Annual Repair and Maintenance of Civil Work at Amber Palace, Jaipur

Carriage of Building Rubbish Stone Metal grit ballast etc.with a lead of 10 Kms.(G-4.1/4.2)

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).(B-3/3.1.2).

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). (B-3/3.1.4)

Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand).(B-6/6.1.6).

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm. thick walls in : Cement Mortar 1:6 ( 1-Cement : 6-Sand).(B-6/6.2.6)

Stone work (machine cut edges) for Wall cladding/ Veneering work up to 10m height with 20 to 30 mm thick Red Sand Stone (Karauli ) and backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :(To be secured to the backing by means of cramps which shall be paid separately) Exposed face machine cut (B-6/6.8.2)

Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 :Upto 15 cm. thick. (B-6/6.18.1)

Dry Cleaning of sofa sets using shampooing machine with all materials & drying it do the level using machinery at designated place by engineer-in-charge one seat of sofa (payment for multi seater sofa will be done as the number of seats of that sofa.)

Single Seater Sofa

Two Seater Sofa

Three Seater Sofa

Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 on walls, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Size 600mm x 1200mm

Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm comfirming to IS : 13755 and IS 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4) (B-7/7.13)

Providing & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade :Ghana teak wood Grade - I. (B-8/8.1.5)

Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.(B-8/8.26)

Providing and fixing steel gate, grating and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide (B-9/9.8)

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 25 mm thick.(B-12/12.2.1)

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete Old Plastered Surface (two or more coats)(B-12/12.22.2)

Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand) : Raised and cut pointing.(B-12/12.31.2)

Painting with synthetice enamel paint of approved brand and manufacture to give an even shade :

(a) Two or more coats on new work.(B-12/12.46.1)

(b) One or more coats on old work.(B-12/12.46.2)

French sprit polishing :

(a) Two or more coats on new work including a coat of wood filler.(B-12/12.48.1)

(b) One or more coats on old work(B-12/12.48.2).

Providing and applying Melamine polish on teak wood work of approved brand and manufacture to give an even shade with two or more coats by compressor including sand papering, wood filler coat etc complete in all respect:

New Surface

Old Surface

Renewing glass panes with wooden fillets wherever necessary:

(a) 4mm thick plain glass panes.(B-13/13.4.1).

(b) 5mm thick plain glass panes.(B-13/13.4.2).

Providing and fixing double scaffolding system on the exterior side, upto five story made with 4" wooden member 1.5 m c/c horizontal and vertical direction joining with rassi, clamps, challies. The scaffolding system shall be stiffened with bracing, runner, connection of building if necessary with all essential safty features for the workmen etc complete as per direction of EI.The lavation area of the scaffolding shall be measured for payment. The payment will be made once irrespective of duration of scaffolding. Note : This item to be used for maintence work judically(B-13/13.22)

Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P brass/ stainless steel screws Al. Tower bolt & Al. handle & Al Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately).For fixed portion Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)

For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately).Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer)

Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.With glass panes of 4.0 mm thickness ( weight not less than 10.0 kg/sqm) as per IS : 2835.

Barricading with Sal ballies as per design including tying with vertical post by coconut strings including digging out holes in all types of soil complete in all respect with two horizontal members height 1.2 m upto 1.5m above ground level and vertical supports upto 2.5 centre and upto 3 days period including removal and cleaning the site complete in all respect & including dressing of sides and providing retro reflective tapes for traffic safety as per direction of Engineer-in charge in all types of soil. (S-5/5.18)

Add extra for item No. 5.18 & 5.19 in barricading for each subsequent day after 3 days(S-5/5.20)

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

Providing and fixing in CM 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry :Size 125 x 100mm(B-15/15.25.2)

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete Old Plastered Surface (two or more coats)

Providing and applying superior quality emulsion for wall painting with Velvet touch/Royal paint etc of approved brand and manufacture to give an even shade with putty and preparation of surface applying with the help of paint roller the work complete in all respect as per direction of Engineer-in-charge.Old Work Analysis

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.2.0mm thick (Wt. 3.3 Kg./Mtr. Sq.)

Supplying and fixing Flat rain water spouts 25 Cm. Wide in Soorsagar stone clopped chhajja including cutting & moulding.

Providing and Applying ACRYLIC emulsion polymer waterproofing chemical coating, on over roof on over roof slabs/terrace/balconies/parapet wall etc.with following method/specification: Paint the surface with regular paint brush so as to obtain approximately 0.3mm thickness coating. apply the 2nd coat next day at right angles to the 1st coat so that total thickness of the coating should be approximately 0.6mm coverage by using above formulation will be 40 ft2/ litre of chemical. painted surface does not require any external water curing since chemical will hold sufficient water for curing.After the primer coat Apply 2 coats of modified acrylic emulsion polymer water proofing compound having solar heat reduction properties coating @ 0.330 KG/SQM on the surface of the interval of 3-4 hours. Undulation on the surface is repair before the waterproofing work.

