactorily.
Shifting of old & unused/ scrap material laying near proposed 160MVA T/F bay & Shifting of old/scrap material to open store as mentioned below- (a)Shifting of old and damaged 132,33 KV Current Transformer (10 Nos) (b)Shifting of old and damaged 132 KV Circuit Breaker with structure (01 Nos) (c)Shifting of old and damaged parts of 63MVA T/F with structure (01 lot) (d)Shifting of old and damaged 160 KN Disc Insulator (3000 Nos) (e)Shifting of old and damaged 132 KV Isolator channel base and Circuit Breaker structure piece (3 Nos) . (f)Shifting of T/F oil empty drum (600 Nos) & 33 KV damaged CB (4 Nos). (g) Shifting of tower parts scrap (100MT) etc. with help of Crane/Hydraand all other associated work to complete the work satisfactorily.
Destringing of 132 KV Jack Busbar of ACSR panther conductor having span length of 12 meter. The work shall be carried out after opening of jumpers and clamp and single bolted type tension fitting, dehoisting of disc insulators and shifting of material from site to store.
Opening of Jumpering, interconnection of equipment with ACSR panther conductor of 132 KV equipments with Transfer/Jack Bus Bar of ACSR panther conductor. The work includes cutting of conductor, opening , clamps & fittings with all other associated work to complete the work.
Sorting and stacking of main & auxilary structure.Erection of Main & Auxiliary structure lattic type GTM, ETM, BXM, CLI, CBI, XPM, YMM, BBL, BTI, APR, BCT, ALP etc. consisting of coloumn, beam, peak, mast etc. and auxilary structure for installation of CTs, PTs, LAs, etc. The job consist of shifting of all material from store to site of erection, erection of structure as per drawing with the help of GI nut & bolt, flat & spring washer, matching the hole, cutting & matching of member if required including cost of all men and T & P excluding GI structure Nut & bolt to complete the work. Erection of Main & Auxiliary structure lattice type BCT, ALP etc. upon foundation and its proper tightening.Making hole in part of GI main/auxilary structre / cutting of GI angle drilling of hole existing/ deffective structure /plate/Angle and grinding machine with all cost of men, T & P etc.
Erection of Following Structure
Erection of 245 KV SF-6 Circuit Breaker.
Erection of 245 KV Bus / Line Isolator ( Motorised )
Erection of 245 KV Tandam Isolator ( Motorised )
Erection of 245 KV Current Transformer.
Erection and mounting of 245/145 KV CT/PT Junction Box.
Erection of 245 KV Post Insulator for support.
Erection of 198 KV Lighting Arrestors.
Erection of 120 KV Lighting Arrestors.
Erection of 220 KV Control & Relay Panel of 160 MVA Transformer Panel as per technical specification.
Delta earthing of 198 KV LAs of 220/132 KV 160 MVA Transformer nuetral by 150 mm long conical shape its placing inside the ground in rectangular shape and connecting all 3/6 Nos electrodes with 75x10/50x6 mm MS flat laid on its edge and then this rectangle/tringle shape be connected to main earth mat at two place in opposite direction strictly as per drawing.
198 KV LA ( Rectangle shape by 06 electrodes)
120 KV LA ( Rectangle shape by 06 electrodes)
220/132 KV 160 MVA Transformer ( Tringular shape by 03 electrodes)
Earthing of equipments by cutting straightening, bending, laying 700 mm below ground and above ground of following size of MS flat for earthing of main and auxiliary structure, equipments structure. Transformer body and its neutral point including welding with main earthmat and with object to be earthed. Excavation of trenches, its back filling and all other associated work as required to complete the work.
Laying of MS Flat of size 75x10 mm
Laying of MS Flat of size 50x6 mm
Laying of MS Flat of size 25x6 mm
Painting of MS flat of different size after cleaning of rusted surface 1st coat of Red Oxide and 2 coat of Bus Green Paint to complete the work.
MS Flat of size 75x10 mm
MS Flat of size 50x6 mm
MS Flat of size 25x6 mm
Stringing of following Jack Bus of 220 KV with ACSR Moose conductor and different length of span as mentioned below. The work includes cutting & bending of conductor, fixing of single bolted type tension fitting. Hoisting of disc insulator and shifting of material from store to erection site and all other associated work to complete the work satisfactorily as per drawing and technical specification.
220 KV Jack Bus for 160 MVA CT to transfer bus isolator, Moose conductor 72 mtr jack bus
220 KV Breaker to Transfer bus Isolator Moose conductor 18mtr Jack bus
132 KV Breaker to transfer bus isolator for Moose conductor 12 mtr Jack bus, jack bus from 160 MVA ICT LV bushing to LV CT18 mtr jack bus
Jumpering, interconnection of equipment with ACSR moose conductor of 132 KV equipment with Transfer/jack bus bar of ACSR moose conductor. The work includes cutting of conductor, tightening of clamp & fitting with all other associated work to complete the work.
