SPECIAL REPAIR AND REPLACEMENT OF ELECTRICAL WIRING AND FITTING IN DOMESTIC AREA UNDER GE (AF) LOHEGAON AT AIRFORCE STATION PUNE

Amount

Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light point complete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc including making good disturbed surfaces complete all as specified and directed.

Taking down the sub main wiring of any dia / sq mm on teak wood batten / PVC conduit GI earth wire complete all as specified and directed.

Taking down cearfully by unscrewing the unserviceable DB Boxes, MCB distribution boards SP & TPN with porcelain cutouts etc complete including making good disturbed surfaces complete all as specified and directed.

Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor FRLSH PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLSH PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings/fixture etc and surface type PVC box, cover plate complete all as specified and directed.

One light point or one fan point or bell point controlled by one switch SP one way 230 Volts.

One light point controlled by two two way switches

One 3 pin socket out let 5/6 Amps on same board.

One socket out let 5/6 Amps on Independent board.

Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor FRLSH PVC insulated single core 1100 volts grade & with one run of 2.5 Sqmm single core copper stranded FRLSH PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping, ISI Marked including surface type complete for housing one 15 A Switch / sockets complete all as specified and directed on independent board

S & F Sub Main Wiring with FRLSH PVC Insulated multistranded copper conductor wires of size 2x2.5 sq. mm + 1x2.5 sq. mm earth wire in casing caping complete all as specified and directed.

Supply and fix PT switch Piano type 1 way 6A complete all as specified and directed.

Supply and fix PT switch Piano type 1 way 16A complete all as specified and directed.

Supply and fix PT switch 2 way 16A, 1 module complete all as specified and directed.

Supply and fix Socket 6A/16A - 2/3 pin combined 2 module, flush type complete all as specified and directed.

Supply and fix Socket, 6A - 2/3 pin combined 2 module, flush type complete all as specified and directed.

Supply and fixing sheet metal enclouser single pole and neutral with 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete all as specified and directed.

Supply and fix Bell push 6A 1 module, flush type complete all as specified and directed.

M&L for bell electric Ding Dong type 230 volts single pole complete all as specified and directed.

Disconneting & taking down ceiling fan of 1200 mm sweep for carrying out servicing the same after painting of fan by applying 2 coats of enemel paint and hanging the same in position all as directed including writing MES No. Testing complete after servicing and fixing for smooth and noise free operation.

Supply and fixing in replacement fan regulator electronic, step type 2 module, 120 W suitable to control speed of fan and connecting electrically complete all as specified and directed.

M&L for ceiling rose 3 terminal size 65x20mm ISI marked complete all as specified and directed.

Supply and fixing in replacement sheet metal enclosure SPN DB's ( grouted in walls or surface mounted) double door type for MCB's 12 ways 240 volts rated with neutral bus bar link & blanking plate complete all as specified and directed.

Supply install, test and commissioning LT wall mounted indoor double door Panel board factory fabricated made out of 2 mm thick CRCA sheet & suitable size to accomodate all accessories/fittings, compartmentalized in construction to accommodate incoming and outgoing MCCB, MCB and TPN copper bus bars of rating not less 1.5 times the rated cap of incomer MCCB. The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/epoxy insulator. The incoming as well as outgoing MCCBs shall have copper extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders. A detachable predrilled gland plateof thickness not less than 2 mm thick should be used at the bottom for entry of armoured cable of adequate size with glands.The above panel shall be front openable lockable /openable by key, The Panel shall be manucatured from CPRI approved manufacturerof makes stipulated. The cost is inclusive of disconnecting existing cables, reconnecting the cables with lugs & glands, Excavation, taking loop out making good of distribued PCC all as directed.

Note :- (i) The cost quoted is deemed to be inclusive of taking down of energy meter from existing panel and fixing the same in new panel including necessery connection etc (ii) Provision should be made in panel to visible of energy meter reading fixed in panel door. (iii) Layout diagram of panel shall be got approved by GE. (a) Incoming MCCB FP 415 Volt 125 Amps 25 kA - 01 Nos (b) Outgoing MCB SPN 40 Amps, 230 Volts , 10 kA C curve - 06 Nos (c) Space for fixing of 5 Nos single phase energy meter as directed by Engr-In-Charge (iv) Cost of MCCB & MCB SPN is deemed to be included in quoted rate of Item No 19.00 and nothing shall be paid extra on this account.

M&L for MCB SP 6-32 Amps C curve and electric connections with copper thimbles complete all as specified and directed.

M&L for MCB SPN 40-63 Amps C curve and electric connections with copper thimbles complete all as specified and directed.

Supply and fix high quality indoor Surface and wall mounted industrial box type batten suitable for 20 Watt Aluminum T8 Tube rod 4 feet long , including LED retrofit Tube rod 20 Watt Aluminum T8 Tube rod 4 feet long 6000K colour temperature, having lumen output not less than 100 Lumen per watt & integrated electronic driver with industrial grade heavy duty driver having THD<10%. complete with all accessories internally pre-wired and including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal complete all as specified and directed.

S & F street light fittings 35 watt LED new generation energy saving and environmental friendly long life verstatile pressure dicast aluminium luminaire with mid power LEDs as light source including Lens on each LED for wide spread of light , IP 66 Protection and toughened glass cover alongwith electronic driver including suitable bracket & clamps and all accessories including taking down existing light fitting complete all as specified and directed.

Supply and fixing LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F lamp holder Angle type 230 V insulated body with back plate for batten fitting, fixing with proper round block incl taking down old complete all as specified and directed.

Supply and fixing LED light fitting decorative mirror type with high out put diffuser 1 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED Lamp 09 watt 230 volts B22 Holder type complete all as specififed and direccted.

S & F Sub Main Wiring with FRLSH PVC Insulated multistranded copper conductor wires of size 2x6.0 sq. mm + 1x6.0 sq. mm earth wire in casing caping/ PVC Conduit complete all as specified and directed.

Earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm as earthing lead buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised iron strip 25 X 4 mm as earthing lead by means of bolts, nuts, check nuts & washers etc made of GI and connected to earthing test point all as shown in electrical plate No. 5 of SSR Part I of 2009 & as specified or indicated and testing on completion including excavation/earth work in any type of strata PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab cover 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade, including galvanised iron strip 25X4 mm with GI protection pipe of 40 mm medium grade up to 7.5 meter length, etc complete all as specified and directed.

S & F GI earth continuity conductor or main earthing lead of size 25x4 mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for earthing etc. as required complete all as specified and directed.

Supply install, test and commissioning LT wall mounted indoor double door Panel board factory fabricated made out of 2 mm thick CRCA sheet & suitable size to accomodate all accessories/fittings, compartmentalized in construction to accommodate incoming and outgoing MCCB, MCB and TPN copper bus bars of rating not less 1.5 times the rated cap of incomer MCCB. The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/epoxy insulator. The incoming as well as outgoing MCCBs shall have copper extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders. A detachable predrilled gland plateof thickness not less than 2 mm thick should be used at the bottom for entry of armoured cable of adequate size with glands.The above panel shall be front openable lockable /openable by key, The Panel shall be manucatured from CPRI approved manufacturerof makes stipulated. The cost is inclusive of disconnecting existing cables, reconnecting the cables with lugs & glands, Excavation, taking loop out, making good of distribued PCC complete all as specified and directed.

Note :- (i) The cost quoted is deemed to be inclusive of taking down of energy meter from existing panel and fixing the same in new panel including necessery connection etc (ii) Provision should be made in panel to visible of energy meter reading fixed in panel door. (iii) Layout diagram of panel shall be got approved by GE. (a) Incoming MCCB FP 415 Volt 125 Amps 25 kA - 01 Nos (b) Outgoing MCB SPN 40 Amps, 230 Volts , 10 kA C curve - 07 Nos (c) Space for fixing of 6 Nos single phase energy meter as directed by Engr-In-Charge (iv) Cost of MCCB & MCB SPN is deemed to be included in the quoted rate of Item No. 31.00 and nothing shall be paid extra on this account.

sapana enterprises

Vijay Construction and Company

ASHUTOSH BUILDERS

Star Electrical

Mahindra Electric Stores

SHAILENDRA B TULSANI