General Sanitary works

Amount

Providing and fixing G.I. pipes complete with G.I. fittings (Medium Grade) & clamps including cutting holes/chases in walls and making good the same/earth work in trenches as required (Make Parkash Surya/Jindal) 15 mm nominal bore

--------------do----------- 20mm nominal bore

--------------do---------- 25mm nominal bore

Making connection of G.I. distribution branch with G.I mains of 25mm to 40mm nom. bore by providing & fixing of Tee by cutting & threading the pipe complete.

Providing and fixing PTMT Ball cock of approved quality, color and make complete with Epoxy coated aluminum rod with L.P./H.P.H.D plastic ball (Prayag Make). 15 mm nominal bore

-----------do----------- 20 mm nominal bore

-----------do----------- 25 mm nominal bore

Providing and fixing Ball Valve (Full way valve) made of cast brass including handle: (Ship / DRP Make) 15mm nominal bore

------------do------------ 20mm nominal bore

------------do------------ 25mm nominal bore

Providing and fixing 15mm brass bib cock of approved quality weighing not less than 400 gms.

Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan (Parry ware /Hind ware /Cera)

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete (Parry ware /Hind ware/ /Cera)White colour

Providing and fixing white vitreous china water closet squatting pan.( Indian type) Orissa Pattern W.C. pan of size 580 x 440 mm (Parryware/ Hindware /Cera)

Providing and fixing low level PVC flushing cistern with manually controlled device (handle lever) conf. To IS: 7231 with fitting & fixtures complete (Parry ware/Hind ware/Cera) 10 Liter Capacity – White.

Providing and fixing white vitreous china wash basin including making all connection but excluding the cost of fitting Flat Back wash basin of size 550 x 400 mm (Parry ware /Hind ware/ /Cera)

Providing and fixing of White vitreous China pedestal for washbasins completely recessed at the back for the reception of pipes & fittings (Make Parryware/Hindware/Cera).

Providing and fixing 600x450mm beveled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete.

Providing and fixing of C. P. Pillar cock ‘Parko/Cera Make’ 15 mm nominal size

Providing and fixing of PTMT Pillar cock ‘Prayag Make’ 15 mm nominal size

Providing and fixing CP brass bibcock (Short body) of ‘Parko/Cera Make’ 15mm nominal bore.

Providing and fixing CP brass bibcock (Long Nose) of ‘Parko/Cera Make’ 15mm nominal bore.

Providing and fixing PTMT bibcock of Prayag Make 15mm nominal bore.

Providing and fixing CP brass angle valve for basin mixture Geyser points/washbasins of ‘Parko/Chilly Make’ 15mm nom. bore

Providing and fixing PTMT angle valve for basin mixture Geyser points/washbasins of ‘Prayag Make’ 15mm nom. Bore.

Providing and fixing of C. P. Phase for Pillar cock/Bib Cock 'ISI Make’ 15 mm nominal size

Providing and fixing of PVC waste pipe for sink or wash basin including P.V.C. waste fitting complete Semi Rigid Pipe 32 mm

Providing and fixing C. P. Grating 100mm dia

Providing and fixing phase washer/jumper washer

Providing and fixing steel sink waste coupling of 32/40 mm nominal size

Providing and fixing PTMT grating 100mm dia ‘Prayag make’

Providing and fixing waste coupling of 32/40mm nom size of C.P Brass for wash basins

Providing and fixing PTMT waste coupling for washbasin and sink of approved quality & colour Waste coupling 38 mm of 83 m length &77 mm breadth weighing not less than 60 grams.

Providing and fixing of unplasticised PVC connection pipe with bass union 45 cm length & 15 mm nom. bore.

Providing and fixing of unplasticised PVC connection pipe with PTMT Nut & Collar Bush 45cm length & 15mm nominal bore.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm & 340 x 410 x 265 mm sizes respectively.

Providing and fixing CP jet with PVC pipe to be fixed with WC

Providing and fixing of P.V.C. siphon set to be fixed in cistern of approved quality

Providing and fixing of PVC cistern bend pipe of standard size

Providing and fixing White vitreous china urinal partition of 755x165x365mm size (Make Parryware/Hindware/Cera)

Providing and fixing PTMT shelf 440mm long, 124mm width and 36mm height of approved quality, colour and make, weighing not less than 300 gms (Prayag Make).

