REPAIR/ MAINTENANCE OF INTERNAL ELECTRIFICATION AND MISC WORKS IN OTM ACCN UNDER GE (WEST) JALANDHAR CANTT

Amount

Attending of complaints from 0800 hrs to 2200 hrs by deploying two electricians along with two helpers (one team should have atleast of cell phone for attending complain) for checking of existing electrical items including carried out minor repair such as changing of fuse, starter, rod, small pieces of wire etc. carrying out repairs such as tightening of lose electric connections, nuts, bolts, screws, switches, sockets, switch boards ceiling fans/exhaust fan etc. as required to make the item functional and to ensure continuous electric supply complete as specified and directed. Note: (a) Replacement of electric fitting shall measured and paid for separately under respective items. (b) Repairing upto 4 pints at a time in each qtr without any material will be considered as one complaint. (c) Rate quoted deemed to be inclusive of T&P etc. (d) The safety and insurance of persons/helper engaged in Execution shall be responsibility of contractor. (e) As the Nos of complaints shall be on required basis the financial effect to this is deemed to be included in the rate quoted.

Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc. complete and making good disturbed surfaces of walls ceiling etc. all as per existing including white washing, painting all as per existing complete all as specified and as directed.

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 1100 Volts grade with universal colour code (Phase & Neutral), drawn in and including PVC concealed conduit medium grade (ISI marked) with accessories like bends, tee junction boxes fixed on wall, ceiling etc. with sunk mild steel pressed terminal box 1.6mm thick sheet duly painted with two coats of black bituminous paint over a coat of red oxide primer and providing 3mm thick laminated bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one light / call bell / fan point controlled by one, one way switch complete all as specified and as directed.

All as per Ser item No. 3 above but for 5 amps socket on independent board complete all as specified and directed.

All as per Ser item No. 3 above but for 5 amps socket on same board complete all as specified and directed.

All as per ser item No. 3 above but with 2.5 sq mm cable for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

Supply and fixing switch piano flush type, 5 Amps, AC, single pole, one way, 230 Volts (ISI Marked) including taking down existing switch complete all as specified and as directed.

Supply and fixing switch piano flush type, 5 Amps, AC, single pole, two way, 230 Volts (ISI Marked) including taking down existing switch complete all as specified and as directed.

Supply & fixing bell push, flush type, 5 Amps including taking down existing bell push complete all as specified and directed.

Supply and fixing switch piano flush type, 15 Amps, AC, single pole, one way, 230 Volts (ISI Marked) including taking down existing switch complete all as specified and as directed.

Supply and fixing socket out let 5 Amp, 5 pin flush type including taking down existing socket complete all as specified.

Supply and fixing socket outlet multipurpose 3 in 1, 6 pin, 5 & 15 Amps, flush type including taking down existing socket complete all as specified

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm having 3 terminals, PVC polycarbonate and isolated body complete all as specified and as directed.

Supply & fixing lamp holder PVC, insulated body with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix ceiling fan regulator electronic rotary Step and switch type single phase A/C 230 volts all complete as specified and directed.

Supply and fix ceiling fan regulator electronic rotary Step and socket type single phase A/C 230 volts all complete as specified and directed.

Supply & fixing bell electric (ding dong) 230 volt, SP complete all as specified and directed.

Supply & fixing Buzzer, AC, 230 Volts, single pole complete all as specified and directed.

Supply & fixing MCB DP 240 volts 40 Amps to 63 amps in the existing DBs complete all as specified and directed.

Supply, fixing and connecting MCB SP 6 to 32 Amps, 240V, 10 KA including taking down existing MCB complete all as specified.

Supply, fixing and connecting MCB SPN 63 Amps, 240V, 10 KA including taking down existing MCB complete all as specified.

Supply & fixing Sheet metal enclosure for DBs when MCBs to be used, SPN 8 ways 240 V, with 200 Amps rated bus bar, double door, epoxy coated inside and outside fixed in repairs complete all as specified.