Laying of following size control cable in trench/cable trays from different control room equipments to 220/132 KV CB, CT,CVT and their juntion boxes. Transformer marshaling box, isolators box and other outdoor equipments installed in 220/132 KV switch yard as per cable schedule including carriage of cable drum from store and all other associated work.
2 core x 2.5 mm2
4 core x 2.5 mm2
6 core x 2.5 mm2
10 core x 2.5 mm2
Laying of power cable of 3.5 Core x 150/95 sq mm size 500mm below ground level including excavation of trench and laying of cable putting of brick and filling of Ganga sand over the cables then filling of earth with all cost of men, material and T & P for the completion of job
Termination of 3.5 Core x 150/95 sq mm power cable by providing suitable size aluminum dowell make lugs its crimping and connecting with equipment including cost of lugs and all other associated work to complete the job. (one job means 1 core of the cable)
Periphery and switchyard lighting
Providing and fixing of half round GI pipe OD-50mm for mounting the 160 Watt LED light upon gantry mounting of 2 No GI bracket up on gantry and fixing GI pipe complete with nut bolt and washer as per technical specification.
Providing and fixing of junction box on gantry structure with 1 No MS flat 40x5 mm of size 200x200x150 mm made of MS sheet of 16 gauge dully powder coated inside mounting 1 No 6 Amp MCB 1 No TB of 4 terminal & 1 No Kit Kat 16 Amp fixed upon mica sheet and back side mounting a flat 40x5 mm with 1 No 16mm dia hole and mounting PVC pipe from ground level to box as per technical specification.
Supply & fixing of new generation energy saving and environment friendly long life versatile pressure die cost aluminum out door high been flood light with high power 160 Watt LED as light source and exclusively designed polycarbonate cover along with electronic driver complete fitting suitable for 220 V input supply for ISI make CGL/Hevels/ Surya/ Philips/Bajaj of equivalent etc. including electrical connection also to be done by the contractor.
Erection of 160 MVA 220/132 KV Transformer.
Shifting of Main Tank of the new 160MVA 220/132KV Transformer to its Plinth from Place of Unloading up to 20 Meter Distance including Turning of the Tank, as Required at 220KV Sub Station sec 129 Noida.
Complete Erection of the new 160MVA 220/132KV Transformer including its Radiators, Conservator Tank, Turrets, Connecting Pipe Lines, HV / LV / Neutral Bushings, Cooling Fans, OLTC Drive Mechanism Box, Marshaling Box, OTI, WTI, Capillary Tubes etc.
Complete Evacuation of new 160MVA 220/132KV Transformer Main Tank and Filling of N2 of dew Point (-) 50 °C or Better in Vacuum up to Pressure of 0.25 Kg / Cm2 and the again Evacuating the Transformer Tank after Required Time Interval (approx. 12/24 Hrs.) using Centrifuging Machine. The Work shall include Connecting Pipes of Machine as Required and Measuring Due Point Values of Dry Air after every Cycle till the Required Value is Achieved. Dew Point Meter shall be arranged by the contractor. The above works involves minimum 3 Cycles of evacuation and 3 Cycles of N2 filling, however if results are not up to the mark 1 more cycle of evacuation and N2 filling will be done by the contractor.Performing the Vacuum stand test. The scope of work involves creating the vacuum inside the new 160MVA 220/132KV Transformer up to -760 mm of Hg for evacuation of moisture from core & winding and maintaining the pressure at least for 72 hours.
Centrifuging of T/F Oil in Oil Storage Tanks, un-interrupted till the desired BDV Value of the Oil is achieved and then Filling & Topping up of the Centrifuged T/F Oil in Transformer as per Standard Procedure to Maintain required Oil Level in the Transformer including Commissioning of Air Cell if required. Centrifuging & Circulation of T/F Oil in Transformer, un-interrupted till the desired BDV Value of the Oil & IR Values of Bushings are achieved including Hourly Recording all the Parameters such as Temp., Vacuum, and Insulation Resistance etc. Centrifuging Machine (Minimum 12KL capacity with 2 No. high vacuum pump of capacity 3000LPM and Root Pump of capacity 1500LPM), its Operator and all associated T&Ps shall be arranged by the Contractor at his own cost.
Erection of RTCC Panel of new 160MVA 220/132KV Transformer after Shifting of RTCC Panel from Stores / designated place to Control Room, then Making Earthing of the RTCC Panel.
Making Terminations / Connection of the Control Cables as per Cable Schedule of new equipments (CT, CB, Isolators etc.) alongwith 160MVA 220/132KV Transformer, RTCC Panel, Control & Relay Panel, Cooling Fans, Pumps, Marshalling Box, OLTC Driving Mechanism etc using existing Cables, as per Site Requirement alongwith Making necessary Holes in the Gland Plate/ Box, wherever required including providing and fixing of cable glands of appropriate sizes, Providing of Ferrules etc.
Safe Carriage,after loading of 50 KL Oil Storage Tank from designated Primary Sub Station within Approx. 60 Km distance to 220KV Sub Station sec-129 including its Shifting, Unloading & Placing at site at 220KV Sub Station sec-129 Noida.
