138WE/L-13/2020-21

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick above or below ground level complete and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete and disposal of unserviceable material, debris and rubbish to a distance exceeding 1.00Km and not exceeding 1.50 Km complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down shutters of any description area exceeding 1 sqm and not exceeding 2 Sqm each complete all as specified and as directed.

Taking down shutters of any description area not exceeding 1 sqm each complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed

Plain cement concrete 1:2:4 ( nominal mix ) type B-0 (using 12.50 mm graded crushed stone aggregates) as in roof kerbs or mud stops, rounded or chamfered on edges and the like including necessary formwork where required complete all as specified and directed.

35mm thick factory made 2nd class hardwood (Sal/Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified.

2nd class hardwood (Sal/Hollock) , glazed and skeleton shutters, 30mm thick, open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I for door shutters, complete all as specified.

100 mm long mild steel butt hinges, medium weight, cold rolled and fixed, complete all as specified and directed.

75 mm long mild steel butt hinges, medium weight, cold rolled and fixed, complete all as specified and directed.

Extruded aluminium alloy handles, fabricated type, Anodised, size 100mm, complete all as specified and as directed.

Aluminium anodised, barrel tower bolts of extruded Section, size 200mm long and fixed, complete all as specified and as directed.

Aluminium anodised, barrel tower bolts of extruded Section, size 150mm long and fixed, complete all as specified and as directed.

Aluminium alloy, anodised, sliding door bolt, size 300mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing in repair, 2nd class hard wood, beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. and removing old beads to Store complete all as specified and directed.

Sheet glass, 3 mm thick ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm each pane complete all as specified and directed.

Preparation of new or previously untreated wood or wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed by Engineer-In-Charge.

Preparation of old wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-In-Charge.

Rendering 15 mm thick, on other than fair faces of block or concrete surfaces, in cement mortar 1:4 rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed.

Material and Labour for Preparation of new concrete/ plastered surface of any description and applying two coats of cement base paint complete all as specified and as directed.

Material and Labour for Preparation of old concrete/ plastered surface of any description and applying one coat of cement base paint complete all as specified and as directed.

Preparation of old plastered surfaces of walls and applying two coats of distemper oil bound complete all as specified and directed.

Preparation of old plastered surfaces of ceiling and applying two coats of distemper oil bound complete all as specified and directed.

75 mm thick plain cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregates) as in plinth protection/path, finished even and fair complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) , area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as directed by EIC, as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. Shade/Colour of tile shall be approved by the GE.

Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as directed by EIC, as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. Shade/Colour of tile shall be approved by the GE.

Glazed ceramic coloured tiles of 300 mm x 200 mm/ 350 mm x 250 mm / 450mm x 350mm x 7 mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:4 complete all as specified and directed. Shade/Colour of tile shall be approved by the GE.

Bib taps, cast copper alloy, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore pipe, fixed in repair, complete all as specified and as directed.

Concealed type long shank and cup stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed for 15mm bore pipe, fixed in repair, complete all as specified and as directed by Engineer-In-Charge.

Pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe of bore 15 mm complete all as specified and directed

Vitreous China wash basin, white, flat back, size 630x450mm including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe, fiixed in repair, complete all as specified and as directed by Engineer-In-Charge.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe, 'P' or 'S' trap etc. complete including making good to dismantled floor in cement concrete M-15 (1:2:4), type B-1 (using 20mm graded crushed stone aggregates), complete all as specified and as directed.

PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, capacity 10.0 litres and making good to dismantled/ damaged floor/ surfaces, complete all as specified and as directed.

Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (including fixing bolts, flush pipe, PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, capacity 7.0 litres), with grating and union for discharge pipe, flush pipe and waste pipe, Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, complete all as specified and as directed.

40mm dia, high density polyethylene pipes (HDPE) of pressure rating 6 kgf/sqcm, laid in trenches/floor or fixed in walls complete all as specified and directed.

Grating doom 100 mm dia (Minimum weight 25gms) complete all as specified and directed.

Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed.

Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.

PVC connections 15mm size with brass nuts of length 450mm, complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down 25 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed by the Engineer-in-Charge.

Material and Labour for 3-layer PP-R (Polypropylene random copolymer) pipes of 16mm outer dia, concealed pipes SDR 7.4 (PN-16) UV Stabilized and Anti-microbial Fusion Welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings and fixed to walls, ceiling or in floors etc,complete all as specified and as directed by the Engineer-in-Charge.

Material and Labour for 3-layer PP-R (Polypropylene random copolymer) pipes of 20mm outer dia, concealed pipes SDR 7.4 (PN-16) UV Stabilized and Anti-microbial Fusion Welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings and fixed to walls, ceiling or in floors etc,complete all as specified and as directed by the Engineer-in-Charge.

Material and Labour for 3-layer PP-R (Polypropylene random copolymer) pipes of 25mm outer dia, concealed pipes SDR 7.4 (PN-16) UV Stabilized and Anti-microbial Fusion Welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings and fixed to walls, ceiling or in floors etc,complete all as specified and as directed by the Engineer-in-Charge.

110mm dia PVC(SWR) pipe single socketed with rubber ring joints, laid/fixed to tranches or in floor or walls including taking out existing unservicable pipe complete all as specified and directed.

75mm dia PVC(SWR) pipe single socketed with rubber ring joints, laid/fixed to tranches or in floor or walls including taking out existing unservicable pipe complete all as specified and directed.

75mm dia PVC(SWR) junction double,(double T), equal or unequal with access door complete all as specified and directed.

75 mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Rendering 10 mm thick, on other than fair faces of block or concrete surfaces, in cement mortar 1:4 rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed.

PCC 1:5:10 type E-2 (using 40mm graded crushed stone aggregates) as in sunken floor complete all as specified and directed.

25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in floor finish, surface finished even and fair complete all as specified and directed.

APP (Atactic Poly-propylene polymer) modified membranes, five layered, 3mm thick weighing not less than 3.6 Kg/Sqm, having a centre core of polyester non-woven mat (FP) reinforcement dipped into APP modified mix and sealing all the over laps 75mm on length side and 100mm on width side of membranes by torching as per manufacturer’s instructions by authorised applicator only over and including a coat of industrial bitumen primer 85/25 @ 1.2 Kg per Sqm over plastered surfaces @0.50 Kg/Sqm and including 20mm thick screed bed in cement mortar 1:4 with WPC as manufacturer instruction, on roof slab, complete all as specified and as directed (WPC shall be measured and paid separately under respective item) .

Supply only liquid water proofing admixture.

Rotational moulded polyethylene water storage tanks of 1000 liters capacity, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 25mm bore pipe including taking down old unserviceable tank, complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully aluminium / copper point wiring light/fan/socket or power complete including unscrewing from board fitting and fixture such as switches, sockets, ceiling roses, lamp holders, brackets, pendent holder , light fittings , regulators, distribution/ Meter boards, MCBs etc and making good the distturbed surface matching with existing specifications complete all as specified and directed.

Point wiring for one light point or fan point controlled by one switch with 1.50 Sqmm, PVC insulated, unsheathed, FRLS single core, multi-stranded, copper conductor cable, 1100 Volts fire resistance ISI, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed surfaces of walls and ceilings, terminated in and including rectangular PVC board for mounting fitting/ switches/ sockets and 1.50 Sqmm, copper conductor, multi-stranded, FRLS as earth continuity wire connected to earth terminal, including making good to disturbed surface as matching to existing descriptions/ specifications, complete all as specified and as directed.

Description all as per serial item No-59.00 here-in-before but for one 5 Amps socket outlet on same board, complete all as specified and as directed.

Description all as per serial item No- 59.00 here-in-before but for one 5 Amps socket outlet on independent board, complete all as specified and as directed.

Point wiring on independent board with 2.50 Sqmm, PVC insulated, unsheathed, FRLS single core, multi-stranded, copper conductor cable, 1100 Volts, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed surfaces of walls and ceilings, terminated in and including rectangular PVC board for mounting fitting/ switches/ sockets and 1.50 Sqmm, copper conductor, multi-stranded, FRLS as earth continuity wire connected to earth terminal, including making good to disturbed surface as matching to existing descriptions/ specifications, complete all as specified and as directed.

Switch piano, flush type, single pole, one way, 5 Amps, complete all as specified and as directed.

Switch socket combination 2-in-1, 5 Amps, flush type, complete all as specified and as directed.

Switch socket combination 2-in-1, 5/6-pin, 5/ 15 Amps, flush type, complete all as specified and as directed.

Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings,with & including 9 watt LED lamp complete all as specified and as directed.

Ceiling rose, surface bakelite 65 x 50 mm three terminals complete all as specified and directed.

Sheet metal enclosures for distribution box for MCBs, Single pole and neutral, 8 way with, 240 Volts, double door, with 200 Amps rated bus bar blank plate complete all as specified and directed.

Sheet metal enclosures for distribution box for MCBs, triple pole and neutral (TPN), 4 way with, 415 Volts, double door, with 200 Amps rated bus bar blank plate complete all as specified and directed.

48 Watt LED streetlight fitting complete made up of pressure die cast housing with toughned glass and individual high powerLEDs with secondary optics, IP66 protection and impact resistance of IK07 & 10KV external SPD, including GI bracket made out of GI pipe 50 mm bore, medium grade pipe 1.2 m long bend to shape required fixed to pole / wall with 02 Nos MS clamps made out of flat iron 40 x 5 mm including nuts, bolts and washer, painting with two coats aluminium paint over a coat of primer, suitable for LED fitting, complete all as specified and directed. Make : Havells Cat part No LHETAXU7PA6W048 or equivalent in / Wipro / Bajaj /Crompton Greaves

1 x 20W LED, tube light fitting mounted on integrated sleek extruded polycarbonate LED channel with white acrylic cover suitable for 230 volt 50 Hz cool white colour bipin holder connector block etc complete will all accessorized internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete. Make: Havells cat part No- LHEYBYP60E1W020 or equivalent in Bajaj/ Crompton Greaves/ Philips/ Wipro/GE.

Sub main wiring for circuit/ submain wiring alongwith earth wire with two run of 10 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi stranded, FRLS, ISI marked, 1100 Volts grade and one run of 6 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed on surfaces of walls/ ceilings, includingtaking out existing and making good to disturbed surface matching to existing descriptions/ specifications, complete all as specified and directed.

Taking down existing unserviceable/old DBs from any height and any make good complete including disconnection from existing MCBs/Isolator etc complete all as directed.

MCB, triple pole and neutral (TPN), 63 Amps, 415 Volts , 10 KA C series, complete all as specified and directed.

MCB, single pole and neutral, 63 Amps, 240 Volts , 10 KA C series, complete all as specified and directed.

MCB, single pole, 6 to 40 Amps, 240 Volts, 10 KA C series, complete all as specified and directed.

Exhaust fan fancy type 300 mm sweep 1400 RPM, 230 Volts, AC, 50 Hz, single phase including making connections with suitable capacity copper twin core conductor and ceiling rose, complete all as specified and directed (old exhaust fan will be deposited to MES store yard). Make: Havells Turbo Force or equivalent in Crompton Greaves / Bajaj / Usha/ Orient.

Earthing complete with galvanized steel earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with galvanized iron wire 4.0mm dia as earth lead means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 15 mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1(using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and as directed. Note: The cost of excavation and earth work, PCC pit and pit covers, funnel and watering pipe, wire mesh, charcoal dust and common salt, 15mm dia, medium grade, GI pipe as protection to earth lead and earth lead as 4.0mm dia GI wire (main earthing lead from earth electrode to test point length not less than 7.5mtrs) shall be deemed included in the unit rate for earthing.

ANJALI CONSTRUCTIONS

HILL AND CO.

VIJAY ENTERPRISES

ASHOK KUMAR SHARMA