Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹7.5 L Per unit ₹300.90 · 2,500 Nos. | ₹7.5 L Per unit ₹300.90 · 2,500 Nos. |
Tender Value
Refer Docs
Closing Date
25 Aug 2026, 2:00 pmClosed
Single Packet
Normal Tender
No
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
90 days
Expenditure
General
AA
3 conditions · 1 needing a document upload
Bulk quantity order will be placed only on tenderers with satisfactory past performance for Bearing piece assembly with locking arrangement as per Para 2.6 of GCC. The firm may read the Para 2.6 of GCC for full details .
The Authorised dealers must upload tender specific authorization in proper format preferably as per Annexure-4 of GCC attached with the tender failing of which their offer will not be considered as valid offer and summarily be rejected. No back reference will be entertained
Procurement of the item is restricted to Class I local suppliers only (minimum local content- 50%). Public procurement (Preference to Make in India) is applicable as per para 29.0 (29.1 to 29.4) of GCC attached.
30 conditions · 1 needing a document upload
Have you mentioned the complete address of the work premises of the OEM where Third Party Inspection (TPI) inspection will be carried out before dispatch of the material?
Have you attached the past performance credentials with your offer?
FOR: Destination.
Bidders should confirm following certificate for Compliance (a) I have read the clause Sr. No. 32 of GCC attached with the tender regarding restrictions on procurement from a bidder of a country which shares a land border with India and on sub- contracting to contractors from such countries. (b) I certify that this bidder is not from such a country and will not subcontract any work to a contractor from such countries unless such contractor is registered with the Competent Authority. I also certify that this bidder will not offer any products/services of entity from such countries unless such entity is registered with the Competent Authority. (c) I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. (d) I hereby acknowledge that in the event of acceptance of my bid on above certificate and if the certificate is found to be false at any stage, the false certificate would be a ground for immediate termination of contract and further legal action in accordance with the Law. (Bidders confirming this certificate for Compliance shall select Yes in the Complied column. However, in case you dont confirm above certificate for Compliance, select NO in the complied column. In such cases you are required to submit the certificate for Compliance as per Part B of Annexure8 of GCC attached with the tender along-with their Bid/Offer.)
Bidders are reminded to carefully go through IRS conditions of contract (included and uploaded along with the bid document) particularly those pertaining to Code of Integrity, Misdemeanor and penal measures". if two or more bidders are found to be sister concerns of affiliates (having common partner/director/promoter/owner holding company decision control etc) the offers of all such sister concerns are liable to be rejected as per relevant provisions of IRS terms and conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 location across West Bengal · 2,500 Numbers total
Bearing piece assembly with locking arrangement for Single piece uncoupling gear.
AA261470~SER
AA261470
Open - Indigenous
Goods
West Bengal
₹0
Exempted
27 Aug 2026
5 Aug 2026
1 item · 2,500 Numbers total
Bearing piece assembly with locking arrangement for Single piece uncoupling gear. Dra wing No. : RDSO s Drg. No-WD-00046-S-01, Alt. 7 , consisting of item-4,5,6,and 7 (4, 6, 7 one number e ach and 5 two Numbers). (Locking arrangement to be supplied in welded condition with Bearing piece a ssembly and one no. of item no. 5 i.e. washer to be supplied in loose condition with assembly) Material and Specification : IS: 2062:2011(Rev. 7), Amend. No. 1 of Nov. 2012, Grade- E250A. [ Warranty Peri od: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Workshop Wagon Stores/KGP, SER | West Bengal | 2500.00 Numbers |
| Total | 2,500 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5795836.pdf
ATTACHMENT
5795851.pdf
ATTACHMENT
5795842.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .