Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹59.2 LAccepted-AOC | ₹59.2 L Quoted ₹60.7 L | L1 | Accepted-AOC L1 |
| 2 | L2₹77.3 LRejected-Finance | ₹77.3 L | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | M/S KAMAK ENGINEERS & CO. L2 | HARSHITA ENTERPRISE L1 |
|---|---|---|---|---|---|
| 1.00 | Deployment of underground water detection system for drilling of Bore well.+B4:B11 | 4 | JOB | 17,000 ₹68,000 Lowest | 35,000 ₹1,40,000 |
| 2.00 | Drilling of bore well, by using heavy duty hydraulic power ring and air compressor for drilling 8’’ dia tube wells by ODEX 165 method of drilling through any kind of soil, boulders and rock upto desire depth including hiring and running charges of machineries, equipment and cost of labour, fuels/ Lubricants etc. as a required welding casing pipe and casing shoes etc. | 320 | Rm | 8,000 ₹25,60,000 | 6,500 ₹20,80,000 Lowest |
| 3.00 | Supplying, assembling, lowering and fixing in vertical position in borewell, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia. | 300 | m | 10,000 ₹30,00,000 | 6,000 ₹18,00,000 Lowest |
| 4.00 | Supplying, assembling lowering of LCG (low carbon galvanized) strainer 200 mm dia including packer. | 24 | Rm | 15,000 ₹3,60,000 Lowest | 15,850 ₹3,80,400 |
| 5.00 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by 'V' notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. | 120 | Hour | 14,000 ₹16,80,000 | 13,500 ₹16,20,000 Lowest |
| 6.00 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia. | 4 | Each | 7,500 ₹30,000 | 5,500 ₹22,000 Lowest |
| 7.00 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete:200 mm clamp. | 4 | Each | 3,700 ₹14,800 | 3,500 ₹14,000 Lowest |
| 8.00 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).:200 mm dia. | 4 | Each | 4,000 ₹16,000 Lowest | 4,290 ₹17,160 |
Tender Value
₹56.5 L
EMD Value
₹1.1 L
Closing Date
22 Jun 2026, 5:30 pmClosed
Dy. General Manager (Electrical)
DGM Elect Contract Division Teesta V Power Station Balutar Singtam Distt East Sikkim 737134
Drilling of 04 No. Bore wells and installation of casing pipe at Left Bank of Teesta-V Power Station, Balutar (Total Loss under Insurance Claim).
2026_NHPC_911857_1
NH/TSV/Cont/CC-371/NIT-1079
Open Tender
Civil Works
Works
30 days
Teesta-V Power Station, Balutar
As Per Tender Document
5 documents required · 5 mandatory
₹1,180
NHPC Limited
₹1.1 L
Yes
11 Aug 2026
6 Jun 2026
24 Jun 2026
6 Jun 2026
22 Jun 2026
6 Jun 2026
6 Jun 2026 - 15 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Deployment of underground water detection system for drilling of Bore well.+B4:B11 | - | JOB | - | - |
| 2 | Drilling of bore well, by using heavy duty hydraulic power ring and air compressor for drilling 8’’ dia tube wells by ODEX 165 method of drilling through any kind of soil, boulders and rock upto desire depth including hiring and running charges of machineries, equipment and cost of labour, fuels/ Lubricants etc. as a required welding casing pipe and casing shoes etc. | - | Rm | - | - |
| 3 | Supplying, assembling, lowering and fixing in vertical position in borewell, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia. | - | m | - | - |
| 4 | Supplying, assembling lowering of LCG (low carbon galvanized) strainer 200 mm dia including packer. | - | Rm | - | - |
| 5 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by 'V' notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. | - | Hour | - | - |
| 6 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia. | - | Each | - | - |
| 7 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete:200 mm clamp. | - | Each | - | - |
| 8 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).:200 mm dia. | - | Each | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.84 MB
SafetyManualaug2024.pdf
Additional Documents • 0.73 MB
TenderDocumentCC371.pdf
Tender Documents • 5.81 MB
BOQ_958335.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].