Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.2 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹11.5 L+₹15,676 (1.38%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹12.6 L+₹1.3 L (11.3%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹12.9 L+₹1.6 L (14.3%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹13.1 L+₹1.8 L (15.6%)Rejected-Finance | L5 | Rejected-Finance NOT LOWEST |
Tender Value
₹15.0 L
EMD Value
₹30,000
Closing Date
27 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE DEOLALI
HQ CWE DEOLALI, ONSLOW ROAD, DEOLALI (MH)
AS PER TENDER DOCUMENTS
2024_MES_640235_1
86959/E8
Open Tender
Civil Works
Item Rate
180 days
DEOLALI
AS PER NIT
7 documents required · 7 mandatory
₹500
Yes
GE DEOLALI
₹30,000
Yes
4 Mar 2024
1 Feb 2024
29 Feb 2024
1 Feb 2024
27 Feb 2024
15 Feb 2024
2 Feb 2024 - 8 Feb 2024
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M & L Vitrified ceramic tiles (light shade) 8 to10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. with and including 15mm thick screed bed in cement mortar 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.
All as No 2 above but in skirting over 10mm thick backing coat in cement mortar1:4 complete all as specified and directed
M & L for joint free non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over and including 15mm screed in cement mortar 1:6 or with chemical cement to match all as directed.
M&L for joint free coloured glazed ceramic tiles in vertical surface of size 300X 600X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in cement mortar 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified.
Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed.
M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including rubbing and polishing complete all as specified.
M & L for 16-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes complete all as specified.
M & L for 15 mm thick Artificial Granite (of any type) work steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes complete all as specified.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed.
S&F 2nd class wood glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) including complete all as specified and as directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.
S&F Aluminium wire netting nominal dia of wire 1.40mm and size of mesh 12mm and fixed with stainless steel wire stapples complete all as specified and directed.
M&L for preparation of New untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan
Ditto but of Frame size 65x 125 mm double rebate
S&F 28-30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified
S & F powder coated aluminium sections for doors, windows, partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) Glass panes/wire cloth will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India
S&F for powder coated aluminium ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.
S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.
Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed
S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification. Make : ECHON/Sintex/Rajshree/Navratan
S&F auto closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele
S&F Ball bearing runners 45 mm Telescopic channel (KTS-20) full extension load capacity 50 kgs, Make :Hexa, Hettich, Hafele
S&F Hasp and staple, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws 125mm size.
S&F for door/shutter catcher, magnetic stopper/holder with striking plate for WPC board cabinets, cupboard shutters complete all as specified.
S&F 100 mm long Butt hinges, stainless steel with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed.
S&F brass floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and as directed.
S&F 150 mm long Extruded stainless steel handles designer type, fabricated type polished complete all as specified and as directed.
S&F 100 mm long Extruded stainless steel handles designer type, fabricated type polished complete all as specified and as directed.
S&F 150mm size stainless steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.
M&L for 250mm long stainless steel sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.
S&F in repair 25 mm stainless steel curtain rod complete all as specified and directed by Engr-in-charge.
S&F SS heavy duty decorative brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed. Note: Curtain rod shall be measured and paid separately
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes coupling and waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm
S&F in repair rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 25mm bore complete for following capacity of tanks
S&F in repair15mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F in reapir 20mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F in reapir 25 mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed.
S&F in repair 25mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.
S&F in repair 20mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.
Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed.
S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.
S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.
S&F PVC (SWR) bend with access door any radius 110mm complete all as specified and directed.
S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc complete all as directed.
Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed.
S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed.
S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as directed.
Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed
M&L for cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in coping, bed blocks, filling of hold fast PCC or similar works including formwork complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in subase finished to receive floor treatment etc complete all as directed.
M & L for chequered cement concrete tiles rubber moulded , 30cm x 30cm x 25mm thick confirm to IS 13801-1993 , set jointed & pointed in neat cement slurry with grey cement and pigment in floors complete all as specified and directed
M&L for Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes
S&L machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 60mm thickness grey cement and with pigment , M-35 grade complete all as specified and directed.
S&L machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 80mm thickness grey cement and with pigment , M-40 grade complete all as specified and directed.
M&L Sand filling under floors or in foundations including watering and consolidation
Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for Rendering in 10 mm thick Ready Mix Plaster of Make- ACC’s “ACCOPLAST” / CK Birla’s “AEROCON” / Speed Dry Mix’s “ECO PLASTER” / “MAGIC PLAST” / “BUILDWELL on brick work or concrete surfaces of any description in wall/ceiling etc finished surfaces even and smooth with sogol finish complete all as specifed and directed.
M&L for Rendering in 12mm thick Ready Mix Plaster of Make- ACC’s “ACCOPLAST” / CK Birla’s “AEROCON” / Speed Dry Mix’s “ECO PLASTER” / “MAGIC PLAST” / “BUILDWELL on brick work or concrete surfaces etc finished surfaces even and smooth complete all as specifed and directed.
M&L for 5mm thick ceiling plaster on concrete surfaces in CM 1:3 finished even and smooth with a thin layer of sagol.
S&F Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement
Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc bu exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.
M&L for Brickwork with fly ash Old size bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6 etc complete all as directed.
Ditto all as per above but except bricks
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces
M&L for preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer and finally applying two coats of oil emulsion distemper etc complete all as directed.
M&L Preparation of new plastered or unplastered surfaces including Washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of oil emulsion distemper (white or tinted) on walls complete all as specified and as directed.
M&L for applying 2mm thick wall care putty on wall
M/s. JBSR ENTERPRISES.
J Sams Contructions
M/S B R BHALERAO
VS CONSTRUCTION
sunway associates
M/S Chandan Construction Company
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .