Landscape for Climate park at Kilambakkam

Amount

Site clearing

Clearing the Scrub jungle in working site, rates including labour charges and required tools & plants and as directed by the departmental officers

Civil Works

Earthwork excavation for foundation trenches in all types of soils and subsoils except on hard rock requiring blasting inclusive of shoring, strutting and bailing out water whenever necessary and depositing the soil as directed upto the lead of 10 m including dressing the sides and ramming of bottoms including back filling the same.

Construction of Wet Mix Macadam 150mm compacted thickness in two layers by providing , laying , Paving , and compacting of aggregate gradation satisfying to Table 400-13 of MORTH and satisfying the physical parameters as per MORTH Table 400-12, mixing in a Wet Mix Plant of 200 tonne capacity at OMC , carriage of mixed material to work site and laid in sensor pavers to the required line and grade as per the drawing and compacted with vibratory roller of 8-10 tonne to achieve the desired density of 98% of Maximum dry density.

Providing and laying plain cement concrete 1 : 4 : 8 (1 cement : 4 sand : 8 graded stone aggregate 40mm nominal size) in foundation and basement including dewatering wherever necessary and laid in layers not more than 15 cm thick and consolidation etc

CONCRETE WORKS

Reinforced Cement Concrete 1:1.5:3 (1 Cement : 1.5 Sand : 3 aggregate)using graded stone aggregate 20mm nominal size in Foundation and basement including watering, curing, vibration, finishing but excluding the cost of reinforcement and formwork.

Supplying, fabricating and placing in position of plain bars for dowel rods or RTS rods for all RCC works, including the cost of steel, bending, binding, cost of binding wire etc., complete and as directed by the Engineer in charge.

Providing form work for centering shuttering etc. for all RCC works including strutting for height upto 3.29m using mild steel sheets of 10 gauge, size 90cm x 60cm stiffened with welded mild steel angles of size 25mm x 15mm x 3mm laid over silver oak providing strutting to centering of reinforced cement concrete columns, slabs or plane surfaces supported by casurina props of size 10 to 13cm diametre spaced at 75cm centre to centre, for every additional than 30cm over initial 3m height. (initial 3m will be measured from the finished PCC level)

All Footing & column

Other area

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 200 mm and 200 mm thick of solid cement concrete with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machines with the latest moulding techniques etc,. only shall be used. Rate to include all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge. All Area - Basement below the ground

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 200 mm and 200 mm thick of solid cement concrete with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machines with the latest moulding techniques etc,. only shall be used. Rate to include all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge. for Superstructure ground floor

Plastering the wall surface in cement mortar 1:4 (one cement:four sand) 12mm thick in all floor levels including curing complying with standard specification and as directed by the departmental officers. For Superstructure ground floor - plastering

Special ceiling plastering and finishing all RCC exposed surface such as RCC slabs, sunshades, canopies, staircase, steps, landing slabs etc., with CM 1:3 10mm thick including hacking the surface and providing necessary CM nosing, beading as per wherever necessary using the same mix etc., completer complying with standard specification and as directed by department officer.

TERRACE WATERPROOFING: Supply and laying water proofing treatment for terrace covering the following order and consisting of following operations. i) Making ' V ' grooves at the construction joints of size 20 x 20 mm and filling the "V" Groove with CICO No. 3 Quick Setting Waterproofing Compound admixed with cement. The roof slab / gutter slab shall be thoroughly cleaned to remove debris and dust, and applying 2 coats not less than 2 mm of polymer based Elastomeric Coating like TAPECRETE - RTU compound and cured for 7 days and followed by a layer of 20 mm thick cement mortar 1:3 admixed with CICO NO:1 (or) other approved equivalent make shall be spread over the prepared surface On the spread mortar provide and lay well burnt brick bats (COBA) to an average minimum thickness of 55 mm (i.e.. minimum 40 mm thickness at lower end and 70 mm thickness at higher end). An additional layer of brick bat (COBA) shall be laid over the existing brick bat COBA surface if required to get the required gradient for adequate drainage giving a slope of approximately 1 in 120, which will be measured separately under relevant items The gap between brick bat shall be filled with cement mortar 1:4 admixed with waterproofing compound like CICO NO:1 or approved equivalent afterwards curing shall be carried out for two days a final layer of cement mortar of 1:3 admixed with water proofing compound like CICO NO:1 or approved equivalent make shall be laid to a thickness of 20 mm and draw a false line of 300 mm x 300 mm.The parapet side wall / gutter wall shall be thoroughly cleaned to remove all dust particles and a layer of 15 mm thick C.M 1:3 shall be laid to a height of about 300 mm above the top of the terrace/Gutter slab on the Parapet / Gutter side wall admixed with water proofing compound like the CICO NO:1 or approved equivalent make. Providing, supplying, mixing, applying two coats of ready to use two component Acrylic polymer modified cement based, flexible, waterproofing slurry like or approved equivalent to a thickness of 2 mm over the plastered surface of operation as per manufacturer's specification and as directed.(Plan area of Terrace only will be measured for payment )

