Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹33.3 L
EMD Value
₹66,500
Closing Date
28 Jan 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
P.WAY
30 conditions · 2 needing a document upload
Whether History sheet of tenderers (Annexure-2 of Part-II of Tender documents) uploaded duly filled in with supportive documents.
Whether the details of facilities available vis-a-vis the requirements mentioned in STR in a tabular/narrative form if you are not on the approved list of RDSO, if required in the Annexed Document, is submitted.
Whether, EACH PAGE of the copy of documents/certificates in support of credential is self attested/digitally signed by tenderer/authorised representative with signature, stamp & date.
Whether all the documents related "Mandatory Requirement", as applicable and mentioned in the bid documents are enclosed with the tender.
Please submit bank details as per enclosed Annexure-12 of Part - II of Tender Documents or photo copy of a "Cancelled Cheque". (For details refer tender documents)
Please submit Certificate of Familiarisation as per Annexure-1 of Part-II of Tender Documents. (For details refer tender documents)
Please submit required details as required from Annexure 2 to 11 of Part-II of Tender documents duly filled in and signed. Supportive documents/separate sheet are to be submitted, if required. Annex-2: HISTORY SHEET OF THE TENDERER, Annex-3: TECHNICAL EIGIBILITY CRITERIA, Annex-4: DETAILS OF CONSTRUCTIONS MACHINERIES, TOOLS & PLANTS, VEHICLES ETC. AVAILABLE (ON HAND AND PROPOSED TO BE UTILISED, Annex-5: DETAILS OF TECHNICAL AND OTHER PERSONNELS AVAILABLE ON HAND & PROPOSED TO BE ENGAGED. Annex- 6: DETAILS OF WORKS COMPLETED DURING PREVIOUS THREE FINANCAIL YEARS & CURRENT YEAR, Annex-7: DETAILS OF WORKS ON HAND, Annex- 8: DECLARATION REGARDING ASSOCIATION OF RAILWAY OFFICER (S) WITH TENDERER(S), A n n e x - 9 : LIST OF COURT CASES, Annex-10: LIST OF ARBITRATION CASES. Annex- 11: BROAD PLAN FOR EXECUTION OF THIS WORK. (For details refer tender documents)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm/Partnership firm/Joint Venture/Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender . The tenderer(s) shall enclose the attested copies of the constitution of their concern and copy of PAN card along with the tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (for details refer tender documents) NOTE: Any document containing PAN number of the tenderer(s) shall also be considered in lieu of PAN card. However, if no document having mention of PAN number is uploaded, offer will be summarily rejected. (For details refer Tender documents)
For all tenders having advertised cost of Rs.10 lakh or above, the contractor shall have to submit the option to take payment from Railways through a letter of credit (LC) arrangement. The tenderer shall affirm having read over and agreed to the terms and conditions of the LC option. The option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter, during execution of contract. (The tenderer have to submit the option to take payment from Railway through a Letter of Credit arrangement) (For details refer Tender documents)
The list of personnel / organization on hand and proposed to be engaged for the tendered work. Similarly, list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work. (For details refer tender documents)
Documents to be submitted as per Clause 14 of GCC-April 2022 in support of (a)Sole Proprietorship firm (b) HUF (c) Partnership Firm (d) Joint Venture (JV) (e) Company registered under Companies Act 2013 (f) LLP (Limited Liability Partnership) (g) Registered Society & Registered Trust. (for details refer tender documents) NOTE: Non submission of above documents will lead to summarily rejection of the offer.
Procurement of spares and installation in SQRS-45&46 during IOH at IOHD/KUR of Khurda Road Division.