Providing and fixing of PVC Floor Trap of self cleansing design including cost of cutting and making good the walls and floors etc. complete. 100mm inlet and 100 mm outlet

---------------do----------------- 100mm inlet and 75 mm outlet

Providing and fixing of low level Cistern Handle of CP Brass of approved quality.

Providing and laying PVC pipe of following dias (Uniplas, Supreme, Finolex make) 4 kg/cm2 pressure in ground including earthwork/cutting chases on walls in case of Rain Water Pipe including jointing with adhesive of approved make ,making good the same etc. complete. Nothing extra shall be paid. 80mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm

----------do------------- Coupler 110 mm

Single tee with door 75x75x75 mm

-----------do------------ 110x110x110 mm

Single tee without door 75x75x75 mm

-----------do-------------- 110x110x110 mm

Bend 87.5° 75 mm bend

-------------do------------- 110 mm bend

Providing and fixing G.I. Union in existing G.I pipe line cutting & threading the pipe & making long screws including excavation, refilling the earth or cutting of wall & making good the same complete wherever required. 15 mm nominal bore

-------------do---------------- 20 mm nominal bore

-------------do---------------- 25 mm nominal bore

Providing and fixing of GI Accessories ISI marked for repair work Socket 15 mm

-------------do----------------- Socket 20 mm

-------------do------------------ Socket 25 mm

--------------do------------------ Reducer Socket 32 mm

--------------do----------------- Elbow 15 mm

-------------do------------------- Elbow 20 mm

------------do------------------- Elbow 25 mm

------------do-------------------- Elbow 32 mm

------------do-------------------- Nipple 15x75 mm

------------do------------------- Nipple 15x100 mm

-----------do------------------- Nipple 15x150 mm

----------do------------------ Nipple 15x230 mm

------------do----------------- Nipple 15x300 mm

------------do------------------ Nipple 20x75 mm

------------do------------------ Nipple 20x150mm

--------------do----------------- Nipple 20x300mm

---------------do--------------- Nipple 25x75mm

--------------do---------------- Nipple 25x150 mm

--------------do------------------ Nipple 25x230 mm

-------------do------------------ G.I. Tank Nipple 15 mm

------------do------------------ G.I. Tank Nipple 20 mm

-------------do----------------- G.I. Tank Nipple 25 mm

-------------do----------------- Tee 15 mm equal

-------------do------------------ Tee 25 mm equal

Providing and fixing PTMT towel rail including end brackets cost of wooden/PVC plugs with screw complete of size 600 x 20 mm of approved make. (Prayag Make).

Providing and fixing PTMT soap dish of approved quality and make. (Prayag Make).

Providing and placing on terraces Polyethylene water storage tank ISI: 12701 marked with cover & suitable locking arrangement & making necessary holes for inlet outlet & overflow pipes but without fittings of Sintex/Star/ Lotus make

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors: Sand cast iron S&S 100mm inlet and 100 mm outlet

---------do------------ 100mm inlet and 75 mm outlet

Providing and fixing Salem Stainless steel A ISI 304 kitchen sink as per IS 13983 with C.I brackets & stainless steel plug 40 mm including painting of fitting & brackets & cutting & making good the walls where ever required 610 x 460 mm & Bowl depth 200mm

Providing and fixing of C.P brass shower rose with 15mm inlet, 100 mm dia including rod with necessary plug and screws.

Providing and fixing of PTMT shower rose with 15 mm inlet, 100 mm dia including rod with necessary plug and screws.

Dismantling old floor traps & refitting the same with C.Conc.1:2:4 including jointing the waste water line including labour & material complete.

Providing and fixing of P.V.C. water tank covers on existing water tanks.

Providing and fixing of C.P. cup

Providing and fixing of C.P. nipple 50mm long & 15mm nom bore

Providing and fixing of P.V.C. P/S trap 100 mm size

Providing and fixing of C.I. P/S trap 100 mm size

Making cement concrete platform with cement concrete 1:2:4 for Indian W.C. seat complete including cost of material & labour

Providing and fixing of C.P. long bend for Low Level cistern

Cleaning of Manholes including clearing of drain pipes from manhole to manhole for making the lines fully functional and disposal of mulba from the site as directed by the engineer Incharge.

Cleaning of terrace/loft water storage tank (inside surface area) at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning anyGI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x1 00 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms

Supply of Labour for repair works :- Assistant Fitter or 2nd class Fitter

-----------do------------ Mazdoor / Beldar