SPL REPAIRS TO BLDG NO P-02 MALL ROAD AND BLDG NO P-47 SATA REGT AT NASIRABAD MIL STN UNDER GE NASIRABAD

Amount

Taking down cement or cement lime plaster/Pointing on stone/brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M& L for rendering 15 mm thick in cement mortar (1:6), on stone masonry surfaces finished fair and even complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on stone masonry, external surfaces finished fair & even complete all as specified and directed.

M&L for rendering in cement mortar (1:4) 10mm thick as in ceiling surfaces finished fair and even complete all as specified & directed.

Dubbing out average 10 mm thick in CM 1:4 on irregular faces of walls or concrete chhajjas etc complete all as specified and directed.

M & L for rough cast plaster mix with crusted stone (6-10 mm), sand and cement in the ratio 1:1:1 , over 15 mm thick rendering in CM 1:4 as in under coat including dubbing coat (if required) complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper including 1mm thick wall care putty over plastered surface incluing preperation of plaster surface even and smooth complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed

M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed

M&L for Complete removal of existing treatment of old plastered surface of wall and applying two coats of distemper oil emulsion/oil bound distemper over coat of 1mm thick white wall care putty on plastered surface complete all as specified and directed.

M&L For Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M & L preparation old decorated surfaces of walls and providing one coat of cement base paint complete all as specified and directed.

Taking down existing unserviceable treatment of any description including cement plaster/concrete any thickness from roof surface cleaning of roof surfaces and preparing it for further treatment and removing rubbish from the site up to 50 mtrs complete all as specified and directed.

M & L for water proofing treatment roof surfaces with APP modified membrane with non woven polyester reinforced, weight not less than 3 Kg /SQM and thickness of membrane not less than 3 mm thick having thermal insulation with white mineral/gravel finish on upper side of membrane uniformly embedded during manufacturing process laid in following sequence complete all as specified and directed. (a) Applying 10 mm thick plaster in CM 1:4 mixed with and incl water proofing compound @3% by weight of cement on cleaned roof surface. After properly curing of the plaster, the roof will be tested for water tightening by ponding with water for 7 days for any seepage / leakage etc if any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5 Kg/Sqm using cement based cement grout. After the roof surface is repaired the slab/roof will be again tested for water tightness against before processing further treatment.(b) Properly cleaning and drying of the plastered roof surfaces, parapets, gutters, drain mouths, etc for all foreign matters such as fungus, moss, dust, etc by wire brushing and dusting. Proper grooves shall be cut around CI drain outlets /pipes / chimney pipes and other similar situations to tuck in the treatment.(c) Applying a coat of bituminous primer conforming to IS 3384-1965 @ 0.3 Kg/Sqm on the prepared surface till the surface is properly impregnated.(d) Laying APP modified water proofing membrane with 100mm overlap in longitudinal direction and 100mm overlap in transverse direction sealed and bounded to the surface by torch application method. Contd... Item no. 14.01 below

(e) All joints and changes in direction should be curved with cement mortar 1:3 with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. A fillet of PCC 1:2:4 type BO using 12.5mm graded stone aggregates shall be provided at all junctions of vertical and horizontal surfaces and wherever there is change of direction. (f) Topping will be done with precast machine pressed 20-22mm thick PCC tiles (using gray cement) of size 250 x 250 mm or 300 x 300 mm , conforming to IS-1237 (hydraulically pressed), laid over 15 mm thick cement mortar screed in CM (1:4), set & jointed in neat cement, joints of tiles shall be 2-3mm wide and grouted with chemical ‘Tile Grout” of M/s Asian Paints or equivalent as approved by GE. NOTE :- (i) Work of water proofing treatment shall be carried out by the authorised applicator of the manufacture. Necessary documentary evidence in support of the authorised applicator will be submitted to GE before the commencement of water proofing work. (ii) The quoted rates is deemed to include for the cost of scaffolding, T &P, etc required for execution of the work.

Demolition of Stone slabs and tiles laid bedded and jointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L for Light shade vitrified ceramic tiles, premium quality, coloured (of approved shade and design) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, joint free, as in floors and skirting, etc. set and jointed in neat cement slurry and joints grouted with epoxy grout of make Somany/ Dr fixit/ Bal endura with pigment to match with shad , laid over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for Modern design elevation tiles in vertical surfaces of extreme face of columns, facades etc of sizes 300x450x7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster in Cement mortar 1:4 as backing coat on fair faces on stone surface all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25 mm thick over 15 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10 mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as specified & directed.