Supply of Labour as per requirment with required Tools & plants

(a) Mason (for plain stone work) 2nd class(Code no.125)

(b) Beldar(Code no.114)

(c) Fitter (grade 1)(Code no.116)

(d) Carpenter 1st class(Code no.111)

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE Part- B Based on PWD BSR 2022 (Sanitary Works) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors:

(i) Exposed on wall - 15 mm dia nominal bore ''B' Class (S-2/2.1.1)

(ii) Exposed on wall - 20 mm dia nominal bore ''B' Class(S-2/2.1.2)

(iii) Exposed on wall - 25 mm dia nominal bore ''B' Class(S-2/2.1.3)

P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.

(i))15mm dia nominal bore 'B' Class(S-2/2.2.2)

(ii)25 mm dia nominal bore 'B' Class(S-2/2.2.5)

(iii) 50mm dia nominal bore : 'B' Class(S-2/2.2.6)

P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :

(a) Gun-metal 15 mm nominal bore.(S-2/2.15.2)

(b) Gun-metal 25mm nominal bore. (S-2/2.15.3)

(c) Gun-metal 50mm nominal bore.(S-2/2.15.6)

Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size :

(i) 15mm dia nominal bore(S-2/2.32.1)

(i) 25 mm dia nominal bore(S-2/2.32.2)

(ii) 50mm dia nominal bore(S-2/2.32.6)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)

20mm nominal size

25 mm nominal size

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work).

50 mm nominal size

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.

(a) 110 mm dia(S-3/3.16.3)

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.

160 mm dia

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:

(a) Coupler (socket) - 110mm dia(S-3/3.17.1(ii))

(b) Plain Tee - 110mm dia(S-3/3.17.3(ii))

(c) Bend 87.5 - 110mm dia(S-3/3.17.9(ii))

(d) Door Bend (Top Side) - 110mm dia(S-3/3.17.10(ii))

Supplying and fixing Ferro- cement cover with C.I. frame for chambers & man holes of size.

(a) 500mm dia 25 Kg.-do-70 MT centre point load seal type (Heavy duty.)(S-3/3.32.4)

(b) Rectangular shape 600 x 450 mm, to withstand 3 MT center point load & minimum unfractured load of 1 MT. (Light duty).(S-3/3.32.5)

Supplying & Fixing R.C.C. Manholes covers with frame of approved make (Light duty).

(a) Size 450mm dia(S-3/3.33.2)

(b) Size 600x600mm (Double seal)(S-3/3.33.4)

(c) Size 600x450mm (S-3/3.33.5)

P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity.(S-2/2.26.3)

P & F White Vitreous China Double Syphonic European W.C. (I.S:2556Mark) with mounted W.V.C. flushing cistern of (IS : 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor.

P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm.

P & F Premium quality Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make as per Engineer-in-charge with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall :

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE Part- C Based on RUIDP SOR 2023 (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Lime Surkhi Plaster 1:2 (1 Lime : 2 Surkhi) including preparation of mortar by traditional practice (by grinding) in coarse for base coarse and subsequent coarse & Loi, tamping, beating, curring till the shrinkage cracks are disappear. The work is to be done with all lead as the work of restoration nature as per Jaipur practice including adding, gur, methi & gugal, on old walls including removal of all old loose and decayed plaster, each coat to be done after 3 days of previous coat. (a) 33 mm thick in four coats

Deduct for plaster work if lime kara applying on plaster as finishing coat.

Araish plaster (as per Jaipur practice) 1:2 ( 1 lime : 2 Zikki) on lime plaster or plane back ground including preparation of lime for 6 months by slaking of lime with curd and changing the water every week. The Kara plaster of not more than 6mm thick is to be left the maximum of 3 months to appear the shrinkage & temperature cracks. Over the Kara plaster 2mm layer of grinded lime putty is to be done and is to be rubbed Gently by Akik stone. Then adding Khoppra & Ghee and inserting the design of colour boarder all round.

Coloured plain Araish work 1:2 (1 lime : 2 zikki) on lime plaster or plane back ground including preparation of lime for 6 months by slaking of lime with curd and changing the water every week. The Kara plaster of not more than 6mm thick is to be left the maximum of 3 months to appear the shrinkage & temperature cracks. Over the Kara plaster 2mm layer of grinded lime putty is to be done and is to be rubbed Gently by Akik stone. Then adding Khoppra & Ghee and inserting the design of colour boarder all round including desired colour stone pigment to match the existing colour.

Providing & applying Lime Kara 1:2 (1lime cream : 2 Zikki powder) grinding mortar with grinding mill/manualy on lime base, on flat surface in two coats. First coat applying 3mm to 4mm. thick and curring properly at least 7 days, second finishing coat done after 7 days of previous coat as per traditional practice. (thickness not more then 6 mm.)

Add extra for Lime Kara work (on lime plaster base) other then flat surface as per traditional practice with all lead & lift with fine finishing complete in all respect on ….

(a) domical surface / spherical surface / domical ceiling,

(b) curved surface

Providing & applying Lime Kara on stone work only having carving stone work/decorative stone work (stone pillars ,stone arches,railings etc.) as per traditional practices as per specifications with grinded mortar in two coats with finishing complete in all respect.

Providing and fixing fine dressed sand stone /approved stone traditional work as per existing matching geometrical design including moulding work with fine finishing, fixing with thambli by proper adhesive and white cement with pigment including making grooveete complete all respect.

Making Kangoora on top of the wall as per Jaipur traditional practice with tile brick in grinded lime Surkhi mortar 1:2, thickness of kangoora 15 cm. & height 45 cm., finishing with lime surkhi mortar 1:2, complete in all respect upto 10.00 mtr. from ground level including all scaffolding, lead & lift.

Providing and fixing stone Patties (slab) on roofing including removing broken patties carefully and replacement new slab with Kharanja, ralthal and lime dhar as per traditional practice. Span about 3.30 mtr. To 5.50 mtr. 100 mm to 150 mm thick of approved stone.

Scraping & Removing of white wash/ distemper / algli etc. form plain plaster & surfaces gently with care to keep intact the old designs.40.25

Providing and laying lime Dhar on roofing as per Rajasthan, Jaipur traditional practice with lime, Surkhi, old lime powder, brick aggregate 12 to 20mm (1:2:2:2) and using Methi, Gur, Hemp, Belgiri etc. including beating and temping 100 to 150mm thick as per specifications. Including dismantling of old detoriated roofing40.29

Providing and fixing double leaf Door wooden shutters made of 1st grade M.P. teackwood as per traditional design (Deshi pattern) planks thickness 40mm and width of Binies, Andheri 50mm and thickness 35mm, including Adwa etc. with fittings (nails, sankal, kunda, cheri, handle etc.) as per existing matching / as per approved design with moulding / carving complete in all respect. M.P teak wood grade Ist

Providing and fixing double leaf Window wooden shutters made of 1st grade wood as per traditional design (Deshi pattern) planks thickness 25mm and width of Binies, Andheri 35mm and thickness 25mm, including Adwa etc. with fittings (nails, sankal, kunda, cheri, handle and patti etc.) as per existing matching / as per approved design with moulding / carving complete in all respect. M.P teak wood grade Ist(40.36.1)

Chemical treatment of sand stone to clean from yellowness, blackness, algal growth, dust, dirt oily accretions, lime & gypsum deposits, filling of cracks joining of gaps / pointing, strengthening of weak stone, removal of salt effect and application of preservative coating to prevent from algal growth and make the stone water proof.(40.43)

Chemical treatment of marble stone to clean from yellowness, blackness, algal growth, dust, dirt oily accretions, lime & gypsum deposits, filling of cracks joining of gaps / pointing, strengthening of weak stone, removal of salt effect and application of preservative coating to prevent from algal growth and make the stone water proof.(40.44)

Khameera Colour Washing as per traditional practice to prepare the Khameera the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding curd Gugal, for non-synthetic colour adding gum (babool gum) as per specification. Then applying prepared solution on walls three to four thin coats as desired finishing.

Deduct for khameera work if kangoora / design / lining work not done

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE PART "D" BASED ON NON BSR (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Filling of Stone Pitching open joint in Pathways with cement concrete 1:2:4 including cleaning of joints properly and curing of joints upto 7 days complete as directed by Engineer In Charge.

Providing & Laying 40mm Thick Dholpur white stone size 8'' x 8'' over hoisting arrangement groove in Jaleb chowk Amber including making of groove in stone as per design approved including removal and disposal of old broken piece of stone with carefully etc. complete as directed by Engineer In Charge.

Oiling with linseed oil (two or more coats) on wooden doors & windows and wooden railing at variuas place in Amber Palace including filling of craks & preparation of base with putty etc. painting two coats of antitermite paint by using chemical emulsion as per IS : 10013 (Part III)-1989 and Painting two coats with oil type wood preservative of approved brand complete in all respects as per direction of Engineer In Charge including all leads and lifts.

Removing & refixing of 30-35mm thick sand stone in lime surkhi mortar 1:2 and pointing of flooring with lime surkhi mortar 1:2 including pigment to matching the shade.

