Strengthening of NJ SF Ooty

Amount

Removing of Existing Chain link Fencing, inorder to provide to entry etc., completed as directed by federation officers and as per standard specification.

EARTHWORK EXCAVATION for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc., complete complying with standard specifications.

EARTHWORK EXCAVATION (OPEN EXCAVATION) for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc., complete complying with standard specifications.

Providing, Laying and spreading and compaction graded stone aggregate to wet mix macadam 250mm thick etc., completed as directed by federation officers and as per standard specification

Supplying and filling in foundation and basement and trenches with M.SAND in layers of not more than 15cm thick, well watered, rammed and consolidated complying with standard specification etc., complete as directed by the departmental officers.

PLAIN CEMENT CONCRETE 1:5:10 (One cement, five sand and ten aggregate) using 40mm gauge hand broken hard granite stone jelly for FOUNDATION including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification and as directed by the departmental officers

Brick work in cement mortar 1:5 (One cement and five sand) using best quality II class chamber burnt bricks of size 23x11x7cm (9" x 43/8" x 23/4" ) including curing etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost) Upto Basement

Above Basement Upto 4.5m

PLAIN CEMENT CONCRETE 1:2:4 (One cement two sand and four aggregate) using 20mm gauge hand broken hard granite stone jelly for FOUNDATION including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification and as directed by the departmental officers

REINFORCED CEMENT CONCRETE 1:11/2:3 (One cement One and half sand and four aggregate) using machine crushed 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work excluding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams etc., complete complying with standard specification and as directed by the departmental officers. Upto Basement

Above Basement

Supplying, fabricating and placing in position mild steel/Ribbed tor steel rods for all RCC works including cutting, bending to required shape and placing in position, cost of steel and binding wire and all labour charges, conveyance etc. in all floors complete complying with standard specfication.

Plastering with Cement Mortar 1:5 (One Cement and five Sand) 12mm thick used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

supplying and fabricating in position of structural steel work (MS angle, channel , plates, M.S pipe,M.S. Tube for rafters,purlins etc.,) cost including welding and cutting,/bolts and nuts including one coat of red oxide priming coat etc complete

Supplying and fixing in position of Powder coated G.I roofing sheet of 0.47mm thick with necessary bolts, nuts and washers, metal screws etc. complete with standard specification and as directed by the departmental officers.

PAINTING NEW IRON WORKS with two coats of Enamel paint of approved quality and colour over a priming coat with approved quality of red oxide primer. The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification. (The paint to be used should be got approved by the executive engineer before use on work.)

Painting the wall surface using best quality of PLASTIC Emulsion paint TWO COAT with ONE COAT OF PRIMER as per the Specification of the approved colour to give an even shade, including cost of brushes and all other materials required and the scaffolding charges. ( The paint to be used should be got approved by the Departmental officer before us on work.)

Supplying and erecting CENTERING for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS. STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm * 60cm and BG 10 stiffened with welded mild steel angles of size 25mm * 25mm * 3mm for boarding laid over countrywood joists of size 10cm * 6.50cm spaced at about 90cm centre to centre and supported by Casuarian props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete and as directed. Upto Basement - Plain Surface

Upto Basement - Column Surface

Above Basement upto 3.30m - Column Surface

Above Basement upto 3.30m - Plain Surface

PLASTERING with cement mortar 1: 5 (one cement and five sand) 20mm thick including curing finishing etc., Complete as per standard specification and as directed by the departmental officers.

