GEU(N) 36 2023 24 PROVN OF TENSILE STEEL SHED IN FRONT OF BLDG NO NP17 AT CHINAR COMPLEX AND CERTAIN MINOR AND REVENUE WORK UNDER GE (NORTH) UDHAMPUR

Amount

M & L for designing , providing fabricated , assembling and erection of pre stressed special Arch Membrane roofing structure with MS tubular frame work ( As per is structural steel ) in desired profile as per conceptual drawing with type II Precontraint as per manufacturing and supplying standards by Serge Ferrari /Mehler /Verseidag /Sioen . The membrane should confirm to the manufacturing and supplying standards by being pre stretched in both weft and weft direction manufacturing to perform best dynamic stability in both warp and warp direction with approved installers and manufacture for Arch roofing with and atleast two executed job reference in this connection. The fabric must be of HT polyester yarns 1100D tex coated with uniform 230 micron PVC coating over the polyester yarn . The top quote over the PVC must be of height concentration with easy clean availability and superior white pigmentation of the membrane . The dimensional stability of the fabric should be measure as per elongation test of 24 hrs - 10DAN / 5cm which should confirm < 1 % - < 1 % ( EN15977 ) and residual elongation should confirm < 0.4 % -0.4% ( EN15977 ) ensuring dimensional stability in both weft and warp direction , minimum weight should be 900 to 950gm per sqm (EN ISO 2286-2 ) , 4200/4000 N / 50mm ( EN ISO1421 ) and tear strength of 550 / 500N ( DIN53363 ) and with a guarantee of 10 yrs ( with non depreciating guarantee for first three years ) from the manufacturer , pole to pole spacing of the fabric should be as Arch drg , Plan area of covering used for Covered Shed Chargeable area will be fabric surface area inducing the measurement of the fitting used for fixing the civil drawing of foundation will be provided by the supplier and the foundation if any shall be made by contractor as per drawing produced by manufacturer. The wind pressure report along with foundation drawing shall be provided by the supplier / contractor for future reference as per direction of Engr - in - Charge approved by GE . Minimum design criteria of structure: Round pipe pillar 200mm dia, Rafter round 125mm dia, Connecting Rafter Pole to pole 125mm dia, Covered shed round pipe/ Purlin 75mm dia, Base plate 450x550 mm, SS plate and 25 mm dia. nut bolt , Gl wire rope for fabric , Deco Primer and Paint , 900 GSM Sione white Fabric , pole to pole Distance 3.75m / 3.00m, Clear Height is 2.44m, including excavation of pit ( As per required Nos. as per drawing) of size 1 m x 1m x 1.2m and Including returning filling and removing, lean concrete 150 mm thick 1:4:8 type D2 for col footing, 20 mm dia TMT bar in footing and base column at spacing 100mm centre to centre and also refer IS:456 considering wind pressure, structural design,foundation RCC M-30 (Design mix) all catered work is deemed to be included in unit cost .

Demolition of cement concrete (un reinforced) in ground floor and paving n/exe 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete (un reinforced) of any discription and in any position below ground floor and paving exe 15 cm thickness (below ground level), complete all as specified and as directed.

75mm thick PCC 1:4:8 type D1 (using 20mm graded stone aggregate) as in Sub base complete all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed.

Providing precast cement concrete 1:2:4 in road side kerb stone etc (of any section indicated) with plain fair faces, including chamfers, weathering, throating etc and setting in cement mortar 1:4 complete with joints to match as directed by Engr-in-Charge.

Machine pressed rubber moulded manufactured/compacted by vibrating table method pre-cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade with grey cement and pigment and joints filled with sand complete all as specified and directed.

Dismantling of floor hearth or wall tiling incl CM, bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Glazed ceramic coloured tiles in vertical surfaces of wall of size 450mm x 350mm x 7 mm thick as approved pattern approved by GE, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in Cement mortar 1:4 as in skirting, dado, etc, complete all as specified and directed.

Non skid ceramic coloured tiles 8 to 10mm thick, area of each tile exc 0.06 sqm but n.exc 0.11Sqm (min. size 600mm x 600mm) in floors, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub floor finished rough to receive topping layer complete all as specified and directed.

