Providing Stainless steel queue line barriers for queueline and Granite seating arrangement at Queue complex of Arulmigu Bhavani Amman Temple, Periyapalayam, Uthukottai Taluk, Thiruvallur District.

Amount

Brick work in following Cement Mortar 1:5 using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2- 3/4" for including the cost of all materials and all charges,curing, etc., complete complying with standard specifiction. (Superstructure)

Plastering with cement mortar 1:5 12mm thick including the cost of all materials and all labour charges,curing, Smooth finishing etc. Complete as per standard specifications.

Providing and laying position,Standardised concrete mi M-20 Grade in accordance with IS :456-2000,using 20mm and down graded hard brocken granite stone jelly for all Rcc items of works with minimum cement content of 3250 kg/cum and maximum water cement ratio of 0.55,inculding admiture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retart setting of concrete, improve workablity without imparing strengh and durability with about (5 cum)7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m)5156 kg of 10-12 mm machine crushed stone jelly and with about(4.79 cu.m)7670 kg of M-sand ,but eculding cost of reinforcement grill and fabricating charges, centering and shuttering and also inculding laying, vibrating with mechanical vibrtors, finishing, curing, etc, complete complying with standred specification and as directed by the departmentel officers.the coarse and fine aggregates to be used shoul comply with the requirments of IS standreds.(No separate payment will be made by the Department for the excess usage of materials.)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) (Upto Basement)

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supplying and fixing of super fine polished Granite slab of 1200x600x18/20mm thick of approved quality laid in CM 1;3 (one of cement and three of sand) 12 mm thick for side walls including cutting the granite slab to the required size where ever necessary , nosing the edges to the required shape including cost of granite slab, polishing laying finishing etc all complete in all respects and as directed by the departmental offficers. (Measurement will be taken including bearing also The quality and color of Granite slab shall be got approved by the Competant Authority before fixing.)

Single nosing in granite slab at stairs, sill slabs, vanity counter, etc. (TNPWD SR - M0245)

Fabricating and fixing of Stainless Steel barriers for queue lines using 50mm dia 304L Grade Stainless Steel pipe of 2.00mm thick at required locations as vertical at max. spacing of 1200mm c/c. (as per site conditions) to a height of max. of 2000mm from finished floor level welded to 50mm dia Stainless Steel pipe post of 2.00mm thick as horizontal brace at the top & bottom (as per drawing). 2 Nos . of 40mm dia intermediate horizontal stainless steel pipe of 2.00mm thick , and 25mm dia intermediate vertical stainless steel pipe of 2.00mm thick to a max. 200mm c/c spacing in between the vertical frame supports. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance , electrical charges , Transport, loading & unloading etc. complete.

Supplying and fixing of Temple Logo Design on top of the Stainless Steel queue line barrier at regular intervals. The rate is inclusive for cutting, bending, welding, grinding polishing, conveyance, electrical charges, transport, loading & unloading etc. complete with standard specification.( Stainless Steel Logo size - 3'6" x 1'3" - 6mm thick , 32 x 32 x 2 mm SS Tube frame and Logo inner support)

Sub Total

ARAWIND CONSTRUCTIONS (BID ID -1483700)