Work-40 Repair and painting of the boundary wall of Tanki Wala Park Water Tank Park, located behind the Radisson Hotel Ward 21, Vasundhara Zone.

Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200feet).

Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into 2 the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplusearth as directed by the Engineer-in-charge upto a distance of 30 M.

S/L P:C:C (1:6:12) with 40 mm gauge brick ballast, fine sand of 1.25 f.m and cement in foundation and under floor including all materials, labour, tools, & plant etc all completed as per the direction of engineer - in -charge. { AS PER PWD SOR 2022 PAGE NO 18 SI NO 5.01 ITEM NO

First class Brick Work in (1:4) cement & four coarse sand 2.20 F.M. morter in foundation and plinth and T&P etc all completed as per the direction of engineer-in-charge. (AS PER PWD SOR 2022 PAGE NO 20 SI NO 6.05 ITEM NO 305 (a)

12 mm thick plaster with cement and coarse sand of1.25 fineness modules in (1:4) over brick work minimum thickness not to be less 4 than 1 cm including supply of all material, labour, tools & plant etc required for proper completion of the work. (AS PER PWD SOR 2022 PAGE NO 36 SI NO 13.11 NEW ITEM

Providing wall putty on old surface with approved quality material of Berger/J.K./Birla or similar make 2 coats

Finishing wall with weather coat by premium acrylic exterior paint applied @ 3.28 ltr/10 sqm (Asian or Berger Brand) of approved make and quality on wall with two or more coat to give an even shade including a priming coat with cement primer of approved

M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from 7 including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work.

Painting or varnishing with valsper or other approved high grade enamel or superior synthetic clean varnish complete one coat Jover previously painted surface including supply of all materials, labour, Tools & plants etc.

S/L of stone ballast 22.4 to 53 mm size with stacking for 10 measurment etc 9 all complete as per the direction of engineer in-charge. AS PER PWD SOR 2020 RMR