AEGCL/MD/Tech-765/AIIMS/2018/ SSandTL/IFB

Amount

The equipment shall be suitable for outdoor installation and shall meet the technical requirement as per specification for 132 kV, 50 Hz, 40 KA/1 Sec, Creepage as 25 mm/kV Power transformer

25 MVA, 132/33 kV, 3-Ph, YNyn0, Z =10 %, ONAN/ONAF with copper wound Power Transformer with OLTC (+5% to -15% in steps of 1.25%), RTCC panel including all cabling & 10% spare oil. The Transformer shall be suitable for single / Single ACSR Zebra Conductor termination on HV and Single ACSR Zebra conductor on LV side. The transformer shall be supplied with Bushing mounted CTs for WTI/OTI & REF protection. Ratios shall be as per SLD. The Transformer shall be suitable for outdoor installation & complete with all accessories to meet the technical specification.

250 kVA, 33/0.433 kV, Copper Wound, 3ph, Dyn-11, Z=4% outdoor type "Station Service Transformer" with OFF Circuit Tap Changer , - 5% to + 5 % in steps for 2.5 % & including 10 % spare oil. MV connection shall be through single ACSR Panther Conductor, LV Side shall be connected through XLPE Insulated LT cable.

132kV Equipment

145 kV, 3150 A, SCR 40 kA for 1 sec, SF6 Circuit Breaker, outdoor type, 3-Ph gang operated complete with operating mechanism & support structure with 10 % spare SF-6 gas.

145 KV, 1250 A, 40 kA for 1 sec, 3-Ph gang operated Horizontal Centre Break , outdoor type , motor operated Disconnector (Isolator) complete with mounting structure and solid core post Insulator

Without earth switch

With one earth switch(manual)

Without earth switch(manual) Tandem type

145 KV Outdoor type, live tank, single phase Current Transformer as per the details below. The CT shall meet the technical & other specifications as per design requirement.

a) Transformer feeder CTR : 200-400/1-1-1 A

b) Line & Bus Coupler CTR: 200-400/1-1-1 A

145 kV, 1-ph, Capacitor Voltage Transformer (CVT) for 132 kV Incoming Line (132 kV/√3/110/√3/110/√3V/110/√3V) as per technical specification.

145 kV, 1-ph, Potential Transformer (PT) on BUS (132kV/√3/110/√3/110/√3V110/√3V) as per the technical specification.

120 kV, 10 kA, Metal Oxide type, heavy duty, station class 3, Lightning Arrestor complete with Surge Counter & flexible copper connecting lead.

145kV BPI for Buswork

CT, CVT & PT JB complete with 30 Nos. Disconnecting type Terminals Blocks, complete with wiring.

Bay Marshalling Kiosk, made of 2.5 mm. thick sheet steel, protection class IP 55 complete with 250 TB

String Insulator Hardware for 132 kV

Single Tension Insulator assembly suitable for 11 kV, 90 kN Disc Insulator with all hardware accessories for Single ACSR Zebra conductor (without disc Insulator) with turn buckle.

Single Tension Insulator assembly suitable for 11 KV, 90 kN Disc Insulator with all hardware accessories for Single ACSR Zebra conductor (without disc Insulator) without turn buckle.

Single Suspension Insulator assembly suitable for 11 KV, 70 kN Disc Insulator with all hardware accessories for Single ACSR Zebra conductor for through type (without disc Insulator)

Single Suspension Insulator assembly suitable for 11 KV, 70 kN Disc Insulator with all hardware accessories for single ACSR Pantherconductor for through type (without disc Insulator).

Single Suspension Insulator assembly suitable for 11 KV, 70 kN Disc Insulator with all hardware accessories for single ACSR Pantherconductor for Drop type (without disc Insulator).

Single Tension Insulator assembly suitable for 11 KV, 90 kN Disc Insulator with all hardware accessories for single ACSR Pantherconductor (without disc Insulator) with turn buckle.

Single Tension Insulator assembly suitable for 11 KV, 90 kN Disc Insulator with all hardware accessories for single ACSR Pantherconductor (without disc Insulator) without turn buckle.

Single Suspension Insulator assembly suitable for 11 KV, 70 kN Disc Insulator with all hardwares accessories for Single ACSR Zebra conductor for Drop type

90 KN Disc Insulator, B & S Type for the String Insulator (Tension) with 5% spare

70 KN Disc Insulator (Suspension) with 5% spare

ACSR MOOSE conductor

Terminal connectors for 132 kV side.The Quantity of Terminal connectors shall be as per substation layout & shall be supplied as per technical specification against individual equipment requirement

Terminal connector for 145 kV Isolator to receive single ACSR PantherConductor.

Terminal connector for 145kV SF6 Circuit Breaker to receive single ACSR PantherConductor

Terminal connector for 145 kV Current Transformer terminal to receive single ACSR PantherConductor

Terminal connector for 145 kV CVT terminal to receive Single ACSR PantherConductor

Terminal connector for 145 kV Potential Transformer terminal to receive Single ACSR PantherConductor

Terminal connector for 145 kV BPI to receive single ACSR PantherConductor

Terminal connector for Wave-Trap to receive single ACSR PantherConductor

Terminal connector for 120 kV Lightning Arrester to receive Single ACSR PantherConductor

Transformer Bushing Connector (145 kV Side )

Spacer for Single ACSR Zebra with 250 mm sub conductor spacing, rigid

C-Wedge connector for Single ACSR Zebra

C-Wedge connector for single ACSR MOOSE

T- Type connector suitable for single ACSR Pantherthrough and same T-off

Shield Wire & Accessories

7/3.15 mm GSS wire for shielding

Tension Fittings for 7/3.15mm Earth wire

Earth Wire Connector (PG Clamps)

Cleat Clamp for clamping 7/3.15 mm GSS wire on to the Structure

Pad Clamp for clamping 7/3.15 mm GSS wire on to the Structure for earthing

1100 V grade, PVC Insulated, PVC sheathed, steel circular wire armoured, stranded control cables of the following sizes:

4 core 2.5 sq mm.

7 core 1.5 sq mm.

12 core 1.5 sq mm.

19 Core 1.5 sq mm.

33 kV Equipment The equipment shall be suitable for outdoor installation and shall meet the technical requirement as per specification for 33 kV , 50 Hz, 31. kA/3 Sec., Creepage as 25 mm / Kv

36 kV, 1250 A, SCR 31.5 KA/3sec, SF6, Outdoor type, 3-Ph gang operated complete with operating mechanism & support structure for Transformer Feeder.

36 kV, 1250 A, SCR 31.5 kA/ 3 sec , SF6, Outdoor type, 3-Ph gang operated complete with operating mechanism & support Structure for Outgoing Feeders.

36 KV, 1250 A, 3-Ph gang operated, outdoor type, double break centre post rotating outdoor type motor operated disconnector (Isolator) with mounting structure and solid core Post Insulator.

Without earth switch

With one earth switch

With two earth switch for Bus Section

36 kV out door type, live tank, single phase Current Transformer as given below. The CT shall meet the technical specification & other design requirements.

36 kV Transformer side CTR:1200-600 /1-1 -1A

36 kV outgoing Line Feeder CTR:400-200/1-1-1 A

Outdoor type 36 kV, 1-ph, Potential Transformer (PT) (33 kV/√3/110/√3/110/√3V) as per technical specification

30 kV,10 kA, Metal Oxide type, heavy duty, station class Lightning Arrestor complete with surge counter & copper connecting lead

33 kV, 8 kN Post Insulator (Bus works)

CT & PT JB complete with 30 nos disconnecting type terminal blocks, complete with wiring.

Terminal connectors 33 kV side. The quantity of terminal connectors shall be as per sub-station layout & shall be supplied as per technical specification of individual equipment requirement

Terminal Connector for 36 kV Isolator to receive Single ACSR Zebra conductor

Terminal Connector for 36 kV Isolator to receive Single ACSR Pantherconductor

Terminal Connector for 36 kV SF6 Circuit Breaker to receive Single ACSR Zebra conductor

Terminal Connector for 36 kV SF6 Circuit Breaker to receive Single ACSR Pantherconductor

Terminal Connector for 36 kV Current Transformer to receive Single ACSR Zebra conductor

Terminal Connector for 36 kV Current Transformer to receive Single ACSR Pantherconductor

Terminal Connector for 30 kV Lightning Arrester to receive Single ACSR Pantherconductor

Terminal Connector for 36 kV Potential Transformer connector to receive Single ACSR Pantherconductor

Transformer LV side Bushing Clamp (25 MVA Transformer)

Transformer MV side Bushing Clamp (250 kVA Transformer)

3 Inch IPS AL Tube for 33 kV Bus

Terminal connector for Bus PI suitable for 3 Inch IPS AL Tube

Terminal connector for Bus PI suitable for Single ACSR Zebra conductor

Terminal connector for Bus PI suitable for single ACSR Pantherconductor

Tee connector suitable for interconnection of Single ACSR Zebra conductor to Al tube.

Tee connector suitable for interconnection of Single ACSR Pantherconductor to Al tube.

Spacer for Single ACSR Zebra with 250 mm sub conductor spacing, rigid

Terminal connector for Bus PI suitable for single ACSR Pantherconductor

End Caps and couplers/bends for 3 Inch IPS AL Tube

Shield Wire Accessories

Lightning mast with spike (Tubular pole)

Control , Protection & Metering equipment

Control and Relay Panel

Indoor floor mounted, simplex type Control and Relay Panels, with mimic & annunciation panel for 132kV system as per specification comprising of the C & R Panels shall be complete with Numerical Relays and ABT Meters as per the Technical specifications & shall be compatible for SCADA/ SAS as open protocol.

132 kV Line Protection & control Panel

132/33 kV Transformer Protection & Control Panel

132 kV Bus Coupler Protection & Control Panel

Indoor floor mounted, simplex type control and relay panels, with mimic & annunciation panel with ABT Meters for 33kV system as per specification and data sheet comprising of :

33KV Line Protection & Control Panel

33KV Transformer I/C Protection & Control Panel on 33 k V side of Power Transformer

The control, metering & protection system shall be complete with Numerical relays & compatible for performing the functions as per the electrical specifications & shall be fully compatible with substation automation /SCADA.

