T-95

Amount

Construction of plinth of 250/400 KVA T/F size 5’x5’x4’ above ground level and one. Ft. below the ground level of 9’’ after excavation of 4 earth brick ballast shall be provided and hammering will be done properly. After that a retaining wall of 9 width by first class brick in ratio 1:4 of cement and sand shall be made. The earth shall be filled up to one ft. below the top of the plinth. after this brick ballast shall be provided upto 6 from the earth level and proper hammering shall be done. One No. Jall of 12 mm. MS tore shall be fixed in the hollow of plinth and one. Ft. thick RCC in ration of cement, sand and stone ballast shall be laid on the top of the plinth. The 12 mm. thick plastering shall be done all around the plinth in 1:4 ratio of cement and sand. The contractor shall be responsible to complete the work as per direction of Supervision Engineer. It includes the cost of all material, labour, T & P, carrier etc. required for proper completion of work.

Making of wire mesh fencing around constructed 250/400 KVA T/F plinth 4mtr. x 3 mtr. with proper grouting Erection and construction of Toe-wall around the transformer plinth including digging of pits and making wall 9 inch wide & 30 cm. under the ground level and 30 cm. up to the ground level and making pocket Filling the concreting for grouting of wire mesh fencing and plastering around the wall in ratio 1:4 cement and sand providing of one no. main gate in the wire mesh fencing for shifting the transformer size of gate 8 ft. x 4ft. including fixing of dandala for locking system, (Size of angle iron 50x50x6mm. and size of wire mesh fencing 1.5x2 sq. inch wire gauge 10 SWG.) All material/labour will be arranged by the contractor.

Body and neutral earthing of 250/400 KVA Transformers by digging pits " dia up to 3 mtr deep including inserting lowering 80mm dia G.I. and insert 50mm G.I. pipe chemical filled pipe (pipe in pipe earthing) I.S.I Mark B-Grade connecting with G.I. flat 50x6 mm Power transformer to 80mm dia G.I. pipe and filling of chemical mixture around the G.I. pipe up to 3mtr including making of chamber.

Providing and Fixing of 11 KV Cable Indoor/Outdoor Jointing Kit of size 3x70/120 sq.mm Outdoor including removal of insulation, semi-conductor of the cable end and filling of cable box complete work as per direction of supervising engineer.

Providing and Fixing of 11 KV Cable Indoor/Outdoor Jointing Kit of size 3x185 sq.mm Outdoor including removal of insulation, semi-conductor of the cable end and filling of cable box complete work as per direction of supervising engineer.

Providing and Fixing of 11 KV Cable Indoor/Outdoor Jointing Kit of size 3x300 sq.mm Outdoor including removal of insulation, semi-conductor of the cable end and filling of cable box complete work as per direction of supervising engineer.

Laying of 11 KV 3x300 sqmm XLPE Cable by Making of trench with cement sand and bricks. work includes Making loops and connecting the 11 KV 3x300 sqmm XLPE Cable with double pole and complete commissing of the line as per RESPO Norms. (including Carriage with loading and unloading at both ends)

Shanti Enterprises (BID ID -5146485)

Shri Krishna Construction Company (BID ID -5146550)