PVC low level flushing cistern 10 ltrs capacity , valve less, syphonic action type, white, with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe etc., fixed in repairs,complete all as specified and directed.Make-CERA cat part No. 2602 P (Camelia)

Vitreous china,white, wash hand basin Padestral, flat back of size 550x400mm, white including MS brackets and pedestal pattern including cutting for and pinning including 32mm dia CP brass waste coupling and PVC waste pipe, fixed in repair complete all as specified.

PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.

PVC flexible connections 600mm long 15mm dia with brass flange nuts & washers complete all as specified &

Soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cadmium plated screws, fixed in repair complete all as specified and directed.

S & F of Grating Doom 100mm dia of PTMT ,complete all as specified and as directed.

S & F of Grating Doom 125mm dia of PTMT with waste Hole ,complete all as specified and as directed.

Centre hole mixer for mixing hot & cold water screwes down for iron pipe for wash hand basin, Brass CP Mixer, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed.

Hand shower 90mm round shape (telephonic shower), chromium plated, with 1500mm long 15mm bore chrome finish flexible pipe with hook, fixed in repair complete all as specified and directed. Make: Jaquar-code HSH-1727,SHA-571, Cera-F 7030105 for hand shower & F 8070401 for flexible tube.

Shower rose, brass, chromium plated, with CP arm 120mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repair complete all as specified and directed.

Single lever wall mixer 3 in 1, with provn of over head shower & hand shower,Brass CP Mixer water screwed down for iron pipe telephonic type, brass, chromium plated, fancy type, with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, with provision for both hand shower and over head shower, fixed in repair, complete all as specified and directed.

Angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.

S & F CP Towel Ring of PTMT fixed with and including wooden/plastic cleats fixed in repair complete all as specified and as directed by Engineer-in-Charge.

15 mm dia medium grade galvanised tubes with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Cutting chases, pining in, making good to facings where required and pointing in cement mortar 1:3, for concealed water tubing etc and maing good, cutting exc 10cm and not exc 20 cm girth complete all as specified and directed.

Health faucet, brass, chromium plated, with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, fixed in repair complete all as specified and directed.

Jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC fixed complete all as specified and as directed. Make : Jaquar, Cera or equivalent as approved by GE

Plastic water closet seat, white colour closet pattern with flat bottom and cover and incl mild steel chromium plated or aluminum hinges device complete fixed in repairs , all as specified.

Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repair complete all as specified and as directed.

Corner Glass self ( With CP brakets) 225 x 225 mm complete all as specified and as directed.Make-Jaquar cat part No. CAN-1173, Cera- F 5005102.

20mm dia brass chromium plated tubular towel rails,D type,60 cm long between flanges Fixed in repair complete all as specified and as directed.

Tumbler holder, brass, chromium plated, heavy duty, having suitable recesses made for hanging necessary bath items complete fixed with brass screws as per manufacturer's instructions. Make: Jaquar Cat part No. AQN-7741, Cera- F 5002107 as approved by GE.

Factory Made Solid PVC Moulded Door Shutterof wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet onback face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

100mm size hinges, Medium Weight, cold rolled mild steel all as specified and directed Make : ISI Marked.

150mm size aluminium handles,cast type , anodised as in repairs, complete all as specified and directed.

S & F Powder coated aluminium tower bolt 150mm long to ventilators fixed with screws, complete all as specified and as directed.

Taking down chowkats or frame n.exc 1.5 sqm each with shutter (without taking off shutter from the frame) .

Surface excavation (not exceeding) 30cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point in soils all as specified

Machine pressed rubber moulded manufactured/compacted by vibrating table method pre-cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and joints filled with sand complete all as specified and directed.

Excavation in trenches, n.exc. 1.5 m wide and n.exc.1.5 m deep and getting out hard/dense soil complete all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:6) with old size bricks complete all as specified and as directed.

M&L Brick work using old size bricks, straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge

Returning, filling in trenches, filling under floor including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/ dense soil complete all as specified and as directed.

Material and labour for 15 mm thick rendering in cement mortar 1:4 with brick/concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 10 mm thick rendering in cement mortar 1:6 on brick/concrete surfaces, finished even and fair without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified.

M&L for rendering 5mm thick in CM1:3 on fair faces concrete surfaces as on ceiling finished even and smooth without using extra cement all as specified and as directed.

M&L for three coat of white wash over coat of primer of newly plastered surfaces ceiling complete all as specified.

M&L for 50 mm thick plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth production all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed with spacer and laid with epoxy grout in neat cement slurry and pointed to match including 10 mm screed bed 1:4 cement mortar complete all as specified and as directed.

M&L Preparing new plastered surfaces of wall and applying two coats of cement base paint over one coat of cement primer including 3mm thick exterior wall care putty ( to be applied in two coats) all as specified. Note: Putty surface shall be rubbed with emery paper to form even and smooth surface complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the ront face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing but 2mm thick Moulded Prelam PVC Sheet on the front ace & 2mm Plain colour PVC Sheet on back face complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F 250 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on olt plate and two on staple plate and fixed complete all as specified and as directed.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 100 mm Butt hinges, medium weight, cold rolled stainless steel, and fixed complete all as specified and as directed.

M&L repairs for 500 ltrs capacity Rotational moulded polyethylene water storage tanks 3 layer white colour (inside and outside) (cylindrical vertical with closed top) hoisted and fixed in position incl inlet,outlet anf overflow connections nipple of suitable size all as specified .

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in position

M& L for Cutting out bricks, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on ertical face in contact with old wall only) complete all as specified and as directed.

Bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection complete all as specified and directed.

S&F 15 mm bore steel water Tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors and incl concealed on internal surfaces complete all as specified and as directed.

S&F 25 mm bore steel water Tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fixing PVC connection 15mm x 450mm length super quality heavy duty cotton threaded with locking nuts and rubber washer complete including taking down the existing unserviceable one all as specified and directed by Engr-in-charge.

S & F stop valve/Angle valve concealed valve cast cpper alloy fancy type 15 mm

S & F s China wash basin, white, flat back, size 630x450 irun excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed.

S&F pillar taps, brass, chromium plated, fancy type, 15mm bore pipe connection complete all as specified and directed.

S&F vitreous China squatting pan, 'Orrisa' pattern size 580 x 440 mm white, with integral foot rests any pattern (Excludding flushing cistern and flush pipe) complete all as specified and directed.

Supply & fix vitreous china urinal,half stall type,white(including pvc connection 15 mm size with PTMT nuts of 300 mm length and angle valves 15 mm bore,fancy type cp,cast copper alloy screwd down high pressure,complete all as specified(excluding flushing cistern&flush pipe and waste pipe) complete all as specified and directed by Engr-in-Charge

Supply of 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) floor trap plain with grating incl. jointing with solvent cement (75 mm bore) complete all as specified and as directed.

S&F PVC (SWR) junction single, (Single T/Y jn with Access door)75mm equal or unequal complete all as specified and as directed.

,-ditto-E45 but 110 mm T/Y Jn with Access door

M & L for salt-glazed stoneware drain pipes 150 mm laid in trenches and jointed as specified .

M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore complete all as specified and as directed.

S & F Towel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

M& L for RCC type B-1 1:2:4 ( Nominal mix ) 20 mm graded agg as in roof slab,column, beams,bands etc. complete all as specified and directed.

M&L for TMT bars 6 to 8 mm dia in stirups cut to length bent to shape required including cranking bending spirally for hopping for columns,hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia confirmation to TMT bars complete all as specified.

M&L for TMT bars 8 mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns,hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia confirming to TMT bars complete all as specified.

M & L for Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs,beams , coloumns landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Ditto, but edges of slab/band exc 10cm but not exc. 20cm wide complete all as specified and as directed.

M&L 15 mm thick cement plaster in 1:3 using WPC finished even and smooth without using extra cement, will be provided when RCC surface is green. The finished surface will be allowed to dry for a while till a string mark easily be made on the surfaces when 450 x 450 mm square make will be made with 3mm thick string over the entire surface complete all as specified and directed.(Water proofing compound shall be measured and paid sepratly )

Broken stone hardcore of gauge excedding 63mm and not exceeding 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, wtered and rammed to a true surface, complete all as specified and as directed by Engr-in-charge

S & F reflective Chequered vitrified tiles 300 X 300 X 10 mm size of approved colour and pattern, set, jointed over 15 mm thick screed bed in CM 1:4, and pointed in neat cement slurry in floors complete all as specified and as directed.