Installation of high velocity automatic water spraying system for 160 MVA T/F including laying of fire direction water pipe line valves Quartzoid, HVWS nozzles along with all material complete as per details.
Supply & installation testing commissioning of quick opening flood, deluge value of HD of 150 NB as per Max working pressure 10 Kg/cm2, as per specification (HD/Mather Platt/equivalent) (In nos).
Supply & installation & Commissioning of gate valve (sluice Valve/Butterfly valve) as per IS specification (IS Code: 14846) of (Zoloto/Kartar/Sir make) (In nos.)
Supply & installation & testing commissioning 'Y' type strainer (Katar/Sir/Kalpana/Agro make) of dia max working pressure 7 kg/cm2 (in Nos.)
Supply & laying of different size of M.S pipe B class for fire water pipe line/support as per IS specification (IS Code-1239) Complete with elbow Tee Socket reducer etc. with anti-corrosive treatment with detail as below.
Supply & laying of different size of GI pipe B class for fire detection water pipe line as per specification (IS Code-1239) as per drawing enclosed complete with elbow Tee Socket reducer.
Supply & Installation of Flanges as per IS-1538 of different size as per drawing work include proper butt welding with pipe & proper packing and coupling with Nut & Bolt.
Supply, Installation & Commissioning of high velocity water spray nozzles flow capacity 3.5 Kg./cm2 Spray core angle 900.
Supply & Installation & Commissioning of Quartzite bulb detectors (QBD) operate at 900C sensing at rated temp for actuation of the element 10-12 sec.
Supply, Installation & Testing Commissioning of fixed differential switch (Danfoss/Indfoss make) type pressure switch range 1-10 Kg cm2
Pressure gauge as per IS Specification IS Code-3624 Accuracy 5%
Part-B Supply Portion:-
Bolted type single Tension fitting for ACSR Moose Conductor suitable for 1x16 No Disc insulator with hardware set as per techinical specification.
Bolted type single Suspension fitting for ACSR Moose Conductor Suitable for 1x16 No Disc insulator with hardware set as per techinical specification.
Bolted type single Tension fitting for ACSR Moose Conductor suitable for 1 x10 No Disc insulator with hardware set as per techinical specification.
Bolted type single Suspension fitting for ACSR Moose Conductor Suitable for 1x10 No Disc insulator with hardware set as per techinical specification.
4 Bolted Type PG clamp suitable for Moose to Moose Conductor Complete with HDG nut bolt & washer as per technical specification.
Bimetallic 220 KV Bus/ Line Isolator clamp made of aluminum alloy LM-6 for Moose conductor with HDG nuts & bolts and washer as per technical specification .
Bimetallic 220 KV Tandam Isolator clamp made of aluminum alloy LM-6 for moose conductor with HDG nuts & bolts and washer as per technical specification
Bimetallic 220 KV Breaker clamp made of aluminum alloy LM-6 for moose conductor with HDG nuts & bolts and washer as per technical specification
Bimetallic 220 KV CT clamp made of aluminum alloy LM-6 for moose conductor with HDG nut & bolts and washer as per Technical specification.
Bimetallic 220 KV LA clamp made of aluminum alloy LM-6 for moose conductor with HDG nut & bolts and washer as per Technical specification.
Bimetallic 220 KV Post Clamp clamp made of aluminum alloy LM-6 for moose conductor with HDG nut & bolts and washer as per Technical specification.
Bimetallic 132 KV CT clamp made of aluminum alloy LM-6 for moose/moose conductor with HDG nut & bolts and washer as per Technical specification.
Bimetallic 120 KV LA clamp made of aluminum alloy LM-6 for moose conductor with HDG nut & bolts and washer as per Technical specification.
Bemetallic terminal connector for 160 MVA T/F HV side bushing rod 30 mm dia made of aluminum alloy LM-6 suitable for ACSR moose conductor of matching with bushing rod complete with hot dip galvanized nut & bolts as per technical specification.
Bimetallic 132 KV CB clamp made of aluminum alloy LM-6 for moose conductor with HDG nut & bolts and washer as per Technical specification.
Bimetallic 132 KV Isolator clamp made of aluminum alloy LM-6 for moose conductor with HDG nut & bolts and washer as per Technical specification.
Bemetallic terminal connector for 160 MVA T/F LV side bushing rod 30 mm dia madere of aluminum alloy LM-6 suitable for ACSR moose conductor of matching with bushing rod complete with hot dip galvanized nut & bolts as per technical specification.
MS Flat 75x10 mm
MS Flat 50x6 mm
MS Flat 25x6 mm
MS Electrode of 3metre length of 40 mm dia
Supply of nut & bolts with 01 No spring and 01No plane washer of size.10x50mm
Supply of nut & bolts with 01 No spring and 01No plane washer of size.12x50mm
Perfect Power Transformer Associates
BARKATI ENTERPRISES
Madan contractors & Co.
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .