84 H(F)(W)/2023-24

Amount

Part - A ( Material) Following Material Supplied by the Contractor:-

G.I. Pipe 6'' dia

Holding Clamp for top dropper TPMO etc.

Copper L Piece for 250 KVA Transformer

Holding Clamp with DIFFERENT SIZE

Tainless unit

Dead end Clamp

11 KV Fuse Set

Aluminum lug for 63 KVA T/F

Aluminum lug for 100 KVA T/F

Aluminum lug for 250 KVA T/F

Aluminum lug for 400 KVA T/F

Clamp With Nut & Bolt

Different Size Clamp

I Hook

Suspension Clamp

Nut & Bolt

Carriage including loading,unloading & Proper stacking of following Stock materials from store/departmental store to Dump site distance 0 to 20 Kms. (distance approx)

PCC Pole 8.5/9.00 Mtr. long

S.T. Pole 09 Mtr. long

S.T. Pole 11 Mtr. long

11 KV XLPE Cable 3x120 sqmm

11 KV XLPE Cable 3x185 sqmm

11 KV Out door Cable Jointing kit 3x120

11 KV outdoor Cable Jointing kit 3x185 sqmm

11 KV Indoor Cable Jointing kit 3x185 sqmm

11 KV Staight Through Cable Jointing kit 3x185 sqmm

XLPE Cable 3.5x150 sqmm

L.T. XLPE Cable 1x240 sqmm

L.T. XLPE Cable 1x400 sqmm

Aluminun XLPE Cable 1cx630

AB Cable (3x95+1x70+1x16) sqmmq

AB Cable (3x120+1x95+1x16) sqmmq

ACSR Weasel Conductor

T/F 63 KVA

T/F 100 KVA

T/F 250 KVA

T/F 400 KVA

Other matching Materials

Dragging of ST/PCC Pole from dump site to pit site

Fabrication and Errection of Single Pole Support on ST/PCC Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Fabrication and Errection of Double Pole Support on ST/PCC Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Stringing, Sagging, Binding and jumpering of ACSR Weasel Conductor as per RESSPO Norms

Stringing, Sagging, Binding and jumpering of AB Cable (3x95+1x70+1x16) sqmmq Conductor as per RESSPO Norms

Stringing, Sagging, Binding and jumpering of AB Cable (3x120+1x95+1x16) sqmmq Conductor as per RESSPO Norms

Grouting and Binding of Stay with in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Earthing of Poles as per RESPO Norms

Mounting of 63 KVA Transformer as per RESSPO Norms.

Mounting of 100 KVA Transformer as per RESSPO Norms.

Mounting of 250 KVA Transformer as per RESSPO Norms.

Mounting of 400 KVA Transformer as per RESSPO Norms.

Laying of underground 11 KV 3x120/185 sq mm D/C XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x120/185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Indoor end Termination suitable for 11 KV XLPE cable 3x120/185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 11 KV XLPE cable 3x120/185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Construction of Transformer Plinth size 2x2x1.5 including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

FRP Fencing of Transformer Plinth with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc.

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Repairing of Transformer Plinth including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Connection of L.T. XLPE Cable Different Size & Different Places

Rect. Back old and used 25 KVA T/F

Rect. Back old and used 63 KVA T/F

Rect. Back old and used 100 KVA T/F

Rect. Back old and used 250 KVA T/F

M/S S K ASSOCIATES