Loading…
Loading…
Tender Value
₹15.0 L
EMD Value
₹37,500
Closing Date
15 Aug 2024, 10:59 pmClosed
Directorate of Municipal Administration
PARASHURAM M CHALAVADI
9110888518
CONSTRUCTION OF FENCING, PAVERS AND BUILDING STRUCTURE ON THE SIDE OF HEGEERE JACKWELL WHICH SUPPLIES WATER TO THE CITY AT HAVERI CMC
DMA/2024-25/OW/WORK_INDENT19649
DMA/2024-25/OW/WORK_INDENT19649
Open
Other Works
Electronic Documents, First(One Cover)
DMA City Municipal Council Haveri
5 documents required · 5 mandatory
₹500
₹37,500
22 Jul 2024
22 Jul 2024
6 Aug 2024
CONSTRUCTION OF FENCING, PAVERS AND BUILDING STRUCTURE ON THE SIDE OF HEGEERE JACKWELL WHICH SUPPLIES WATER TO THE CITY AT HAVERI CMC
Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cautio...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relev...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m hei...
Centering and Shuttering :Additionalities for formwork,centering and scaffolding Added on finished rate of concrete for formwork 1.Foundation upto Plinth b. All other types 3percent CSR -23-24,V...
Centering and Shuttering :Additionalities for formwork,centering and scaffolding Added on finished rate of concrete for formwork 2.Plinth Beams of Building 50 percent CSR -23-24,Vol-1, Addendum ...
Centering and Shuttering :Additionalities for formwork,centering and scaffolding Added on finished rate of concrete for formwork 9.RCC Columns or Shaft Slip Centering 70 percent CSR -23-24,V...
Filling approved earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming an...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. ...
Centering and Shuttering :Additionalities for formwork,centering and scaffolding Added on finished rate of concrete for formwork 2.Plinth Beams of Building 50 percent CSR -23-24,Vol-1, Addendum ...
Centering and Shuttering :Additionalities for formwork,centering and scaffolding Added on finished rate of concrete for formwork 9.RCC Columns or Shaft Slip Centering 70 percent CSR -23-24,V...
Centering and Shuttering :Additionalities for formwork,centering and scaffolding Added on finished rate of concrete for formwork 14.RCC Beams, Lintels and Troughs of Aqueducts 60 percent CSR -...
Centering and Shuttering :Additionalities for formwork,centering and scaffolding Added on finished rate of concrete for formwork 19.Chejjas, Canopy and Other Architectural projections of minor ...
Centering and Shuttering :Additionalities for formwork,centering and scaffolding Added on finished rate of concrete for formwork 14.RCC Beams, Lintels and Troughs of Aqueducts 60 percent CSR -...
Centering and Shuttering :Additionalities for formwork,centering and scaffolding Added on finished rate of concrete for formwork 15. RCC Roof Slabs 50 percent CSR -23-24,Vol-1, Addendum I - Page...
Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping or welding joints...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar1:6 1 cement : 6 coarse sand including cost of all materials, labour,...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 1 cement: 3 fine sand to brick masonry including rounding off corners wherever required smooth rendering, pr...
Providing 12 mm cement plaster with cement mortar 1:4 1 cement: 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, ...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC Volatile Organic Compound content less than 50 grams or litre of approved brand and manufacture, including applying ...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a pri...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Finishing with Epoxy paint two coats at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...
Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry m...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified...
Supplying and replacing ceiling fan regulator 900mm to 1500mm. PWD Electrical SR 2023-24 12.6 P.NO.48
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. PWD Electrical SR 2023-24 3.6.1 P.NO.9
Supplying and fixing of retrofit type - LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70 percent . efficacy 80 lumen per W, life 25000 burning hours and ...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket 1x40 or 2x40 W fluorescent tube street light fitting of all capacities to...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...
Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thickconfirming to IS 2509 with suitable size bends, junction boxes,
adhesive paste etc , and fixing using inverted wood plugs in case of ...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete PWD Electrical SR 2023-24,item no 6.2.1 p.no.30
Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same with CM 1:4 etc. complet...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Construction of Embankment by excavating the available approved Gravel or Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, sprea...
Providing and constructing 300 mm thick rubble stone pitching set in CM 1: 5 proportion by volume with pin headers at 2 per m2 including cost of all materials from approved source, labour, packing s...
Furniture, Chairs and Table etc.executed quantity only.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-1.doc
Tender Document • 0.44 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].