Supplying and painting of 2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete. Rate including all brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportation charges, loading, unloading, curing, sanding, touch up putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. All external paint

Supply and painting of two coats of Acrylic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer. Rate including all brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportation charges, loading, unloading, curing, sanding, touch up putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.(Internal surface) All internal paint

Dadoing the wall with vitrified tiles of approved quality, colour and design joint free of size 450x300x8mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement three sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers.

Flooring with Joint free double charged vitrified tiles of approved quality, colour and design joint free of size 600 x 600 x 8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers

Flooring with Joint free ceramic tiles of approved quality, colour and design joint free of size 305 x 305 x 8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. TOILET BUILDING-GST ENTRANCE & COMMUNITY - 2Nos oilet Block flooring

Providing and fixing EPDM flooring 38mm thk. as per drawing and technical specifications including cost of all materials, labour, HOM, form works, scaffolding & centering complete as per specifications. Kids play

Supply and laying with best quality the following materials of Machine Polished granite slab for wash basin counter top of 18 mm thick (Jet Black) including cutting for wash basin and edge polishing to be set in CM 1:4 (1 of cement : 4 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportation charges, loading, unloading, preparation of surface, necessary hacking on RCC surface, cutting to required shape, edging, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. TOILET BUILDING-GST ENTRANCE & COMMUNITY - 2Nos Wash basin top

Supply and Laying flooring with best quality approved colour Leather Finish Granite slab for Countertop & Coping not less than 18 mm thick in a single piece (Sira grey) for each step for the entire width of the stair, machine cut and machine high pre-polished, set in C.M 1:4 (1 of cement : 4 of manufactured sand) 20 mm thick topped with white cement slurry (for surface contact of the bottom of the granite slab) as per approved pattern, including finishing the joints with matching shade, cement slurry, cutting, edge chamfering and polishing rough, medium, nice tin-oxide polish. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportation charges, loading, unloading, preparation of surface, necessary hacking on RCC surface, cutting to required shape, edging, edge moulding anti skid & grooves as per drawing, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge planter wall coping

Providing UPVC (Unplasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from unplasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be a three chamber system which provides high insulation properties with an outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. All doors

Supplying and fixing UPVC (Unplasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most raging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work. All windows

Fabrication supplying and erecting M.S. tubular structure (top of building) of all spans as per approved drawing & design with prefabricated steel applications using quality material and are durable, reliable and corrosion and abrasion resistant. Welding shall confirm to latest structural welding code. Quality shall be on various parameters like shape, size, design gauge and polish. The entire trusses is anchored in RCC column by using 4 nos of M.S. anchor bolts at each support with 10mm thick base plate and shoe plate. The work includes cutting, straightening, placing in position of M.S. pipes and welding wherever necessary and applying one coat of primer coat to all the members including cost of all materials, labour charges, and hire charges of machineries for cutting, welding, grinding and erection equipments, with all lead and lift, transportation, letc., complete as per specification (MS structures with corrugated aluminium sheet with HPL board warping) All truss work

Supply and painting of two coats of Synthetic enamel paint of approved shade and colour over one coat of metal primer for new iron works Rate including all brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportation charges, loading, unloading, curing, sanding, touch up putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge. All truss work enamel paint

Fabrication supplying and erecting M.S. tubular/MS plate/MS flat of all spans as per approved drawing & design with prefabricated steel applications using quality material and are durable, reliable and corrosion and abrasion resistant. Welding shall confirm to latest structural welding code. Quality shall be on various parameters like shape, size, design gauge and polish. The entire trusses is anchored in RCC column by using 4 nos of M.S. anchor bolts at each support with 10mm thick base plate and shoe plate. The work includes cutting, straightening, placing in position of M.S. pipes and welding wherever necessary and applying one coat of red oxide primer coat to all the members including cost of all materials, labour charges, and hire charges of machineries for cutting, welding, grinding and erection equipments, with all lead and lift, transportation, letc., complete as per specification (Signages) Total signages

