Spl repairs to Md Accn Bldg No G-01 of SOS Area, Building No P-16 AND P-19 and Provn of Garbage pit Bin in Hospital Area at MH at Mil Stn Gaya

Amount

Taking up or down 15 mm bore steel tubing and connections,including cleaning for refixing or removal from the site.

Taking up or down 20 mm bore steel tubing and connections,including cleaning for refixing or removal from the site.

Roughening surfaces of old concrete flooor by picking, sweeping clean and washing down with water to remove dust etc.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.

Demolition of RCC roof , floors (other than ground floors) beams, staircases, landing, chajjas ,RCC tank over roof and similar works

S&F GI Tube 15 mm dia medium grade with all fitting and fixture complete fixed to wall or laid in floor all as specified and directed.

S&F GI Tube 20 mm dia medium grade with all fitting and fixture complete fixed to wall or laid in floor all as specified and directed.

Cutting & screwing existing steel tubing of 25 or 32 mm dia without taking down for addition or alteration complete all as specified and directed.

M&L Brick work with sub class 'B' old size bricks, straight or curved on plan exc 6 mtr mean radius , built in CM 1:6 complete as specified.

M&L Brick work with sub class 'B' bricks straight or curved on plan to any radious in half brick thick walls built in CM (1:4) all as specified.

M&L TMT steel bars 8 to 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia.

M&L Form work to soffits of suspended slabs such as roof slab floor slab not exc 200mm thick with rough finished surface of concrete flat.

M&L Reinforced cement concrete (1:2:4) type B-1using 20mm graded stone aggregate as in slabs.

S&F 1000 Ltr Rotational moulded polyethylene water storage tank (multi layers cylinderical vertical with closed top) hoisted and fixed in position including 20mm dia PTMT float valve & ball complete all as specified and as directed. Make- rotex/sintex/ Polywell/Polycon

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in any position of capacity exc 500 ltr & not exc 1000 ltr complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 Sqm each. ( without taking shutters from the frame).

Taking down chowkhats or frames exc 1.5 Sqm but n.exc. 4.0 sqm each. ( without taking shutters from the frame).

Taking down of shutters exc 1 sqm and not exc 2 sqm each shutters and refixing in same opening.

Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc.

M&L Rendering 10mm thick as in ceiling on brick work or concrete surfaces in CM 1:3, finished even and smooth without using extra cement all as specified and directed.

M&L Rendering 10mm thick internal surfaces on other than fair faces of brick work in cm 1:6 as directed by Engr-in-charge.

M&L Rendering 15mm thick external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC as per manufacturer instruction . Note:-WPC shall be measured and paid separately

Supply only integral water proofing compound

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement.

S&F Powder coated aluminium frame /shutters for windows, ventilators sliding/openable etc including joining cleat for fixing, locking arrangement, rubber beading, screws, handles, hinges, tower bolts etc. complete all as specified. Make: JINDAL/HINDALCO/ INDALCO. Note :- (i) Glazing and wire mesh shall be measured and paid separetely for supply only as the labour element included in this item. (ii) Item shall be paid as per weight of aluminium section. (iii) the rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing

Supply only 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixing with rubber gasket with aluminium frame not exc 0.5 sqm in each pane.

Supply only Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples

M&L 25 mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in levelling coarse of floor complete

M&L 15 mm thick screed bed or bedding layer of cement mortar(1:4) for laying floor finishes complete all as specified.

M&L 10 mm thick rendering/backing coat on other than fair faces of brick wall in CM 1:4 to receive wall tiles on risers of steps, columns, dado/skirting , pillar etc complete.

S & F Glazed ceramic coloured tiles in vertical surfaces 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match .

S&F Plastic closet seat black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device.

M&L Non skid ceramic tiles coloured 7 to 8 mm thick area of each tile exc. 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing comlpete.

M&L Machine cut kota stone 18-20 mm thick in riser of steps, skirting laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing.

M&L Providing 75 mm thick,cement concrete 1:3:6 type C-2(using 40mm graded crushed stone agg) as in plinth protection and simillar works finished even and smooth without using extra cement. Note: Joints 12 mm wide to the full depth of PCC shall be provided at every 3 m and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provn shall be deemed to be included in the quoted rate

S&F CP health faucet 15 mm with flexible tube of stainless steel provided rubber hose and wall hook etc complete as in repair all as specified and as directed Make : SEIKO/Plumber/Parryware

S&F in repair Chromium plated Toilet Paper holder Make : SEIKO/Plumber/Parryware

S&F Urinal Spreader for fixing with 15mm dia pipe. Make : SEIKO/Plumber/Parryware

S&F in repair 15 mm dia two way angle valves, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions (Make-SEIKO/Plumber/Parryware/Essco)

S&F in repair 15 mm dia bore two way bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule . (Make-SEIKO/Plumber/Parryware/Essco)

S&F in repair 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule . (Make-SEIKO/Plumber/Parryware/Essco)

S & F in repair 15mm stop /angle valves cast copper alloy (CP) fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs all as specified and as directed Make -Seiko, plumber, parryware

S&F Gun-metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe.

S&F Gun-metal, globe or gate valves 25mm dia with iron wheel head, screwed both ends for iron pipe.

S&F in repair 15 mm dia stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. (Make-SEIKO/Plumber/ Parryware/ Essco)

S&F in repair PVC flushing cistern syphonic action type, 10 liters capacity, low level white with inlet ball valve, float and handle including bracket including PVC flush pipe, 32mm dia as fixed in repairs complete all as specified and directed. (Make : Hindware (Sleek)/Commander (Slim)/Parryware)

S&F 15mm dia PVC connection 45cm long with brass check nuts fixed as in repairs.

S &F Chromium plated shower rose 125 mm dia with 300mm CP shower arm fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-charge. (Make-SEIKO /Plumber / parryware/Essco)

S&F 600mm long tubular tower rail brass chromium plated 20mm dia, D type fixed with two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws complete all as specified and as directed Make -Seiko, plumber, parryware

S&F Brass chromium plated soap tray/dish with CP screws etc complete all as specified . (Make-SEIKO/ Plumber/parryware/Essco)

M & L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S & F Vitreuos china under Counter Basin with Fixing Accessories, Size: 595 x 420 x 200mm, Shape: Oval Cat No: CNS-WHT-705 Continental series or equivalent in Hindware/Parryware and inclusive of fixing and supply and waste pipe CP waste coupling 32 mm dia complete fixed as in repair.

S&F in repair 15 mm dia bore pillar taps cast copper alloy, with capstan head, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. (Make-SEIKO/Plumber/Parryware/Essco)

S&F Sheet glass shelf 5.5mm thick and 120mm wide with chromium plated bracket guard and railing 60 cm long all as specified and as directed.

S&F PVC ( SWR ) nahani trap / floor trap 75 mm dia all as specified and as directed. Make - Reliance, finolex, supreme, kisan, prince

S&F Grating steel chromium plated 125 mm dia fixed on floor trap/Nahani trap in cement mortar 1:4 as specified and as directed. Make -Seiko, plumber, prayag, parryware

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and connecting with manholes or disposal place all as specified and as directed. Make- Reliance,finolex,Supreme, Kisan, Prince

S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and connecting with manholes or disposal place all as specified and as directed. Make- Reliance,finolex,Supreme, Kisan, Prince

S&F 75mm dia bore PVC ( SWR )bends all as specified and as directed. Make-Reliance,finolex,Supreme,Kisan,Prince

S&F 110mm dia bore PVC ( SWR )bends all as specified and as directed. Make-Reliance,finolex,Supreme,Kisan,Prince

S&F PVC(SWR) 110mm (T) with access door all as specified and as directed. Make-Reliance/finolex/ Supreme/Kisan/Prince

S&F PVC(SWR) 75mm (T) with access door all as specified and as directed. Make-Reliance/finolex/Supreme/Kisan/Prince

S&F 75mm dia bore (SWR) branch piece, single (singleY) equal or unequal all as specified and as directed. Make-Reliance,finolex,Supreme,Kisan,Prince

S&F 110mm dia bore (SWR) branch piece, single (singleY) equal or unequal all as specified and as directed. Make-Reliance,finolex,Supreme,Kisan,Prince

S&F 110mm dia bore PVC (SWR) vent cowl

S&F 75mm dia bore PVC (SWR) vent cowl

S& F 75 mm size MS butt hinges medium weight ,cold rolled.

S& F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified (ISI marked)

S&F 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified. (ISI marked).

S&F 150mm size extruded aluminium alloy handles, cast type anodised complete as specified (ISI Marked).

S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fix complete all as specified and directed.

M&L Preparation of old painted steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and direcetd.

M&L Preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint all as specified and direcetd.

M&L Preparation of new plastered surfaces and applying one coats of acrylic distemper on walls complete all as specified and directed.

M & L 0.50 mm thick birla white putty/JK white wall care putty and making the surfaces smooth & uniform including removing existing treatment or preparation of new plastered surfaces all as specified and as directed.

M&L Preparation of new plastered surfaces and applying two coats of acrylic distemper on walls all as specified and as directed.

M&L One coat of exterior emulsion paint white or tinted on walls or fascia of roof or chajjas on old decorated prepared plastered/painted surfaces of bldg all as specified & directed.

M&L Two coats of exterior emulsion paint white or tinted on walls or fascia of roof or chajjas on new plastered of wall all as specified & directed.

S&F Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised and fixed 100 mm long type C-21

M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in 75mm PCC Sub base

M&L Rendering 10 mm thick on fair faces on concrete surfaces (Roof slab) in CM 1 :4 with water proofing compound as per manufacturer insruction and maintain proper slope of roof surfaces etc complete all as specified. Note:-WPC shall be measured and paid separately

M&L Providing water proofing treatment over cleaned roof surfaces with super thermo APP modified water froofing membran comprssing of following: (i) Cleaning sweeping and washing and down with water to remove all dust etc from plastred roof surfaces/wall and filling of crack with sealing compound etc. (ii) Bitumen based primer conforming to IS 3384-1965 at 0.30 kg per sqm. (iii) One layer of super thermo APP modified water proofing membran with non polyster reinforcement of approved Make 3mm thick and minimum weight @ 3.50 Kg/sqm laid with gas torch and fasted on roof surfaces with roller. The over laps shall be sealed by flame including vertical surfaces after cutting necessary grooving and making good with PCC gola 1:2:4 type B1 etc adhere to bitumen all as per manufacturer instructions. (iv) Applying two coat of aluminium paint @ 0.20 kg/sqm per coat

M & L Excavating in trenches, n exc 1.5M wide and n exc 1.5M depth; for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc n exc 10 Sqm on plan and n exc 1.5M in depth and getting out in hard/dense soil complete all as specified and as directed by Engr-in-Charge

M & L Returning, filling in, including spreading leveling, watering and well ramming in layer n. exc 25 cm in soft/loose soil

Removing excavated material n exc.50 mtr and dispose off the waste material/malwa where directed at a level n. exc 1.5 m above the starting point .

M&L Brick work with sub class B brick straight or curved on plan exc 6m mean radius built in cement mortar 1:4.

M&L PCC 1:4:8 type D-2 using 40mm stone aggregate as in foundation, main hole, complete all as specified.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement

M&L Preparing new surfaces of walls by brooming down or by steel wire brushing and applying Two coat of cement based paint on surfaces of walls.

M&L Preparation of new painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer.

M& L Rolled sections as in main and cross beams, hip and jack rafters purlins angle, where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates using Fe-290 (Gde E-250 165 quality-B. complete all as directed by Engr-in-charge.

S&F Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; guard bar , walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L Factory made vibro compacted precast cement concrete (PVC rubber moulded) reflected type coloured interlocking paver block of any shape and size confirmin to IS 15658-2006 of 60mm thickness M-35 Grade shape and colour approved by Engr-in-Charge all as specified.

Surface excavation not exceeding 30 cm deep and averaging 18.5 cm deep and getting out in soft/loose soil all as specified.

M&L 75 mm thick PCC 1:3:6 type C-1 (Using 20 mm graded stone aggregate) as in floors surface and making a hard surface for precast concrete interlocking tile and directed by Engr in Charge.

M&L Sand filling under floors or in foundations including watering and consolidation for laying floor or paved tile etc.

M&L 100 mm thick Cement concrete type B2, 1:2:4 (using 20 mm graded granite stone aggregate) in sub base of flooring/ hard standing finishing surface even and smooth with out using extra cement.

M&L Plain cement concrete (1:2:4) type B-0 (using 12.5mm graded aggregate) as in coiping and roof kerbs rounded or chamfered on edges.

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 - S, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or hanging door fittings and hanging also fastering and fixing complete etc

M&L Damp proof course to horizontal incl all form works with 25 mm thick PCC 1:2:4 type B-0 ,mixed with water proofing compound,smooth finish surface. Note:-WPC shall be measured and paid separately

M&L Hard core of broken bricks of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to true surface.

M&L RCC 1:2:4 type B1 (20mm graded stone aggregate) beams; hold fast , bressummers lintel over 1.5 mtr span. etc as directed by EIC

Demolition of brick work masonary built in lime or cement mortar including all quiens arches ,pillars etc but including concrete articles.

S&F 500 Ltr Rotational moulded polyethylene water storage tank (multi layers cylinderical vertical with closed top) hoisted and fixed in position including 20mm dia PTMT float valve & ball complete all as specified and as directed. Make- rotex/sintex/ Polywell/Polycon

S&F 20mm dia PTMT float valve & ball complete all as specified and as directed. Make- rotex/sintex/ Polywell/Polycon

S & F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests Water closet (Squatt pattern) complete including provision of lime concrete bedding

Taking down shutters exc 1 sqm and not exc 2 sqm each shutters and refixing in other opening.

S & F Chicken wire mesh made out of low carbon wire 0.36mm thick, annealed, mesh size ( dist between the faces of hexagon) 13mm fixed with nails complete all as specified and as directed.

Cuttting holes Superficial area exc 150 sq cm but not exc 400 sq cm into or through brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar and making good in cement concrete 1: 2:4 type B1 as required complete all as specified.

M&L Precast cement concrete block masonry type B-1, 1:2:4 (Using 20 mm graded stone aggregate) set in CM 1:4 complete all as specified and as directed.

M&L Rendering 5mm thick in ceiling on brick work or concrete surfaces in CM 1:3, finished even and fair without using extra cement.

M & L 1 mm thick birla white putty/JK white wall care putty and making the surfaces smooth & uniform including removing existing treatment or preparation of new plastered surfaces all as specified and as directed.

M&L One coat of cement base paint white or tinted on walls or fascia of roof or chajjas on including complete removal of existing treatment on old decorated prepared plastered/painted surfaces of bldg all as specified & directed.

S & F Pressed steel frames 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified.

S & F Pressed steel frames 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified.

S&F 35 mm thick flush shutters,solid core construction with block board core & ply wood face panels, commercial type on both sides.

S&F 35 mm thick 2nd class H/W Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete as specified.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded

S&F Galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm

S&F Sheet glass 3 mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane all as directed at site by EIC.

M&L Non skid colourerd ceramic tiles coloured 7 to 8 mm thick area of each tile exc. 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match.

S & F in repair 15mm Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms)

S & F Vitreous China wash basin, wliile, flat back, 550x400mm including CP waste coupling 32 mm and PVC waste pipe and brackets complete as in repair. Make : Hindware/Parryware

S&F powder coated Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised and fixed 100 mm long type c-21

Labour only for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. as in repair complete.

M & L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. as in repair complete.

S & F 6 mm thick fiberglass corrugated non asbestos cement sheet roofing with two corrugations side lap fixed with with L-type or J-type or cranked hook bolts in roof, wall etc

S&F 10mm square bars for window guard bars fixed or welded to window conforming to Fe-410-0 or 310-0 complete all as specified.

Taking down carefully copper/aluminum point wiring (light/fan/socket power) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, socket, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfases of walls, floors, etc.

M&L Point wiring complete with PVC insulated unsheathed FR multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC conduit pipe 20mm dia medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes concealed on wall, with 3 mm thick laminated sheet top cover ISI marked. Make: Hylum/Anchor for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing all as specified and directed. Make of Wire : Havells/ Finolex/ Plaza

One light/fan/bell point controlled by one No piano type switch 5 AMPS single pole one way

One socket outlet 5/3 pin 5 Amps controlled by one switch on the same board.

Switch socket combination multipurpose 2 in 1,5 and 15 Amp Flush type ISI Marked complete all as specified and directed. Make: Anchor/ Havells/ SSK

One 3 pin socket outlet 5 Amps independent board.

S&F 3 pin socket outlet point 15 Amps independent, with cables of size 2.5 sq mm multistranded, PVC insulated unseathed FR copper conductor cable, and 1.5 sq mm PVC insulated unseathed copper conductor cable as earth continuity conductor connected to common earth dolly all are in separate PVC conduit med grade not less than 20mm dia ISI marked ivory colour, incl. provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes of suitable size & 3 mm thick laminated hylem sheet top cover of required size all as specified and directed by Engr-in-charge.

S &F Switch Piano Flush button single pole one way 5 Amp complete all as specified and directed. Make: Anchor/ Havells/ SSK

S&F Socket outlet 3/5 pin 5Amp flush type complete all as specified and directed. Make: Anchor/ Havells/ SSK

S&F Switch Socket combination 2 in 1 , 3/5 pin, 6 and 16 Amps flush type.

S&F Switch socket combination multipurpose 2 in 1,5 and 15 Amp Flush type ISI Marked complete all as specified and directed. Make: Anchor/ Havells/ SSK

S&F Batten suitable for T8 retrofit LED tube 18/20 watt with alluminium excusion in 'D' shaped having large diameter all as directed and specified by Engr-in-charge. Product code- DMLNILT816 of Crompton Greaves or equivalent Havells/Bajaj/HPL

S&F Tube in replacemet of its existing ballast with LED tube 20 watt (T-8) with aluminium excusion in 'D' shaped having larger diameter and including single core copper solid wire internally all as directed and specified by Engr-in-charge. Product code- LT8-20-865-2 of Crompton Greaves or equivalent Havells/Bajaj/HPL

S&F in replacement of sheet metal enclousure for MCB DB single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door type complete all as specified and directed. Make : Legrand/ Havells/L&T

S&F in replacement of MCB SPN capacity 40 to 60 Amps DP 240 complete all as specified and directed. Make : Legrand/ Havells/ L&T

S&F in replacement of MCB SP upto 40 Amps 240 volts complete all as specified and directed. Make-Havells/legrand/ L&T

M&L Earthing complete with galvanized iron earth plate electrode 600mm x600mmx6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 of MES sch pt I testing on completion with & incl. 15 mm bore light grade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) cover watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & char coal fixing necessary excavation earth work complete. (GI pipe & GI wire beyond 7.5 mtr will be measured and paid respectively)

M&L in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area16sqmm 2 core Make-Polycab/Havells/KEI

S&F Lamp holder insulated body with back plate for batten fittings complete all as specified and directed.

S&F in replacement of existing CFL bulb into LED Lamp of 1x12 watt suitable for lamp holder and directed by the Engr-in-charge.

S&F water Heater storage type electric supply and installed complete capacity 25 Ltrs with grouting bolts,nuts washers and connecting to GI pipe ,PVC PTMT connection,Bib Taps, butterfly handle stop valve and including complete connecting accessories

M&L Ceiling rose , 3 terminal polycarbonate complete all as specified and directed. Make: Anchor/ Havells/ Philips

Supply and fix Bell Push, flush type, 6 Amps.

Supply and fix Buzer, Ding Dong AC, 230 Volt, single Pole.

M&L for replacment of Sheet metal enclosure MCCB DBs, Triple pole & neutral 4 way with 200 Amp rated bus bar double door suitable for 01 No incoming MCCB of up to 100 Amp capacity and 04 Nos Out going MCB SPN complete all as specified and directed. Havells/ L&T/Legrand NOTE:- MCCB & MCB's are measured and paid separately.

M&L GI pipe 40mm bore, light grade with all fittings laid in trenches/on wall including bend of suitable size/support of UG cables as required at site as directed by Engr-in-charge.

M&L Sub main wiring complete with two runs of 6 sqmm single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls / roofs / floors etc., with one run of 4 Sqmm single core multistranded copper conductor as earth continuity conductor, all as specified inclduing dismantling unseriveable sub main wiring and accessories. Note:- One run conduit, two runs of 6 sqmm copper conductor & one run of 4 sqmm copper conductor is measured as one unit.

M&L in replacement of ceiling fan 1200 mm sweep compete with capacitor canopy, fan hook and down rod incl flexible twin core copper conductor(23/0.76) with provision from celing rose/connector to including fan Regulator 100 watts switch type all as specified. Make- (Havells model -vogue equvalent approved)

Supply and fixing replacement of Metal Exhaust fans 300 mm sweep ,Energy saving fans ,230V AC ,50 HZ including holes Complete. Make-Havells/Usha/Bajaj.

M&L in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16sqmm 4 core Make-Polycab/Havells/KEI

Taking down and re-fixing and connecting electric meter electronic type up to 25 Amps complete all as specified and as directed.

Excavation in trenches n exc 1.5 m wide & n exc 1.5 mtr deep in soft/lose soil for taking out pipe & laying of pipe & getting out for diverting of CI pipe line complete all as directed.

M&L Bricks common burnt sub class B designation for protection of cable complete all as specified and directed.

M&L Natural local river sand for cable protection .

S&F in replacement of MCCB 4 pole, 63 Amps with breaking capacity 16 KA, 415 volts complete all as specified and directed. Make : Havells/ L&T /Legrand

M/S PANCHAM RAI SONS

M/S ABHAY KUMAR AND BROTHERS