PLCC Equipment

EPAX(8x24) with 24 nos. telephone, cable etc

Digital Protection Coupler with PLC Terminal (Duel Chanel)

LMU / LMDU

HF Coaxial Cable 75 ohms

132 kV, 800A wave trap for 40 kA for 1 sec. Wave trap will be CVT mounted.

Substation Automation

Sub-station Automation & SCADA system (as per the technical specification) along with Ethernet Switches, Gateways for Data Concentrator/ BCU , communication & data server, local work station with necessary accessories, hardware /software, fiber optic cabling & time synchronization equipment. Substation automation system of 132/33 kV substations including hardware for present bays (132 kV 4 Nos. bay , 33 kV 3 nos. bay,) and software (for present bays and 132 kV 4 nos. & 33 kV 2 nos. future bays) along with associated equipment for each bay The system shall be complete with Numerical Relay compatible with substation automation for 132 kV & 33 kV system. The numerical relays along with other measuring / indicating Instruments shall be part of the integrated SCADA system. The complete system of this substation shall be integrated on SCADA which shall be further the communicable to Master control center & further communicate to SLDC with Gateways.

Earthing and Lightning protection material

65 x 12 mm MS flat for Main Earth mat & Auxiliary Mat

75 x 12 mm GI Flat for Equipment Earthing like CT,CB, Isolator , LA, BPI & Tower Earthing, riser below ground etc. (3.53kg/m)

75 x 12 GI Flat for earthing of Transformer body

50 x 6 mm GI Flat for earthing of Marshalling Boxes, Panel, Junction boxes, Distribution Board, Battery Charger etc. (2.36kg/m)

50x6 mm MS flat for cable trench earthing.

50 x 6 mm Copper flat for earthing of Transformer Neutral on HV as well LV Side. (2.69kg/m)

40 mm Dia, 6.5 mtr long GI rod earth electrode (perforated) for earthing of LA, CVT, Lightning Mast, Shield Wire Transformer Neutral

40 mm Dia 6.5 mtr long GI. Rod Earth Electrode at corners of Main Earth Mat , Gate & control room Earthing

Lightning spikes for building which 100 mm dia GI Pipe, 1.5 mtr to be mounted on insulated base on building top and connected with 50x6 mm GI Flat.

50x6 mm GI flat for all building spikes

40 mm Dia 6.5 mtr long GI. Rod Earth Electrode for building spikes earthing

Electrolytic grade copper plate 600mmx600mmx6mm for Transformer Neutral earthing to be provided in 6.5 mtr deep earth pit to be filled with salt & charcoal (as per standard earthing Practices)(Power trafor and aux. trafo)

Note: The quantity of GI Flat/MS rod for earthing & lightning protection is approximate. The exact quantity to be arranged as per GFC drawing and as per site requirement

Lattice type Structural Steel (For Column and Beam types refer substation drawing.)

COLUMNS including nuts, bolts, spring washers and foundation bolts etc. complete.

Column Type ‘C1’

Column Type ‘C2’

Column Type ‘C5’

Column Type ‘C6’

Column Type ‘C7’

BEAMS including nuts, bolts, spring washers etc. complete.

Beam Type ‘B1’

Beam Type ‘B2’

Beam Type ‘B5’

Beam Type ‘B6’

Supply of Mounting structures of following equipment including nuts , bolts, spring washers and foundation bolts etc.(Refer substation layout drawing)

(i) 132 kV CVT

Current Transformers

(i) 132 kV, Line CT

(ii) 132 kV, BC CT

(iii) 132 kV, Transformer CT

(iv) 33 kV,Transformer CT

(v) 33 kV, Feeder CT

Voltage Transformer

Lightning Arrester

132 kV Lightning Arrester

33 kV Lightning Arrester

Post Insulator

Mounting structure for PI of 33kV Aluminium Tube bus ( Refer Substation layout drawing)

Cable and accessories

19/33 kV ( earthed system ) , 3Core 300 sqmm., AL Conductor, XLPE Insulated , PVC Sheathed, Armoured PVC Outer Sheath Cable for 33 kV outgoing feeder(200 meter/fedeer).

33 kV outdoor termination kit

LT Power Cable

AC Circuit 1.1 kV PVC Insulated 'PVC sheathed, GI wire / steel strip armoured, Aluminum/Copper Conductor cable of the following sizes:

Station transformer LV side to Main LVAC Board 3 1/2 core x 300 sq.mm AL (XLPE)cable from Station Transformer to LVAC Board

3 1/2 core x 150 Sqmm Al cable for oil filtration

3 1/2 core x 70 Sqmm Al cable for outdoor illumination & for battery charger

2 core x 16 Sqmm Cu cable for BMK, Trafo MB, fire panel & LDB

2 Core 6 Sqmm Cu cable for CT & CVT JB

4 Core 16 sqmm Al cable for panel illumination

4 Core 16 sqmm Al cable fo outdoor illumination JB

3 Core 2.5 sqmm CU cable fo outdoor illumination

DC Circuit

2 Core x 16 sqmm Cu cable for miscellaneous

Termination with double compression Gland and Al lugs for 3 ½ core x 400 sqmm. Al cable.

Termination with double compression Gland and lugs 3 1/2 core x 150 sqmm. Al. cable

Termination with double compression Gland and lugs 2 core x 16 sqmm. Cu. Cable

Termination with double compression Gland and lugs 3 1/2 core x 35 sqmm. Al. cable

Termination with double compression Gland and lugs for 2core x 6 sqmm. Cu cable

Termination with double compression Gland and lugs for 4core x 16 sqmm.. Cable

Termination with double compression Gland and lugs for 2core x 16 sqmm.Cu cable

Termination with double compression Gland and lugs for 2core x 35 sqmm.. Cu cable

Termination with double compression Gland and lugs for1 core x 70 sqmm.. Crucible

Termination with double compression Gland and lugs for 3 corex 2.5 sqmm.Cu cable

Cable Support & Cable Trays

Ladder type Cable Trays for outdoor

450 mm wide

300 mm wide

Perforated Cable Trays inside the Control Building

450 mm wide

300 mm wide

HDD/PVC pipe for laying cable from Trench to equipment

AC Distribution Board

AC 415 V, 500 A, 3-Ph cubicle type Indoor, floor mounted, auxiliary service board as per specification comprising of : LVAC Board will have 2 sections , each section will be fed from independent Aux. Transformer (250 KVA , 33/0.433 kV). Busbar rating 600 A, 25 kA for 1 sec, Copper, IP 54 , 2 mm COLD ROLLED / 3 MM HOT ROLLED a) 2 Nos. - Incomer feeders with 500 A TPN MCCB (Microprocessor base) b) 2 Nos. - Outgoing feeders with 160 A TPN MCCB (Microprocessor base) c) 1 No. - Outgoing feeders with 100 A TPN MCCB (Microprocessor base) d) 6 Nos. - Outgoing feeders with 63 A TPN MCCB e) 6 Nos. - Outgoing feeders with 32 A TPN MCCB f) 2 Nos. - Outgoing feeders with 16 A SP MCCB g) Each Incomer Shall Be Provided With 2 Core (for Metering & Protection )

DC Distribution Board ( 110 V DC & 48 VDC)

DC Distribution Board will have 2 sections; each section will be fed from independent Battery charger. Busbar rating 200 A for 110 V DC, 16 kA /for 1 SEC, AL or Copper, IP 54, 2 mm COLD ROLLED / 3 mm HOT ROLLED a) 1 no. incomer 100 A MCCB (Microprocessor base) b) 12 Nos. - Outgoing feeders with 32 A MCCB c) 2 Nos. - Outgoing feeders with 16 A MCCB

DC Distribution Board will have 2 sections, each section will be fed from independent Battery charger. Busbar rating 200 A for 48 V DC, 16 kA / for 1 SEC, AL or Copper, IP 54 , 2 mm COLD ROLLED / 3 mm HOT ROLLED a) 1 no. incomer feeder with 63 A MCCB b) 8 Nos. - Outgoing feeders with 16 A MCCB

Battery and Battery charger

Battery set ( 110 V DC )

110 V DC, 150 AH lead acid battery of VRLA type complete with accessories as per specification with 10% spare acid in non- returnable container (In tier arrangement).

Battery set ( 48 V DC )

48V DC, 150 AH lead acid battery of VRLA type complete with accessories as per specification with 10% spare acid in non- returnable container (In tier arrangement).

Battery charger (110 V DC)

Automatic float and float cum boost charger 60 A suitable for 110 V 150 AH VRLA battery & charger shall be as per specification

Battery charger (48 V DC)

Automatic float and float cum boost charger 50 A suitable for 48 V 150 AH VRLA battery & charger shall be as per specification

Fire fighting

NIFPS _ Nitrogen Injection Fire Fighting System System for Transformer

Fire Fighting equipment as per section-6 22.5 Kg capacity FE CO2 type, Trolley Mounted

25 Kg Capacity FE DCP type, Trolley Mounted

DCP 10 Kg Capacity, Wall mounted

FE CO2 6.5 Kg capacity, Wall mounted

DCP 5 Kg Capacity, Wall mounted

Foam Type 9 liter Capacity, Wall mounted

Water CO2 9 liter, Wall mounted

Fire Buckets (12 Nos. with stand in one set)

Outdoor illumination

LED flood light fitting with 250W led with all accessories control gear for Yard Lighting ( to be mounted on Gantry Tower )

LED flood light fitting with 250W led with all accessories control gear near boundary( to be mounted on 10 mtr. Pole)

LED street light fitting with 150W led with all accessories control gear on street ( to be mounted on 10 mtr. Pole)

70W LED lights post latern light mounted on 2.5 mtr. P-type pole

10 Mtr. MS Tubular poles 540SP-72

2.5 Mtr. P-type pole made of 100mm Dia GI Pipe

Lighting junction box for Light suitable for out door Installation comprising of 4 Nos. CBT M 4 type terminal connector for light connections Max size 150 x150x100mm

Measuring Instruments

Digital earth resistance meter

5 kV automated Insulation resistance meter

Earthing stick

Furniture a) 2 nos. of Executive Table :(1800 mm x 900 mm - Wooden) b) 3 nos. of Executive Chair:(Revolving mid back type) c) 6 Nos. of Visitor's Chair with hand rest d) Computer Room Executive Chair (Revolving mid back type) e) 2 nos. of Steel Almirah Length x Width x Height in mm (1016 x 560 x 1980) f) 1 Nos. of Recta work station of size 1200 mm x 600 mm, 25 mm thick work top with 3 drawer pedestal along with keyboard tray and CPU trolley and partitions of thickness 53 mm and of height 1200 mm.

Miscelleaneous

a) First Aid box b) Accident prevention chart c) Aluminum alloy ladder d) Safety belt e) Earthing stick f) PA, CCTV g) Substation Tools as per Clause 2.26.1 as per Bid Vol. 2

100 KVA, DG Set including Panel & Accessories

Mandatory Spares

For Transformers

HV Bushing

LV Bushing

Neutral Bushing

Complete set of gaskets for tank openings

Magnetic oil level gauge with low oil level alarm contacts

Oil temperature indicator with alarm and trip contacts and maximum reading pointer

Winding temperature indicator with alarm and trip contacts, contacts for cooling gears and maximum reading pointer

Silica gel Breather

Buchholz Relay

PRV for Main tank & OLTC

Oil surge Relay

For 132 KV & 33 kV SF6 Circuit Breakers

Interrupter

Tripping Coil

Closing Coil

Gas filling device for SF6 breakers

Control & relay panels

Over current relay

Earth fault relay

Distance protection relay

Differential relay

Master trip relay

For SAS

Ethernet switch

OFC cable 15m length with end termination equipment

Description of Work / Item(s)

Amount

The equipment shall be suitable for outdoor installation and shall meet the technical requirement as per specification for 132 kV, 50 Hz, 40 KA/1 Sec, Creepage as 25 mm/kV Power transformer

25 MVA, 132/33 kV, 3-Ph, YNyn0, Z =10 %, ONAN/ONAF with copper wound Power Transformer with OLTC (+5% to -15% in steps of 1.25%), RTCC panel including all cabling & 10% spare oil. The Transformer shall be suitable for single / Single ACSR Zebra Conductor termination on HV and Single ACSR Zebra conductor on LV side. The transformer shall be supplied with Bushing mounted CTs for WTI/OTI & REF protection. Ratios shall be as per SLD. The Transformer shall be suitable for outdoor installation & complete with all accessories to meet the technical specification.

250 kVA, 33/0.433 kV, Copper Wound, 3ph, Dyn-11, Z=4% outdoor type "Station Service Transformer" with OFF Circuit Tap Changer , - 5% to + 5 % in steps for 2.5 % & including 10 % spare oil. MV connection shall be through single ACSR Panther Conductor, LV Side shall be connected through XLPE Insulated LT cable.

132kV Equipment

145 kV, 3150 A, SCR 40 kA for 1 sec, SF6 Circuit Breaker, outdoor type, 3-Ph gang operated complete with operating mechanism & support structure with 10 % spare SF-6 gas.

145 KV, 1250 A, 40 kA for 1 sec, 3-Ph gang operated Horizontal Centre Break , outdoor type , motor operated Disconnector (Isolator) complete with mounting structure and solid core post Insulator

Without earth switch

With one earth switch(manual)

Without earth switch(manual) Tandem type

145 KV Outdoor type, live tank, single phase Current Transformer as per the details below. The CT shall meet the technical & other specifications as per design requirement.

a) Transformer feeder CTR : 200-400/1-1-1 A

b) Line & Bus Coupler CTR: 200-400/1-1-1 A

145 kV, 1-ph, Capacitor Voltage Transformer (CVT) for 132 kV Incoming Line (132 kV/√3/110/√3/110/√3V/110/√3V) as per technical specification.

145 kV, 1-ph, Potential Transformer (PT) on BUS (132kV/√3/110/√3/110/√3V110/√3V) as per the technical specification.

120 kV, 10 kA, Metal Oxide type, heavy duty, station class 3, Lightning Arrestor complete with Surge Counter & flexible copper connecting lead.

145kV BPI for Buswork

CT, CVT & PT JB complete with 30 Nos. Disconnecting type Terminals Blocks, complete with wiring.

Bay Marshalling Kiosk, made of 2.5 mm. thick sheet steel, protection class IP 55 complete with 250 TB

String Insulator Hardware for 132 kV

Single Tension Insulator assembly suitable for 11 kV, 90 kN Disc Insulator with all hardware accessories for Single ACSR Zebra conductor (without disc Insulator) with turn buckle.

Single Tension Insulator assembly suitable for 11 KV, 90 kN Disc Insulator with all hardware accessories for Single ACSR Zebra conductor (without disc Insulator) without turn buckle.

Single Suspension Insulator assembly suitable for 11 KV, 70 kN Disc Insulator with all hardware accessories for Single ACSR Zebra conductor for through type (without disc Insulator)

Single Suspension Insulator assembly suitable for 11 KV, 70 kN Disc Insulator with all hardware accessories for single ACSR Pantherconductor for through type (without disc Insulator).

Single Suspension Insulator assembly suitable for 11 KV, 70 kN Disc Insulator with all hardware accessories for single ACSR Pantherconductor for Drop type (without disc Insulator).

Single Tension Insulator assembly suitable for 11 KV, 90 kN Disc Insulator with all hardware accessories for single ACSR Pantherconductor (without disc Insulator) with turn buckle.

Single Tension Insulator assembly suitable for 11 KV, 90 kN Disc Insulator with all hardware accessories for single ACSR Pantherconductor (without disc Insulator) without turn buckle.

Single Suspension Insulator assembly suitable for 11 KV, 70 kN Disc Insulator with all hardwares accessories for Single ACSR Zebra conductor for Drop type

90 KN Disc Insulator, B & S Type for the String Insulator (Tension) with 5% spare

70 KN Disc Insulator (Suspension) with 5% spare

ACSR MOOSE conductor

Terminal connectors for 132 kV side.The Quantity of Terminal connectors shall be as per substation layout & shall be supplied as per technical specification against individual equipment requirement

Terminal connector for 145 kV Isolator to receive single ACSR PantherConductor.

Terminal connector for 145kV SF6 Circuit Breaker to receive single ACSR PantherConductor

Terminal connector for 145 kV Current Transformer terminal to receive single ACSR PantherConductor

Terminal connector for 145 kV CVT terminal to receive Single ACSR PantherConductor

Terminal connector for 145 kV Potential Transformer terminal to receive Single ACSR PantherConductor

Terminal connector for 145 kV BPI to receive single ACSR PantherConductor

Terminal connector for Wave-Trap to receive single ACSR PantherConductor

Terminal connector for 120 kV Lightning Arrester to receive Single ACSR PantherConductor

Transformer Bushing Connector (145 kV Side )

Spacer for Single ACSR Zebra with 250 mm sub conductor spacing, rigid

C-Wedge connector for Single ACSR Zebra

C-Wedge connector for single ACSR MOOSE

T- Type connector suitable for single ACSR Pantherthrough and same T-off

Shield Wire & Accessories

7/3.15 mm GSS wire for shielding

Tension Fittings for 7/3.15mm Earth wire

Earth Wire Connector (PG Clamps)

Cleat Clamp for clamping 7/3.15 mm GSS wire on to the Structure

Pad Clamp for clamping 7/3.15 mm GSS wire on to the Structure for earthing

1100 V grade, PVC Insulated, PVC sheathed, steel circular wire armoured, stranded control cables of the following sizes:

4 core 2.5 sq mm.

7 core 1.5 sq mm.

12 core 1.5 sq mm.

19 Core 1.5 sq mm.

33 kV Equipment The equipment shall be suitable for outdoor installation and shall meet the technical requirement as per specification for 33 kV , 50 Hz, 31. kA/3 Sec., Creepage as 25 mm / Kv

36 kV, 1250 A, SCR 31.5 KA/3sec, SF6, Outdoor type, 3-Ph gang operated complete with operating mechanism & support structure for Transformer Feeder.

36 kV, 1250 A, SCR 31.5 kA/ 3 sec , SF6, Outdoor type, 3-Ph gang operated complete with operating mechanism & support Structure for Outgoing Feeders.

36 KV, 1250 A, 3-Ph gang operated, outdoor type, double break centre post rotating outdoor type motor operated disconnector (Isolator) with mounting structure and solid core Post Insulator.

Without earth switch

With one earth switch

With two earth switch for Bus Section

36 kV out door type, live tank, single phase Current Transformer as given below. The CT shall meet the technical specification & other design requirements.

36 kV Transformer side CTR:1200-600 /1-1 -1A

36 kV outgoing Line Feeder CTR:400-200/1-1-1 A

Outdoor type 36 kV, 1-ph, Potential Transformer (PT) (33 kV/√3/110/√3/110/√3V) as per technical specification

30 kV,10 kA, Metal Oxide type, heavy duty, station class Lightning Arrestor complete with surge counter & copper connecting lead

33 kV, 8 kN Post Insulator (Bus works)

CT & PT JB complete with 30 nos disconnecting type terminal blocks, complete with wiring.

Terminal connectors 33 kV side. The quantity of terminal connectors shall be as per sub-station layout & shall be supplied as per technical specification of individual equipment requirement

Terminal Connector for 36 kV Isolator to receive Single ACSR Zebra conductor

Terminal Connector for 36 kV Isolator to receive Single ACSR Pantherconductor

Terminal Connector for 36 kV SF6 Circuit Breaker to receive Single ACSR Zebra conductor

Terminal Connector for 36 kV SF6 Circuit Breaker to receive Single ACSR Pantherconductor

Terminal Connector for 36 kV Current Transformer to receive Single ACSR Zebra conductor

Terminal Connector for 36 kV Current Transformer to receive Single ACSR Pantherconductor

Terminal Connector for 30 kV Lightning Arrester to receive Single ACSR Pantherconductor

Terminal Connector for 36 kV Potential Transformer connector to receive Single ACSR Pantherconductor

Transformer LV side Bushing Clamp (25 MVA Transformer)

Transformer MV side Bushing Clamp (250 kVA Transformer)

3 Inch IPS AL Tube for 33 kV Bus

Terminal connector for Bus PI suitable for 3 Inch IPS AL Tube

Terminal connector for Bus PI suitable for Single ACSR Zebra conductor

Terminal connector for Bus PI suitable for single ACSR Pantherconductor

Tee connector suitable for interconnection of Single ACSR Zebra conductor to Al tube.

Tee connector suitable for interconnection of Single ACSR Pantherconductor to Al tube.

Spacer for Single ACSR Zebra with 250 mm sub conductor spacing, rigid

Terminal connector for Bus PI suitable for single ACSR Pantherconductor

End Caps and couplers/bends for 3 Inch IPS AL Tube

Shield Wire Accessories

Lightning mast with spike (Tubular pole)

Control , Protection & Metering equipment

Control and Relay Panel

Indoor floor mounted, simplex type Control and Relay Panels, with mimic & annunciation panel for 132kV system as per specification comprising of the C & R Panels shall be complete with Numerical Relays and ABT Meters as per the Technical specifications & shall be compatible for SCADA/ SAS as open protocol.

132 kV Line Protection & control Panel

132/33 kV Transformer Protection & Control Panel

132 kV Bus Coupler Protection & Control Panel

Indoor floor mounted, simplex type control and relay panels, with mimic & annunciation panel with ABT Meters for 33kV system as per specification and data sheet comprising of :

33KV Line Protection & Control Panel

33KV Transformer I/C Protection & Control Panel on 33 k V side of Power Transformer

The control, metering & protection system shall be complete with Numerical relays & compatible for performing the functions as per the electrical specifications & shall be fully compatible with substation automation /SCADA.

PLCC Equipment

EPAX(8x24) with 24 nos. telephone, cable etc

Digital Protection Coupler with PLC Terminal (Duel Chanel)

LMU / LMDU

HF Coaxial Cable 75 ohms

132 kV, 800A wave trap for 40 kA for 1 sec. Wave trap will be CVT mounted.

Substation Automation

Sub-station Automation & SCADA system (as per the technical specification) along with Ethernet Switches, Gateways for Data Concentrator/ BCU , communication & data server, local work station with necessary accessories, hardware /software, fiber optic cabling & time synchronization equipment. Substation automation system of 132/33 kV substations including hardware for present bays (132 kV 4 Nos. bay , 33 kV 3 nos. bay,) and software (for present bays and 132 kV 4 nos. & 33 kV 2 nos. future bays) along with associated equipment for each bay The system shall be complete with Numerical Relay compatible with substation automation for 132 kV & 33 kV system. The numerical relays along with other measuring / indicating Instruments shall be part of the integrated SCADA system. The complete system of this substation shall be integrated on SCADA which shall be further the communicable to Master control center & further communicate to SLDC with Gateways.

Earthing and Lightning protection material

65 x 12 mm MS flat for Main Earth mat & Auxiliary Mat

75 x 12 mm GI Flat for Equipment Earthing like CT,CB, Isolator , LA, BPI & Tower Earthing, riser below ground etc. (3.53kg/m)

75 x 12 GI Flat for earthing of Transformer body

50 x 6 mm GI Flat for earthing of Marshalling Boxes, Panel, Junction boxes, Distribution Board, Battery Charger etc. (2.36kg/m)

50x6 mm MS flat for cable trench earthing.

50 x 6 mm Copper flat for earthing of Transformer Neutral on HV as well LV Side. (2.69kg/m)

40 mm Dia, 6.5 mtr long GI rod earth electrode (perforated) for earthing of LA, CVT, Lightning Mast, Shield Wire Transformer Neutral

40 mm Dia 6.5 mtr long GI. Rod Earth Electrode at corners of Main Earth Mat , Gate & control room Earthing

Lightning spikes for building which 100 mm dia GI Pipe, 1.5 mtr to be mounted on insulated base on building top and connected with 50x6 mm GI Flat.

50x6 mm GI flat for all building spikes

40 mm Dia 6.5 mtr long GI. Rod Earth Electrode for building spikes earthing

Electrolytic grade copper plate 600mmx600mmx6mm for Transformer Neutral earthing to be provided in 6.5 mtr deep earth pit to be filled with salt & charcoal (as per standard earthing Practices)(Power trafor and aux. trafo)

Note: The quantity of GI Flat/MS rod for earthing & lightning protection is approximate. The exact quantity to be arranged as per GFC drawing and as per site requirement

Lattice type Structural Steel (For Column and Beam types refer substation drawing.)

COLUMNS including nuts, bolts, spring washers and foundation bolts etc. complete.

Column Type ‘C1’

Column Type ‘C2’

Column Type ‘C5’

Column Type ‘C6’

Column Type ‘C7’

BEAMS including nuts, bolts, spring washers etc. complete.

Beam Type ‘B1’

Beam Type ‘B2’

Beam Type ‘B5’

Beam Type ‘B6’

Supply of Mounting structures of following equipment including nuts , bolts, spring washers and foundation bolts etc.(Refer substation layout drawing)

(i) 132 kV CVT

Current Transformers

(i) 132 kV, Line CT

(ii) 132 kV, BC CT

(iii) 132 kV, Transformer CT

(iv) 33 kV,Transformer CT

(v) 33 kV, Feeder CT

Voltage Transformer

Lightning Arrester

132 kV Lightning Arrester

33 kV Lightning Arrester

Post Insulator

Mounting structure for PI of 33kV Aluminium Tube bus ( Refer Substation layout drawing)

Cable and accessories

19/33 kV ( earthed system ) , 3Core 300 sqmm., AL Conductor, XLPE Insulated , PVC Sheathed, Armoured PVC Outer Sheath Cable for 33 kV outgoing feeder(200 meter/fedeer).

33 kV outdoor termination kit

LT Power Cable

AC Circuit 1.1 kV PVC Insulated 'PVC sheathed, GI wire / steel strip armoured, Aluminum/Copper Conductor cable of the following sizes:

Station transformer LV side to Main LVAC Board 3 1/2 core x 300 sq.mm AL (XLPE)cable from Station Transformer to LVAC Board

3 1/2 core x 150 Sqmm Al cable for oil filtration

3 1/2 core x 70 Sqmm Al cable for outdoor illumination & for battery charger

2 core x 16 Sqmm Cu cable for BMK, Trafo MB, fire panel & LDB

2 Core 6 Sqmm Cu cable for CT & CVT JB

4 Core 16 sqmm Al cable for panel illumination

4 Core 16 sqmm Al cable fo outdoor illumination JB

3 Core 2.5 sqmm CU cable fo outdoor illumination

DC Circuit

2 Core x 16 sqmm Cu cable for miscellaneous

Termination with double compression Gland and Al lugs for 3 ½ core x 400 sqmm. Al cable.

Termination with double compression Gland and lugs 3 1/2 core x 150 sqmm. Al. cable

Termination with double compression Gland and lugs 2 core x 16 sqmm. Cu. Cable

Termination with double compression Gland and lugs 3 1/2 core x 35 sqmm. Al. cable

Termination with double compression Gland and lugs for 2core x 6 sqmm. Cu cable

Termination with double compression Gland and lugs for 4core x 16 sqmm.. Cable

Termination with double compression Gland and lugs for 2core x 16 sqmm.Cu cable

Termination with double compression Gland and lugs for 2core x 35 sqmm.. Cu cable

Termination with double compression Gland and lugs for1 core x 70 sqmm.. Crucible

Termination with double compression Gland and lugs for 3 corex 2.5 sqmm.Cu cable

Cable Support & Cable Trays

Ladder type Cable Trays for outdoor

450 mm wide

300 mm wide

Perforated Cable Trays inside the Control Building

450 mm wide

300 mm wide

HDD/PVC pipe for laying cable from Trench to equipment

AC Distribution Board

AC 415 V, 500 A, 3-Ph cubicle type Indoor, floor mounted, auxiliary service board as per specification comprising of : LVAC Board will have 2 sections , each section will be fed from independent Aux. Transformer (250 KVA , 33/0.433 kV). Busbar rating 600 A, 25 kA for 1 sec, Copper, IP 54 , 2 mm COLD ROLLED / 3 MM HOT ROLLED a) 2 Nos. - Incomer feeders with 500 A TPN MCCB (Microprocessor base) b) 2 Nos. - Outgoing feeders with 160 A TPN MCCB (Microprocessor base) c) 1 No. - Outgoing feeders with 100 A TPN MCCB (Microprocessor base) d) 6 Nos. - Outgoing feeders with 63 A TPN MCCB e) 6 Nos. - Outgoing feeders with 32 A TPN MCCB f) 2 Nos. - Outgoing feeders with 16 A SP MCCB g) Each Incomer Shall Be Provided With 2 Core (for Metering & Protection )

DC Distribution Board ( 110 V DC & 48 VDC)

DC Distribution Board will have 2 sections; each section will be fed from independent Battery charger. Busbar rating 200 A for 110 V DC, 16 kA /for 1 SEC, AL or Copper, IP 54, 2 mm COLD ROLLED / 3 mm HOT ROLLED a) 1 no. incomer 100 A MCCB (Microprocessor base) b) 12 Nos. - Outgoing feeders with 32 A MCCB c) 2 Nos. - Outgoing feeders with 16 A MCCB

DC Distribution Board will have 2 sections, each section will be fed from independent Battery charger. Busbar rating 200 A for 48 V DC, 16 kA / for 1 SEC, AL or Copper, IP 54 , 2 mm COLD ROLLED / 3 mm HOT ROLLED a) 1 no. incomer feeder with 63 A MCCB b) 8 Nos. - Outgoing feeders with 16 A MCCB

Battery and Battery charger

Battery set ( 110 V DC )

110 V DC, 150 AH lead acid battery of VRLA type complete with accessories as per specification with 10% spare acid in non- returnable container (In tier arrangement).

Battery set ( 48 V DC )

48V DC, 150 AH lead acid battery of VRLA type complete with accessories as per specification with 10% spare acid in non- returnable container (In tier arrangement).

Battery charger (110 V DC)

Automatic float and float cum boost charger 60 A suitable for 110 V 150 AH VRLA battery & charger shall be as per specification

Battery charger (48 V DC)

Automatic float and float cum boost charger 50 A suitable for 48 V 150 AH VRLA battery & charger shall be as per specification

Fire fighting

NIFPS _ Nitrogen Injection Fire Fighting System System for Transformer

Fire Fighting equipment as per section-6 22.5 Kg capacity FE CO2 type, Trolley Mounted

25 Kg Capacity FE DCP type, Trolley Mounted

DCP 10 Kg Capacity, Wall mounted

FE CO2 6.5 Kg capacity, Wall mounted

DCP 5 Kg Capacity, Wall mounted

Foam Type 9 liter Capacity, Wall mounted

Water CO2 9 liter, Wall mounted

Fire Buckets (12 Nos. with stand in one set)

Outdoor illumination

LED flood light fitting with 250W led with all accessories control gear for Yard Lighting ( to be mounted on Gantry Tower )

LED flood light fitting with 250W led with all accessories control gear near boundary( to be mounted on 10 mtr. Pole)

LED street light fitting with 150W led with all accessories control gear on street ( to be mounted on 10 mtr. Pole)

70W LED lights post latern light mounted on 2.5 mtr. P-type pole

10 Mtr. MS Tubular poles 540SP-72

2.5 Mtr. P-type pole made of 100mm Dia GI Pipe

Lighting junction box for Light suitable for out door Installation comprising of 4 Nos. CBT M 4 type terminal connector for light connections Max size 150 x150x100mm

Measuring Instruments

Digital earth resistance meter

5 kV automated Insulation resistance meter

Earthing stick

Furniture a) 2 nos. of Executive Table :(1800 mm x 900 mm - Wooden) b) 3 nos. of Executive Chair:(Revolving mid back type) c) 6 Nos. of Visitor's Chair with hand rest d) Computer Room Executive Chair (Revolving mid back type) e) 2 nos. of Steel Almirah Length x Width x Height in mm (1016 x 560 x 1980) f) 1 Nos. of Recta work station of size 1200 mm x 600 mm, 25 mm thick work top with 3 drawer pedestal along with keyboard tray and CPU trolley and partitions of thickness 53 mm and of height 1200 mm.

Miscelleaneous

a) First Aid box b) Accident prevention chart c) Aluminum alloy ladder d) Safety belt e) Earthing stick f) PA, CCTV g) Substation Tools as per Clause 2.26.1 as per Bid Vol. 2

100 KVA, DG Set including Panel & Accessories

Mandatory Spares

For Transformers

HV Bushing

LV Bushing

Neutral Bushing

Complete set of gaskets for tank openings

Magnetic oil level gauge with low oil level alarm contacts

Oil temperature indicator with alarm and trip contacts and maximum reading pointer

Winding temperature indicator with alarm and trip contacts, contacts for cooling gears and maximum reading pointer

Silica gel Breather

Buchholz Relay

PRV for Main tank & OLTC

Oil surge Relay

For 132 KV & 33 kV SF6 Circuit Breakers

Interrupter

Tripping Coil

Closing Coil

Gas filling device for SF6 breakers

Control & relay panels

Over current relay

Earth fault relay

Distance protection relay

Differential relay

Master trip relay

For SAS

Ethernet switch

OFC cable 15m length with end termination equipment

Description of Work / Item(s)

Amount

ETC of Power transformer

Erection , testing and commissioninig of 25 MVA, 132/33 kV, 3-Ph, YNyn0, Z =10 %, ONAN/ONAF with copper wound Power Transformer with OLTC (+5% to -15% in steps of 1.25%), RTCC panel including laying & terminating of LT power and control cables as required. The Transformer shall be suitable for single / Single ACSR Zebra Conductor termination on HV and Single ACSR Zebra conductor on LV side. The transformer shall be supplied with Bushing mounted CTs for WTI/OTI & REF protection. Ratios shall be as per SLD. The Transformer shall be suitable for outdoor installation & complete with all accessories to meet the technical specification.

Construction of Transformer pad for above including supply of all foundation materials & Labour as per drawing furnished with the bid document

Erection , testing and commissioning of 250 kVA, 33/0.433 kV, Copper Wound, 3ph, Dyn-11, Z=4% outdoor type "Station Service Transformer" with OFF Circuit Tap Changer , - 5% to + 5 % in steps for 2.5 % & including 10 % spare oilincluding construction of foundations and supply of all foundation materials.. MV connection shall be through single ACSR Panther Conductor, LV Side shall be connected through XLPE Insulated LT cable.

ETC of 132kV Equipment

Erection , testing and commissioning of 145 kV, 3150 A, SCR 40 kA for 1 sec, SF6 Circuit Breaker, outdoor type, 3-Ph gang operated complete with operating mechanism & support structure including construction of foundations and supply of all foundation materials and laying & terminating of LT power and control cables as required..

Erection , testing and commissioning of 145 KV, 1250 A, 40 kA for 1 sec, 3-Ph gang operated Horizontal Centre Break , outdoor type , motor operated Disconnector (Isolator) complete withpost Insulatorincluding mounting structure and construction of foundations and supply of all foundation materials and laying & terminating of LT power and control cables as required.

Without earth switch

With one earth switch (manual)

Without earth switch (manual) Tandem type

Erection , testing and commissioning of 145 KV Outdoor type, live tank, single phase Current Transformer including construction of foundations and supply of all foundation materials..complete in all respect. and laying & terminating of LT power and control cables as required

Transformer feeder CTR : 200-400/1-1-1 A

Line & Bus Coupler CTR: 200-400/1-1-1 A

Erection , testing and commissioning of 145 kV, 1-ph, Capacitor Voltage Transformer (CVT) for 132 kV Incoming Line (132 kV/√3/110/√3/110/√3V/110/√3V) including construction of foundations and supply of all foundation materials..complete. in all respectand laying & terminating of LT power and control cables as required

Erection , testing and commissioning of 145 kV, 1-ph, Potential Transformer (PT) on BUS (132 kV/√3/110/√3/110/√3V/110/√3V) including construction of foundations and supply of all foundation materials.complete.in all respect.and laying& terminating of LT power and control cables as required

Erection , testing and commissioning of 120 kV, 10 kA, Metal Oxide type, heavy duty, station class 3, Lightning Arrestor complete with Surge Counter & flexible copper connecting leadincluding construction of foundations and supply of all foundation materials..complete in all respect. and laying & terminating of LT power and control cables as required

Erection , testing and commissioning of 145 kV BPI for Busworkincluding construction of foundations and supply of all foundation materials.complete

Commissioning of Bay Marshalling Kiosk, made of 2.5 mm. thick steel sheet, protection class IP 55 complete with 250 TBand laying & terminating of LT power and control cables as required

ETC of String Insulator Hardware for 132 kV

Single Tension Insulator assembly suitable for 11 kV, 90 kN Disc Insulator with all hardware accessories for Single ACSR Zebra conductor (without disc Insulator) with turn buckle.

Single Tension Insulator assembly suitable for 11 KV, 90 kN Disc Insulator with all hardware accessories for Single ACSR Zebra conductor (without disc Insulator) without turn buckle.

Single Suspension Insulator assembly suitable for 11 KV, 70 kN Disc Insulator with all hardware accessories for Single ACSR Zebra conductorfor through type (without disc Insulator)

Single Suspension Insulator assembly suitable for 11 KV, 70 kN Disc Insulator with all hardware accessories for single ACSR Pantherconductor for through type (without disc Insulator).

Single Suspension Insulator assembly suitable for 11 KV, 70 kN Disc Insulator with all hardware accessories for single ACSR Pantherconductor for Drop type (without disc Insulator).

Single Tension Insulator assembly suitable for 11 KV, 90 kN Disc Insulator with all hardware accessories for single ACSR Pantherconductor (without disc Insulator) with turn buckle.

Single Tension Insulator assembly suitable for 11 KV, 90 kN Disc Insulator with all hardware accessories for single ACSR Pantherconductor (without disc Insulator) without turn buckle.

Single Suspension Insulator assembly suitable for 11 KV, 70 kN Disc Insulator with all hardwares accessories for Single ACSR Zebra conductor for Drop type

90 KN Disc Insulator, B & S Type for the String Insulator (Tension) with 5% spare

70 KN Disc Insulator (Suspension) with 5% spare

ACSR ZEBRA conductor

ACSR PANTHER conductor

Erection of Terminal connectors for 132 kV side.The Quantity of Terminal connectors shall be as per substation layout & shall be supplied as per technical specification against individual equipment requirement

Terminal connector for 145 kV Isolator to receive single ACSR PantherConductor.

Terminal connector for 145kV SF6 Circuit Breaker to receive single ACSR PantherConductor

Terminal connector for 145 kV Current Transformer terminal to receive single ACSR PantherConductor

Terminal connector for 145 kV CVT terminal to receive Single ACSR PantherConductor

Terminal connector for 145 kV Potential Transformer terminal to receive Single ACSR PantherConductor

Terminal connector for 145 kV BPI to receive single ACSR PantherConductor

Terminal connector for Wave-Trap to receive single ACSR PantherConductor

Terminal connector for 120 kV Lightning Arrester to receive Single ACSR PantherConductor

Transformer Bushing Connector (145 kV Side )

Spacer for Single ACSR Zebra with 250 mm sub conductor spacing, rigid

C-Wedge connector for Single ACSR Zebra

C-Wedge connector for single ACSR MOOSE

T- Type connector suitable for single ACSR Pantherthrough and same T-off

ETC of Shield Wire & Accessories

7/3.15 mm GSS wire for shielding

Tension Fittings for 7/3.15mm Earth wire

Earth Wire Connector (PG Clamps)

Cleat Clamp for clamping 7/3.15 mm GSS wire on to the Structure

Pad Clamp for clamping 7/3.15 mm GSS wire on to the Structure for earthing

ETC of 33 kV Equipment The equipment shall be suitable for outdoor installation and shall meet the technical requirement as per specification for 33 kV , 50 Hz, 31. kA/3 Sec., Creepage as 25 mm / Kv

Erection, testing and commissioning of 36 kV, 1250 A, SCR 31.5 KA/3sec, SF6, Outdoor type, 3-Ph gang operated complete with operating mechanism & support structure for Transformer Feeder & Bus couplerincluding construction of foundations and supply of all foundation materials. and laying & terminating of LT power and control cables as required

Erection, testing and commissioning of 36 kV, 1250 A, SCR 31.5 kA/ 3 sec , SF6, Outdoor type, 3-Ph gang operated complete with operating mechanism & support Structure for Outgoing Feedersincluding construction of foundations and supply of all foundation materials and laying & terminating of LT power and control cables as required

Erection , testing commissioning of 36 KV, 1250 A, 3-Ph gang operated, outdoor type, double break centre post rotating outdoor type motor operated disconnector (Isolator) with solid core Post Insulatorincluding construction of foundations and supply of all foundation materials and laying & terminating of LT power and control cables as required..

Without earth switch

With one earthswitch

With two earth switch

Erection , testing and commissioning of 36 kV out door type, live tank, single phase Current Transformer as given below. The CT shall meet the technical specification & other design requirementsincluding construction of foundations and supply of all foundation materials and laying & terminating of LT power and control cables as required.

36 kV Transformer side CTR:1200-600 /1-1 A

36 kV outgoing Line Feeder CTR:400-200/1-1 A

Erection, testing and commissioning ofOutdoor type 36 kV, 1-ph, Potential Transformer (PT) (33 kV/√3/110/√3/110/√3V) as per technical specificationincluding construction of foundations and supply of all foundation materials and laying & terminating of LT power and control cables as required.

Erection, testing and commissioning of 30 kV,10 kA, Metal Oxide type, heavy duty, station class Lightning Arrestor complete with surge counter & copper connecting leadincluding construction of foundations and supply of all foundation materials and laying & terminating of LT power and control cables as required

a) 33 kV, 8 kN Post Insulator (Bus works)

Bay Marshalling Kiosk, made of 2.5 mm. thick steel sheet, protection class IP 55 complete with 200 TB. and laying & terminating of LT power and control cablesas required

Erection of Terminal connectors 33 kV side. The quantity of terminal connectors shall be as per sub-station layout & shall be supplied as per technical specification of individual equipment requirement

Terminal Connector for 36 kV Isolator to receive Single ACSR Zebra conductor

Terminal Connector for 36 kV Isolator to receive Single ACSR Pantherconductor

Terminal Connector for 36 kV SF6 Circuit Breaker to receive Single ACSR Zebra conductor

Terminal Connector for 36 kV SF6 Circuit Breaker to receive Single ACSR Pantherconductor

Terminal Connector for 36 kV Current Transformer to receive Single ACSR Zebra conductor

Terminal Connector for 36 kV Current Transformer to receive Single ACSR Pantherconductor

Terminal Connector for 30 kV Lightning Arrester to receive Single ACSR Pantherconductor

Terminal Connector for 36 kV Potential Transformer connector to receive Single ACSR Pantherconductor

Transformer LV side Bushing Clamp (25 MVA Transformer)

Transformer MV side Bushing Clamp (250 kVA Transformer)

3 Inch IPS AL Tube for 33 kV Bus

Terminal connector for Bus PI suitable for 3 Inch IPS AL Tube

Terminal connector for Bus PI suitable for Single ACSR Zebra conductor

Terminal connector for Bus PI suitable for single ACSR Pantherconductor

Tee connector suitable for interconnection of Single ACSR Zebra conductor to Al tube.

Tee connector suitable for interconnection of Single ACSR Pantherconductor to Al tube.

Spacer for Single ACSR Zebra with 250 mm sub conductor spacing, rigid

Terminal connector for Bus PI suitable for single ACSR Pantherconductor

End Caps and couplers/bends for 3 Inch IPS AL Tube

ETC of Shield Wire Accessories

Lightning mast with spike (Tubular pole)

ETC of Control , Protection & Metering equipment

Control and Relay Panel

Indoor floor mounted, simplex type Control and Relay Panels, with mimic & annunciation panel for 132kV system as per specification comprising of the C & R Panels shall be complete with Numerical Relays and ABT Meters as per the Technical specifications & shall be compatible for SCADA/ SAS as open protocol and laying & terminating of LT power and control cables as required

132 kV Line Protection & control Panel

132/33 kV Transformer Protection & Control Panel

132 kV Bus Coupler Protection & Control Panel

Indoor floor mounted, simplex type control and relay panels, with mimic & annunciation panel with ABT Meters for 33kV system as per specification and laying & terminating of LT power and control cables as required

33KV Line Protection & Control Panel

33KV Protection & Control Panel for Bus Section The control, metering & protection system shall be complete with Numerical relays & compatible for performing the functions as per the electrical specifications & shall be fully compatible with substation automation /SCADA.

ETC of PLCC Equipment

EPAX(8x24) with 24 nos. telephone, cable etc

Digital Protection Coupler with PLC Terminal (Duel Channel)

LMU / LMDU

HF Cable 75 ohms(balanced)

132 kV, 800A wave trap for 40 kA for 1 sec. Wave trap will be CVT mounted.

ETC of Substation Automation

Sub-station Automation & SCADA system (as per the technical specification) along with Ethernet Switches, Gateways for Data Concentrator/ BCU , communication & data server, local work station with necessary accessories, hardware /software, fiber optic cabling & time synchronization equipment. Substation automation system of 132/33 kV substations including hardware for present bays (132 kV 4 Nos. bay , 33 kV 3 nos. bay,) and software (for present bays and 132 kV 4 nos. & 33 kV 2 nos. future bays) along with associated equipment for each bay The system shall be complete with Numerical Relay compatible with substation automation for 132 kV & 33 kV system. The numerical relays along with other measuring / indicating Instruments shall be part of the integrated SCADA system. The complete system of this substation shall be integrated on SCADA which shall be further the communicable to Master control center & further communicate to SLDC with Gateways.

ETC of Earthing and Lightning protection material

65 x 12 mm MS flat for Main Earth Mat & Auxiliary Mat

75 x 12 mm GI Flat for Equipment Earthing like CT,CB, Isolator , LA, BPI & Tower Earthing, riser below ground etc. (3.53 kg/m)

75 x 12 GI Flat for earthing of Transformer body

50 x 6 mm GI Flat for earthing of Marshalling Boxes, Panel, Junction boxes, Distribution Board, Battery Charger etc. (2.36 kg/m)

50x6 mm MS flat for cable trench earthing.

50 x 6 mm Copper flat for earthing of Transformer Neutral on HV as well LV Side. (2.69 kg/m)

40 mm Dia, 3 mtr long GI Rod Earth Electrode (perforated) for earthing of LA, CVT, Lightning Mast, Shield Wire Transformer Neutral

40 mm Dia 3 mtr long GI. Rod Earth Electrode at corners of Main Earth Mat , Gate & Control Room Earthing

Lightning spikes for building which 100 mm dia GI Pipe, 1.5 mtr to be mounted on insulated base on building top and connected with 50x6 mm GI Flat.

50x6 mm GI flat for all building spikes

40 mm Dia 6.5 mtr long GI. Rod Earth Electrode for building spikes earthing

Electrolytic grade copper plate 600 mm x 600 mm x 6 mm for Transformer Neutral earthing to be provided in 6.5 mtr deep earth pit to be filled with salt & charcoal (as per standard earthing Practices - Power Tr. and aux. Tr.)

ETC for Lattice type Structural Steel (For Column and Beam types refer substation drawing.)

ETC and Construction of Foundation including all foundation materials of COLUMNS including nuts, bolts, spring washers and foundation bolts etc. complete.

Column Type ‘C1’

Column Type ‘C2’

Column Type ‘C5’

Column Type ‘C6’

Column Type ‘C7’

BEAMS including nuts, bolts, spring washers etc. complete.

Beam Type ‘B1’

Beam Type ‘B2’

Beam Type ‘B5’

Beam Type ‘B6’

Erection of equipment mounting structure of the following

(i) 132 kV CVT

Current Transformers

(i) 132 kV, Line CT

(ii) 132 kV, BC CT

(iii) 132 kV, Transformer CT

(iv) 33 kV,Transformer CT

(v) 33 kV, Feeder CT

Voltage Transformer

Lightning Arrester

132 kV Lightning Arrester

33 kV Lightning Arrester

Post Insulator

Tubular Mounting structure for PI of 33kV Aluminium Tube bus ( Refer Substation layout drawing)

Laying of Cable and accessories

19/33 kV ( earthed system ) , 3Core 300 sqmm., AL Conductor, XLPE Insulated , PVC Sheathed, Armoured PVC Outer Sheath Cable for 33 kV outgoing feeder(200 meter/fedeer).

33 kV outdoor termination kit

ETC of LT Power Cable

AC Circuit 1.1 kV PVC Insulated 'PVC sheathed, GI wire / steel strip armoured, Aluminum/Copper Conductor cable of the following sizes:

Station transformer LV side to Main LVAC Board 3 1/2 core x 300 sq.mm AL (XLPE)cable from Station Transformer to LVAC Board

3 1/2 core x 150 Sqmm Al cable for oil filtration

3 1/2 core x 70 Sqmm Al cable for outdoor illumination & for battery charger

2 core x 16 Sqmm Cu cable for BMK, Trafo MB, fire panel & LDB

2 Core 6 Sqmm Cu cable for CT & CVT JB

4 Core 16 sqmm Al cable for panel illumination

4 Core 16 sqmm Al cable fo outdoor illumination JB

3 Core 2.5 sqmm CU cable fo outdoor illumination

DC Circuit

2 Core x 16 sqmm Cu cable for miscellaneous

Termination with double compression Gland and Al lugs for 3 ½ core x 400 sqmm. Al cable.

Termination with double compression Gland and lugs 3 1/2 core x 150 sqmm. Al. cable

Termination with double compression Gland and lugs 2 core x 16 sqmm. Cu. Cable

Termination with double compression Gland and lugs 3 1/2 core x 35 sqmm. Al. cable

Termination with double compression Gland and lugs for 2core x 6 sqmm. Cu cable

Termination with double compression Gland and lugs for 4core x 16 sqmm.. Cable

Termination with double compression Gland and lugs for 2core x 16 sqmm.Cu cable

Termination with double compression Gland and lugs for 2core x 35 sqmm.. Cu cable

Termination with double compression Gland and lugs for1 core x 70 sqmm.. Crucible

Termination with double compression Gland and lugs for 3 corex 2.5 sqmm.Cu cable

ETC of Copper Control Cable

1100 V grade, PVC Insulated, PVC sheathed, steel round wire armoured, stranded control cables of the following sizes:

2 core 2.5 sqmm.

2 core 4 sqmm.

2 Core 6 sqmm.

4Core 4 sqmm.

4 core 2.5 sqmm.

7 core 2.5 sqmm.

12 core 2.5 sqmm.

19 Core 2.5 sqmm.

Double compression Glands and terminations (including ferruling, suitable Cu Lugs to meet the system requirements) for 1100 V grade PVC Insulated multicore Copper stranded conductor control cables of sizes: (2 core 2.5 sqmm.,2 core 4 sqmm., 2 Core 6 sqmm., 4Core 4 sqmm.,4Core 2.5 sqmm.7 core 2.5 sqmm,12 core 2.5 sqmm. &19 Core 2.5 sqmm.)

ETC of Cable Support & Cable Trays

Ladder type Cable Trays for outdoor

450 mm wide

300 mm wide

Perforated Cable Trays inside the Control Building

450 mm wide

300 mm wide

HDD/PVC pipe for laying cable from Trench to equipment

Installation and Commissioning of Distribution board, Battery and Battery charger ETC of AC Distribution Board

AC 415 V, 500 A, 3-Ph cubicle type Indoor, floor mounted, auxiliary service board as per specification comprising of : LVAC Board will have 2 sections , each section will be fed from independent Aux. Transformer (250 KVA , 33/0.433 kV). Busbar rating 600 A, 25 kA for 1 sec, Copper, IP 54 , 2 mm COLD ROLLED / 3 MM HOT ROLLED a) 2 Nos. - Incomer feeders with 500 A TPN MCCB (Microprocessor base) b) 2 Nos. - Outgoing feeders with 160 A TPN MCCB (Microprocessor base) c) 1 No. - Outgoing feeders with 100 A TPN MCCB (Microprocessor base) d) 6 Nos. - Outgoing feeders with 63 A TPN MCCB e) 6 Nos. - Outgoing feeders with 32 A TPN MCCB f) 2 Nos. - Outgoing feeders with 16 A SP MCCB g) Each Incomer Shall Be Provided With 2 Core (for Metering & Protection )

DC Distribution Board ( 110 V DC & 48 VDC)

DC Distribution Board will have 2 sections; each section will be fed from independent Battery charger. Busbar rating 200 A for 110 V DC, 16 kA /for 1 SEC, AL or Copper, IP 54, 2 mm COLD ROLLED / 3 mm HOT ROLLED a) 1 no. incomer 100 A MCCB (Microprocessor base) b) 12 Nos. - Outgoing feeders with 32 A MCCB c) 2 Nos. - Outgoing feeders with 16 A MCCB

DC Distribution Board will have 2 sections, each section will be fed from independent Battery charger. Busbar rating 200 A for 48 V DC, 16 kA / for 1 SEC, AL or Copper, IP 54 , 2 mm COLD ROLLED / 3 mm HOT ROLLED a) 1 no. incomer feeder with 63 A MCCB b) 8 Nos. - Outgoing feeders with 16 A MCCB

ETC of Battery and Battery charger

Battery set ( 110 V DC )

110 V DC, 150 AH lead acid battery of VRLA type complete with accessories as per specification with 10% spare acid in non- returnable container (In tier arrangement).

Battery set ( 48 V DC )

48V DC, 150 AH lead acid battery of VRLA type complete with accessories as per specification with 10% spare acid in non- returnable container (In tier arrangement).

Battery charger (110 V DC)

Automatic float and float cum boost charger 60 A suitable for 110 V 150 AH VRLA battery & charger shall be as per specification

Battery charger (48 V DC)

Automatic float and float cum boost charger 50 A suitable for 48 V 150 AH VRLA battery & charger shall be as per specification

ETC of Fire fighting

NIFPS _ Nitrogen Injection Fire Fighting System System for Transformer

Fire Fighting equipment as per section-6 22.5 Kg capacity FE CO2 type, Trolley Mounted

25 Kg Capacity FE DCP type, Trolley Mounted

DCP 10 Kg Capacity, Wall mounted

FE CO2 6.5 Kg capacity, Wall mounted

DCP 5 Kg Capacity, Wall mounted

Foam Type 9 liter Capacity, Wall mounted

Water CO2 9 liter, Wall mounted

Fire Buckets (12 Nos. with stand in one set)

ETC of Outdoor illumination

LED flood light fitting with 250W led with all accessories control gear for Yard Lighting ( to be mounted on Gantry Tower )

LED flood light fitting with 250W led with all accessories control gear near boundary( to be mounted on 10 mtr. Pole)

LED street light fitting with 150W led with all accessories control gear on street ( to be mounted on 10 mtr. Pole)

70W LED lights post latern light mounted on 2.5 mtr. P-type pole

10 Mtr. MS Tubular poles 540SP-72

2.5 Mtr. P-type pole made of 100mm Dia GI Pipe

Lighting junction box for Light suitable for out door Installation comprising of 4 Nos. CBT M 4 type terminal connector for light connections Max size 150 x150x100mm

Earthwork in filling, levelling, compacting, grading etc as per site condition and Technical Specification.

Supply of earth for filling

Filling, levelling, compacting, grading etc as per site condition and technical Specification.

Design and Construction of Control Room Building complete with all finishes, sanitary system including septic tank & soak pit, plumbing, electrification, air conditioning, potable water system etc. as per drawings and Specification. Rate shall include supply of all materials and labour.

Design and Construction of Security Booth (12.25 Sq. M for each substation) complete with all finishes, Sanitation, Plumbing, electrification etc. as per Specification. Rate shall include supply of all materials and labour.

Design and Construction of Security Fencing complete with RCC footings, beams, brick walls etc. as per drawings and Specification. The rate shall be inclusive of all materials and labour.

Design and Construction of double leaf, heavy duty iron Security Gate with roller system complete with RCC pillars, etc and with a man gate as per Specification and drawing. The rate shall be inclusive of all materials and labour.

Construction of black topped service road and pavement inside switchyard area as per specification. The rate shall be inclusive of all materials and labour.

Storm water drain system with sump pit and 1 HP electric pump set in each sump pit as per Specification with all materials and labour.

Installation of deep tube well with all piping, 2 HP submersible pump, 1500 litre overhead storage tank etc as per Specification with all materials and labour.

Design and Construction of Cable Trenches including supply of all materials and labour as per specification and drawing

Type A (1100 x 1350 mm)

Type B (1100 x 1050 mm)

Type C (800 x 1350 mm)

Type D (Sand filled)

Cable trench road crossing for ‘A’ type trench

Cable trench road crossing for ‘B’ type trench

Switchyard PCC and gravelling as per Specification

Description of Work / Item(s)

Amount

TOWER AND TOWER ACCESSORIES

Tangent towers (A type)

Superstructure-Galvanized steel works including hangers, gussets, strain plates etc. (No of Tower X MT* per Tower)

Superstructure-Galvanized iron nuts & bolts, spring washers, step bolts etc. (No of Tower X MT* per Tower)

Stub set of four-Partially galvanized stub angle

Stub set of four- Galvanized iron nuts & bolts, spring washers, step bolts etc.

Angle towers (D type)

Superstructure-Galvanized steel works including hangers, gussets, strain plates etc. (No of Tower X MT* per Tower)

Superstructure-Galvanized iron nuts & bolts, spring washers, step bolts etc. (No of Tower X MT* per Tower)

Stub set of four-Partially galvanized stub angle

Stub set of four- Galvanized iron nuts & bolts, spring washers, step bolts etc.

For tower with DD+0 with Auxiliary Crossarm

Superstructure-Galvanized steel works including hangers, gussets, strain plates etc. (No of Tower X MT* per Tower)

Superstructure-Galvanized iron nuts & bolts, spring washers, step bolts etc. (No of Tower X MT* per Tower)

Stub set of four-Partially galvanized stub angle

Stub set of four- Galvanized iron nuts & bolts, spring washers, step bolts etc.

For tower with DD+18

Superstructure-Galvanized steel works including hangers, gussets, strain plates etc. (No of Tower X MT* per Tower)

Superstructure-Galvanized iron nuts & bolts, spring washers, step bolts etc. (No of Tower X MT* per Tower)

Stub set of four-Partially galvanized stub angle

Stub set of four- Galvanized iron nuts & bolts, spring washers, step bolts etc.

For tower with DD+18 with Auxiliary Crossarm

Superstructure-Galvanized steel works including hangers, gussets, strain plates etc. (No of Tower X MT* per Tower)

Superstructure-Galvanized iron nuts & bolts, spring washers, step bolts etc. (No of Tower X MT* per Tower)

Stub set of four-Partially galvanized stub angle

Stub set of four- Galvanized iron nuts & bolts, spring washers, step bolts etc.

Procurement of Danger plates.

Procurement of Phase plates.(Set of Three)

Procurement of Number plates.

Procurement of Bird guard. (Set of Three)

Procurement of anti climbing device

Procurement of Circuit Plate

37/3.15 mm All Aluminium Alloy Conductor

POWER CONDUCTOR ACCESSORIES

Stock bridge type Vibration Damper

Preformed Armoured Rods

Mid Span Compression Joint for Conductor

Repair Sleeve for Conductor

FIBRE OPTICS CABLE

48 Fibre (DWSM)OPGW Fibre Optic cable

Fibre Optic Approach Cable (DWSM48F)

OPGW HARDWARE/FITTINGS AND TERMINATIONS

OPGW Suspension Assembly with twisted link c/w pre-formed armour rods and tower bond clamps,

OPGW Suspension Assembly with chain link c/w pre-formed armour rods and tower bond clamps

OPGW double tension pass through assembly

OPGW double tension assembly for splicing location c/w pre-formed armour rods and tower bond clamps

OPGW Tension Single Dead end set for termination/ run in c/w pre-formed armour ros and tower bond clamps

OPGW Vibration Damper c/w pre-formed armour rods

Down Lead Clamp

OPGW Optical Splice Kit (48 Fibre) including junction box

OPGW Optical interface joint kit and junction for line/sub interface on substation gantries

FODP 48F: Indoor type, rack mounted with FCPC coupling and pig tails

Installation hardware set for above 48Fibre, Fibre Optic Approach cableties/clips/cleats, conduits, ducts, supports,fittings, accessories etc for extending OPGW from sub station end tower/gantry to FODP at control/communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/communication room.

Supply of Span Markers for Aviation Requirements

SILICONE POLYMER INSULATORS

Composite long rod Insulators for 132kV Transmission Line-90 KN

Composite long rod Insulators for 132kV Transmission Line-120 KN

Hardware Fittings

Hardware Fittings for 132kV AC with AAAC Panther Conductor-Single "I"Suspension String

Hardware Fittings for 132kV AC with AAAC Panther Conductor-Single ISuspension String (Pilot)

Hardware Fittings for 132kV AC with AAAC Panther Conductor-DoubleTension String

Hardware Fittings for 132kV AC with AAAC Panther Conductor-SingleTension

Description of Work / Item(s)

Amount

TOWER AND TOWER ACCESSORIES

Tangent towers (A type)

Superstructure-Galvanized steel works including hangers, gussets, strain plates etc. (No of Tower X MT* per Tower)

Superstructure-Galvanized iron nuts & bolts, spring washers, step bolts etc. (No of Tower X MT* per Tower)

Stub set of four-Partially galvanized stub angle

Stub set of four- Galvanized iron nuts & bolts, spring washers, step bolts etc.

Angle towers (D type)

Superstructure-Galvanized steel works including hangers, gussets, strain plates etc. (No of Tower X MT* per Tower)

Superstructure-Galvanized iron nuts & bolts, spring washers, step bolts etc. (No of Tower X MT* per Tower)

Stub set of four-Partially galvanized stub angle

Stub set of four- Galvanized iron nuts & bolts, spring washers, step bolts etc.

For tower with DD+0 with Auxiliary Crossarm

Superstructure-Galvanized steel works including hangers, gussets, strain plates etc. (No of Tower X MT* per Tower)

Superstructure-Galvanized iron nuts & bolts, spring washers, step bolts etc. (No of Tower X MT* per Tower)

Stub set of four-Partially galvanized stub angle

Stub set of four- Galvanized iron nuts & bolts, spring washers, step bolts etc.

For tower with DD+18

Superstructure-Galvanized steel works including hangers, gussets, strain plates etc. (No of Tower X MT* per Tower)

Superstructure-Galvanized iron nuts & bolts, spring washers, step bolts etc. (No of Tower X MT* per Tower)

Stub set of four-Partially galvanized stub angle

Stub set of four- Galvanized iron nuts & bolts, spring washers, step bolts etc.

For tower with DD+18 with Auxiliary Crossarm

Superstructure-Galvanized steel works including hangers, gussets, strain plates etc. (No of Tower X MT* per Tower)

Superstructure-Galvanized iron nuts & bolts, spring washers, step bolts etc. (No of Tower X MT* per Tower)

Stub set of four-Partially galvanized stub angle

Stub set of four- Galvanized iron nuts & bolts, spring washers, step bolts etc.

Procurement of Danger plates.

Procurement of Phase plates.(Set of Three)

Procurement of Number plates.

Procurement of Bird guard. (Set of Three)

Procurement of anti climbing device

Procurement of Circuit Plate

37/3.15 mm All Aluminium Alloy Conductor

POWER CONDUCTOR ACCESSORIES

Stock bridge type Vibration Damper

Preformed Armoured Rods

Mid Span Compression Joint for Conductor

Repair Sleeve for Conductor

FIBRE OPTICS CABLE

48 Fibre (DWSM)OPGW Fibre Optic cable

Fibre Optic Approach Cable (DWSM48F)

OPGW HARDWARE/FITTINGS AND TERMINATIONS

OPGW Suspension Assembly with twisted link c/w pre-formed armour rods and tower bond clamps,

OPGW Suspension Assembly with chain link c/w pre-formed armour rods and tower bond clamps

OPGW double tension pass through assembly

OPGW double tension assembly for splicing location c/w pre-formed armour rods and tower bond clamps

OPGW Tension Single Dead end set for termination/ run in c/w pre-formed armour ros and tower bond clamps

OPGW Vibration Damper c/w pre-formed armour rods

Down Lead Clamp

OPGW Optical Splice Kit (48 Fibre) including junction box

OPGW Optical interface joint kit and junction for line/sub interface on substation gantries

FODP 48F: Indoor type, rack mounted with FCPC coupling and pig tails

Installation hardware set for above 48Fibre, Fibre Optic Approach cableties/clips/cleats, conduits, ducts, supports,fittings, accessories etc for extending OPGW from sub station end tower/gantry to FODP at control/communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/communication room.

Supply of Span Markers for Aviation Requirements

SILICONE POLYMER INSULATORS

Composite long rod Insulators for 132kV Transmission Line-90 KN

Composite long rod Insulators for 132kV Transmission Line-120 KN

Hardware Fittings

Hardware Fittings for 132kV AC with AAAC Panther Conductor-Single "I"Suspension String

Hardware Fittings for 132kV AC with AAAC Panther Conductor-Single ISuspension String (Pilot)

Hardware Fittings for 132kV AC with AAAC Panther Conductor-DoubleTension String

Hardware Fittings for 132kV AC with AAAC Panther Conductor-SingleTension

Description of Work / Item(s)

Amount

Setting of stubs (sets of four) including transportation and distribution of stubs and accessories from store to site excluding cost of excavation, concreting and back filling

For Normal Tower

For Suspension tower

Angle Tower D type

For Towers with 18 meter extension

Angle Tower D type

Super structure erection including transportation of structures by any means and distribution of structure and accessories from stores to site excluding fixing of Danger plate, number plate, anti climbing device, hoisting of insulators and paintings, if any as per direction of site Engineer.

For Normal Tower

For Suspension tower

Angle Tower D type

For Towers with 18 meter extension With Auxiliary Crossarm

Angle Tower D type

For tower with DD+0 with Auxiliary Crossarm

Stringing of power conductors including transportation from Stores and distribution of conductors and accessories to sites and laying, stringing, tensioning , clamping, jointing, jumpering and hoisting of insulators complete including cost of all fittings and accessories not specifically mentioned elsewhere per route Km (6 conductors for Double Circuit Line) of line.

Grounding of towers with 3 metre long 25 mm dia G I pipe, including cost of all materials, such as GI pipes, GI bolts & nuts and washer, salt, coke etc as per Specification.

Painting of towers with bituminous paints of approved quality up to 3 metres from ground level including the cost of paints.

Erection of Danger plates. (1 no per tower)

Erection of Phase plates. (6 nos per tower per tower as required)

Erection of Number plates. (1 no per tower)

Erection of Bird guard.

Erection of anti climbing device (1 set per tower)

Erection of Circuit Plate

Check Survey as per Specification

Welding of all nuts & bolts up to the bottom cross arm level including all charges of transportation, materials etc.

A+0 type

D+0 type

D+18 type

Concreting of foundation including all Labour, materials, equipment, excavation shuttering, head loading, back filling etc complete for handling, transportation, batching, mixing, placing, levelling, curing etc complete inclusive of cost of cement and reinforcement steel.

For A Type Tower (No of Tower x CuM* )

Submerged Type

For D+0 Type Tower (No of Tower x CuM* )

Submerged Type

For D+18 Type Tower (No of Tower x CuM* )

Submerged Type

Stringing of OPGW

OPGW cable & characteristic

Stringing of 48 Fibre (DWSM)OPGW Fibre Optic cable including transportation and distribution of OPGW and accessories to site and laying, stringing, tensioning , clamping, jointing , complete including all fittings and accessories not specifically mentioned elsewhere per route Km of line

Installation of Hardware set for above 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories like suspension assembly, tension assembly, dead end tension assembly at line terminations, tension double end set for splice location, vibration dampers, earthing clamps, down lead clamps, in-line spice enclosures etc.

Joint box (48 Fibre)

Installation of FODP

FODP 48F : Indoor Type, rack mounted with FCPC coupling and pig tails

Installation of FODP approach cable

Fibre Optic approach cable (DWSM 48F)

Installation of hardware set for above 48 Fibre, Fibre Optic Approach Cable ties/clips/cleats, conduits, ducts, supports, fittings, accessories etc for extending OPGW from sub-station end tower/gantry to FODP at control/ communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/ communication room

Installation of Span Markers

Shyama Power India limited

Techno Power Enterprises Private Limited

ABN Tower and Transmission Private Limited

POWER CABLE INDUSTRIES

GUPTA POWER INFRASTRUCTURE LIMITED

M/s. ASHOKA BUILDCON LTD

SALASAR TECHNO ENGINEERING LIMITED

T N T Projects Ltd

Neccon Power and Infra Limited

HI-TECH CORPORATION

NK POWER AND INFRASTRUCTURE PRIVATE LIMITED

Win Power Infra Pvt Ltd

GUPTA POWER INFRASTRUCTURE LIMITED

Techno Power Enterprises Private Limited

POWER CABLE INDUSTRIES

Neccon Power and Infra Limited

HI-TECH CORPORATION

SALASAR TECHNO ENGINEERING LIMITED

NK POWER AND INFRASTRUCTURE PRIVATE LIMITED

Shyama Power India limited

T N T Projects Ltd

SIDDHARTHA ENGINEERING LTD

ABN Tower and Transmission Private Limited

Win Power Infra Pvt Ltd

HI-TECH CORPORATION

Neccon Power and Infra Limited

SALASAR TECHNO ENGINEERING LIMITED

ABN Tower and Transmission Private Limited

T N T Projects Ltd

Shyama Power India limited

M/s. ASHOKA BUILDCON LTD

Techno Power Enterprises Private Limited

POWER CABLE INDUSTRIES

GUPTA POWER INFRASTRUCTURE LIMITED

SIDDHARTHA ENGINEERING LTD

Win Power Infra Pvt Ltd

SIDDHARTHA ENGINEERING LTD

POWER CABLE INDUSTRIES

M/s. ASHOKA BUILDCON LTD

HI-TECH CORPORATION

GUPTA POWER INFRASTRUCTURE LIMITED

SALASAR TECHNO ENGINEERING LIMITED

ABN Tower and Transmission Private Limited

NK POWER AND INFRASTRUCTURE PRIVATE LIMITED

Techno Power Enterprises Private Limited

T N T Projects Ltd

Neccon Power and Infra Limited

Win Power Infra Pvt Ltd

M/s. ASHOKA BUILDCON LTD

HI-TECH CORPORATION

Neccon Power and Infra Limited

POWER CABLE INDUSTRIES

Techno Power Enterprises Private Limited

Shyama Power India limited

T N T Projects Ltd

Win Power Infra Pvt Ltd

NK POWER AND INFRASTRUCTURE PRIVATE LIMITED

SALASAR TECHNO ENGINEERING LIMITED

SIDDHARTHA ENGINEERING LTD

ABN Tower and Transmission Private Limited

HI-TECH CORPORATION

POWER CABLE INDUSTRIES

Shyama Power India limited

M/s. ASHOKA BUILDCON LTD

SALASAR TECHNO ENGINEERING LIMITED

SIDDHARTHA ENGINEERING LTD

GUPTA POWER INFRASTRUCTURE LIMITED

ABN Tower and Transmission Private Limited

Techno Power Enterprises Private Limited

Neccon Power and Infra Limited

NK POWER AND INFRASTRUCTURE PRIVATE LIMITED

Win Power Infra Pvt Ltd