Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.7 LAccepted-AOC FLAT NO 02 RUTUPARNA APARTMENT PLOT NO 36 S NO 324 2A NEAR G D SAWANT COLLEGE PATHARDI NASIK 422 010 | NASHIK | MAHARASHTRA | 422010 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹35.7 L+₹2.5 L (7.39%)Rejected-Finance 10 SANJAY HSG SOCIETY RACCA COLONY SHARANPUR ROAD NASHIK 422 002 | NASHIK | MAHARASHTRA | 422002 | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹38.4 L+₹5.1 L (15.4%)Rejected-Finance | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹38.7 L+₹5.4 L (16.4%)Rejected-Finance 1101 A WING SACHDEV COMPLEX JANGAL MANGAL RAOD BHANDUP W MUMBAI 400078 | MUMBAI SUBURBAN | MAHARASHTRA | 400078 | L4 | Rejected-Finance Not lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
25 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Nasik Road
Garrison Engineer Nasik Road AOP ComplexNear AOP Gate PO Gandhinagar Nasik 422006
As per Tender Documents
2023_MES_605828_1
GE/NRC/8993/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer Nasik Road
As per NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer Nasik Road
₹90,000
Yes
22 Aug 2023
27 Jun 2023
27 Jul 2023
27 Jun 2023
25 Jul 2023
11 Jul 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L for rendering 10mm thick in CM 1:4 as in backing coat on fair surfaces of brick wall.
M&L for glazed cermic tiles coloured size 300x350x6to7mm thick in vertical surface, set and jointed in neat cement slurry & pointed with coloured cement to match. As per manufacturing companies catalogue the size, shade, series of tile shall be approved by GE complete all as specified and directed.
M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes cement plaster 1:6 complete all as specified and directed.
M&L for Non skid ceramic tiles coloured 7 to 8mm thick (square/rectangular ) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. As per manufacturing companies catalogue the size, shade, series of tile shall be approved by GE complete all as specified and directed.
M&L for 8 mm to 10mm thick double charge vitrified ceramic tiles as in flooring, skirting or in any position and any shape. Area of each tiles not exc 0.36 sqm set & jointed in neat cement slurry and pointed in white or coloured cement to match. As per manufacturing companies catalogue the size, shade, series of tile shall be approved by GE complete all as specified and directed.
Taking down carefully (copper/aluminium) point wiring for ceiling fan/light fitting in ceiling and refixing the same in any position including replacing damaged material and lowering/rising the rod of ceiling fan if required complete and all as specified and directed by Engineer-in-Charge.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified.
Supply and fixing position suspended false ceiling system using T-grid suspended ceiling grid system . The size of grid shall be 600x600mm with GI frame work main runner 38x24x3600mm, cross tee 25x24x600mm/25x24x1200mm and wall angle 24x24x2540mm( thickness of the materail of 0.30mm). using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in the drop texture as per IS-2095, part-I 1996, fixed in the grid of T-grid suspended ceiling grid system duly susupended by 4mm dia GI bar hanged from the purlins of the roof with butter fly clips complete all as specified and directed by Engr-in-Charg.
Demolition of Brick work or stone/boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles.
M&L for works with fly ash bricks, straight or curved or plain exc 6m mean radius built in cement mortar 1:6.
M&L for rendering 12mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparing of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by the Engineer-in-charge
M&L for preparing of old plastered surfaces of ceilingss and applying two coats of white wash complete all as specified and directed by the Engineer-in-charge
M&L for preparing the newly plastered surface by rubbing, washing down with water and applying two coats of exterior emulsion paint(Asian) with one coat of coloured primer as directed by Engr-in-Charge incl necessary scaffolding and other safety arrangement to work at any height at site if required.
M&L for Two coat of distemper oil emulsion white or tinted on walls including preperation of surfaces by washing, rubbing down , stopping oand complete removal of old distempered surface etc.
Taking down chowkhats or frame with shutter (without taking off shutters from the frames) n.exc 1.50 sqm each removing from the site complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutters from the frames) exc 1.50 sqm but n. exc 4 sqm each removing from site complete all as specified and directed.
Taking down shutter of any description exc 1 sqm but n exc 2 sqm from chowkhat and removing to or from store as required complete all as specified.
Taking down shutter of any description exc 2 sqm from chowkhat and removing to or from store as required complete all as specified.
Dismantling of steel window/ventilators any description and any size complete all as specified and directed.
S&F powder coated aluminium (minimum 50 micron powder coated) door chowkats/frame made with aluminium section of size 100x44x2mm thick, and frames fixed in opening with hold fasts of size 25x3mm flat 150mm long 6 nos in each frame including cutting holes in brick work and embedded in PCC (1:2:4) bed block of size 150x150x150mm each and match the existing surfaces complete all as specified and directed.
S&F powder coated aluminium (minimum 50 micron powder coated) shutter, aluminium section of size vertical styles & top rail of shutters with section 84x44x2mm thick and middle & bottom rail of shutters with section 112x44x2mm thick including 5mm thick tinted glass pane at top and 12mm thick both side pre-laminated board at bottom pane inserted in position including all necessary fixing arrangement, joining cleats, glazing clips, rubber packing, aluminium anodized beading, screws , hinges, aluminium tower bolt 200mm long-02 Nos., mortice lock 100mm size 4 lever, 100mm dia disc handles etc complete all as specified and directed.
M&L for powder coated aluminium (minimum 50 micron powder coated) frame sliding window with triple shutter, triple channel including hold fast/screw drilled, aluminium cleats, making good the disturbed area with existing finishing so as to match with under mentioned specification:- (a) Frame of window 100x45x2mm (b) Shutter top and bottom 39.40x17.76x1.5mm (c) Shutter inter lock section 38.40x17.70x1.5mm (d) Top size guide 92x31.75x1.5mm (e) Bottom guide 92x31.75x1.5mm (f) 5mm thick tinted glass with aluminium glazing clips rubber beads in area n exc 1.5 m size. (g) Stainless steel stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm. (h) Handle section 39.40x17.70x1.5mm with glazing clips, rubber beading, roller, locking plate etc. complete all as specified and directed.
S&F mild steel flat iron for hold fasts, wall ties, hooks for hanging fans , plain angle, clamps for pipe and similar small articles conforming to Fe-290 Gde -E-165 complete all as specified and directed.
M&L for PCC 1:3:6 type C-1(using 20mm graded stone agg) as in bed blocks for grouting hold fasts, coping or similar work including necessary form work complete all as specified and directed.
S&F door stoper of brass 140mm body and tounge complete all as specified and directed.
S&F in repairs Door closer hydraulically regulated, aluminium (extruded section body), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as directed.
S&F in repair 25mm dia medium weight, stainless steel as in drapery rod complete all as specified and directed.
S&F stainless steel brackets colour and design as approved suitable for curtain rods of 25mm dia complete all as specified and direcdted.
S&F stainless steel knobs colour and design as approved suitable for curtain rods of 25mm dia complete all as specified and direcdted.
Taking down GI water tubing and connections for 15mm bore all as directed.
Refixing of old steel tubing and connections 15mm bore in new or old position (walls, ceiling,floors etc).
S&F tubing, medium grade, galvanised, 15mm bore with all fittings; fixed to walls and ceilings or laid in floors complete all as specified.
Taking down GI water tubing and connections for 20mm bore all as directed.
Refixing of old steel tubing and connections 20mm bore in new or old position (walls, ceiling,floors etc).
S&F tubing, medium grade, galvanised, 20mm bore with all fittings; fixed to walls and ceilings or laid in floors complete all as specified.
S&F in repairs angle cock, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipes as for unions and fixed in repairs all as specified and directed of size 15mm bore.
S&F in repairs 15mm bib taps cast copper alloy, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm dia.
S&F in repairs bib tap 15mm bore chromium plated fancy type long body with crutch or butterfly handle fixed to iron pipes complete all as secified and directed.
S&F in repairs chromium plated cast copper alloy pillar tap with capston heads fancy type fixed to iron pipes 15mm dia.
S&F Brass CP wall mixer for mixing hot &cold water scrwed down for iron pipe and 15mm bore fixed in repair.
S&F in repairs flush pipe of polyethylene of low or high density of PVC 32mm dia suitable for low level flushing cistern complete all as specified and directed by Engr-in-Charge.
S&F in repirs coloured PVC valve less, syphonic action flushing cistern, low level, 10 ltr capacity with inlet, ball valve, float, chain and pull and brackets complete all as specified and directed.
S&F in repairs vitreous china squatting patern "Orisa pattern" size 580mmx440mm with trap white with intergral footrest complete.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.
S&F in repirs vitreous china wash basin Flat Bar 550x400mm excluding taps, chain and plug and proceilein stopper but incl brackets cutting for and pinning in ends of brackets or errecting stand, CP waste coupling of suitable size with long shank and bracket grouted in CM 1:2 in wall completed all as specified and directed.
S&F ready made PVC conection 15mm bore 450mm long with end brass nuts, screws and PVC washer complete all as specified and directed.
S&F in repair waste fittings 40mm brass chromium plated for glazes ware sinks, basins etc with long screwes shanks and fly nuts flange end bedded in red lead cement and other end fixed in sink complete all as specified and directed by Engr-in-Charge.
M&L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement dia of outlet 75mm.
S&F in repairs brass chromium plated tublar towel rail 'D' shape 20mm dia 600mm long.
S&F in repairs chromium plated grating of size up to 100mm.
Supply and fixing in repairs 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including GI tank nipple etc. complete and all as specified and as directed by Engineer-in-Charge. including dismantling existing water tank and removing from site of any capacity.
Demolition of cement concrete in ground floor and pavings n.exc 15cm thickness (below or above ground level).
M&L for 75mm thick PCC 1:4:8 Type D-2(using 40mm graded aggregate) as in sub base over rammed earth complete all as specified and as directed.
M&L for screed bed or bedding layer 20mm thick in cm 1:6 for laying floor finishes complete all as specified and directed by Engr-in-Charge.
M&L for rough shahabad stone 25mm to 30mm thick in flooring /plinth set and jointed in neat cement slurry and pointed in cm 1:4 complete all as specified and directed.
M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper mbedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping complete all as specified and directed
M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper mbedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping complete all as specified and directed
M&L for Designer coloured, polished floor paver tiles of size 300 x 300mm x 25mm thick or equivalent size as in machine pressed set, jointed and pointed in neat cement slurry over and including screed be 20mm thick in CM 1.6 including demolition of existing surface complete all as directed by Engineer-in-Charge.
Formwork to soffits of suspendedslabs such as roof slabs, floor, slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) etc all as specified and directed.
M&L for providing reinforced cement concrete (Nominal Mix) for Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like etc using 20mm graded aggregates all as specified and directed.
M&L for TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc.
M&L for 100mm thick nominal mix concrete type A-1, M-20 (20mm graded aggregate) laying in floor with screed vibrator including finishing cement concrete surface even and smooth with brooming of top concrete surface complete all as specified and as directed.
Dismantling AC corrugated or semi corrugated sheets in wall cladding complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description and in any position complete all as directed by Engr-in-Charge.
Excavation in post holes (or similar holes) each in not exc 0.5 cum getting out and removing surplus soil to a distance in exc 50 mm and making good surface in soft/loose soil complete all as specified and as directed.
S&F roof trusses (framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe-410-W (Gde E-250) Quality -A all as specified and directed.
S&F steel work as in tabular trusses/supproting pipes etc complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St-240
M&L for Two coat of synthetic enamel paint over red oxide on new painted steel or iron surfaces of any description over 10cm width or girth including preparation of surface.
S&F in repairs Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws (at any height / any location ) complete all as specified and directed.
Demolition of concrete (unreinforced) of any description and in any position not otherwise secifically provided for.
M&L for Providing cement concrete type B0 1:2:4(12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges.
Taking down carefully existing bitumenous membrane/tarfelt treatment any description and cleaning and making good damaged surface of roof ,parapet,facia etc in cement mortar 1:4 where ever require and removing rubbish out of defence land.
M&L for rendering 15mm thick in CM 1:3 with intergral waterproofing compound @ 200 ml per bag of cement used on roof surfaces,parapets,facias etc . Note: Waterproofing compound shall be measured and paid separately.
Supplying only integral water proofing compound ISI marked complete all as specified and as directed.
M&L for Waterproofing on roof including flashing and junctions of parapet,kerb, wall etc.as under :- (a) Cleaning of plasetered roof,parapet,facia surface and applying one coat Oil based cold bituminous primer @ 0.70 kg per sqm. (b) Laying a layer of APP based polymeric membrane,3 mm thick(minimum),weighing not less than 3.60 kg/Sqm prefabricated fire layer waterproofing membrane reinforced with polyester non woven fabric(weighing not less than 160 gms/sqm) shall be applied over compatible primer at 0.40 litre/Sqm of density at 25 degree Centigrade 0.87-0.89 Kg /Litre and viscosity 70-160cps or cold sticker, application of APP modified membrance shall be by torch application. The overlaps shall be minimum 150mm on the transverse direction and 100 mm on the longitudinal direction. (c) Painting the exposed APP membrane surface with bitumastic aluminium paint @ 0.15Kg/Sqm. (d) APP membrance,Primer and bitumastic aluminium paint shall be of same brand as per approved by GE.
Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store and making good to disturb surfaces of wall/floors etc as specified & directed.
M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLSH type drawn through and including stove enamelled steel conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLSH type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for (a) One light point/ fan point controlled by one, one way swtich. Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.
All as per ser item No. 81.00 herein before but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.
All as per ser item No. 81.00 herein before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLSH type for one 15 Amp 6 pin socket outlet point including PVC cable 4 Sqmm FRLSH type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes.
All as per ser item No. 81.00 herein before but on independent board.
All as per ser item No. 81.00 herein before but one light point controlled by 2 way switches.
All as per ser item No. 81.00 herein before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.
M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC casing and caping (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point and one fan point controlled by one, one way swtich. Note:- Unit rate include for cutting chases for sinking for boxes and making good to wall ,floors etc.
All as per ser item No. 87.00 herein before but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.
All as per ser item No. 87.00 herein before but on independent board.
All as per ser item No. 87.00 herein before but one light point controlled by 2 way switches.
All as per ser item No. 87.00 herein before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.
All as per ser item No. 87.00 herein before but with 2.5 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including Fibre insulation boards, treated on one face only of adequate size for mounting purposes.
Supply and fixing in replacement of switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed.
Supply and fixing in replacement of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.
Supply and fixing in replacement of switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.
Supply and fixing in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 3 pin) 5/15 Amps, 230V, AC.
Supply and fix in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with LED invertor bulb 9 watt complete all as specified and directed
Supply and fix in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish.
Supply and fixing in replacement of bell push, flush type, 5 Amp single pole, 230 volts white finish all as specified & directed.
Supply and fixing in replacement of switch piano flush button 5 Amp single pole 2 way 230 volts white finish all as specified & directed.
M&L for in replacement and connecting up fan regulator electronic on existing phenolic laminated sheet dimmer type 230 volts, 450 watts suitable for ceiling fan 1200/1400mm sweep.
Supply and fix in replacement Energy efficient LED tube & batten Luminaire, 20 Watt, 4 feet long complete with prewired using 1.5 Sqmm FRLS PVC insulated (Unsheathed) 3 core copper conductor cable, 1100V grade complete all as specified and directed.
Supply and fixing in replacement of LED 150 Watt highbay optica heavy duty luminaires with engineering grade diffuser for added protection, secondary optics, suitable for industrial lighting applications, with IP 65 incl connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.
Supply and fixing in replacement of LED 10 Watt inverter LED batten with rod complete with lithium ion battery with charging time 8-10 hours and backup time upto 4 hours mounted on square box of suitable size connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.
Fixing only in replacement of LED tube light fittings 18/20 watt complete with connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to tube light fittings complete all as specified and directed by Engineer-in-Charge. Note:- LED tube light 18 /20watt will be issued to contractor free for fixing only.
Supply and fixing in replacement of buzzer, AC, 230 volts, single phase complete all as specified and directed.
Supply and fixing in replacement of bell, AC, 230 volts, single phase complete all as specified and directed.
Supply and fixing in replacement of bell multi music type AC, 230 volts, single phase complete all as specified and directed.
Supply and fixing in replacement of sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified.
Supply and fixing in replacement of sheet metal enclosures with plug socket triple pole and earth with three pin and earth plug with socket 415 volts complete with one triple pole MCB of 63 Amps (TP) complete all as specified.
Supply and fixing in replacement of submain wiring with three single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 6 Sqmm drawn through in and including steel conduit including 6 Sqmm 1100Volts grade, FRLSH type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.
Supply and fixing in replacement of submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including PVC heavy duty surface casing caping including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed.
Supply and fixing in replacement of submain wiring with three single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 4 Sqmm drawn through in and including steel conduit including 4 Sqmm 1100Volts grade, FRLSH type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note for Srl item No. 111.00 to 114.00 herein before :- (i) Three runs of cables and one run of continuous earting cable drawn in steel conduit will be measured as one length of sub main. (ii) Steel conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc.
Supply and fixing in replacement of submain wirng with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 2.5 Sqmm drawn through in and including PVC heavy duty surface casing caping including 2.5 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note for Srl item No 111.00 & 114.00 herein before :- (i) Two runs of cables and one run of continuous earting cable drawn in casing and caping will be measured as one length of sub main. (ii) PVC casing caping and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for sinking for boxes and making good to wall, floors etc.
Supply only in replacement of LED outdoor drivers, suitable for 150 watt street light fitting all as specified and directed by Enginner-in-Charge.
Supply and fixing in replacement sheet metal enclosure (factory made), TPN Vertical Distribution Boards (MCCB Incomer) IP43 protection Double Door : Plain 4 way with 200 Amps rated busbar all as specified and directed.
Supply and fixing in replacement sheet metal enclosure (factory made), TPN Vertical Distribution Boards (MCCB Incomer) IP43 protection Double Door : Plain 8 way with 200 Amps rated busbar all as specified and directed.
Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 415 volts, 200 Amp rated bus bar with front openable cover suitable for TP & N 4 ways all as specified & directed.
Supply and fix in replacement distribution board sheet metal enlosure factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 2 ways all as specified & directed.
Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 4 ways all as specified & directed.
Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed.
Supply and fix in replacement distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 12 ways all as specified & directed.
Supply and fixing in replacement 4 Pole MCCB 125 Amp, 50 Hz, 415 V, with adjustable thermal & adjustable magnetic setting, breaking capacity 25 KA.
Supply and fix in replacement MCCB 63 Amp TP, 415 volts 16KA.
Supply and fix in replacement MCB FP 63 Amp, 415 Volts, 50 Hz with 10 KA .
Supply and fix in replacement MCB TP 40 Amp, 415 Volts, 50 Hz with 10 KA.
Supply and Fixing in replacement of MCB DP/SPN 6-32 Amps, 230 Volts, 50 Hz with 10 KA.
Supply and Fixing in replacement of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA .
M&L for replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.
Supply and fixing in replacement of 30 Watt LED street light fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08. , including coneecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge.
Supply and fixinf in replacement of LED luminaire 600mm x 600mm, 36 watt, 220 volts AC recessed/ surface type fittings, epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.
NOTE: - AMOUNT OF SCHEDULE OF CREDIT RS. 57,475.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.
M/S SAMEER SUBHASH PATANI
SHILPVED
sapana enterprises
Bidder Name
sapana enterprises
M/S SAMEER SUBHASH PATANI
SHILPVED
Abhiraj Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .