GE 874/EWS-61/2023-24

Amount

BR and EM Portion

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in any type of soil.

Rough Excavation not Exe 1.5 mt deep and grttig out in soft and loose soil

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation etc n exc 10 sqm on plan and getting out in any type of soil all as specified and directed

Returning filling in including spreading leveling watering and well ramming in layers n exc 25cm all as specified and directed

Removal of excavated materials n. exc 50m and depositing where directed at a level n exc 1.5m above the starting point.

Removing excavated material to a distance exc 250M but not exc 500 and depositing where directed.

M&L for plain Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) in sub base filling and mass concrete all as specified and directed

M&L walling of random rubble stone uncoursed, well bonded, bedded and solidly hearted built in CM (1:6) complete all as specified and directed.

M&L Mild Steel work of Fe -410-W(gde-E-250) Quality A, as in Roof trusses (framed), trussed, purlins, rafters etc, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work/concrete surfaces in CM 1:4 finishing the surface fair & even (without using extra cement) complete all as specified and directed.

M&L for preparing newly plasterd surfaces of wall including priming the plastered surfaces and applying two coats of cement based paint complete all as specified.

M&L pre-cast cement concrete solid block masonary 1:3:6 type C1, (using 20 mm graded aggregate) exc 10 Cm width and setting in CM 1:6

M&L Rendering 15mm thick plaster on external face of stone wall in CM 1:4 finished even and smooth without using extra cement.

M&L for 15mm thick rendering on fair faces of brick work/concrete surfaces in CM 1:6 finishing the surface fair & even complete all as specified and directed.

Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and rounding the edges complete.

M&L Damp proof course to horizontal or vertical surfaces including necessary formwork In cement concrete 1:2:4, type B-0 25 mm thick

M&L hardcore ( broken stone or boulders) of gauge n exc 63 mm deposited spread and leveled in layers n exc 15 cm thick watered and rolled / rammed to a true surface all as specified and directed

M&L for 75 mm thick plinth protection in/Subbase PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as specified and directed.

M&L for 25mm thick cement concrete type B-1, 1:2:4 as in sub base under floor and finished rough surface complete all as specified.

M&L for 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified.

M&L for Glazed ceramic tiles in vertical surface 300X200X7 mm thick set and jointed in neat cement slurry and pointed in colour cement to match

M&L Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm and n.exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with tapping screws as specified

All as per item above but using plain sheet.

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

S&F sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane.

S&F soild PVC door frame of size 50mm x 47mm made out of 5mm plaint colour PVC sheet reinforced with MS square tube, and fitted in opening all as specified.

M&L Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wirestaples

S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specificating and drawing.

S&F Vitreous China squatting pan "Orissa Pattern" size 580 x 440mm white with integral foot rests etc all as specified.

S&F for 100mm long stainless steel butt hinges medium weight cold rolled all as specified and directed by Engineer-in-Charge.

M&L for Aluminium handles cast type anodised 100mm long

M&L M&L for Aluminium alloy, anodised sliding door bolt 200mm long.

Mild steel butt hinge medium weight cold rolled 75mm size

S&F Mild steel pressed handle, oval ltype stove enamelled, black size of handle 150mm

Mild steel tower bolt stove enmelled black 150mm long black with bright bolt and fixed

M&L preparing newly plasterd surfaces and applying three coats of white wash on wall etc complete as specified.

S&F AC plain sheet ceiling 4mm thick on aluniminium snap grid work 60cm x 60cm with using 36.5mm 23.5mm x 1.5mm thick main tee, 23.50 x 23.50 x 1.28mm cross tee and 25 x 25 x1.5mm angle fixed to perimeter of wall for false ceiling including necessary supporting hanger with 3.0m dia GI wire and J bolts washer nuts for securing frome work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 610x610mm, including two coats of oil bound distemper on over one coat of primer and preparation of surface complete.

Vitreous china bowl urinal flat back, of size 465x355x265mm white (minimum), with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including discharge pipe of PVC 32mm dia complete all as specified and directed.

S& F PVC reducer couplings fixed at outlet of urinal pot incl. suitable length PVC flexible pipe 25 mmdia . ( Minimum weight 32 mm-45 gms) complete all as specified

S&F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, complete all as specified and directed.

M&L for Stop/Angle valve 15mm bore, cast copper alloy screwed down, high kpressure, with crutch jor butter fly handlel, screwed bosth ends for iron pipe or for unions complete as specified

S&F Bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked).

M&L Lagging to pipes 15mmdia used in internal water supply or plumping all round with,25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144 kg/cum conforming to IS-9842

M&L Lagging to pipes 20mm dia used in internal water supply or plumping all round with,25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144 kg/cum conforming to IS-9842

S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed with 20mm dia

S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement

S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified.

S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall /floor /laid in trenches etc complete all as specified.

S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall /floor etc complete all as specified.

S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified.

S&F 75mm bore PVC (SWR) bend or tee or radius complete all as specified.

S&F PVC gully trap square or round mouthed type (P) , size of trap 125x 110mm and jointing to drains with solvent cement in repairs complete all as specified.

S & F Waste coupling of PTMT (half or full thread ). ( Minimum weight 32 mm-45 gms / 40mm-60gms) for 32mm bore dia of discharge pipe to WHB etc complete as specified .

S&F PVC valveless syphonic action type flushing cistern,low level white with inlet ball valve float and handle incl brackets (10 Ltr) capacity, with flush pipe etc fixed complete all as specified and directed.

S&F Soap dish chromium plated,any type, fixed to wall with chromium plated brass screw complete as specified

S&F vitreous china wash basin, white, flat back, size 550x400mm including waste chain & plug and porcelean stopper and including brackets, waste pipe, etc complete

S&F Pillar tap 15mm bore cast copper alloy, with capstain head chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed both ends for iron pipe or for unions and fixed

S & F tubular towel rail 60cm long, aluminium anodised fixed with and including CP brass screws and wooden/plastic cleats all as specified.

S&Fsteel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, bore of tube 20 mm all as specified

S&F GI steel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, bore of tube 15mm all as specified

M & L PCC 1:3:6 type C - 2 in foundation, filling and mass concrete (using 40 mm graded crushed stone aggregate).

Extra over stone walling for hammer dressing to face of stones and dressing of face beds and joints, as specified of random rubble walling uncoursed or brought upto courses with maximum depression on face from stragith edge held against the dressed surface n exc 20 mm on granite or trap stone.

M & L PCC 1 : 3 : 6 type C2, (40 mm graded stone aggregate) as in surface channels and drains including necessary from work

M&L extra for forming fair finished drain or channel 45 cm inner girth in cement concrete using extra cement, including forms, moulds etc.

Mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or secur;ing with clips quality conforming to FE-410-s or FE 410-0

M&L 60mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006, M-35 Grade complete all as specified and directed.

M&L for 25 mm sand cushion under paving block including watering and consolidation for interlocking tiles all as specified.

Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, and other similar bands,plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, kneelers, apex stone,bed plates and the like including weathering slightly rounded or chamfered angles and throating, all as specified and directed.

Construction of 50 users conventional RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter complete, all as specified and shown on drawing No.CESZ/TD-1104/2015

Construction of soakage well (brick masonry) of 1.2m internal dia and 3.00m deep below inlet level incl necessary earth work, filling with brick bats of gauge 40 to 80mm, SWG inlet pipe junction 150mm bore including all other relevant works, complete, all as specified and shown on drawing No.CESZ/TD-1104/2015

Supply and laying DWC pipes ( Double wall corrugated) of class SN-4, IS-16098 (Part-II) of size internal dia of 150 mm, laid in trenches and jointed complete with coupler,bends,tee, reducers etc complete all as specified & directed.Make: Ultra plus DWC PE pipe of Supreme/Corfit of Prince/D-Rex DWC of Astral.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

M&L brick work with subclass 'B' bricks straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar 1:4 etc complete all as specified & directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls mixed with WPC 3% by weight of cement finished even & smooth without using extra cement. etc complete all as specified & directed. Note:- WPC shall be measured and paid separately

Supply only Integral water proofing compound.

M&L for rendering 15 mm thick in CM (1:4) on brickwork or concrete surfaces etc complete all as specified and directed.

M&L Precast cement concrete B1 type, (1:2:4) using 20 mm graded aggregate in landings cover slabs (for manholes etc.) chullah, hoods, chajjas, water troughs mangers, shelves and similar articles with plain faces with set in cement mortar 1:6. etc complete all as per specified and directed.

M&L Point wiring with 1.5 Sq. mm (nominal area) HR-FRLS PVC insulated and unsheathed multistranded copper conductor cable 1100 Volts grade drawn through and incl PVC rigid concealed conduit (ISI Marked) suitable size with all accessories having thickness not less than 1.8mm incl sheet steel/ CI terminal box of adequate size having thickness not less than 2mm including 3mm thick hylem/masonite sheet including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor multistranded cable of green colour as earth conductor connected to common earth dolly complete all as specified and directed for one light / fan point controlled by one switch 5 Amp, SP, one way, 240 Volts. Note: 1. Connections of cable with MCBs/Switch Sockets shall be done through proper size copper/brass thimbles. 2. Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit in not feasible. 3. Proper colour code will be used for wiring as per the electrical rule and as directed.

All as per Srl item above but for one 5 pin 5 Amp socket outlet point on inependent board controlled by one switch SP, one way 5 Amp, 240Volts.

All as per Srl item above but for one 5 pin 5 Amp socket outlet point on same board controlled by one switch SP, one way 5 Amp, 240Volts.

M & L for point wiring for 3 pin 15 amps multi socket outlet / sheet metal enclosureindipendant point with 4 sqmm single core PVC insulated unsheathed multistranded copper conductor HR-FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained

S&F 20W surface / wall mounted batten LED luminair, extruded aluminium housing with PC diffuser and ind electronic driver with high efficiency long life, CRI = 80 (Minimum), PF > 0.95, luminous efficacy > 100 lumens/Watt operating voltage 140V-240V, CCT (K) > 6500, THD < 10% complete including 20W LED tube rod with all accessories internally prewired and including connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and directedories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete

S & F switch piano flush button single pole one way 5 Amp AC 240 volts, all as specified and as directed.

S & F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

S & F socket outlet 2 in 1, 3 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

M & L for ceiling rose, PVC/Polycarbonate, insulated body, surface Bakelite 65mm dia three terminals all as specified and as directed.

S & F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.

S & F LEDbULB, B22 type ,14 watt,complete all as specified and directed.

S&F in replacement Energy saving, surface mounted, bulk head LED luminaire 10 W with PDC aluminium housing and polycarbonate diffuser with IP 66 protection complete including connecting up with three core twisted flexible copper conductor cable of suitable size.all as specified

S&F RCBO SPN 30 MA, 240V, 50Hz, 10 KA, 'B' curve of rating 6-32 Amp all as specified and directed.

S&F MCB SP 240V, 50Hz, 10 KA, 'B' curve of rating 6 to 32 Amp all as specified and directed.

S & F of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge.

S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminum conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat of circular of size 10 Sqmm complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza

Supply of Exhaust fan,steel body AC single phase,230V of size 300mm sweep withblades and frames and louvers

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (Earth pit not less than 2.25 metre deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as showin in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust, common salt all around Earth plate upto 150 mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40 mm thick RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregrate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including test on completion. (Note :- The rate quoted include cost of min 7.5 metre earthing wire)

M/S AB AHAD RATHER

patriotic builders

MOHAMMAD YOUSUF MIR

Bidder Name

M/S AB AHAD RATHER

patriotic builders

MOHAMMAD YOUSUF MIR

m/s mohd saleem and co