For Replacement of old and damaged 11 kv XLPE cable at 1. Near Shaheed path S/S Ambedkar university and 2. Near Shaheed Path, Arjunganj, Lucknow and installation of 11 kv RMU at both places and associated work.

Amount

Safe Dragging, loading, carriage and unloading of following store materials with proper stacking from ESC Daliganj to JE dump store and JE dump store to work site within municipal areas.

11 KV 3x185 sq mm XLPE cable

11 KV 3x185 sq mm I/D

11 KV 3x185 sq mm O/D

11 KV 3x185 sqmm St/Th

M S Earthing Rod 20x2500 mm

Pipe boring type earthing minimum 20 mtr deep from ground level or upto water level with B class G.I. pipe 2 " dia. Connection of equipment with earthing included in the job as per specification/norms for 11 KV RMU

Supply, erection and commissioning of 11 KV RMU 3 way as per approved drawing

Construction of plinth suitable for 11 KV RMU 3 way

Construction of Toe wall around RMU Plinth of size 0.75 x 0.25 mtr. at base and 0.25 mtr. at top as per RESSPO norms by first class bricks in the ratio 1:6, base concreting of the wall to be done in ratio 1:6:12 and plaster 12 mm thick in ratio 1:4 (All materials shall be provided by contractor).

Fabrication and erection of RMU fencing with tennis wiremesh 10 SWG (37mmx50mm), 2.5 mtr height as per drawing along with Fabrication of one number gate made of MS angle, MS channel, MS Flat together with locking arrangement and its installation (All materials shall be provided by contractor).

Laying of 11 KV XLPE cable 3x185 sq mm D/C by digging of trench 900 mm deep & 750 mm wide its boxing with bricks & sand, laying of cable & separation of cables by brick wall, filling of sand up to top cover of the trench properly levelling & ramming & covering with stone slab after laying of cable. The ferruling of cable is also included in this work (All material shall be provided by contractor except 11 KV cable)

Laying of 11 KV 3X185 sq mm XLPE single cable by drill method through HDPE-Pipe at road crossing/nallah crossing (All materials shall be provided by contractor except 11 KV cable)

Laying of 11 KV single cable in normal soil for loop as per norms.

Digging of pit of size 3x2x1 mtr. for making straight through joint 11 KV work involved filling of soil levelling and ramming of the same.

Making Heat & shrinkables joints of following sizes and types 11 KV 3x185 sqmm XLPE cable by Heat and shrinkables jointing kits. (Jointing kit will be provided by deptt. )

Straight through for 11 KV 3x185 sqmm

Outdoor/Indoor end termination kit for 11 KV 3x185 sqmm XLPE cable

Hoisting of 11KV, 3x185 sq mm XLPE on D/P with G.I. pipe 4" dia , clamp nut and bolt and other required material (All materials shall be provided by contractor except 11 KV cable)

Hoisting of 11KV, 3x185 sq mm XLPE in RMU Pannel/CSS with flexible pipe, clamp, nut and bolts (All materials shall be provided by contractor except 11 KV cable)

Earthing of required equipment with MS-Earthing Rod 20x2500 mm, Earth wire with nut and bolt as per RESSPO norms (All materials shall be provided by contractor except MS-Earthing Rod).

High Pressure Testing.

Connection in between 11 KV line and RMU.

Sidhi Enterprises