COMPREHENSIVE MAINT OF INTERNAL ELECTRIFICATION CEILING FAN EXHAUST FAN RE WIRING AND ALLIED WORKS AT MH AND RAIPUR SATWARI UNDER GE SATWARI

Amount

The contractor shall attend to the office of Engr-in-Charge daily in person or through his authorised representative with necessary T&P and collect the day to day complaint with respect to the area of contract against respective Item.

NOTE: (i) The contractor shall maintain a regular sufficient manpower to attend all the complaints provided by JE/Engr-in-Charge on day-to-day basis. The non adherence to this condition shall lead to recovery of Rs. 300/- per day for each complaint pending for more than 24 Hrs. (ii) Rate of other items like screws, nuts, insulation tape, copper wire of diferent size upto 01 mtr length etc are covered under Item No. 3 to 25, 66-82, 118-119.

Supply and fixing in replacement of day to day complaint switch piano flush button single pole one way, 6 Amps, 240 V complete. Make: As per existing

Supply and fixing in replacement of day to day complaint bell push piano flush type 6 amps , 240 V complete.Make: As per existing

Supply and fixing in replacement of day to day complaint buzzer door bell, AC 230 volts Single Phase complete.

Supply and fixing in replacement of day to day complaint socket outlet 2-in-1 5 pin, 6 Amps flush type complete all as specified and as directed. Make: As per existing

Supply and fixing in replacement of day to day complaint Switch socket combination 2-in-1 5 pin 6 Amps flush type complete all as specified and as directed. Make: As per existing

Supply and fixing in replacement of day to day complaint Switch piano flush button single pole one way, 16 Amps, 230/240 V complete. Make: As per existing

Supply and fixing in replacement of day to day complaint Socket outlet 2-in-1 5 pin, 6 & 16 Amps flush type complete all as specified and as directed. Make: As per existing

Supply and fixing in replacement of day to day complaint Switch socket combination 5 in 1, 6A and 16 Amps flush type universal controlled by one switch complete.Make: As per existing

Supply and fixing in replacement of day to day complaint Fan regulator socket type stepped type (electronic ) for 1200/1400mm sweep AC ceiling fan complete.Make: As per existing

Supply and fixing in replacement of day to day complaint modular type switch, one way 6 Amps , 1 module complete all as specified and directed. Make: As per existing

Supply and fixing in replacement of day to day complaint modular type socket 5 pin, 6 Amps combined 2 module complete all as specified and directed. Make: As per existing

Supply and fixing in replacement of day to day complaint modular type socket 5 pin, 6 /16 Amps combined 2 module complete all as specified and directed. Make: As per existing

Supply and fixing in replacement of day to day complaint modular type switch, one way 16 Amps, 1 module complete all as specified and directed. Make: As per existing

Supply and fixing in replacement of day to day complaint PVC plug top 3 pin with easy grip white matte finish tested as per IS 1293, 6 Amp capacity ISI marked all as specifed and directed.

Supply and fixing in replacement of day to day complaint PVC plug top 3 pin with easy grip white matte finish tested as per IS 1293, 16 Amp capacity ISI marked all as specifed and directed.

Supply and fixing in replacement of day to day complaint metalic plug top 3 pin with easy grip white matte finish tested as per IS 1293, 15/16 Amp capacity ISI marked all as specifed and directed.

Supply and fixing in replacement of day to day complaint fan capacitor 2.15 mfd to 2.5 mfd all as specifed and directed.

Material and labour in replacement of day to day complaint modular sheet cover plate with frame of size 8-12 module including necessary electrical connection as per existing point wiring all as specifed and directed.

Material and labour in replacement of day to day complaint modular sheet cover plate with frame of size 6 module including necessary electrical connection as per existing point wiring all as specifed and directed.

Material and labour in replacement of day to day complaint modular sheet cover plate with frame of size 3 module including necessary electrical connection as per existing point wiring all as specifed and directed.

Material and labour in replacement of day to day complaint GI/pressed steel terminal switch board of size 8-12 module including necessary electrical connection as per existing point wiring all as specifed and directed.

Material and labour in replacement of day to day complaint GI/pressed steel terminal switch board of size 4-6 module including necessary electrical connection as per existing point wiring all as specifed and directed.

Material and labour in replacement of day to day complaint GI/pressed steel terminal switch board of size 1-3 module including necessary electrical connection as per existing point wiring all as specifed and directed.

