CA NO.CWE BLY/GE (W) /42 OF 2024- 2025SPECIAL REPAIR TO BLDG RA LINES OF HQ UB AREA, PROVN OF BOUNDARY WALL (APPROX LENGTH 75 M) INFRONT OF RA 4 LINES THE BADAUN ROAD AND PROVN OF HARDSTANDING AND PARKING SHED AT HQ UB AREA UNDER GE (WEST) BAREILLY

Amount

Dismantling of AC sheet corrugated/ semi corrugated sheets in wall cladding or in roof covering complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and directed.

Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

S&F steel work in tubular hollow/ solid rectangular/ square/ circular post, trusses, purlins, rail including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade inluding one coat of zinc chromate primer (including preparation of surface) before fabrication distance pieces, cleats etc GDE Fe 410-S complete all as specified and directed.

S&F rolled section as plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with any attachment, drilling holes etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and wahsers, the other end enlarged exc 15cm but not exceeding 30cm long of 20mm dia neck bolt complete all as specified and directed.

M&L 25mm thick cement concrete type B1 1:2:4 using 20mm graded stone aggregate in floor finishes even and fair to receive floor tiles complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L for Vitrified double charged coloured ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm and not exc 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed bed or bedding layer of cement motar 1:6 and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

All as per serial item 11 but as in vertical surfaces and 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of cement motar 1:6 for laying floor finishes and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of cement motar 1:6 for laying floor finishes and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed (plain /coloured) ceramic tiles wall 600x300x7mm thick on vertical faces of walls including 10mm thick rendeing in CM 1:4 set jointed in neat cement slurry and pointed in coloured cement to match including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade over and including 25mm thick sand cushioning including watering and consolidation including demolition/ dismantling existing surface complete all specified and directed.

M&L providing cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in benching, coping, bed blocks including necessary form work, weathering slightly rounded or chamfered angles and throating complete all as specified and directed.

S&F false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture,design and patterns having moisture content less than 2%, humidity resistanceof 99%, NRC0.50 to 0.75 as per IS8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm ,suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws including taking down old ceiling complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each including making good disturbed portions of wall with new or old bricks, lintel, cills, etc in CM 1:4 complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frames) area exc 1.5 Sqm each and not exc. 4.00 Sqm including making good disturbed portions of wall with new or old bricks, lintel, cills, etc in CM 1:4 complete all as specified and directed.

Taking down shutters of any description exc 2 sq. m each each complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. complete as specified by the manufacturer and as per directions of GE and complete all as specified and directed.

S&F 30 mm thick Fiber glass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of GE and complete all as specified and directed.

S&F 125 x 60mm x 1.25 mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1, necessary fixing lugs, SS hinges, lock strike plate, 02 x MS bar/flat at bottom of the frame etc, complete including wooden texture finished paint on the frame surface complete all as specified and directed.

S&F 105 x 60mm x 1.25mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1 necessary fixing lugs, SS hinges,lock strike plate, 02 x MS bar/flat at bottom of the frameetc, including wooden texture finished paint on the frame surfac ecomplete all as specified and directed.

S&F 35 mm thick Factory made flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specified and directed.

M&L for 30 mm thick plain framed glazed and skeleton shutter open rebated & prepared to receive glass, gauge etc, with sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass including campsule mesh tightly fixed with the glazed and skelton door shutter etc, of 2nd class hard wood, members of shutters as specified in SSR Part - I Section 8 clause 8.24 (a) fitted to chowkats complete all as specified and directed.

S&F fancy type 200 mm long stainless steel handles etc complete all as specified and directed.

S&F 100mm long stainless steel butt hinges complete complete all as specified and directed.

S&F 150mm long aluminum anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 200mm long aluminum anodised, barrel tower bolts of extruded section and fixedcomplete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F galvanised stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specifed and directed.

S&F 300 mm size, MS ordinary rat tail rod pattern springs including roller and roller plate complete including fixed to wooden and steel chowkats complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of newly or previously untreated surface of wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of newly or previously untreated steel surface exc 10 cm width or girth with two coats of synethic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-1 (using 20 mm graded aggregate) as in bed blocks for hold fast and similar work etc complete all as specified and directed.

M&L for chicken wiremesh fixed to wall with necessary screws of approripate size complete all as specified and directed.

M&L for 15 mm thick rendering on brick surfaces or concrete surfaces (on external surface) in cement mortar 1:4 finished even and smooth without using extra cement and mixed WPC @ 3% of cement weight including taking down olde cement plaster including necessary scaffolding complete all as specified and directed. Note :- WPC shall be measured and paid separately

M&L for 15mm thick rendering on brick surfaces or concrete surfaces (on external surface) in cement mortar 1:4 finished even and smooth without using extra cement and mixed WPC @ 3% of cement weight and necessary scaffolding complete all as specified and directed. Note :- WPC shall be measured and paid separately

M&L for 12mm thick rendering on brick surfaces or concrete surfaces (on internal surface) in cement mortar 1:6 finished even and smooth without using extra cement including taking down old cement plaster and necessary scaffolding complete all as specified and directed.

M&L 12mm thick rendering on brick surfaces or concrete surfaces (on internal surface) in cement mortar 1:6 finished even and smooth without using extra cement including necessary scaffolding complete all as specified and directed.

M&L for rendering 5mm thick on ceiling or concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement including taking down old cement plaster including necessary scaffolding complete all as specified and directed.

M&L for rendering 5mm thick on ceiling or concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement and necessary scaffolding complete all as specified and directed.

M&L for preparation ofnewly plastered or untreated surfaces and applying three coats white wash on ceiling and necessary scaffolding complete all as specified and directed.

M&L for applying 1 mm thick layer of wall care putty on external and internal wall surfaces including rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as specified and directed.

M&L for complete removal including rubbing down with sand paper to have even and smooth surfaces old decorated surfaces and applying two coats of white wash on ceilings complete all as specified and directed.

M&L for complete removal of existing treatment on wall by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean ,free from dust ,loose paint etc by skilled labour and applying two coat oil bound distemper on wall with airless electric sprayers over a coat of primer applied using airless electric sprayer over one coat of plaster of paris of 1mm thickness complete all as specified and directed. Note:-Application to be done through authorised applicator of manufacturer.

M&L for preparation of newly plastered wall surfaces and applying two coats oil bound distemper with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coat of cement wall care putty of 1mm thickness complete all as specified and directed. Note-Application to be done through authorised applicator of manufacturer

M&L for preparation by washing rubbing down and stoping of distempered of old decorated or undecorated wall, roof surface and applying one coat of cement based paint complete all as specified and directed.

M&L applying two coat of white putty on new surface and applying one coat of exterior water based primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by jpaint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper, on the surface to achieve excllent application using limited manpower complete all as specified and directed.

M&L for complete removal of existing treatment, preparation of old decorated plastered or unplastered surfaces of walls / roof projections including facia,cornices etc. and applying two coat of white putty and applying one coat of primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by paint manufacturer and accessories for applying Primer, should be able to spray in hard to reach areas and penetration of Primer, on the surface to achieve excllent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying exterior weather proof paint, should be able to spray in hard to reach areas and penetration of exterior weather proof paint on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces two coats of cement base paint on new plastered wall surfaces over a coat of primer complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L brick work with fly ash old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L brick work with fly ash old size bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IIIrd floor) etc making good, cutting out exc 10cm and not exc 20cm girth in RCC chajjas in brick walls complete all as specified and directed.

Demolition of reinforced cement concrete, (other than ground floors), shelves, chajjas, slabs and stair case, ceiling and similar work carefully and matching to adjoining disturbed surfaces complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for form work to edges of concrete rough finished surface flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and directed.

M&L for form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc finished rough surfaces of concrete complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular finishes rough surfaces of concrete.etc finished rough surfaces of concrete complete all as specified and directed.

M&L formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in slab, shelves and stair case etc. complete all as specified and directed.