Providing Precast RCC(1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in manhole/drain covers including necessary formwork required including setting in cement mortar (1:4), complete, all as specified and as direced.

Plain cement cncrete 1:2:4 type B-1 (20mm graded crushed stone aggregate) as in coping incl necessary formwork, complete all as specified.

M & L for Red/Black granite(of any type)stone slab 16mm thick machine cut as in window cill/counter top slab bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with rounding to edges of stone slabs one edg complete Including 10mm thick backing coat CM 1:4 complete all as specified and directed by Engr-in-Charge

5mm frosted/ tinted sheet glass, ordinary quality and glazing with rubber neoprene packing for aluminium doors/windows in square/rectangular not exc 0.5 sq. m in each pane, complete all as specified and as directed.

S & F powder coated (of approved colour ) aluminium sections as in frame & shutter of doors, windows (sliding), ventilators (louvers/fixed type) and fixed frame etc fixed to wall including, preparation of disturbed portion both side (internal & external surfaces of wall) match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face) complete all as specified as directed by Engr-In-Charge. (Note :- Rates includes for necessry roller for sliding and locking of sliding windows/ ventilator, etc)

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over one coat of priming over 1mm thick of wall care putty complate all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Providing and fixing power coated aluminium (minimum thickness of power coating 50 micron) for shutters of doors,windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprane gasket required (fitting shall be paid for seprately) with extruded built up standard tubular section /appropriate Z section and other section of approved make conforming to IS:733 and IS:1285 fixing with dash fastner of required dia and size, including necessary filling up the gaps at junctions i.e. top, bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminiums section shall be smooth ,rust free,straight mitred and jointed mechanical wherever required including cleat angle, aluminium snack beedingfor glazing/panneling,CP brass / stainless steel screws all as complete as per architectural drawing and the direction of Engineer-in-charge.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or gorged into spikes, framed guard bar, barred iron doors; ladder, framed balusters; railing; frame work for water tanks, cooler stand etc and similar work conforming to Fe 290 or Gde-E-165, complete all as specified and as directed.

S&F power coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (minimum thicknessof powr coating 50 micron)

Anodised aluminium grill ( anodised transparent or dyed to required shade according to IS: 1868 with aminium anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requiremnet and direction of Engineer-in-charge.

S & F Stainless steel mosquito proof wire cloth of stainless 0.36mm dia and 1.4mm aperture fixed with aluminium flat/channel and screws all as specified as directed by Engr-In-Charge.

S & F Glazing with 5mm thick frosted/tinted sheet glass exc 0.50 sqm in each panel fixed to aluminium section of doors, windows and fixed frame with suitable EPDM rubber packing and powder coated aluminium beading to frame complete all as specified.

S&F floor door stoper of 150mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring,

S&F Stainless Steel 'S' Shape Handles 300mm long Fancy type fixed with screws to door shutters complete all as specified.

S&F Aluminium powder coated (match with door shutters) Hydraullic door closer suitable for aluminium glass door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed. Make- Godreg/Jindal

Taking down Chowkats or frames exc 1.5 Sqm but not exceeding 4 Sq.M each with shutters (Without taking off shutters from the frames)

S&F Mortice lock with two lever MS body (vertical type) 100mm length of latch with 3 set of keys fixed in door shutter with proper in position complete all as specified.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and recast concrete articles all as specified.

Dismantling of floor hearth or wall tiling incl CM, bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

2nd class soft wood clean sawn timber fixed in framing as scantling complete all as specified and directed.

15 mm thick Ist class soft wood austrelian wood paneling fixed with tounged and grouded as wall panelling ancl and two coat varnishing, polishing and prepration with sneezing complete all as specified and directed.

9 mm thick plywood, 5 Nos of ply, grade BWP, type BB fixed with screws to timber frame-work complete all as specified and directed.