Taking down carefully aluminium conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

M&L for complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS insulated and sheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm multistranded copper conductor FRLS insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into GI/pressed steel modular terminal boxes including modular switch cover IS marked for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed for the following :- One light / fan point controlled by one, one way switch 6 Amp complete.

Ditto but one 3 pin modular socket outlet 6 amp independent board.

Ditto but one 3 pin modular socket outlet 6 amp on same board.

Ditto all as per item No 27.00 but one 3 pin 6 Amps modular socket outlet independent but below the switch board of light points in the same vertical plane.

One bell/ buzzer point controlled by one push button on same board with other switches or independent with cable 1.5 sqmm size complete all as specified and directed.

Ditto all as per srl item No 27 above but for one 3 pin modular socket outlet 15/16 Amps independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

M & L in replacement of point wiring complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in existing concealed / surface PVC/Steel conduit and including terminated into suitable module Modular Metal flush Boxes of Make : Elvira Indoasian or equivalent in List of makes. including white cover plate with frame as per relevant IS for mounting switches, sockets, fan regulators etc complete all as specified and as directed for One light point controlled by one 6 Amps one way switch.

All as per above item No-33 but One ceiling Fan, Exhaust Fan point controlled by one 6 Amps switch.

All as per above item No-33 but One bell/buzzer point controlled by one bell push button on independent.

All as per above item No-33 but One light point controlled by 2 Nos ,6 amps Two way switch.

All as per above item No-33 but One 3 pin socket out let 6 Amp point on independent board

All as per above item No-33 but One 3 Pin socket out let 6 Amp point on the same board with other switch.

All as per above item No-33 but with 2.5 Sqmm cable for 16 Amps switch sockets out let point on independent board including 2.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor.

S&F switch modular one way 06 Amp,1 module all as specified and directed.

S&F switch modular one way 16 Amp,1 module all as specified and directed.

S&F Modular socket 6A-2/3 Pin 2 module 230V AC all as specified and directed.

S&F Modular socket 6A/16A-3 Pin 2 module 230V AC all as specified and directed.

S&F modular bell push type one way 6 Amp 1 module all as specified and directed.

S&F modular type fan regulator 2 Module all as specified and directed.

S&F 1 module blank all as specifed and directed.

M&L for complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS insulated and sheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm multistranded copper conductor FRLS insulated drawn in and including PVC rigid conduit medium grade ISI marked terminated into GI/pressed steel terminal boxes including 3 mm thick hylam sheet cover to mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :- One light/fan point controlled by one, one way switch 6 Amp complete.

Ditto all as per srl item No 47 above but one 3 pin socket outlet 6 amp independent board.

Ditto all as per srl item No 47 above but one 3 pin socket outlet 6 amp on same board.

Ditto all as per srl item No 47 above but one 3 pin 6 Amps socket outlet independent but below the switch board of light points in the same vertical plane.

One bell/ buzzer point controlled by one push button on same board with other switches or independent with cable 1.5 sqmm size complete all as specified and directed.

Ditto all as per srl item No 47 above but for one 3 pin socket outlet 15/16 Amps independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

S&F switch piano flush button polycarbonate single pole one way 6 Amps, 240 V.

S & F switch piano flush button polycarbonate single pole one way 16 Amps, 240 V.

S & F bell push piano flush type polycarbonate 6 amps, 240 V.

Supply and fixing bell Ding Dong AC 230 volts Single Phase all as specified and directed.

S&F socket outlet 2-in-1 5 pin, 6 Amps flush type polycarbonate complete all as specified and directed.

S&F socket outlet 2-in-1 5 pin, 15/16 Amps flush type polycarbonate complete all as specified and directed.

Supply and fix Fan regulator socket type stepped type (electronic) polycarbonate for AC ceiling fan all as specified and directed..

Supply and fixing ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.

Supply and fixing lamp holder, Polycarbonate type with back plate suitable for batten fittings all as specified and as directed.

Supply and fix in replacement of LED lamp suitable for B22 holder of capacity 7 Watt.

Supply and fixing LED light fitting 1 x 20 Watt, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fix in replacement of existing unserviceable T/L fitting on existing wall with New LED Batten for T - 8 LED tube light 18/20 watts with necessary braket,clamps ,incl. bolts, nuts & washers for fixing arrangement etc complete all as specifed and directed by Engineer-in-charge.

Supply and fix in replacement of LED tube rod light 18/20 watts T -8 with necessary fixing arrangement etc complete all as specifed and directed by Engineer-in-charge

Supply and fix in replacement of High efficacy 4' x 1' recess LED flat panel with high brightness LED for glare-free homogenous illumination also for POP ceilings (supplied with wedge brackets) complete with all accessories including necessary connection all as specified.

S&F LED wall mounted tube light fitting 10W 3000K complete including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed.

Supply and fix Street light fitting LED type 35 Watt 230 V AC outdoor type with high pressure die cast alumium hosing and heat resistent complate with driver, lamp holder, lamp bracketwith impact and corrosion resistent including thermal management in multiple optics complete with IP 66 protection complete with GI pipe bracket of reqd length and dia, MS Clamp, Nuts, Bolts & washer) with high power pressure die cast aluminium housing complete with all accessories.

Supply and fix Street light fitting LED type 60 Watt 230 V AC outdoor type with high pressure die cast alumium hosing and heat resistent complate with driver, lamp holder, lamp bracketwith impact and corrosion resistent including thermal management in multiple optics complete with IP 66 protection complete with GI pipe bracket of reqd length and dia, MS Clamp, Nuts, Bolts & washer) with high power pressure die cast aluminium housing complete with all accessories.

Supply and fixing building flood light LED type 70/80 watt, IP66 with high power LED floodlight with pressure die cast aluminium housing complete with all accessories.

S&F LED luminaire 600 mm X 600 mm 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cases of suitable size complete.

Supply and fixing round shape 12 watt 220 Volts AC recessed type with high efficiency PMMA diffuser sift glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cases of suitable size complete.

Supply and fixing round shape 15 watt 220 Volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cases of suitable size complete

Supply and fixing in replacement of Fancy type LED fitting 1x7 Watts E27 LED light frosted glass with chrome finishing wall lamp fixture height 250mm complete all as specified and directed.

Supply and fixing in replacement of Fancy type LED fitting 2x7 Watts E27 LED light frosted glass with chrome finishing wall lamp fisture hight 240mm complete all as specified and directed.

Supply and fixing in replacement of Fancy type LED fitting 1x4/7 Watts E14 LED light opal glass with chrome finishing wall lamp fixture height 235mm complete all as specified and directed.

Supply and fixing in replacement of foot light for step stair desk LED fitting 1x4/7 Watts, 4/5 Modulars warm white finishing complete all as specified and directed.

Supply and fixing of energy saving new generation Astra spot round LED light white color 25-30W wall /ceiling mounted adjustable type single fitting with opal diffuser complete all as specified and directed.

Supply and fixing of energy saving new generation Astra spot round LED light white color 25-30W wall /ceiling mounted adjustable double fitting type with opal diffuser complete all as specified and directed.

S&F Vertical Distribution Board (TP&N) 4 way double door suitable for MCCB 3/4 pole of cap upto 125 Amp as incomer and out going MCBs SP and should be IP 43 protected with Copper Bus Bars, Neutral Links, Earthing bar all as specified and directed.

S&F MCCB four pole 100 Amp, 16 KA, 415 volts with adjustable thermal settings all as spcified and ditected. Note: TPN DB and MCCB should be of same make.

Supply & fix in replacement of Distribution Board MCB TPN 4 way double door suitable for and including MCB four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. including taking down old UNSV DB/MCB any type. Makes: Legrand/IndoAsian Optipro/Schnider Note:- (i). MCBs shall be measured and paid separately. (iii) TPN DB and MCB should be of same make.

Supply & fix in replacement of sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification.

All as per item No 84 but 8 Way double door

All as per item No 84 but 4 Way double door

Supply & fix in replacement of MCB Four pole 415 volt 40-63 Amps 415V 10KA 'C' curve miniature circuit breaker for inductive load connected through cable lugs of suitable size complete all as directed and specified.

Supply & fix in replacement of MCB Single pole and neutral 240 volt 40 Amp for inductive load connected through cable lugs of suitable size complete all as directed and specified.

Supply & fix in replacement of MCB Single pole and neutral 240 volt 32 Amp for inductive load connected through cable lugs of suitable size complete all as directed and specified.

Supply & fix in replacement of MCB single pole (SP) 240 volt 06-32 amp for inductive load connected through cable lugs of suitable size complete all as directed and specified.

S&F distribution board single door two way without bus bar complete suitable for mounting MCB all as specified and directed.

Supply & fix in replacement of sheet metal enclouser with Single pole and neutral SPN MCB DB complete with single door with 240 V 50 Hz.

Supply & fix in replacement of MCB Single pole and neutral 240 volt 25-32 Amp for inductive load connected through cable lugs of suitable size complete all as directed and specified.

S&F sub main wiring with single core cable 4 x 10 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x10 Sq mm FRLS insulated unheathed stranded copper conductor cable as earth wire connected with main earth dolly including chiseling, cutting & making good to match with the existing surface incl taking down complete all as specified and directed.

All as per item No 94 above but 4x6 sq mm and 1x6 sq mm as earth wire

All as per item No 94 above but 2x10 sq mm and 1x10 sq mm as earth wire

All as per item No 94 above but 2x6 sq mm and 1x6 sq mm as earth wire

All as per item No 94 above but 2x4 sq mm and 1x4 sq mm as earth wire

S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminum conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat or circular of size 10 Sqmm incl taking down old service connection and removing from the side complete all as specified and as directed.

All as per ser item No 99 above but 16 sqmm twin core service wire.

Taking down the defective ceiling fan of any sweep and make after disconnecting electrically & mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following:- (a) Servicing/overhauling the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the insulation value complete.(b) M& L for opening, cleaning, drying and re-winding the burnt/short circuited winding with same guage supper enameled copper wire to maintain speed at load. (c) M&L for preparing surface scrabing, finishing and Painting of ceiling fan by applying one coats of synthetic enamel paint after preparation of surface complete. (d) Replacement of ball bearing suitable for ceiling fans existing sweep & Make/Model

All as per ser Item No 101 above for exhaust fan/Wall mounting fan/Pedestal fan of size 300-450 MM sweep, any make, single phase, 230 volts, 50 HZ, AC complete.

Supply & fixing in replacement of ball bearing suitable for ceiling fans 1200 / 1400mm dia sweep.

Supply & fixing in replacement of ball bearing suitable for exhaust fans 300/450mm dia sweep.

Supply & fixing in replacement of Capacitor 2.5 mfd for ceiling fans.

Supply & fixing in replacement of Capacitor 4 mfd for exhaust fans.

Supply & fixing in replacement of gun metal bush suitable for ceiling fans of 1200/1400 mm sweep.

Supply & fixing in replacement of gun metal bush suitable for exhaust fans of 300/450 mm sweep.

Supply & fixing in replacement of three core flexible wire 1 Sqmm for connecting up ceiling fans , exhaust fans/wall mounting fan etc.

Supply & fixing in replacement of the wheel type rubber bush with nut,bolt,washers,locking clip etc. suitable for hanging the ceiling fans

Supply & fixing in replacement of the mounting clamps with nut, bolt, washers, locking clip etc complete suitable for fixing at the top of down rod suitable for fixing the ceiling fan.

Supply & fix in replacement of ceiling fan down rod of MS pipe 15mm bore 1.2/1.5 Mtr length including cutting/threading making tide for fixing providing check nuts wachers and clamp with rubber bush etc complete.

Supply & fix in replacement of Casing Caping of size 20 mm, ISI marked complete all as specified.

Supply and fix exhaust fan made of steel body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified.

M & L in replacing of electronic LED driver 29W to 36 Watt for panel type fitting of suitable size as per existing model complete all as specified.

M & L in replacing of LED driver 9/10/11W/15W/20W fitting of suitable size as per existing model complete.

M & L for galvanised steel earthing complete with 60 cm x 60 cm x 6 mm thick galvanised steel earth electrode and 04 mm dia galvanised earth lead wire burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to earth lead 4.0 mm dia GI wire protected by 15 mm bore light grade galvanised iron pipe and other and connected to test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron wire mesh, charcoal and common salt in alternater of 15 cm complete thickness all around the GI plate electrode complete with earth pit PCC 1:3:6 type CI and RCC cover and necesary excavation and earth work in hard/dense soil and disposal of spoil to a distance not exc 50 mtr and necessary testing complete all as shown in electorical plate No 03 connected to earthing test point including following elements/works all as specified.

Taking down the existing conduit and copper wire before Supplied & fixed in replacement of Rigid non-metallic PVC conduit of size 20mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, after fixing of conduit inserting the existing copper wire and connection as per existing complete all as specified and directed etc.

BMMJ TRADERS AND ENGINEERS