eTender-TMKUR-334-2025~ECOR
eTender-TMKUR-334-2025
Open
Works - General
1 Months
Khordha, Odisha
₹0
₹66,500
28 Jan 2026
6 Jan 2026
14 Jan 2026
26 items across 1 schedule · ₹33,25,720.26 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | SUCTION FILTER ELEMENT (Part No. C100000113010101) | Numbers | 2.00 | 70,978.18 | 1,41,956.36 |
| 2 | DUPLEX SPROCKET (Part No. C1000001133101600B) | Numbers | 2.00 | 1,01,739.6 | 2,03,479.2 |
| 3 | SPROCKET FOR SIMPLEX CHAIN (Part No. C1000001130400602B) | Numbers | 3.00 | 1,39,914.96 | 4,19,744.88 |
| 4 | DUPLEX CHAIN (1.5" Pitch) (Part No. C1000001132200100B) | Numbers | 8.00 | 55,321.94 | 4,42,575.52 |
| 5 | DUPLEX CHAIN LOCK (Part No. C100000113020203) | Numbers | 10.00 | 5,752.5 | 57,525 |
| 6 | SIMPLEX CHAIN (1.5" Pitch) (Part No. C1000001132200200B) | Numbers | 8.00 | 37,952.34 | 3,03,618.72 |
| 7 | SIMPLEX CHAIN LOCK (Part No. C100000113020303) | Numbers | 10.00 | 5,752.5 | 57,525 |
| 8 | DRIVING CHAIN (SIMPLEX CHAIN 1",CHAIN LENGTH = 2134MM) (Part No. C1000001131501800B) | Numbers | 8.00 | 24,677.34 | 1,97,418.72 |
| 9 | DRIVING CHAIN LOCK (Part No. C100000113020203) | Numbers | 10.00 | 5,752.5 | 57,525 |
| 10 | D E E P GROOVE BALL BEARING (6216 ZZ) for DUPLEX SPROCKET (Part No. C1000001133101700B) | Numbers | 16.00 | 8,746.16 | 1,39,938.56 |
| 11 | BALL BEARING (Part No. C1000001130400605B) | Numbers | 16.00 | 17,251.6 | 2,76,025.6 |
| 12 | BUSH FOR TURN TABLE (Part No. C1000001130300003S) | Numbers | 4.00 | 3,257.98 | 13,031.92 |
| 13 | EXTRA LIFTIG CYLINDER FORK HEAD. | Numbers | 2.00 | 4,684.6 | 9,369.2 |
| 14 | RAIL CLAMP CYLINDER (Part No. SE61926000POS28) | Numbers | 2.00 | 33,745.64 | 67,491.28 |
| 15 | FIXED DISPLACEMENT MOTOR (FAN) (Part No.C1000001136000POS4) | Numbers | 1.00 | 2,79,609.26 | 2,79,609.26 |
| 16 | RUBBER COUPLING (MAKE CENTAFLEX) (Part No. 871637000000) | Numbers | 1.00 | 93,427.68 | 93,427.68 |
| 17 | RUBBER COUPLING (MAKE CENTAFLEX) (Part No. 1466513000000) | Numbers | 1.00 | 89,829.86 | 89,829.86 |
| 18 | PIN FOR DRIVING (Part No. C1000001131500200S) | Numbers | 1.00 | 25,050.22 | 25,050.22 |
| 19 | TAPPER ROLLER BEARING FOR WHEEL (Part No. C100000113-150-11-00B) | Numbers | 4.00 | 20,157.94 | 80,631.76 |
| 20 | RAIL CLAMP CYLINDER FORK HEAD (Part No. C100000113-060-11-00S) | Numbers | 8.00 | 4,419.1 | 35,352.8 |
| 21 | BUSH FOR WHEEL PIN (Part No. C100000113- 150-04-00S) | Numbers | 1.00 | 18,400.92 | 18,400.92 |
| 22 | RELAY (14 PIN, 24V DC) GUARDIAN 22D1A-124 COIL (Part No. 14 PIN, 24 DC) | Numbers | 1.00 | 7,058.76 | 7,058.76 |
| 23 | 30 CORE CABLE LENGTH 5.5 Mtr. (Part No. 30 BCCS) | Numbers | 1.00 | 70,800 | 70,800 |
| 24 | DRIVING MOTOR HOUSING BRACKET (Part No. C100000113 150 19 00 S) | Numbers | 2.00 | 41,300 | 82,600 |
| 25 | For deputation of service engineer for attending the machine per 8 (eight) hours a day | Per Day | 10.00 | 14,080.94 | 1,40,809.4 |
| 26 | Charges for journey on deputation of Service Engineer (Per KM) from Firm's premises (say Bhilai/OEM work shop) to IOHD/KUR and back. | Kilometre | 1488.00 | 10.03 | 14,924.64 |
| Schedule total | ₹33,25,720.26 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .