Repair and renovation of office building of sports Council including laying of RCC slab on existing nallah left over portion and completion of Boxing Rink in Sports Stadium at Poonch.

Amount

Earth work in excavation by manual means over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed: All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) including all lead, lifts and carriage complete.

Providin.9 and laying in position specified grade of reinforced cement concrete excluding the cost of centering. shuttering, finishing and reinforcement-All work upto plinth level.1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) including all lead, lifts and carriage complete.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) Crushed including all lead, lifts and carriage complete.

Brick work with common burnt clay F.P.S.(non-modular) bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 fine sand) including all lead, lifts and carriage complete.

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means)

Centering & shuttering incl. strutting, propping etc and removal of form: Foundations: footings, bases of column etc. for mass concrete.

Edges of slab upto 20 Cms wide

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Walls of (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand) including all lead, lifts and carriage complete.

Providing and laying damp-proof course 5Crnm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size Crushed including all lead, lifts and carriage complete.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 litre/1 O sqm over and including base coat of water proofing cement paint applied@ 2.20kg/1 Osqm)

Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed Butt hinges bright finished of required size with with necessary screws excluding paneling which will be paid for separately all complete as per direction of engineer-in-charge. Second class deodar wood

Providing & fixing Decorative ply wood in doors with one side decorative veneer and commercial veneer on other face.

Providing & fixing G.I. chain link fencing of required width in mesh size 50X50mm including strengthening with 2mm dia wire or nuts, bolts & washers as required complete as per direction of Engineer –in-charge. Made of GI wire of dia 4mm

Painting with ready mixed synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on steel work.

Distempering with oil bound washable distemper two or more coats to give surface even & smooth of approved brand including priming coat with cement primer.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm including all lead, lifts and carriage complete.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS: 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colour shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg per sqm including pointing in white cement mixed with pigment of matching shade including all lead, lifts & carriage complete.

Providing and fixing ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufactures) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, ivory, Grey, fume Red, Brown lid on 20 mm thick bed of cement Mortar 1:4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc, including all lead, lifts & carriage complete.

Dismantling of old plaster racking out joint and meet the surface for plaster including disposal of serviceable material with in 15 metres lead.

Dismantling of old concrete manually/ mechanically means including disposal of material upto 50 metres lead in 1:3:6

Providing and fixing in position collapsible steel shutters with vertical channels 20x1 Ox2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T -iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer,

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc. 15 mm dia. nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc. 20 mm dia. nominal bore

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm diameter

Providing and fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised- Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 1 0 mm gap for thermal expansion. 110 mm dia bend

Providing and fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised- Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 1 0 mm gap for thermal expansion. 75 mm dia bend

Structural steel work in built up tubular round, square or rectangular, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete with hot finished welded type tubes.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Clearance of existing nallah bed soil mixed with kankar/morum/shingle/boulders lead upto 50 metres and lift upto 1.5 metres

Disposal of excavated earth/mulba for an average lead of 5 Kms.

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend.

Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing & fixing white vitrous china pedestal for wash basin complete

Providing & fixing PVC waste pipe for sink or wash basin including PVC waste filling complete Semi rigid pipe

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453 x 357 mm

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour : Waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45gms.

Providing and fixing C.P. brass angle valve for basin mixer and gyser point of approved make conforming to IS: 8931 with 15mm nominal bore

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide with effective height og 88 mm, weighing not less than 170 gms.

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.

Providing & fixing of Hand jet complete with lid of approved brand as per direction of Engineer-in charge.

Providing & fixing of seat jet complete with lid of approved brand as per direction of Engineer-in charge.

Providing & fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore

Providing & fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing & fixing C.P. brass close hole mixer piller tap of approved quality and make, weighing not less than 1.970 Kg. 15 mm nominal bore of standard back type (PTMT fittings)

Providing and fixing PTMT grating of approved quality and colour. 100 mm nominal dia

Providing and fixing unplastised P.V.C. connection pipe with PTMT nuts of approved quality, colour. 15 mm nominal bore with45 cm length

Note :- 1) Any Tropical error shall be consider as per sanction schedule of rates/ estimates.

SHIV RATTAN SINGH

Maqsood Ahamed

SHOKAT MEHMOOD

Sayed Imtiaz Ahmed

Mohd Bashir

SUNRIDE SOLAR PRIVATE LIMITED

Saahil Mir

M/S WASIM AKRAM KHAN

Javid Iqbal

GHULAM NABI MIR

Manohar Singh Sasan