CA NO GE/C-80/2020-21 CERTAIN REPAIR/REPLACEMENT OF JOINERIES PVC DOORS PLASTERING, FLOORING AND ALLIED WORKS AT NEW PRATAP CHOWK MD ACCN OTM ACCN ARJAN VIHAR AND OTHER ADJOINING AREA OF AGE B/R II UNDER GE ( CENTRAL) DELHI CANTT-10

Amount

Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified by Engineer-in-Charge.

Taking down chowkats or frames exc. 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutters from frames ), complete all as specified by Engineer-in-Charge.

S&F powder coated aluminum frames for windows/ventilators with one or more rebates including jointing cleats for fixing incl aluminium grill cutting/opening for AC and coolers etc complete all as specified by Engineer-in-Charge.

S&F Powder Coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified by Engineer-in-Charge.

M & L for powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.) complete all as specified by Engineer-in-Charge.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with steel wire staples, complete all as specified by Engineer-in-Charge.

S&F 4.00 mm thick plain sheet glass and glazing with oil putty in square n.exc 0.5 Sqm in each pane, complete all as specified by Engineer-in-Charge.

S&F 4.00 mm thick figured glass, pin head type and glazing with wooden beads, glass putty, PVC beading, aluminium beads, complete all as specified by Engineer-in-Charge.

M&L for Black Granite slab 18 to 20 mm thick rubbed and polished machine cut laid single piece, set in cement mortar jointed with white cement complete including bedding layer 15mm thick in cement mortar 1:6 over window cill incl moulding of exposed edges, complete all as specified by Engineer-in-Charge.

Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish,vegitation outside complex (MOD land), complete all as specified by Engineer-in-Charge.

M&L for coloured glazed ceramic tiles 200 x 300 x 5.5mm or 300x450 x 7 to 8mm or 300x600 x 7 to 8mm thick as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified by Engineer-in-Charge.

M & L for 15 mm thick internal rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement, complete all as specified by Engineer-in-Charge.

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper(white or tinted) over a coat of chalk whitning wall putty on plastered surfaces, complete all as specified by Engineer-in-Charge.

M&L for Preparation of old decorated surfaces(Plastered or unplastered) of wall including cornices, pillasters etc by complete removal of existing treatment over a coat of chalk whitening wall putty and applying two coats of white lime washing, complete all as specified by Engineer-in-Charge.

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each, complete all as specified by Engineer-in-Charge.

S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face pannel, both face is covered with decorative face veneer with lipping/frame to match both sides. Flush shutters shall have teak wood edging ccomplete all as specified by Engineer-in-Charge.

S&F 35mm thick flush shutters factory made solid core construction with block board core and ply wood face panels commercial type on both sides with teak wood edging incl Material and labour for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified by Engineer-in-Charge.

Supply and fix 35 mm thick second class hard wood plain framed factory made panelled shutter (two panel) with lock rail and panel 9mm B.W.P commercial ply the size of rail and style as per IS 1003/SSR part -1 incl Material and labour for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified by Engineer-in-Charge.

S & F factory made Glazed and skelton shutters 35mm thick 2nd class hard wood open rebated and prepared to receive glass, gauge etc edges of framing plain champered or rounded fitted with cut & metered beads for securing glass etc sized of membere shutter as specified in SSR Part I Section 8, Clause 8.24 (a) supplied and fitted to chowkhats incl Material and labour for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified by Engineer-in-Charge.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement. The door frame shall be fixed to wall using 8/100mm long M.S Screwsthrough the frame by using PVC fasteners. A minimum of 4 nos. of screws to provided for each vertical member & minimum 2 nos. for horizontal member etc complete all as specified by Engineer-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube,

Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified by Engineer-in-Charge.

S& F 25 mm thick flush shutters solid core construction, with block board core and plywood face panel, commercial type on both sides complete all as specified by Engineer-in-Charge.

M&L for 18/19mm thick block veneered board core grade 2 quality,interior grade,commercial type, fixed with screws to timber frame work as in cup board shutter, loft shutters incl 15mm thick teak wood leaping and necessary rebating for leaf shutters where required including polishing to leaping/rebating complete all as specified by Engineer-in-Charge.

S&F 18/19mm thick factory made PVC moulded solid board one side pre-laminated for cabinet boxes, crockery almirahs, books shelves etc with self and shutter full size fitted under/above the kitchen cooking platform and other rooms directed incl provn of fixing arrangement etc, complete all as specified by Engineer-in-Charge.

S&F 100 mm long (size) butt hinges, medium weight, cold rolled mild steel, complete all as specified by Engineer-in-Charge.

S&F in repairs 100 mm long (size) butt hinges, medium weight cold rolled stainless steel ISI marked complete all as specified by Engineer-in-Charge.

S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm, complete all as specified by Engineer-in-Charge.

S&F 75 mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all as specified by Engineer-in-Charge.

S & F150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black, complete all as specified by Engineer-in-Charge.

S & F 300 mm long, Mild Steel sliding door bolts,plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified by Engineer-in-Charge.

S&F 300mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified by Engineer-in-Charge.

S&F in repair 300mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified by Engineer-in-Charge.

S&F 150mm long mild steel barrel tower bolts stove enamelled black with bright bolt & fixed with screws, complete all as specified by Engineer-in-Charge. .

S&F 150mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified by Engineer-in-Charge.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified by Engineer-in-Charge.

S & F in repair 200mm long (size) aluminium anodised, barrel tower bolt of extruded section and fixed, complete all as specified by Engineer-in-Charge.

S&F 150mm size mild steel pressed handles, oval type, stove enamelled black complete all as specified by Engineer-in-Charge.

S&F 150mm size extruded aluminium alloy handle, fabricated type, anodised, complete all as specified by Engineer-in-Charge.

S&F in repair floor door stopper aluminium body double tounge anodised with hard drawn steel spring 140mm long complete all as specified by Engineer-in-Charge.

S&F Hasp and staple, 75mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate & fixed with screws, complete all as specified by Engineer-in-Charge.

S&F in repair Hasp and staple, 75mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate & fixed with screws, complete all as specified by Engineer-in-Charge.

S&F in repairs 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts , screw and washer of mild steel bright finished , complete all as specified by Engineer-in-Charge.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified by Engineer-in-Charge.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed stainless steel wire staple, complete all as specified by Engineer-in-Charge.

Hacking out old broken glass of any thickness size quality or description from wooden frames /Aluminium frame fixed with wooden beads/aluminium beads incl Supply and fixing in repair 4.00 mm thick sheet galss ordinary quality and glazing with wooden bead/aluminium beads, complete all as specified by Engineer-in-Charge.

S&F mild steel 150mm ordinary rat tail , rod pattern springs including roller and roller plate complete all as specified by Engineer-in-Charge.

S&F in repair mild steel 150mm ordinary rat tail , rod pattern springs including roller and roller plate complete all as specified by Engineer-in-Charge.

Dismantling of existing wooden pelmet box of any description and size and making good the disturbed surface to match with the existing complete all as specified by Engineer-in-Charge.

S & F drapery curtain rods decorative type stainess steel 25 mm nominal dia of approved quality incl fixing of two number decorative brackets fixed in brick/concrete wall with finished knobs/latto on each end of curtain rod complete all as specified by Engineer-in-Charge.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified by Engineer-in-Charge.

M&L for 1.20m x 1.20 m x 16-18mm thick machine cut udaipur green stone flooring over and including 20mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing, laid in designed complete all as specified by Engineer-in-Charge.

M&L for 16-18mm thick Udaipur green marble laid over and including 15mm thick screed bed in CM 1: 6 as in treads/risers of steps in one piece including cutting, jointing, moulding and granite polishing, laid in designed complete all as specified by Engineer-in-Charge.

S&F in MS Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe -290 Gde E-165 for door frame complete all as specified by Engineer-in-Charge.

M & L for preparation of newly plastered external wall/ceiling surfaces of walls and applying two coats of weather proofing exterior acrylic emulsion paint premier quality on wall surface over one coat of primer applying 2mm thick wall care putty over from the same manufacturer complete all as specified and directed upto a height of G+5 Note:- Contracter has to render a FDR @ 10% for the respective item for the period of 5 years

M&L for preparation of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vacuum mechanisum) having RPM not less than 1500, sanding pad of 80 grit having dia of 7''/9'' to make the surface free from dust, loose paint etyc or equivalent makes or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two coats of wheather proofing exterior acrylic emulsion paint over priming coat premium quality on wall/ ceiling surface including applying 2mm thick wall care putty over disturbed surface during preparation of any reason, sand papering thus make surface smooth and for above G+5 Buildings complete all as specified and directed. Note : Stage for Preparation of surfaces shall be got approved from GE before applying the finishes. Material shall be procured from manufacturer and work shall be got executed through authorised applicator Note:- Contracter has to render a FDR @ 10% for the respective item for the period of 5 years

M&L for preparation of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 ( having mechanical vacuum mechanisum) having RPM not less than 1500, sanding pad of 80 grit having dia of 7''/9'' to make the surface free from dust, loose paint etyc or equivalent makes or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying One coats of wheather proofing exterior acrylic emulsion paint over priming coat premium quality on wall/ ceiling surface including applying 2mm thick wall care putty over disturbed surface during preparation of any reason, sand papering thus make surface smooth and for above G+5 Buildings complete all as specified and directed. Note : Stage for Preparation of surfaces shall be got approved from GE before applying the finishes. Material shall be procured from manufacturer and work shall be got executed through authorised applicator Note:- Contracter has to render a FDR @ 10% for the respective item for the period of 5 years

M & L Preparation of old decorated external wall surface by mechanised sander of berger paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible applying 2mm thick wall care putty, again sand papering thus making surface smooth and applying two coat of cement base paint over a coat of primer on walls complete all as specified and directed.

M & L Preparation of old decorated external wall surface by mechanised sander of berger paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible applying 2mm thick wall care putty, again sand papering thus making surface smooth and applying One coat of cement base paint over a coat of primer wherever applicable on walls complete all as specified and directed.

M&L for Preparation of old painted surfaces of wood based surfaces of any description over 10 cms width or girth by applying sand paper etc.for proper preparation and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified and directed.

M&L for Preparation of old painted surfaces of steel of any description over 10 cms width or girth by applying sand paper etc.for proper preparation and applying one or more coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks all as specified and directed. Note : Payment shall be made for one coat only. Complete all as specified and directed.

Taking down cement plaster from brick , concrete,ceiling or stone walls incl racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed by Enginer in Charge.

M&L for 10mm thick rendering in cement mortar 1:3 on concrete surface of ceiling finished even and smooth surface without using extra cement including water proofing compound (liquid) as per manufacturer instructions complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on concrete or brick surfaces of walls or chajjas or pillars finished even and smooth without using extra cement including water proofing compound (liquid) as per manufacturer instructions, scaffolding and necessary formwork if required complete all as specified.

M & L for preparation of newly plastered external wall/ceiling surfaces of walls and applying two coat of cement base paint over one coat of primer including applying 2mm thick wall care putty over prepration of newly platered surface complete all as specified.

M&L for removal of plant growth by injection with chemical glyphosphate solution (4% concentration) @ 20ml or till refuse by cutting or injection in stem of plants or roots at 30mm. The area shall then be sprayed with solution 25ml glyphosphate (4% conc) diluted with 1 ltr of water. The Size of block shall be 02 Qtrs on each floor and vary in nos of floors. All roots of plants shall be removed completly and making good the disturbed surface and painted with acrylic paint or cement base paint complete all as specified and directed Note : Rates quoted for G+5 bldgs

M&L for Preparation of old decorated surfaces(Plastered or unplastered) of wall/ ceiling including cornices, pillasters etc by complete removal of existing treatment and applying two coats of white lime washing, complete all as specified.

M&L for preparation of old decorated surface (plastered or unplastered) of walls by complete removal of existing treatment by mechanical grinder and applying two coat of oil bound distemper with roller brush over a coat of 2 to 3 mm thick wall care putty on wall surface finished even and smooth over one coat of alkali resistant primer on plastered surfaces of walls complete all as specified .

Note :- Total amount of Sch of credit is Rs. 81597.00 as per Sch of credit. Net contract sum shall be total quoted amount of bidder (-) amount of Sch of credit.

S D Constructions

M/S Sunil Steel Works

JIWAN DASS THAREJA AND SONS

SK Engineers

M/S ANIL KUMAR

GIAN ENGINEERS

Shivam Firetech Engineers