Removing & refixing of 75mm thick sand stone in lime surkhi mortar 1:2 and pointing of flooring with lime surkhi mortar 1:2 including pigment to matching the shade.

Supplying & fixing fine dressed 35mm to 40mm thick "flooring" with white / light pink sand stone (machine grinded surface) machine cut of approved shade set in pattern over 30mm thick base of lime surkhi mortar 1:2 including jointing with lime putty and stone powder with an admixture of pigment, complete in all respect.

Providing & fixing in lime surkhi mortar 1:2, Single paitam (rebated) store doors, window and ventilator frames as per existing matching or approved quarry including removing of damaged parts of frame, the cuting of corner as per drawing complete in all respect. size 125mm x 125mm

Random Rubble stone masonry for foundation and plinth in Lime surkhi mortar 1:2 above 30cm.thick walls in : ( 1-Lime Putty : 2-Surkhi, including adding admixture like gur, methi etc. in mortar)

Random Rubble stone masonry for superstructure, 4.50 mtr. Height above plinth level / one storey height, above 30cm.thick walls in Lime surkhi mortar 1:2 : ( 1-Lime Putty : 2-Surkhi, including adding admixture like gur, methi etc. in mortar)

Providing and Fixing "Cobbles" on path way / open court yards over 40mm thick cement sand motor 1 :3 , including keeping 10mm joint between cobbles filled with masaldar grinded lime surkhi mortar 1:1 complete in all respects. The mortar should remain recessed by 5mm from the top surface of the cobble stone.(a) 150 mm. thick

Removal of Bee hives from various places such as Chhajas in Amber Palace approx ht.100' to 150' .The Rates are including providing necessary scaffolding (Like Jhula, Ladder etc.) with all lead.lift and safety arrangements.After the removing of Bee hives the surface to be cleaned neatly &necessary chemical coating be applied on surface as per direction of Engineer In Charge.

Refixing and repair of heritage wooden chool doors and windows with required fitting such as nails, sankal, kunda, cheri, handle,hinges etc.and providing and fixing new stone frames/old frames if required complete as per direction of Engineer in charge

Replacing of old damaged wooden strips by new strips including enamel paint, labour & Hardware complete in all respect as per direction of Engineer in charge.

Providing & Fixing Brass fittings on existing wooden doors of approved make including removal of old fittings complete as per direction of egineer in Charge. Aldrop of Size 250 mm

Removal and Refixing of Stone Chhaja 50 to 75mm thick stone used to be similar to the existing ones at the site cutting in proper shape and providing interlocking keys in the new as well as old stone for proper bonding including finishing the edges in all respect in lime surkhi mortar ( 1 lime putty : 2 Surkhi)

Applicable Codes and Standards Work shall be carried out as per latest edition of Indian Standards and Code of Practices. List given here shall not be considered as conclusive and is for reference and guidance only. Any discrepancies/ conflict noticed shall be brought to the notice of Architect/Engineer in charge fordirection / approval. However, as a general rule more stringent specification shall take precedence. IS 277 Galvanized steel sheets (plain and corrugated) IS 1200 Methods of measurement of building and civil Engineering works Materials * All clamps, fittings, accessories should be made out of first grade quality galvanized steel conforming to IS 316. All products should be made out of 0.6mm (24g) galvanized sheet.• All galvanized steel fittings and accessories should be cleaned, phosphatized and finished with one coat of epoxy etching primer of 30 microns of polyurethane paint. All panels / doors should be oven baked for durability and finish. * Pilaster shoes wherever applicable should be of stainless steel of grade 316 • The panels and doors should be constructed out of 12mm thick merino laminate or any other optional material as specified by the architect. • All panels should have a built in feature to be totally sight proof on all four corners for better privacy. Standard gap of 150mm on sides and on moving element has to be provided unless otherwise specified or scheduled in the drawing or layout. • Cubicles should have a provision for mounting of the toilet hardware like handrails, hinges, locks with indicator, coat hooks, tissue holders and taps as per scheduled and specified. All panels should be fully protected with the self adhesive film and to be removed at the handing over of the cubicles Compartment Depth and Width: As per the drawings Modal type - Stylam cuboid NUVO Modal Size of Cubicles Door Size- 600X1790mm, Divider 1800mm height, Thickness of compat leminate 12mm, overall height of cubicle - 2000mm including bottom gap 150mm All accessories as per standared - Nylon black hardware and alluminium black profile. All items approved by Engineering Incharge.

Providing and fixing "Stone Kalasha" as per existing matching on doms od chattries/jharokhas as per existing design & dimensions as per traditional practices, fixing of kalash carefully without damaging the doms complete in all respect. Kalasha height.(exposed part) 90cm. to 100cm.

Please Enable Macros to View BoQ information