M&L for RCC type B 1, 1:2:4 20mm graded stone aggregate as in beams, cantilevers, lintels, over 1.5 m span complete all as specified and directed.

M&L for RCC type B 1, 1:2:4 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in chajjas and like complete all as specified and directed.

Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposing the reinforcement without disturbing the reinforcement free from rust by sand blasting/ using chemical, apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx 50 mm (10 mm gauge welded mesh ) & tack , securing with clips / linding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @ 200 ml every 50 kg of cement and applying two coat of ezee at interval of 8 hours cure for the surfaces complete all as specified and directed.

Demolition of cement concrete (un-reinforced), in any position and paving n.exc. 15 cm thickness (below or above ground level) including tile/ terrazzo floor complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C2 (using 20mm graded stone aggregate) as in plinth protection 75 mm thick finished even and smooth without using extra cement including forming 10 mm wide joints at not exceeding 3 m distance between adjoining slabs shall not exceed 10 mm in thickness and shall be filled with bitumen mastic i.e. bitumen and sand in proportion 1:2 complete all as specified and directed.

Supply only liquid waterproofing compound complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (40 mm graded stone aggregate) as in in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 Type B0 using 12.5 mm graded stone aggregate as in levelling course, haunching, coping and similar works of over RCC roof surface including rounded or chamferred on edges etc complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of concrete surfaces on roof and parapit etc in CM1:4 with water proofing compound concrete surface complete all as specified and directed. (Note:- WPC shall be measured and paid separatly)

M&L for 20mm thick Granite (Z- black colour only) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. stone including grinding and polishing and 15mm screed bed or bedding layer in cement mortar 1:6 including dismantling of tiles, hearting etc complete all as specified and directed.

M&L for 20mm thick Granite (Z- black colour only) machine cut and machine, polished,and moulding, window cills, riser of steps and urinal partition wash basin platforms and flooring, skirting/ dados like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cement mortar 1:4 finished even and rough and dismantling of wall tile including cement mortar bedding complete all as specified and directed.

M&L for 20-25 mm thick machine cut pre polished kota stone slab flooring laid under stairs soffits area and jointed with grey cement slurry fixed with pigment to match to shade of the slab including rubbing and mirror polishing over and or 20 mm thick bedding layer of cement mortar 1:6 for laying floor finishes even and rough with and including dismantling floor, hearth or wall kota stone slab including cement mortar bedding including removing the rubbish off the premises complete all as specified and directed.

M&L for 20-25mm thick machine cut pre polished kota stone slab in riser of steps skirting, dado and pillar, landing in single piece with round nosing with three numbers of serration using as front door steps, laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in CM 1:4 finished even and rough as screed dismantling of wall tile including cement mortar bedding complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device with flush pipe to pedestal pan including all joints complete all as specified and directed.

S&F in repair vitreous china squatting pan of orissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed.

S&F in repair 15 mm bore dia of pipe fancy type chromium plated brass angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15 mm bore dia of pipe bib tap fancy type chromium plated with flange quarter turn, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 450mm long PVC connection 15mm bore with PTMT nuts complete all as specified and directed.

S&F 15mm bore dia GI water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors including taking down of existing pipe line of any description complete all as specified and directed.

S&F 20mm bore dia GI water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors including taking down of existing pipe line of any description complete all as specified and directed.

S&F 0.8 mm thick stainless steel kitchen sink size 590 x 460 x 230mm undermount, single bowl (bowl size 540 x410 x 230 mm), including waste pipe & SS coupling, washers etc complete all as specified and directed.

S&F in repair 75 mm x 32 mm dia chromium plated waste fitting special size suitable for stainless steel sinks including PVC flexible waste pipe of approved quality complete all as specified and directed.

S&F in repair 100mm x 100mm stainless steel grating fixed complete all as specified and directed.

S&F in repair fancy type stainless steel towel rail 20mm dia, D type, size 600mm long including a pair of brass bracket complete all as specified and directed

S&F stainless steel plate rack not less than 5 Kg of size 31"X36"X10" complete all as specified and directed.

S&F in repair vitreous chinaware coloured wash hand basin with padestal of size 55 x 40 x 82 cm complete including CP waste coupling 32mm dia, waste pipe, complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.

S&F in repair fancy type 125mm size square brass CP shower rose with or without swivel joints complete all as specified and directed.

S&F in repair brass chromium plated wall mixer 2 in 1, 15mm for mixing hot & cold water including provision of over head shower, screwed down three joints to steel pipes or unions and plugging and screwed to walls incl necessary fitting complete all as specified and directed.

S&F in repair fancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes incl necessary fitting complete all as specified and directed.

S&F in repair fancy type chromium plated soap dish of 160x160x90 mm complete all as specified and directed.

S&F in repair of PVC corner set of three of size (12"x12", 9"x9" and 6"x6") with railling and complete all as specified and directed.

S&F fancy type 15 mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB complete all as specified and directed.

S&F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls complete all as specified and directed.

S&F in repair stainless steel curtain rod 25 mm dia of approved quality with two number decorative design as approved brackets fixed in brick/ concrete wall and same finished knobs on each end of curtain rod complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polythylene triple layered water storage tanks white in colour (cylindrical vertical with closed top) hoisted and fixed in position including dismanlting of existing tank/ demolition of RCC water storage tank of capacity and any description all as specified in SSR Part I complete all as specified and directed.

S&F 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 142 gms) complete all as specified and directed.

S&F in repair of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F mild steel OHT cage, bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-290 Gde - E-165 complete all as specified and directed.

Taking up or down AC/ PVC rain water pipe, soil/ waste/ vent pipe of any size with fittings etc complete all as specified and directed.

S&F PVC (SWR) 110 mm dia soil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or drain complete all as specified and directed.

S&F in replacement PVC (SWR) 110 mm bore bends complete all as specified and directed.

S&F in repair PVC (SWR) multi floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain including jointing to waste pipe fixed in cement concrete (1:2:4), type B-1 complete all as specified and directed.

S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.

S&F in repair PVC 110mm bore Y-Junction piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door complete all as specified and directed.

S&F in replacement PVC 110mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branchescomplete all as specified and directed.

S&F in replacement PVC 25 mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches complete all as specified and directed..

S&F 110mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door complete all as specified and directed.

S&F in replacement 75mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door complete all as specified and directed.

S&F in repair 75 mm bore PVC cowl complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows, ventilators and kitchen cupboards frame size 100x44mm and 2mm thick with one or more rebates including joining cleat for fixing etc and add for powder coating (minimum thickness of powder coating 50 micron) complete all as specified and directed. Note:- Weight of section should not be less than 1.12 kg per RM.

S&F powder coated aluminium door, window, partiton and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) each shutter complete all as specified and directed. Note : Cost of rubber beading and required accessories shall be included in the quoted rates of item and will not be paid extra.

M&L for 6mm thick bakelite sheet prelaminated both side with decorative choice lamination work complete all as specified and directed.

S&F steel grill/ guard bars for window/ ventilators or forged into spikes, framed balusters, walkway railing and similar work including welding, FE-290 grade E-165 complete all as specfied and directed.

S&F sheet glass 5.5mm thick ordinary quality and glazing with oil putty/ necessary beading in square n exc 0.5 Sqm each pane complete all as specified and directed.

S&F sheet glass 5.5mm thick ordinary quality and glazing with oil putty/ necessary beading in square exc 0.5 Sqm each pane complete all as specified and directed.

S&F powder coated aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips, frame made with aluminium section as appended below- (i) Window frame :68.4x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified

S&F aluminium extruded section body Door closer hydralically regulated,designation No. 3,universal type, suitablebfor door shutters of 851 to 1000 mm in widthand of weight between 61 to 80 kg and fixed complete all as spd & directed

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as spd & directed

S&F for stainless steel glossy finish hat peg set of five tier with necessary fitting complete all as specified and directed.

S&F stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for up 100mm dia pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F computerised reflective letter/ bldg number on ACP sheet (size 45mm x 45mm) and fixing with 04 nos of screw, rawal plug etc on wall in front of building complete all as specified and directed.

M&L for 150 mm dia cutting into existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified and directed.

M&L for 400x400 mm (10 to 12 mm thick) out door vetrified designer anti skid coloured tiles including designer borders tiles (Square/ rectangular) in floors/ path/ hard standing etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in soft/ loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in bed of drain pipe including packing under and hunching against the sides of pipe after they are laid and tested for 150mm bore pipe complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for 150 mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and joints including dismantling of existing pipe complete complete all as specified and directed.

Surface excavation in soft/ loose soil not exc 30 cm deep and average 15cm deep and getting out complete all as specified and directed.

M&L for 15 mm thick rendering on brick surfaces or concrete surfaces (on external surface) in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for RCC M-25 design Mix concrete for foundation, including raft footings, foundation beams, plinth beams,bases for column etc.basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 design mix concrete for Beams, cantilevers, lintels, columns pillars, piers, posts, struts, chullah hoods, stair case, arches, domes, vaults, shell roofs, arch ribs, folded plates, slabs, balconies, canopies, deck slabs etc. or in similar articles upto 5th floor level complete all as specified and directed.

S&F rolled mild steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths indicated posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, wind ties, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for framed work as in doors or ornamental and intricate design gates of angle or other section with gusset plates, rails, braces, including pintal etc. complete, drilled for fixing of steel sheeting or othercovering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe-410- W (Gde- E-250) quality- B complete all as specified and directed.

S&F razor wire 2.24mm dia with 20mm wide and 0.50mm thick razor strip fixed with clamps in rows and angle iron bracket/ frame over boundary wall etc complete all as specified and directed. (Note : Each Razor wire and angle iron frame/ bracket shall be measured and paid separetely.)

S&F diamond shape hight strength steel punched tape concertina coil 600mm dia (in specific stretched posion) hot dip galvanised coated with CLR anti corrosive paint by making diamond shape with the help of dove tail clips (18 SWG) fixed over razor with the help of hog rings (14 SWG) in angle iron bracket/frame over boundry wall etc complete all as specificed and directed. (Note : Razor wire and angle iron frame/bracket shall be measured and paid separetely.)

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm

Removing excavated material exc. 250m but n exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for hard core of broken stone or boulders of gauge not exc 63mm deposited, spread & levelled in layers not exc 15cm thick, including watering and ramming to a true surface complete all as specified and directed.

M&L for 15 mm thick rendering on fair brick surfaces or concrete surfaces in cement mortar 1:6 finished even and fair complete all as specified and directed.

M&L for 15 mm thick rendering on other than fair faces of brick surfaces or concrete surfaces in cement mortar 1:6 finished even and fair complete all as specified and directed.

M&L Cement concrete 1:3:6 Type C1 ( using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating,directed.

S&F mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde E- 250) quality A complete all as specified and directed.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specfied and directed.

M&L for machine pressed precast concrete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade over and including 25mm thick sand cushioning complete all specified and directed.

Taking down carefully unserviceable copper/ aluminium point wiring (Light, fan, socket or power) complete including unserviceable fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, brackets, except ceiling fittings, bulk head fittings, tube light fittings etc. and making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down old sub main copper/ aluminium cable off various sizes from existing conduit/ batten complete all as specified and directed.

Taking down old MCB DBs/ main switches of any size and capacity complete all as specified and directed

M&L for wiring with and including multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with new sunken concealed terminal boxes complete all as specified and directed for the following :- (a) One light/ fan point controlled by one switch

All as per Item No 167 but here in before (b) One 3 pin, 5 Amps, socket outlet on the same board, controlled by another switch.

All as per Item No 167 but here in before (c) One multi pin socket outlet, 5 Amps, on Independent board.

M&L for wiring with and including multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with new sunken concealed terminal boxes complete all as specified and directed.

S&F switch piano, flush type, single pole, one way 15 Amps complete all as specified and directed

S&F socket outlet 15 Amps flush type complete all as specified and directed

S&F switch piano, flush type, single pole, one way, 5 Amps complete all as specified and directed

S&F socket outlet 5 Amps flush type complete all as specified and directed

S&F ceiling fan regulators, electronic steped type, flush type AC, 230 Volts complete all as specified and directed.

S&F ceiling rose, 3 terminal, any shade, of PVC/ polycarbonate, isolated body complete all as specified and directed

S&F sheet metal distribution board, SPN, 8 way 240 Volt, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar and neutral links complete including taking down old unsv complete all as specified and directed

S&F in repair miniature circuit breakers, SP, 6 to 32 Amps, type curve ‘B’ , 10 KA, 240 volts complete all as specified and directed.

S&F in repair miniature circuit breakers, SPN, 32 Amps, type curve‘C’ 10KA, 240 Volts complete all as specified and directed.

S&F in repairs LED light fitting, high lumens batten type, housed in extruded from powder coated aluminium, 20 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion complete all as specified and directed

M&L for earthing and testing complete with galvanized iron earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 M below normal ground level with top edge plate at adepth not less than 1.5M below normal ground level connected to and including earth lead GI wire 4 mm dia, by means of bolts and nuts,check nuts and washers etc.,made of GI and connected to panel/distribution board and earthing test point and earth dolly all as shown in elect plate No.3 of SSR Part-1 including necessary earth work,excavation PCC chamber cover with handle (PCC 1:2:4) incl 20mm dia GI pipe of medium grade for watering and 15mm dia GI pipe of light grade for protection of earthing lead ,wire mesh, funnel, charcoal dust,common salt,copper lugs etc complete all as specified and directed

Taking down ceiling fan of any size and place in safe custody by the contractor complete all as specified and directed

S&F submain wiring with 2 single core, 4 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper multi stranded conductor drawn in and including PVC conduits of 20mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper conductor multi stranded,4Sqmm size as continuous earth wire drawn through and connected to main switch/ DB and testing on completion complete all as specified and directed.

S&F submain wiring with 2 single core, 6 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper multi stranded conductor drawn in and including PVC conduits of 20mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper conductor multi stranded, 6 Sqmm size as continuous earth wire drawn through and connected to main switch/ DB and testing on completion complete all as specified and directed.

S&F ceiling Light 2'X2' 36/ 40 Watt complete all as psecified and directed.

S&F in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection completeand including 32 mm light grade GI tube bracket including nut, bolt, clambs etc for fixing in wall, length of bracket not less than 1.2 mtr complete all as specified and directed.

S&F VTPN with incoming 100 Amp MCCB and outgoing single phase MCB SP -4Nos complete all as specified and directed.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Note :-Old Fans of any Capacity deposited to MES store yard .for BER board

Taking down carefully service connections of any description from pole, wall or service brackets etc including making good disturbed surface to match with the existing surface complete all as specified and directed.

Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240 sq mm, 3.5 core complete all as specified and directed.

Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm, 3.5 core complete all as specified and directed.

M&L for sand cushioning to underground cable in trenches below and around underground cable including spreading and leveling punning complete all as specified and directed.

M&L Modular bricks common burnt clay building bricks, sub-class ‘B’ designation-75 for LT UG cable protection complete all as specified and directed.

S&F GI tubes light grade of dia 80 mm with all fitting and fixed complete for protection of LT UG Cables laid to walls or in floors or along with poles etc complete all as specified and directed.

S&F bus bar chember made MS Sheet of overall size not less than 500mm width x 300mm Height x 400mm Depth, M.S. Channel Base Frame mounted (to be mounted on the 3 side covered brick. pedestal of height 900mm above ground level) , suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bars of rating 1000 Amps complete all as specified and directed.

M/S Rajeev Sharma and Co. (BID ID -3153828)

Builders Harpal (BID ID -3158302)

Shikhar ji Enterprises (BID ID -3158539)

TEAM ACC INFRABUILD PRIVATE LIMITED (BID ID -3158713)