M & L for Non-skid Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured in white or coloured cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6) complete all as specified and directed.

M&L glazed ceramic coloured tiles, size 450 mm X 300 mm, 6-7 mm thick on vertical surfaces of wall such as dados, skirting etc set & jointed in neat slurry and pointed in white or colour cement to match over 10 mm thick screed plaster in CM 1:4 complete all as specified and directed.

M&L Outdoor paving tiles of area of each tiles exceeding 0.08 sqm but not exceeding 0.36 sqm, , scratch resistant, stain resistant, impact resistant & acid/alkali resistant , to withstand heavy loads and neutral to sun up effect, complete all as specified and as directed.

M & L for 18-20 mm thick black granite on kitchen platform, window cill ,Jambs, vanity counters and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, moulding and polishing complete all as specified & directed.

Demolition of cement concrete (unreinforced ) in floors and pavings & exc 15cm thickness (above or below GL) complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20 mm thick crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for 100 mm thick,cement concrete type D-2, 1:4:8 (40 mm graded aggregate) complete all as specified and directed.

M&L 50 mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished fair even laid in alternate bays n.exc 2 m in length complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for 25 mm thick sand cushion laid over incluing vibrated with mechanical vibrator, complete all as specified and directed.

Dismantling structural steel work including doors gates but excluding framed truss etc complete all as specified and directed.

S&F Mild steel pipes/ rolled sections Fe 410 -W (Gde- E- 250) quality- A as in framing for cladding, rafters, purlins fixed with angle cleats or other connecting plates complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a priming coat of red oxide after preparation of new surfaces of steel of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and as directed.

M&L pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling Wall and ceiling boards/wall paneling (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Providing & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, including dismantling of old boards/ceiling board etc heights complete all as specified and directed.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specified and directed.

S&F solid PVC wall Lining/wall paneling consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and directed.

Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.

M&L for Random Rubble stone walling uncourses, built in CM (1:6) complete all as specified and directed.

M&L for Random Rubble walling uncourses, built in CM (1:6) but except stone complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, hammer dressing with maximum depression on face from straight edge held against the dressed surface n. exc 20 mm complete all as specified and directed.

M&L for old size brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

S&F in repairs fancy type ( Vitreous Ceramic ) EWC ) along with one piece EWC's with seat cover and twin flush fittings ( snow white or ivory or colour as approved by GE ) with Soft Close Seat Cover and Twin Flush Fittings 700 x 430 x 770 mm of flush tank with all necessary fittings with fixing arrangements and connecting to water pipe and WC etc including P or S trap fitting complete all as specified and directed.

S&F in repairs fancy type ( Vitreous Ceramic ivory or snow white ) pedestal pattern wall hung wash basins with full pedestal of size 615x510mm ( cat no CERA S 2040122) & pedestal ( S 2090107 ) complete set to fixed wall with all necessary fittings with fixing arrangements and connecting to water pipe with existing water system etc including suitable pillar tap fitting complete all as specified and directed.

S & F in repairs Table top wash basin with 32 mm C.P. brass waste coupling (Model No ALD-709 of Jaquar or similar),OR Equivalent with 15 mm nominal bore CP Single Lever Basin Mixer with pop up waste & 450 mm long braided Hoses (Model: no LYR-38051B of Jaquar or similar) make and model approved by GE including cutting and making good the walls wherever require complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site complete all as specified & directed and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) complete all as specified and directed.

M&L for aluminum powder coated door frame and shutter including top, bottom/middle rail using glazing clip including rubber head and float glass 6mm thick tinted provided with one floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty fixed to aluminum door and other fittings like handle, locking system, push plate and necessary beading all around the door shutter frame as required for resistance complete all as specified as per Chief Engineer Drg and directed.

M&L for aluminum powder coated sliding window, ventilator three track (2 Glass and 1 Wiremesh) sliding shutter 5mm thick tinted float glasses, necessary aluminum beadings fittings and other panels to prevent air from out side complete all as specified as per Chief Engineer Drg and directed.

S&F in repair aluminum grill with and including suitable aluminum anodized frame F/H section as required as per design No DG- 104 or equivalent 6.5 mm thick complete all as specified and directed.

S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate, hold fasts etc. complete all as specified. The rates include for one shop coat of priming and filling with PCC 1:3:6 complete all as specified and directed.

S&F Second class HW, plain, solid, straight chowkhats & frames including melamine polish, wrought, framed, rebated on the solid, rounded or chamfered, put together glue pinned at joints complete all as specified and directed.

S & F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels commercial type on both side and both face is covered with approved pattern with Decorative coloured laminate type 1 of 0.9 mm thick and all around side faces covered with 10mm thick 1st class hard wood lipping duly polished complete all as per specified and directed.

S&F 300 mm long Stainless steel sliding door bolt with hasp and staple (bolt type) and fixing clips complete all as specified and directed.

S&F 300 mm ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S & F in repairs 150 mm long dual leg floor door stopper of aluminum alloy body and tongue anodized with hard drawn steel spring fixing on door complete all as specified and directed.

S&F Solid PVC moulded Door Frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing using single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour ) PVC sheet on the front face & 2mm prelam (Nut Brown colour ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161 of SSR (Part -II ) 2020 complete all as specified and directed.

S&F 150 mm long aluminum anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long extruded aluminum alloy handles, fabricated type, anodized complete all as specified and directed.

S&F 100 mm butt hinges extruded aluminum alloy with galvanized mild steel hinge and anodized ISI marked and fixed complete all as specified and directed.

S&F in repair Deco door seal size 1.5" width door bottom sealing strip draft Excluder stopper with aluminum plate & nylon bristles for weather stripping complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

S&F in repairs 25 mm dia stainless steel curtain rod and decorative type knobs incluing curtain rod bracket complete all as specified and directed.

Taking down old unserviceable 15 mm GI tubing, fittings and connections and removing from site or keeping aside for re-fixing complete all as specified and directed.

Taking down old unserviceable 20 mm GI tubing, fittings and connections and removing from site or keeping aside for re-fixing complete all as specified and directed.

Taking down old unserviceable 25 mm GI tubing, fittings and connections and removing from site or keeping aside for re-fixing complete all as specified and directed.

S&F 15 mm GI water tubing( Concealed type), medium grade, galvanized with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.

S&F 20 mm GI water tubing, medium grade, galvanized with all fittings (and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.

S&F 25 mm GI water tubing, medium grade, galvanized with all fittings (and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.

Re-fixing old 15 mm GI tubing (Concealed type) galvanized with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.

Re-fixing old 20 mm GI tubing galvanized with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.

Re-fixing old 25 mm GI tubing galvanized with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.

S&F in repair tubular towel rail brass chromium plated 20 mm dia 'D' type 60cm long, complete all as sped & directed.

S&F in repair towel ring brass chromium plated, complete all as sped & directed.

S&F in repair Paper Holder brass chromium plated, complete all as sped & directed.

S&F in repair CP Amaze square shower with arm (8'' x 8'') complete all as specified and directed.

S&F in repair PVC Multi utility Mirror cabinet, complete all as specified and directed.

S&F in repair Glass corner shelf 300 mm with brass brackets complete all as specified and directed.

S&F in repair vitreous china white table top wash basins (660x430x140mm) and connecting pipe complete all as specified and directed.

S&F in repair health faucet cast copper alloy chromium plated with flexible chrome hose and wall hooks complete all as specified and directed.

S&F in repair cast copper alloy chromium plated bottle trap fixed to WHB and wall complete all as specified and directed.

S&F Rectangular LED Wall Mirror with Touch Sensor, 3 Light Modes & Backlit Illumination | Framed Bathroom & Bedroom Mirror, Wall Mounted (18x24 Inch) with frame, with chromium plated brass screws and cup washers fixed to wall complete all as specified and as directed.

S&F Casa Gold 36 Inch Golden Round Mirror in Steel Frame looking mirror with chromium plated brass screws and cup washers fixed to wall complete all as specified and as directed.

S&F in repair Soap dish fancy type, fixed to plugs with chromium plated brass screws embedded of sutaible size fixed in the wall complete all as specified and directed.

S&F in repair PVC connection, heavy duty 15 mm bore, 60 cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed.

S&F in repair, 15 mm bore Brass CP basin mixer for mixing hot & cold water for wash basin screwed down for iron pipe and fixed complete all as specified.

S&F in repair, 15 mm bore Brass CP wall mixer three in one system with bend set Telephonic shower and 1.5 m tube with stand, complete all as specified and directed.

S&F in repairs 15 mm bore cast copper alloy chromium plated fancy bib tap long body , screwed for iron pipe complete all as specified and directed.

S&F in repair fancy type angle valves 15 mm bore , cast copper alloy chromium plated, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

S&F mild steel framed work such as grills, grating cooler stands, water tank staging etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Taking down 100mm / 75mm dia AC/PVC/CI pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed. (Measured over all as fixed along the centre line over the fittings and accessories)

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new MS stack clamps of FI 50 x 3mm complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new MS stack clamps of FI 50 x 3mm complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap/ Nahani trap 75mm, plain with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) vent cowl ccomplete all as specified and directed.

Demolition and breaking up drain pipe SWG line set in CM of description, 150 mm dia including side packing / haunching complete all as specified and directed.`

M&L for PCC 1:3:6 type C-2 using 40mm graded aggregate for bed concrete to drain pipe packing under hunching for sides for 150mm dia SWG pipe lines complete all as specified and directed.

M&L for 150 mm dia in bore Reinforced concrete pipes, class NP 2 with one collar per length of pipe laid in trenches and jointed complete all as specified and directed.

M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipe they are laid with PCC 1:4:8 type D-2 for pipe of 150 mm dia in bore complete all as specified and directed.

Cutting into existing manholes for removing existing branch drain, making good to pipe and rendering cutting out branch channel, and making good benching for 150 mm bore pipe complete all as specified and directed.

Dismantling of existing unserviceable water tank of any description capacity exc 500 Ltr but n.exc 1000 ltrs capacity each complete all as specified and directed.

S& F rotational moulded synthetic (HDPE) water storage tank 1000 litre capacity hoisted & fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F ball valves PTMT high pressure with epoxy coated aluminum rod and high density plastic ball, screwed for iron pipe, 20mm bore compete (Minimum weight 210 gm) complete all as specified and directed.

S&F in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 20 mm dia, ISI marked complete all as specified and directed.

Providing and fixing wall paper on wall with approved adhesive as per approval and instructions of the Architect/Engineer-in- charge complete all as specified and directed.

M&L for precast cement concrete louvers and jallies 35 mm thick made in Mix 1:2:4 type B0 using 12.5mm graded stone aggregate set in cement mortar 1:4 and jallies design as per site requirement incluing dismaintling of ol jallies complete all as specified and directed.

Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including providing and fixing partition at top & bottom with aluminum channel etc complete all as specified and directed.

M&L for Post Construction Anti Termite Treatment by injecting recommended chemicals after proper surface preparation, drilling of plinth floor/wall, inside floor/wall, door/windows etc at the recommended level along the junction of walls and floors at an interval of about 300 mm, caping and sealing the drill holes with white cement or grouts to create a chemical barrier along the internal perimeter and wood-based materials, structures of the building to eliminate existing termite infestation and to make it resistant from termite attack on the path of termites seeking entry to the building including all cost of materials, chemicals, medicines, labour T&P, PPEs etc. complete and thorough cleaning & housekeeping of the area after application complete all as specified and directed.

Fabrication & fitting of kitchen with cabinet/shelves & wardrobe/cupboard made out of 18mm thick (one side decorative lamination & other side baancing lamination) PVC sheet with piano hinges including providing cabinet for keeping baskets / cutlery basket with handles/door shutters complete all as specified and directed. Note :- PVC sheet, fitting & fixture will be measured and paid separately.

S&F in repairs 18 mm thick (one side decorative lamination & other side baancing lamination) solid PVC board with cement solvent adhesive for shutter/kitchen cabinet / cup board/partition wall/ wall cabinet complete all as specified and directed.

S&F in repairs soft close clip on hinge bright finish complete all as specified & directed.

S&F in repairs 125 mm dia oval shape brass handle fancy type bright finish complete all as specified & directed.

S&F in repairs stainless steel basket (plain) of approved quality of size 520 X 485 X 100mm complete all as specified and directed.

S&F in repairs stainless steel plate basket of approved quality of size 520 X 485 X 150mm complete all as specified and directed.

S&F in repairs basket / trolley channel 50cm long extruded MS galvanized over roller complete all as specified and directed.

M & L for rough cast plaster over 10 mm thick cement plaster in cement mortar 1:4 on stone / brick masonary wall surfaces complete all as specified and directed.

M & L preparation old decorated surfaces of walls and providing two coat of cement base paint complete all as specified and directed.

M&L For roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M & L for Non-skid Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured in white or coloured cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6) complete all as specified and directed.

All as per the item No 125.00 above but as in skirting 10 mm screed plaster in CM 1:4 etc complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S & F second class HW Hollock/Bonsum/Sal 35mm thick, factory made, plain framed, paneled shutter (Three panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as per specified and directed.

S&F Steel window/ ventilator glazed and gauged (combination) with side hung/ top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame complete incl necessary AC/Cooler arrangement in window & guard bars complete all as specified & directed. Note :Wire mesh and sheet glass shall be measured & paid separately under respective items.

S&F in 300 mm aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed.

S&F for 125 mm Double action spring hinges, mild steel with steel wire spring, stove enamelled, black complete all as specified & directed.

M & L for preparation of new wooden surface over 10 cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer complete all as specified and directed.

S&F 3.00 mm thick sheet glass, ordinary / figured quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as specified and directed.

S&F decorative type knobs with bracket of SS fixing at end of pelmet/curtain rod complete all as specified & directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

Disconnecting and taking down unserviceable sub main wiring of any size including steel/PVC conduit and accessories & removing from site and making good the disturbed surfaces, complete all as specified and directed.

Taking down carefully by unscrewing from boards / outlet boxes, fittings and fixtures such as switches, sockets etc for re use at site or carrying to the store(To be measured only when found serviceable in all respects complete for re use.) complete all as specified and directed

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box and modular white cover plate with frame for suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for the following complete all as specified and directed:

One light point controlled by one way switch.

One ceiling fan/wall fan/exhaust fan controlled by one way switch.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board.

All as per the item No 138.00 above but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth complete all as specified and directed.

S&F of modular switch 1 way 6/10 Amp, 1 module, complete all as specified and directed.

S&F of modular switch 1 way 16 Amp, 1 module, complete all as specified and directed.

S&F of modular socket 6 Amp, 2/3 pin combined 2 module complete all as specified and directed.

S&F of modular socket 16 Amp, 2/3 pin combined 2 module complete all as specified and directed.

S&F stepped type ceiling fan regulator, 230 volt AC, 2 module, complete all as specified and directed

S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm complete all as specified and directed.

Taking down existing exhaust fan & wall mounted fan and re use at site or carrying to the store(To be measured only when found serviceable in all respects complete for re use.) complete all as specified and directed.

S&F exhaust fans AC single phase 230V/240V of size 300mm sweep PVC body with louver including connecting with three core flexible copper wire from ceiling rose to connector of fan including opening for exhaust fan and making good complete all as specified and directed.

S & F for of ventillation fan 300 mm sweep non metallic white colour including connecting with three core flexible copper wire from ceiling rose to connector of fan complete all as specified and directed. .

S&F of lamp holder PVC/polycarbonate type with back plate complete all as specified and directed.

S&F LED box type tube light fitting 20 watt made up of CRCA sheet with pre wired double sided connections including 1x20 watt retrofit LED tube rod with extruded aluminium body, PC diffuser and inbuilt driver, double sided connection, complete with all accessories internally prewired complete all as specified and directed.

S&F ceiling fan, 1200mm sweep, 230 Volts, 50 Hz copper winded motor BEE 5 star rated white colour complete with motor, blades set of three, down rod, canopy & shackle assembly including and connecting three three core round sheathed PVC insulated flexible wire with multistandered copper conductor provided for ceiling rose to connector of ceiling fan and writing MES Number with black enamel paint complete all as specified and directed.

Supply and fixing wall mounted decorative luminarie fitting suitable up to 9/10 Watt LED lamp champagne gold finish fixture with plastic/glass body suitable for B22 Base in warm white or cold white complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp in warm white and cold white including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED bulk head luminaire 1x 10 W bulk, IP 65 protection complete with all accessories and including connecting up with three core copper conductor cable complete all as specified and directed.

S & F of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact corrosion resistant including thermal management in multiple optics alongwith bracket made of 32 mm GI pipe 1.2 mtr length complete with IP 65/66 protection complete all as specified and directed.

S&F LED 2 way ligh tfitting, 6 watt, in cool day/warm white IP 65 Aluminium Die cast complete with all Each accessories pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed.

S&F decorative light Crystine pedat 1LS E27 BS BRS RD light alongwith canopy in Brass finish down light to cast light downwards in cool day/ warn white complete with all accessories pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing in repair recess mounted 2' x 2' LED luminarie 36 watt, cool day/warm white light with white powder coated CRCA housing with LED driver, lumen efficacy >100 Lm/w complete all as specified and directed.

M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 6 Sqmm multi stranded copper conductor cable drawn through and including 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of green colour earth continuity conductor with 6 Sqmm multi stranded copper conductor cable, in concealed conduit in wall/ roof/ ceiling, complete all as specified and directed. Note : - Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length.

M & L for submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 4 sqmm multi stranded copper conductor cable drawn through and incl 25 mm dia PVC non metallic rigid concealed conduits and the conduits accessories incl one run of green colour earth continuity conductor with 6 sqmm multi stranded copper conductor cable. Make of PVC conduit - Polycab/ Finolex/Legrand-MDS Note : - Two run of single core cable, one run of earth continuity conductor and 1 mtr PVC conduit shall be measured as one unit length.

M& L for TV Socket incl PVC conduit and co axial cable wire complete all as specified and directed.

M& L for Telephone socket incl PVC conduit and telephone wire complete all as specified and directed.

S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP `C' series for AC complete all as specified and directed.

Taking down and Supply and fixing of Change over Three Pole Neutral AC 100 Amp, with bolted type fuse in sheet enclosure with fuses complete all as specified and directed.

S&F wall fan of size 300 mm sweep, Speed upto 2100 RPM, Air Delivery 90 CMM, 230/240 volts including connecting with three core flexible copper wire from ceiling rose to connector of fan complete all as specified and directed.

Supply and fixing in repair surface mounted LED downlight 18 watt round shaped , Slim surface mounted LED panel with cool day /warm/white light premium diffuser to ensure glare free & even light distribution complete all as specified and directed.

S&F storage water heater (geyser) 25 litre capacity electric operated 230 volt including connecting inlet/outlet/vent pipes, electric earth connection, mounting bolts, nuts and carrying out testing for proper functioning complete all as specified and directed.

S&F of vertical TPN distribution board , IP-43 double door metal, 4 way , made out of CRCA sheet steel , factory made powder coated with insulated vertical phase bus bars , shrouded neutral bars, earth bars, colour coded interconecting wire set , blanking plates suitable for up to 125 amp MCCB's as incomer and MCB's SP/TP as outgoing complete all as specified and directed.

S&F of MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 8 way, 240 volts suitable for housing MCB's including blanking plate complete all as specified and directed. Note:- MCB DB and MCB will be same make.

S&F of MCB distribution board TPN 4 way, 415 volts, double door, with 200 Amps rated bus bar, neutral bar with shrouds, earth bar, IP-43 , made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCBs as incomer and outgoing including blanking plate complete all as specified and directed.

S&F of MCB TPN, 415 volt, 100 Amp capacity,415 volts, complete all as specified and directed.

S&F in repairs MCCB, 100 Amp, 4 Pole, 25 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , including spreader terminals and phase barriers complete all as specified and directed.

S&F of MCB SP, 240 volt, 6 Amp to 40 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

S&F of MCB SP, 240 volt, 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

S&F of MCB SPN, 240 volt, 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

S&F of MCB TPN, 240 volt, 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore GI med grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover with handle complete all as specified and shown in elect plate No 3 of SSR Part-I of 2009 incl dismantling of old unsv existing earthing complete all as specified and directed..

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed..

Supply and fixing tubes light grade Gl tubing 40 mm dia with all fitting laid in trenches, fixed on pole/on wall for cable protection complete all as specified and directed..

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc, or for shafts, wells, cesspits, manholes. pier holes, etc. or for cable laying or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose/ hard/ dense soil complete all as specified and as directed.

Removing excavated material (soils) not exceeding 50 m and depositing where directed at a level n exc. 1.5 m above the starting point

Supply & spreading in trenches dry river sand cushioning to underground C cable in trenches including spreading, levelling hand punning down complete all as specified and directed Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly.

M & L for laying of bricks locally available sub class 'B' bricks, non-modular sizes as per IS 1077: 1992 for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and as directed.

BSB CONSTRUCTION COMPANY (BID ID -3415892)

Shree Sai Ram Enterprises (BID ID -3416799)

M/s M K Associates (BID ID -3417743)