8653 ADDITION ALTERATION OF SECURITY WALL AROUND PCDA O AND NADFM AND PROVISION OF COMPOUND WALL INCLUDING STEEL GATE AND ALLIED WORKS NEAR SM BK AT AICTS UNDER AGE B R I OF GE SOUTH PUNE

Amount

M&L for RCC 1:1.5:3 type A-1 using 20 mm graded crushed stone aggregate as in footings including raft foundation, plinth beams etc, complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 using 20 mm graded crushed stone aggregate as in columns etc, complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 using 20 mm graded crushed stone aggregate as in parapets and railings up to 60 Cm in heights, coping, appex stones, bed plates curve etc, complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate, set in CM 1:4 as in jallies, 25mm thick (Measured solid) incliding mouldings but excluding frames, complete all as specified and directed.

Dismantaling of barbed wire fencing any type and size, complete all as specified and directed.

Dismantling posts & struts (Wood, steel or RCC), embeded in concrete, any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

S&F concertina coil fencing with punched type concertina coil 600mm dia, 10.0 m openable length having 50 nos. round per 6.0 m length, provided up to 3.0m height of wall with existing angle iron ‘Y’ shaped placed 1.5 to 3.0m apart and with 12 horizontal R.B.T reinforced barbed wire, stud tie with GI staples and GI clips to retain horizontal, including necessary bolts or GI barbed wire tied to angle iron and reinforced barbed tape (RBT)/ spring core (2.5mm thick) wire of high tensile strength of 165 Kg/ Sqm with tape (0.52mm thick) and weight 43.478 gram/ meter complete all as specified and as directed by Engr-in-charge Note:-MS angle iron and C.C Blocks shall be measured and paid separately

Dismanling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises, complete all as specified and directed.

M&L for glazed coloured digital printed ceramic tiles of size 300 mm x 600mm x 7-8mm thick as on vertical surfaces such as skirting, dados and riser to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick rendering in cement mortar (1:4) with and including triangular filleting in CM 1:4 on top edges complete all as specified and as directed

Demolition cement concrete (Unreinforced) in any description and in any position not otherwise specifically provided for like sunken floor or roof slab padding & like including removing of debries and demolished materials to a distance exceeding 5 Km complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting out in in any type of soil, complete all as specified and directed.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed.

Removing excavated materials (Soil) not exceeding 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified and directed.

Removing excavated materials (Soil) exceeding 250m but not exceeding 500m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified and directed.

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F GI two strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs @ 75mm spacing and straining and fixing to any type of standard rail, straining bolts, including securing or tying at crossing with and including provision of galvanized mild steel wire staples or steel pins etc. (each line wire to be measured) complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

M&L for brick work with fly ash Bricks straight or curved on plan exc. 6.0 m mean radius with modular bricks in CM 1:6 complete all as specified and as directed.

M&L for providing PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, seismic and other similar bands, coping, plinth courses, string courses, bed plates and the like including weathering, slightly rounded or chamfered angles and necessary form work etc. complete all as specified and directed

M & L 12mm thick rendering in cement mortar 1:4 on fair faces concrete surfaces or brick masonry work, finish the surfaces even and smooth with out using extra cement complete all as specified and as directed.

M&L for applying two coats cement base paint (snowcem) over a coat of alkali resistant primer on new walls surfaces, including preparation of surface of walls, complete all as specified and directed.

M&L for form work to flat foundation, footings, bases of column, raft & raft beams, side & soffits of foundation and plinth beams and similar work, fair finished surface of concrete, complete all as specified and directed.

M&L for form work to side of pillars, post, struts & columns etc., finished the surfaces fair, complete all as specified and directed.

M&L for form work to fins, louvers, fascia or RCC parapet / coping etc., finished the surfaces fair, complete all as specified and directed.

M&L for ornamental and intricate design framed work as in grills / guard bars, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron door, railings and similar work conforming to Fe 290 Gde-E-165, complete all as specified and directed

All as per item no.26 but dismantling of old serviceable mild steel frame work of any description and re-fabrication of the same and fixing complete all as specified and as directed by Engr-in-Charge

M&L for mild steel plain black sheet 1.60mm thick as in steel gates and similar work, cut to size, hole punched, including round headed screws or rivets and fixed to steel framingwith plain 40mm lap joints with riveted including bending or turning up mitred angles etc as required, complete all as specified and directed.

M&L TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L TMT bars, 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S & F TMT bars 6mm dia and over upto and including 10mm dia as in stirrups, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed.

Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description not exceeding 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Supplying and laying GI pipe, 40mm dia, Light grade suitable for cable protection at road crossing etc including necessary road cutting and making good the disturbed surfaces with PCC 1:2:4, type B-1, using 20mm graded stone aggregate, 100mm thick or fixing on wall / poles of any type, secured with and including clamps, nut bolts etc. complete all as specified and as directed by the Engineer-in-Charge.

Supplying and laying GI pipe, 50mm dia, Light grade suitable for cable protection at road crossing etc including necessary road cutting and making good the disturbed surfaces with PCC 1:2:4, type B-1, using 20mm graded stone aggregate, 100mm thick or fixing on wall / poles of any type, secured with and including clamps, nut bolts etc. complete all as specified and as directed by the Engineer-in-Charge.

Supply, Laying, joint and testing of 6 Sqmm, 4 core LT underground cable 1100 V grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cable (Heavy duty), with earthed system, stranded aluminium conductor including making input & output connections with using suitable size of thimbles, lugs and glands complete all as specified and directed

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed

S&F of junction boxes outdoor type weather proof with fixing accessories made out of moulded PVC 250x200x80mm size has to be fixed at a height of 1.0 m from bottom of column weather proof IP-54 protection, hinged door with 4 pole bakelite connector 63 Amps capacity, 4 way including with 01 No. MCB, SP, 6 Amps including with necessary fixing arrangements like clamps, nuts & bolts etc complete all as specified and as directed

M&L for cutting chases, pinning in, concrete, block /brick or stone walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing or conduit pipe etc and making good, cutting n. exc. 10 cm girth, complete all as specified and directed.

M&L for laying reinforced concrete pipes, class NP2 of dia 100 mm, 2 nos. half round (01 for bottom & 01 for top of cable protection) and leveling of excavated area complete all as specified and directed by Engineer in charge

Taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick / concrete surfaces, finished even smooth surfaces without using extra cement duly mixed with water proofing compound as per manufacturer’s instructions complete all as specified and directed. Note :- WPC shall be measured & paid separately under respective item

Supply only liquid water proofing compound, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of Apex Ultima weather shield paint over a coat of primer, complete all as specified and as directed

M&L for complete removal existing treatment from wall surfaces of any description (Plastered or old decorated) over 10 cm width or girth and applying two coats of Apex Ultima weather shield paint after preparation of surfaces, complete all as specified and as directed

S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.

M&L for framed work as in grills / guard bars, gratings etc. with ends of bars shouldered and / or rivetted, or forged into spikes; framed guard bars; barred iron door, railings and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

S & F rigid steel conduit, 25 mm dia ISI marked including of all accessories and all fittings such as Tees, bends, elbows, reducers, bell mouth, tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete all as specified and as directed

K S CHADHA AND SONS (BID ID -3251407)

PRASHANT CONSTRUCTION (BID ID -3250707)

M/s.BAJRANG CONSTRUCTION (BID ID -3244139)

Gauri Associates (BID ID -3244357)

ANIL CONSTRUCTION CO. (BID ID -3241173)

PAL CONSTRUCTION (BID ID -3241354)