E.I. work

Amount

Electrical Installation work

Dismantling the existing dilapidated DBs, switch board, inspection boxes, point wiring, sub-main cables, fittings & fixture as required very carefully & carrying the same for stacking at designated place as per direction of EIC.

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light points with 2 no. 2 way Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mm x 100mm x 62.5mm inspection box making earthing attachment, painting the MS box and mending good the damages to original finish- Av. Run 9 Mtrs.

Supply & Fixing of Single LED tube light fittings. (Make :- Philips -TMC 502 2xT-LED 22W or equiv. model of Wipro/Jaquar/Lighting Technology). incl S&F 1x 18/20 watts 4 ft LED tube lamp (Make:- Philips, Cat - Essential LEDTube 1200mm 20W865 T8 IND I) complete with all accessories and necy. connection by 2 x1.5mm² PVC insulated Cu. Wire & painting

Supply & Fixing of Philips/Wipro/Jaquar/Lighting Technology) Slimline LED Tube Light Batten (10W, 2ft, ) complete with all accessories and necy. connection by 2 x1.5mm² PVC insulated Cu. Wire & painting

Supply and fixing of 2'x2' False ceiling fittings (Make : Philips, Model : RC380B LED25S-6500 G6 L60W60 PSU OD S1 HSN Code:9405 or equiv. model of Wipro/Jaquar/Lighting Technology) with all necessary connection as per direction of EIC.

Supply & Fxing of 240 V, 12 watt recess mounted round slim panel LED downlight to be fixed on false ceiling (upper & lower portion of Balcony) incl. cutting of false ceiling very carefully with necy. interconnection by 3x1.5 mm² PVC insulated S/C Cu. Wire. [Make -Philips DN296B LED12S-6500 PSE WH S2 or equiv. model of Wipro/Jaquar/Lighting Technology)

Supply and fixing of 240V, 9 '' , 1370 rpm AC exhaust fan(EPC Make) after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of given diameter.including Supply & Fixing louver shutter on wall with necy. boL-Ks & nuts (6 mm dia x 62 mm long) for 23 cm Exhaust fan (9")

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S &F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 2 nos. 20A plug socket with separate 2 nos. 20A Combo Piano key type switch, indicator & 20A switch type SP MCB (approved make) on sheet metal switch board embedded in wall incl. S & F 200 mm x 150 mm x 65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm/25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

(i) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC (Comp Pt. & Aqua Guard)

(ii) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC (AC).

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

(i) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

(ii) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

S & F 250V 25A Timer controller for AC machine in SS double door (IP 42/43) 2+10-way DB enclosure (Make:- L-K/Schnider/ABB Elegance) with S&F following electrical accessories & front door locking arrangement with all connection by finishing the ends of 2x4 & 1x2.5 copper wire dowells solderless socket by crimping method as to GS earthing attachment on wall incl necessary connections as per direction of EIC :- (Single phase Twin timer)

i) 10kA, C-Curve, 240V, 25A DPMCB (L-K/Schnider/ABB Elegance) --- 1 No ii) 24 Hr programmable Digital Timer (L-K make cat no 67DDT0) ---- 1 No iii) 3 pole power contractor (L-K make cat no MNX 22/230V) with 1 NO +1 NC additional contact block ---- 2 sets iv) 2 Moduler AC motor stater (Make:- Legrand/Myrius) ---- 1 No. v) 2 Module plate with cover (Make :- Legrand/Myrius) -- 1 No vi) 20A Auto-Off-Bipass SPDT toggle switch (Approved/reputed make) ---- 2 Nos. vii) 10A SPST Moduler type switch (Make :- Legrand/Myrius) - 1 No. viii)Outgoing connector make ELMAX (Approved/reputed make) - 2 Nos

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Improvement of compound light

S & Installation outdoor type both sided door feeder piller box on bricks foundation with cement plastering and net cement finish on a height of 18” from Gr. Level. The piller box will be fabricated from 3 mm thick sheet steel for body portion and 5mm thick for top portion (roof) . The size of the piller box will be 1800(H) x 1300(W) x 1200(D) mm with inner enclosure [size 1700(H) x 1200(W) x 1150(D) mm] or as appropriate size and base channel (size:- 75mm x 40mm x 6mm ) & making interconnection by suitable size copper flat / wire. Double Locking arrangement will be made with lock and duplicate keys (7 lever godrej, navatal lock) with door handle. Two numbers lighting arrangement with control switch to be made inside the box as working light and 1 no. 250V., 5/15 combined plug socket & switch. Painting will be made by synthetic enamelled paint after 2 coats of red led primer. Bricks foundation will be cement, plastering and neat cement finish. The feeder piller box comprising the followings:-

(A) INCOMER:-

415V, 125A, TPN SFU unit with HRC fuses in open execution [Make :- Schneider /ABB/ Siemens/ Legrand/L-K] Complete Set ------ 2 Nos. with mechanical interlock with ABT facility [one source from DG & other source as standby form raw power Sub-station].

(B) BUSBAR CHAMBER:-

S&F 200 Amp capacity 99.9% - 99.5% electrolytic tinned copper 4 bar bus bar [size of flat 4 x 50 mm x 8 mm] mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification & all connection made with required size cu bars - 1set.

(C) OUTGOING:-

a) 415V, 63A,TPN SFU unit with HRC fuses in open execution [Make :- Schneider /ABB/ Siemens/ Legrand/L-K] Complete Set ------ 5 Nos.

(D) METERING:-

a) CTs for metering; CL:0.5, 100/5A, 5 VA, tape wound (Make- Kappa)- 6 nos

(b) LED Indication lamp - 6 nos. Including 240V 6A SP MCB 'C' curve - 6 nos.

(c) Panel mounted digital VoL-Kmeter in 96x96 mm² (AE/HPL) [0-500V] with VSS - 2 no.

(d) Panel mounted digital Ammeter in 96x96 mm² (AE/HPL) [0-150A] with ASS - 2 no.

(e) Danger Board - 01 no.

NECESSARY MINOR CIVIL & MECHANICAL WORKS :

Providing masonary cable trench after cutting all sorts of soil.The inside mearsurment of trench 600mm width x760 mm depth incl 250 mm thick brick work with 1st class brick cement mortorr (1:4) on both sides and bottom of the trench consisting with 100 mmthick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling 15mm thick (1:4) cement plaster to inside wall & 3mm thick neat cement furnish.

Supply, fabrication and placing/fixing MS checkered plate made of 6mm thick incl 30mm x 30mm x 6mm MS angle iron structure welded by fixing insert plates at 4 sides in cable trench top with 2 nos 3/8" TMT handle rod incl gas cutting, grinding & drilling with one coat of red laid primer and one coats of synthetic enamel paint as per direction of EIC.

Minor civil works for cutting floor/ brick wall for passing electrical cables/ cable tray/ protection pipes/ earthing strip etc including mending good the damages as per direction of the EIC.

Supplying & fixing medium gauge 40 MM dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required as to GS.

CABLING WORK :

Supplying & Delivery of one number 1.1 KV Grade XLPE insulated and PVC sheathed aluminium conductor cable ( Armoured) conforming to IS: 7098 / 1988 with its latest amendment of following size. [Make : Nicco /Gloster /Havells/ Polycab brand as approved by EIC] :

a) 4 Core 150 Sq. mm

b) 4 Core 25 Sq. mm

c) 3 Core 10 Sq. mm

Laying of 1.1 KV Grade XLPE insulated and PVC sheathed aluminium conductor cable ( Armoured ) of following size in the existing Masonary trench as required and as per GS.

a) 1 no. 4 Core 150 mm²

b) 1 no. 4 Core 25 mm²

c) 1 no. 3 Core 10 Sq. mm

Laying of 1.1 KV Grade XLPE insulated and PVC sheathed aluminium conductor cable ( Armoured ) of following size on existing cable tray as to GS.

a) 1 no. 4 Core 150 mm² to 240 mm²

b) 1 no. 4 Core 25 mm²

c) 1 no. 3 Core 10 Sq. mm

Laying of 1.1 KV Grade XLPE insulated and PVC sheathed aluminium conductor cable ( Armoured ) of following size through 450 mm long fabricated MS angle Support, making hole etc. as necy.incl S&F of clamp if required, mending good damages and painting.

a) 1 no. 4 Core 150 mm²

b) 1 no. 4 Core 25 mm²

c) 1 no. 3 Core 10 Sq. mm

S&F compression type gland complete with Brass Gland, Rubber Rings for dust & moistureproof entry of cables incl. finishing the ends by crimping method incl. S & Fixing Dowells solderless socket, tapes and terminating materials as follows;-

a) 4 Core 150 mm² Al cable

b) 1 no. 4 Core 25 mm²

c) 4 Core 10 mm² Al cable

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, boL-Ks & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support With 25x25x3mm angle iron support for following sizes: :

a) 300x50x1.25mm (18SWG)

b) 200x50x1.25mm (18SWG)

S&D of 240V, 45W, LED STREET light fittings (Philips BRP331 LED 54 CW R5N PC PSU S1 V1) or equiv. model of Wipro/Jaquar/Lighting Technology)

S&D of 240V, 110W, LED STREET light fittings (Philips BRP333 LED 110 CW R5C FG PSU S1 V1) or equiv. model of Wipro/Jaquar/Lighting Technology)

S&D of 240V, 144W, LED STREET light fittings (Philips BRP334 LED 110 CW R5C FG PSU S1 V1) or equiv. model of Wipro/Jaquar/Lighting Technology)

S&D of 240V, 180W, LED STREET light fittings (Philips BRP335 LED 180 CW R5C FG PSU S1 V1) or equiv. model of Wipro/Jaquar/Lighting Technology)

S&D of 240V, 250W, LED FLOOD light fittings (Philips BVP284 LED 300 CW FG SY5NB 250W PSU SPD) or equiv. model of Wipro/Jaquar/Lighting Technology)

S&D of 240V, 150W, LED FLOOD light fittings (Philips BVP283 LED 181 CW FG SY5WB 150W V1) or equiv. model of Wipro/Jaquar/Lighting Technology)

S&D of 240V, 100W, LED FLOOD light fittings (Philips BVP282 LED 120 CW FG SY5WB 100W V1) or equiv. model of Wipro/Jaquar/Lighting Technology)

S&D of 240V, 100W, Warm LED FLOOD light fittings (Philips BVP282 LED 120 WW FG SY5WB 100W V1) or equiv. model of Wipro/Jaquar/Lighting Technology)

S&D of 240V, 70W, LED FLOOD light fittings (Philips BVP281 LED 085 CW FG SY5WB 70W V1) or equiv. model of Wipro/Jaquar/Lighting Technology)

S&D of 240V, 18W, LED PL Lamp (Philips LED PL-L 18W, 6500K 2G11) or equiv. model of Wipro/Jaquar/Lighting Technology)

S&D of 240V, 9W, LED BC Lamp (Philips LED BC 9W, 6500K) or equiv. model of Wipro/Jaquar/Lighting Technology)

S&D of 240V, 30W, DOWN light fittings (Philips RS261B LED30S/865 PSU VWB WH) or equiv. model of Wipro/Jaquar/Lighting Technology)

Erection only of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth boL-K after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly as to G.S.

a) upto 9.0 Mtrs long pole

S&F 40 mm dia GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded copper wire and making connections as required for fixing outdoor street light type LED light fittings and mending good damages to wall incl. painting etc.

a) single arm bracket with header

b) tripple arm bracket with header

Providing CC (6:3:1) muffing 0.3 mtr dia upto the height of 0.3 mtr. above the ground level around the pole base complete with 3 mm thick neatly finished cement plaster all-round after dismantling the unserviceable muffing if necessary as to GS.

Distribution wiring for steel light on pole for outdoor fluorescent/SV/MV light fitting with 2x1/1.40 PVC insulated and sheathed wire (single core) in 15 mm dia GI Pipe (ISI-Medium), without control switch, incl. fitting and fixing the light fitting by providing 32 mm dia GI Pipe bracket of lengh 1.05 mts, on pole incl. S&F sutable MS flat clamps with boL-Ks, nuts etc. as required.

Painting of Steel Tubular Pole as per following length by two coats of synthetic enamel paint over one coat of red lead/ Zinc chromate primer of approved make incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint as to GS.

a) upto 9.0 Mtrs long pole

S&F of 250 x 200 x 100 mm SMC loop box (GSJB2520, Make - Sintex) with 4 way connector/ stud, 15A porcelain kitkat fuse on porcelain chair, rubber gasket, mechanical locking arrangement fixed on wall with earthing attachment.

Fixing outdoor type LED light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting.

S&F of Earth bus-bar of Galvanized MS flat 25 mm x 6 mm including nuts, boL-Ks & washers etc. as to GS.

Earthing with 50 mm dia TATA Medium GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI boL-Ks, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as to GS.

TERMS & CONDITIONS :- The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/ submission of bill. If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Defect Liabibility Period 1 (One) year

Make & model of each and every material to be approved by EIC

M/s Singh Electrical Works (BID ID -5587791)

ELEGANT POWER (BID ID -5597619)