Supply & fixing MCCB 4 pole of capacity 100 Amps with breaking capacity 16 Kilo Amps including all electrical connections and fixing arrangement all as specified and directed by Engineer -in-Charge.

Supply & fixing MCCB 3 pole of capacity 63 Amps with breaking capacity 16 Kilo Amps including all electrical connections and fixing arrangement all as specified and directed by Engineer-in-Charge.

Supply & fixing sheet metal DB's TPN 4 way 240 Volts with 200 Amps rated bus bar, double door epoxy coated IP-43 paint inside and outside suitable for Isolator complete all as specified and directed.

Taking down existing tube light fitting for repair and refixing back to the same location complete all as specified and directed. (Spares parts shall be measured and paid separately under relevent items)

Supply and fixing in replacement of City 1 new decorative wall light fixture made up of polycarbonate, suitable for 15 W retrofit CFL (Spiral B-22 base) lamp type/ 1x15 W retrofit LED lamp (including CFL/ LED lamp) complete all as specified and directed. Make: Havells cat part no LHDL-02160099 or equivalent as mentioned in Appendix 'B' to particular specifications.

Supply and fixing in replacement of LED street light fitting 1X25Watts including lamp made of pressure die cast housed with toughened glass and high power LED with secondary optics, IP-66 protection, impact resistance of IK 07 & 10 KV external surge protection device including necessary brackets, nuts, bolts and washer as required for fixing and making electrical connections complete to by using PVC insulated and overall sheathed flexible copper conductor of size 0.75 sqmm 3 core complete all as specified and as directed. Make : Havells cat part No. ENDURAPEARLSL25WLED757SASYTOPC or equivalent as mentioned in Appendix 'B' to particular specifications.

Supply & fixing LED tube rod 22 W, double ended in built driver in existing tube light fittings including making necessary connections as required for LED tube complete all as specified and directed.

Supply & fixing electronic ballast choke 28 Watt 240 Volts, 50Hz sumo slim, Robust design, instant flicker free start,more than 25% energy saving type complete all as specified and directed.

Supply & fixing choke electronic ballast suitable for CFL fitting for 36 watt type complete all as specified and directed.

Supply & fixing 4 Pin, CFL 36 watt type complete all as specified and directed.

Supply & fixing 7 W LED bulb color temperature 6500K complete all as specified and directed.

Supply and fixing in replacement of surface mounted LED batten light fitting with LED tube rod 2 feet 1x10 watt having thermally conductive material heat sink lumen output 2100 lumen (min) 6500 K, power factor more than 0.95, IP-20 class-I protection with in build LED driver, surge protection up to 4 KV, operative on 140 volt to 270 volt AC supply complete all as specified and directed. Note :(i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturers.

Supply & fixing LED flood light fitting of 50 watt in epoxy powder coated pressure die-cast aluminium housing with, heat resistant toughened clear glass fixed with SS screws controlled with potted CVCC type, BIS marked electronic driver duly enclosed of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening of 5 KV minimum in circuit and 5 KV outside the driver but inside the fixture with IP-66, class-1 protection for LED and control gear compartments with high powder LED chips of rating 2.5 to 3 watt (maximum) with colour temperature 5700 K (Max) with secondary optics modular independent lenses provided with casing and caping to minimize glare and for better distribution of ligh suitable for voltage band 120 volts to 270 volts, power factor 0.95 (minimum) having efficacy 100 lumens/ watt all as specified and directed. Note : (i) All LED fittings shall be made in India only. (ii) All LED fittings shall have supporting LM-79 & LM-80 test certificate from Govt. approved NABL accredited lab showing the parameters duly signed by the local office bearer of manufacturer. (iii) All LED fittings shall have 2 years written warranty from local office bearer of manufacturer.

Supply & fixing LED Tube light Fitting 20 watt use and throw type complete all as specified and directed by Engr-in-Charge.

Supply & fixing lamp Rod suitable for T-5 fitting for 28 watt type complete all as specified and directed.

Supply & fixing Push type side holder suitable for 28 watt tube light fitting complete all as specified and directed.

Supply & fixing Push type side holder suitable for 36/40 watt tube light fitting complete all as specified and directed.

Supply and fixing in replacement of energy saving tube light LED luminaire including CRCA MS box batten fittings and 18 watt retro fit tube rod having terminally conductive material Lumen output 1000 lumens (min) 6200 K, power factor more than 0.90, IP-20 class-I protection, with built LED driver, surge protection up to 4 KV, operative on 140 volts to 270 volts AC supply, products must be made in India only, Complete prewired, connecting and testing complete all as specified and directed. Notes: (i) Contractor shall provide 2 years written warranty for the LED fixture complete including driver from the certified date of completion from the local office bearer of manufacturers. (ii) Contractor shall produce LM-79 & LM-80 Report of NABL accredited Laboratory duly signed by the office bearer of manufacturer.

Supply and fixing of LED bulb 5 Watt suitable for bulk head complete all as specified.

Supply and fixing new generation, post top, energy saving, environmental friendly, long life, 25 watt lantern including all fitting arrangements suitable for fitted with 76mm dia pipe and making electrical connections by using PVC insulated and overall sheathed flexible copper conductor of size 0.75Sqmm 3 core complete all as specified and as directed.

Material and labour for sub main wiring with two single core PVC insulated unsheathed, FRLS multi stranded copper conductor cable of size 6.0 Sqmm and one single core PVC insulated unsheathed, FRLS multi stranded copper conductor cable green colour of size 6.0 Sqmm as earth lead in and including 25mm dia PVC concealed conduit with fittings including taking down of old sub main wiring complete all as specified and as directed.

Material and labour for sub main wiring with two single core PVC insulated unsheathed, FRLS multi stranded copper conductor cable of size 4.0 Sqmm and one single core PVC insulated unsheathed, FRLS multi stranded copper conductor cable green colour of size 4.0 Sqmm as earth lead in and including 25mm dia PVC concealed conduit with fittings including taking down of old sub main wiring complete all as specified and as directed.

Supply and fixing in replacement LED 34Watts 2x2LED PLUTO NEO ceiling light fitting ultra modern designed, LED luminaire which provide soft light and glare free symmetrical illumination suitable for armstrong/grid ceiling including nuts, bolts and brackets etc and making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75Sqmm 3 core complete all as specified and as directed.

Material and labour for earthing complete with galvanised steel earth plate, electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25 metre below normal ground level) with top edge of the plate not less than 1.5metres below normal ground level, connected and including GI earth lead wire 4mm dia connected to earth plate by means of nuts, bolts, check nuts and washers of galvanised iron or steel, GI earth wire protected by 15mm dia GI pipe 'light grade' upto 2 metre above ground level and connected to machinery earth plate surrounded by packed alternate layers of charcoal and common salt 15cm thick all around top and bottom and watering pipe 20mm bore GI light grade all as shown in electrical plate No 3 of SSR Part-I of 2009, testing on completion including providing PCC chamber (1:3:6) using 20mm graded stone aggregate and 50mm thick cover with RCC 1:2:4 type B-1 and 8mm dia TMT bars 100mm C/C both way and frame including excavation earthwork and returning filling etc, complete all as specified and directed. Note :- Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit.

Supply and fix in repair Modular switch 6 Amps single pole one way as per existing type and size complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair Modular switch 6 Amps single pole two way as per existing type and size complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair Modular bell push 5 Amps as per existing type and size complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair Modular switch 16 Amps single pole one way as per existing type and size complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair Modular multi socket 3 pin and 2 pin 6 Amps round and flat as per existing type and size complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair Modular socket 6A /16 A Twin socket heavy duty as per existing type and size complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair Modular regulator electronic switch type 5 step suitable for 1200/1400mm sweep as per existing type and size complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair Modular regulator electronic socket type 5 step suitable for 1200/1400mm sweep as per existing type and size complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 12 Modular sheet complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 8 Modular sheet complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 6 Modular sheet complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 4 Modular sheet complete all as specified and directed by Engr-in-Charge.

GULSHAN SINGH GHAI AND SON

CHOUDHARY AND SONS