Providing GRANOLYTHIC FLOOR FINISH of following thickness with plain cement concrete 1:2:4 (One cement, two sand and four stone jelly) using 6 mm to 12mm size hard broken granite stone chips including curing neat finishing etc., as directed by the departmental officers and as per standard specfication in all floors. - 20 mm thick

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Supplying and Fixing of GI Corugated Sheet for roofing inculding Bolts and nuts etc., completed as directed by federation officers and as per standard specification

Supplying and Fixing In Position of Best Mangalore tiles for for over GI Sheets including Teak wood Reapers, bolt,nuts etc., completed as directed by federation officers and as per standard specification

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., completed as directed by federation officers and as per standard specification

Supply and Joining By threading/welding 65 mm dia GI 'B' Class Pipe and fixing the same in RCC Columns with all required G.I. Specials etc., completed as directed by federation officers and as per standard specification

PAINTING the wall surfaces with TWO COAT of Weather shield max exterior paint of the approved colour as per the Specification including ONE COAT OF PRIMER to give an even shade at the external walls with necessary scrapping including cost of brushes and all other materials required and the scaffolding charges. (The paint to be used should be got approved by the Departmental officer before us on work)

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

Providing PVC Rainwater Gutter using PVC Pipes including all necessary accessiories and Fittings etc., completed as directed by federation officers and as per standard specification

PLASTERING with cement mortar 1: 3 (one cement and five sand) 12mm thick including curing finishing With water proofing Curing etc., Complete as per standard specification and as directed by the departmental officers.

Supplying laying and jointing various diameter Cast Iron pipe of approved quality and best variety conforming to I.S.S and with I.S.I. Mark including cutting threading and fixing Cast Iron specials but excluding cost of such specials and fixing to wall by concealing them including chipping and making holes on the walls or drilling holes in the roof and making good the dismantled portions to orginal condition including cost of special clamp with screws nails teak wood plugs and any other accessories necessary for fixing in position etc., complete as per standard specifications and as directed by the departmental officers

Construction of Manhole Chamber including light duty chamber cover etc., completed as directed by federation officers and as per standard specification - 0.60 x 0.60 x 0.45 to 1.00 m depth

Supplying and filling of Gravel in layers of not more than 15cm thick, well watered, rammed and consolidated complying with standard specification etc., completed as directed by federation officers and as per standard specification

BRICK WORK in cement mortar 1: 3 (One cement and three sand) using second class chamber burnt bricks of size 9" x 43/8" x 23/4" for the Partition walls including hoop iron reinforcement curing etc., complete complying with standard specifications.

FLOORING with scratch proof Designed CERAMIC TILES of premium quality and size 400x400x8mm in all floors over 20mm thick cement mortar 1:3 (one cement and three sand) base above the existing bed concrete and pointing with same colour cement added with colouring pigments at 3.00 kg/m2 etc.,

Flooring with Anti skid Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mmceramic tiles laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc.,

Supplying and fixing of cuddapah slabs of 38mm to 40mm thick of best and approved quality for the Cupboard slab in c.m. 1:3 mix and pointing the same Complete as per Standard Specification and as directed by the departmental officers.

Finishing the top of roof with one course of PRESSED TILES of size 23cm * 23cm * 2cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound confoRming to I.S. at 2% by weight of cement used and the top pointed with same mortar mixed with redoxide to the full depth of tiles,

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Wiring with 2x1.5 sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge M.S.conduit pipe on wall and ceiling with M.S.accessories with 150mmx100mm x 75mm MS switch box inflush with wall, with 3mm thick hylum sheet cover for 5A 3pin non interlocking flush type CS plug with painting of suitable colour with continuous earthwire connection of 14SWG TC wire for open plug point

Supplying and fixing of 20W 4 feet LED fitting with TW round blocks on wall or ceiling with pvc unsheathed copper leads from terminals to the fitting complete (make: philips / havells / equivalent)

Supply and fixing of 6A 3 pin and 2 pin combined flush type wall socket with 6A flush type modular switch with cover plate on modular switch with cover plate on modular metal box in flush with wall with earth connection

Supply and fixing of 16A 3 pin combined flush type wall socket with 16A flush type modular switch with cover plate on modular switch with cover plate on modular metal box in flush with wall with earth connection

Supply and fixing of WT bulk head fitting with guard (philips / bajaj / crompton / k- lite ) Suitable for 12W LED lamp with 12W LED

Supplying and fixing in position best white glazed EUROPEAN WATER CLOSET of approved quality with 100mm 'P' or 'S' trap with double flapped rigid PVC seat cover with the CP brass hinges with PVC low level flush tank of 10 litres capacity including 2 Nos 15mm dia brass nipple, 15mm dia PVC brass connection, 15mm dia G.M. wheet valve, 15mm dia nylon connection and giving necessary water supply connection, etc., complete as directed by the departmental officers. (The water closet should be got approved by the Executive engineer before use on work)

Supplying and fixing of high density HDPC PVC tank like SINTEX TANK of approved quality and ISI make with necessary inlet and outlet having a capacity of 1000 litres and it is to be fitted over roof slab as per standard specifications and as directed by the departmental officers.

Supplying and laying PVC pipe of 15kg/cm2 of approved make and quality for wall as well as in ground etc., completed as directed by federation officers and as per standard specification. 1' dia PVC Pipe

3/4' dia PVC Pipe

Supplying and laying of 4'' dia PVC pipe of 6kg/cm2 etc., completed as directed by federation officers and as per standard specification

Supplying and fixing of RCC ring 4' dia with standard specification etc., completed as directed by federation officers and as per standard specification

Supplying and fixing of RCC cover slab 4 1/4' dia with standard specification etc., completed as directed by federation officers and as per standard specification

Supplying and fixing of health facit of 1/2'' dia with standard specification etc., completed as directed by federation officers and as per standard specification (Metro make)

Supplying and fixing of two in one tap of metro make for toilet use etc., completed as directed by federation officers and as per standard specification

Dismantling of Existing RCC Concrete in Road area between Shed No 2 and Shed No.3

Laying of one course of Brick as means of Protective cover for Pipe etc., completed as directed by federation officers and as per standard specification

Supply of 3 1/2 x 185 Sqmm PVC Armoured UG Cable

Supply of 3 1/2 x 35 Sqmm PVC Armoured UG Cable

Through Cleaning of plastered Surface etc., completed as directed by federation officers and as per standard specification

Dismantling of Existing P.C.C 1:5:10 & PCC 1 :2:4 completed as directed by federation officers and as per standard specification

Removing of Brick on edge pavement Flooring and restacking the non Damaged Bricks etc., completed as directed by federation officers and as per standard specification

PAINTING the plastered surface in TWO COAT of exterior CEMENT PAINT for OLD wall surface as per the Specification of the approved colour to give an even shade at the external walls with necessary scrapping including cost of brushes and all other materials required and the scaffolding charges. ( The paint to be used should be got approved by the Departmental officer before us on work.

Removing of Damaged Stainless Steel Basin etc., completed as directed by federation officers and as per standard specification

Supply and Fixing of Stainless steel basin Including Necessary SS Chest Nut welded with SS Rods etc., completed as directed by federation officers and as per standard specification

Refixing and Repairing of Door Shutters etc., completed as directed by federation officers and as per standard specification

Supply and fixing of RCC fencing post of Size of 0.15 x 0.15 and height of 3.25 m including shuttering reinforcement casting finishing fixing in position anc concenyance etc complete

Supply and Fixing of GI Chainlink fencing 3" x 3" - 10 G including convenyance GI Bending wire etc.,etc., completed as directed by federation officers and as per standard specification

Supply,laying of barbend wire of 2 core 3 ply of 10 gauge of approved quality and tying with GI wire etc., complete etc., completed as directed by federation officers and as per standard specification

WHITE WASHING TWO COATS using best freshly burnt white shell lime in all floors including cost of lime and other materials, brushes, scafolding charges etc. complete complying with standard specification and as directed. (The rate is inclusive of cost of gum, best quality of blue powder etc.)

Clearing and Levelling the compound fencing portion removing small trees and heavy jungle etc by using JCB etc., completed as directed by federation officers and as per standard specification

Removing of existing gate completed as directed by federation officers and as per standard specification

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

GST (Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.)

P.Haridass