Plain fillets, square rectangular or triangular in section clean sawn, scerw with nail bull nosed, splayed chamfered or rounded on one edge or face wrought, 2nd class hard wood (hollock) sec area exc 3 sq cm but not exc 6 sqcm as in cover fillet complete all as specified and directed.

2nd class hard wood plain clean sawn fillets square, rectangular or triangular in section not exc 3 sqcm ,complete all as specified and as directed.

Wall cladding tiles area not exc 0.18 sqm, 7 to 8mm thick on vertical surfaces of wall such as skirting/dados etc set and jointed in neat cement slurry and pointed in white cement to match the shade the tiles over and including 10mm thick screed plaster on stone/brick masonary walls in CM 1:4,complete all as specified and as directed.

M&L point wiring with 1.5sqmm PVC insulated unsheathed FRLS cable with multistaranded copper conductor medium grade ISI marked drawn into and including PVC concealed conduit with all accessories for one light/fan/bell point controlled by one switch with modular and also including 1.5sqmm continuous earth wire connected to common earth dolly complete all as specified and directed,

S&F Switch Piano, flush type, One way, single pole, 5 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

S&F modular switch one way 6 Amps 1 module type

S&Fof decorative ultra slim linear LED lighting fixture 1x18 watt LED complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceiling rose to fitting drawn through in PVC flexible conduit of same colour to match with fittings/wall surface complete all as per directed by Engr-in-charge. Make SYSKA OR equivalent model of wipro and havells.

S&Fof decorative ultra slim linear LED lighting fixture 10/12 watt LED complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated 2 core flexible cable from ceiling rose to fitting by using extra length flexible cable 2 core other than provided by manufacture complete all as per directed by Engr-in-charge.Make : Make SYSKA OR equivalent model of wipro and havells.

S&F new generation energy saving LED bulk head 9/10 Watt with opal diffuser suitable for 600 LUMEN complete. Make SYSKA OR equivalent model of wipro and havells.

Supply and fix in repair sheet metal enclosure double door single pole and neutral 240 Volts for DB's when MCBs to be used 4 way with 200 amp rated bus bar with IP-43 protection. Make Legrand(Ekinoxe)/Schiender(Acti-9)/Siemens(Betagard-8GB32) complete all as directed by Engr-in-Charge.

S&F MCB SPN 6 to 32 Amps, 240 Volts, 'C' Curve completet..Make :-Indoasian/Legrand (DX3)/Schneider(Acti-9)/Siemen(Betagard-5SL4) complete all as directed by Engr-in-Charge.

S&F MCB SP, 6 to 32 Amps, 240 Volts, rupturing capacity 10 KA "C" Series .Make :-Indoasian/Legrand (DX3)/Schneider(Acti-9)/Siemen(Betagard-5SL4) complete all as directed by Engr-in-Charge.

S&F ceiling rose surface bakelite type 65x50mm three terminals.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as directed by Engr-in-Charge

Supply and laying XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core in trenches/floor/pole/GI pipe complete including cuttingof bituminous road/chasing to any surface and making good to the disturbed surface to match the existing.

Excavation in trenches in any type of soil n exc 1.5m deep and not exc 1.5m wide for laying of under ground cable, electric pole and getting out complete all as directed.

Returning filling in including spreading leveling watering and well ramming 25cm in thickness in any type of soil.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point.

M&L for dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable, 15 cm depth after laying cable & stretching the cable all as specified and directed.

Supply and lay brick class ‘B’ covering as mechanical protection to cable with well burnt all as spec.

M&L GI tubing light grade with all fitting and fixed in wall and floor or fixed to pole of size 40mm dia.

M&L for earthing in repair complete with galvanized steel earth electrode 60cmX60cmx6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5m below normal ground level connected to earth lead by means of bolts nuts and washers of GI steel and including earthing pit charcoal, common salt, GI 4.0mm dia lead wire 20mm GI medium grade watering pipe 15mm bore light grade protection pipe 5 Mtr length with wire mesh and funnel PCC pit in PCC 1:2:4 type B-1 using 20mm graded stone aggregate, angle iron frame and RCC cover and earth work complete all as shown in electrical plate No.3 of SSR -2009(Part-1).

MAHAJAN TRADING CO

RAMAN CONSTRUCTION CO