Providing and fixing of MS box section/flat/chain link mesh as per drawing details and vendor details and follow site engineer instruction. The work includes cutting, straightening, placing in position of M.S. pipes and welding wherever necessary and applying one coat of red oxide primer coat to all the members including cost of all materials, labour charges, and hire charges of machineries for cutting, welding, grinding and erection equipments, with all lead and lift, transportation, letc., complete as per specification (Chain Link Fencing)

Supplying and laying of Cement Concrete Paver blocks of 60mm thick over the sand filling and compacted with power rammer. The rate includes cost of paver block but excluding the cost of sand, labour charges for laying, hire charges for power rammed etc. complete and as directed by the Departmental Officers. central area & paving area

Supplying and laying of Cement Concrete grass Paver of 120mm thick over the 50mm thk. M.sand filling and compacted with power rammer. The rate includes cost of pavers the cost including of m.sand, labour charges for laying, hire charges for power rammed etc. complete and as directed by the Departmental Officers. (make; Basant betons-Art line pattern) All grass pavers area

Filling with filling sand(M Sand) in foundation and basement in layers not exceeding 15 cm in depth and each layer to be well watered, rammed and consolidated as directed by the Engineer-in-charge (Rate inclusive of cost of sand ). All sand filling

Supplying and laying of PCC 1:4:8 laid on WMM surface with broom finish with intermediate required grooves as per vendor details. The rate includes crushed stone, m.sand, cement, machine mix, labour charges for laying, curing, etc. complete and as directed by the Departmental Officers. GST Parking Footpath

Providing and laying 18-22mm thk Stone Dark & Light grey colour Grit finish in CM 1:6 as per approved colour and pattern including necessary scaffolding and curing etc., complete as per specifications all grit paving

Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on grit paving surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from streaks and holes complete as per specifications Pathway zone colour band - 300mm wid

Rammed earth filling layer by layer as per required lvl withdrawal compaction as per drawing details with site instruction with standard specification and as directed by the client/engineer-in-charge All rammed earth area

Providing and fixing of WPC planks 150mm wide 19mm thk. including cost of materials, labour, curing complete as per specification All WPC qty

Electrical Works

Note: 01. Unloading, receiving at SITE, loading, storing and leading shall be contractors account only. 02. Refer Schematic diagram and all panels should be as per the Schematic diagram only

LT PANELS For all panels, approval shall be taken for each panel in the form of GA Drawings before fabrication.

LT PANELS CHECKLIST (i) Vendor should get GA drawing approval before fabrication (ii) A Technical specification and make of materials should be get approved before the procurement of the materials (iii) For Bus bars - 0.8A/Sqmm for Al & Earthing should be twin earthing (iv) The withstanding capacity mentioned is Ics only (v) All MCCB should be with adjustable overload and fixed short circuit relays (vi) All MCCB upto 250A should be with thermal magnetic release (O/C & S/C) and 250A & above should be with microprocessor release (O/C & S/C) (vii) All outgoing MCBs should be fixed inside the panel with view glass (viii) All Incoming breakers should be 4P and outgoing breaker should be TPN (ix) The Panel board construction should be 3B construction (x) All Incoming breakers should be with shunt trip facility for remote operation (xi) All the metres should have RS 485 modbus output for BMS integration (xii) Multi function metre should be with following parameters ; Volts, Amps, F, PF, W/VA, Wh /Vah ()

MLSB with IP55 Protection Supply, installation, testing and commissioning of MV cubicle type suitable for 415V, 3-phase, 4 wire system, compatible to BMS totally enclosed floor mounted type, dust, damp and vermin proof main distribution board with made out of 14 SWG MS sheet complete with bus bars, MV danger notice plate, protection relays, digital multifunction metre with RS485, CTs interconnections with suitable capacity / solid aluminium strips, connection of incoming and outgoing cables with thimbles, electrostatically powder coated and having following incoming and outgoing switchgear complete with suitable size to accommodate the following accessories , specification and as required.

EB Incomer .. 1Nos. 160 amps 25kA 4 Pole MCCB Metering CT : 160/5A, Cl:1.0 ,15VA - 3 Nos for Metering Earth Fault Relay - 1 Set Breaker ON/OFF/TRIP & RYB indicating lights with control MCB’s 1 Set Multi Function Metre with RS 485 Port -1No

Outgoing (i)63A TPN 10kA MCB - 11Set (ii) 40A TPN 10kA MCB 2Set NOTE: 01.The withstanding capacity mentioned is Ics only 02. All MCCB should be with adjustable overload and fixed short circuit relays BUSBAR : ALUMINIUM RATING : 160 AMPS

MCB DBs Supplying, fixing, connecting & commissioning the following Compartmentalised MCB DISTRIBUTION BOARDS fixed flush with the wall. All MCB DBs shall be double door only. Note :- (i) B Curve MCB should be used for Lighting DB (ii) C Curve MCB should be used for Raw Power DB (iii) All Single Phase Distribution boards should be 7 Segment DB. (iv) All RCCB/RCBO should be with 30mA breaking capacity All DBs shall have an incoming adopter box (Powder coated) to receive wires in pipes / cables etc. The adopter box shall have a minimum height of 150mm.

MCB DBs Supplying, fixing, connecting & commissioning the following Compartmentalised MCB DISTRIBUTION BOARDS fixed flush with the wall. All MCB DBs shall be double door only. Note :- (i) B Curve MCB should be used for Lighting DB (ii) C Curve MCB should be used for Raw Power DB (iii) All Single Phase Distribution boards should be 7 Segment DB. (iv) All RCCB/RCBO should be with 30mA breaking capacity All DBs shall have an incoming adopter box (Powder coated) to receive wires in pipes / cables etc. The adopter box shall have a minimum height of 150mm.

LIGHT DISTRIBUTION BOARD (LDB) (i) Supply, erection, testing and commissioning of 8 way TPN DB with following specifications. INCOMER : 63 AMPS 4 P MCB .. 1 No. OUTGOING : 40 AMPS D P 30 mA RCBO .. 3 Nos. 6 AMPS SP MCB .. 24 Nos.

Supply, erection, testing and commissioning of 8 way SPN LPDB with following specifications. INCOMER : 32 AMPS DP 30mA RCBO .. 1 No. OUTGOING : 6/16 AMPS SP MCB .. 6Nos.

POWER DISTRIBUTION BOARD (PDB) (i) Supply, erection, testing and commissioning of 8 way TPN DB with following specifications. INCOMER : 63 AMPS 4 P MCB .. 1 No. OUTGOING : 40 AMPS D P 30 mA RCBO .. 3 Nos. 16/32 AMPS SP MCB .. 18Nos.

(i) Supply, erection, testing and commissioning of 8 way Vertical TPN DB with following specifications. INCOMER : 63 AMPS 4P MCB .. 1 No. OUTGOING : 32 AMPS TP MCB .. 5Nos. 32 AMPS SP MCB .. 9Nos.

(i) Supply, erection, testing and commissioning of 12 way Vertical TPN DB with following specifications. INCOMER : 63 AMPS 4P MCB .. 1 No. OUTGOING : 32 AMPS TP MCB .. 9Nos. 32 AMPS SP MCB .. 9Nos.

Cable / Terminations Supply, Laying, connecting and commissioning the following 1.1KV Grade YFY/YFY/YFY Underground cables with necessary clamps screws etc. and the cables shall be laid in trench/clamped along wall/column/laid in cable tray etc(the rates inclusive of suitable clamps, screws etc but exclusive of cable tray complete.

3.5C x 120 Sq Mm Al XLPE Cable

4C x 25 Sq Mm Al XLPE Cable

4C x 16 Sq Mm Al XLPE Cable

4C x 10 Sq Mm Al XLPE Cable

4C x 4 Sq Mm Cu XLPE Cable

3C x 4 Sq Mm Cu XLPE Cable

3C x 2.5Sqmm Cu XLPE Cable

3C x 6 Sq Mm Cu XLPE Cable

Supplying, terminating, connecting & commissioning the above underground cables with double compression type glands with all sockets etc complete Note : Single compression gland can be used upto 120 Sq mm cable and double compression gland can be used cable from 120 Sqmm and above. Supplying, terminating, connecting & commissioning the above underground cables with double compression type glands with all sockets etc complete

3.5C x 120Sqmm Al XLPE Cable

4C x 25 Sq mm Al XLPE Cable

4C x 16 Sq mm Al XLPE Cable

4C x 10 Sq mm Al XLPE Cable

4C x 4Sqmm Cu XLPE Cable

3C x 4Sqmm Cu XLPE Cable

C x 2.5Sqmm Cu XLPE Cable

3C x 6Sqmm Cu XLPE Cable

Earthing Supply erection testing and commissioning of Maintenance Free Earthing system comprising of Earth Electrode Cu Bonded Steel Rod 14.2mm dia x 3000mm- (250 Microns);Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height). ;14.2 / OD SS Clamp Both Side; Eco Safe carbon based backfill compound - 50 Pounds;and suitable clamp, as per IS 3043. CPRI test report should be produced at the time of supply including the inspection chamber,

LT Panel .. 2 Set Street Light Pole /High Mast Light .. 4 Set

Supplying, laying and connecting 25 x 6 mm. GI Flat laid in open fashion with necessary clamps,screws, interlinks etc for interconnecting of the earth pits

Supplying, laying and connecting 25 x 6 mm. GI Flat laid in open fashion with necessary clamps,screws, interlinks etc for Body Earthing of MLSB .

Supplying, laying and connecting 25 x 3 mm. GI Flat laid in open fashion with necessary clamps,screws, interlinks etc for Body Earthing of Street Light & High mast Light., ( Earth pit to earth link)

Supplying, laying and connecting 6 SWG GI wire laid in open fashion with necessary clamps,screws, interlinks etc for earthing of DBs, Street Light Poles & High Mast Light

Supplying, laying and connecting 25 x 6 mm. 400mm GI Flat AS EARTH LINK with necessary holes, complete set

Supplying, laying and connecting 25 x 3 mm. 400mm GI Flat AS EARTH LINK with necessary holes, complete set

SAFETY EQUIPMENTS Supplying, and laying 2000 mm. x 1000 mm x 3 mm. thick 3.3kV ISI Marked Synthetic mats to be laid in Front of the Panel Boards.

CABLE TRAY Supplying,erecting & connecting and commissioning Cable Trays of following measurements with necessary Box Channel for cable supports and other allied fabrication works. Fixing to concrete surfaces shall be done with the help of expandable type anchor fasteners capable of bearing a weight of 500 Kgs. Fixing to brick walls shall be done by grouting. The distance between two supports shall be 2000 mm. The materials and labour for grouting, cable supports and other allied fabrication work shall be supplied by the Contractor. Threaded rod will be considered for vertical support and MS angles will be considered for horizontal support. The price includes all support for cable tray and allied fabrication works..etc complete along with necessary earthing of the cable tray with necessary 2 Runs of 25x3mm GI Strip run along with cable tray for cable tray upto 450mm, 2Runs of 25x6mm GI strips for cable tray upto 750mm and 2Runs of 50x6mm above this. The price inclusive of GI strips and other accessories. MS Fabricated cable tray Fabrication of MS Cable tray as required comprising channels, angles, flats grouting, on coat of red oxide and two coats of synthetic paint. Complete set

150 x 50 x 1.6mm Ladder Type Cable tray

Supply & Installation of 150mmx100mm Powder coated Trunking 1.6mm thick with cover to be used for running the wires/cables near the DB locations.

LIGHT POINT WIRING Mains Wiring (DB to Switch Board) & DB to First point of MCB controlled light Supplying, wiring, connecting & commissioning the Light Points with 3 Core 2.5 Sqmm. PVC Insulated multi stranded FRLS copper conductor FRLS wires (one each for Phase, Neutral and earth) in Heavy duty MS Conduits laid in concealed fashion in wall / in ceiling with necessary clamps, screws, etc.,

PRIMARY POINT WIRING Supplying, wiring, connecting & commissioning the Primary Light Points with 3 Core 1.5 Sqmm. PVC Insulated multi stranded copper conductor FRLS wires (one each for Phase, Neutral and earth) in heavy duty MS Conduits in wall / ceiling with necessary clamps, screws, etc., including supplying and fixing 6 AMPS Switch in Manufacturer's mounting box fixed flush with the wall

SECONDARY POINT WIRING Supplying, wiring, connecting & commissioning the Secondary Light Points with 3 Core 1.5 Sqmm. PVC Insulated multi stranded copper conductor FRLS wires (one each for Phase, Neutral and earth) in heavy duty MS Conduits in wall / ceiling with necessary clamps, screws, etc. Note: Vendor should verify the lighting drawing for average length of primary and secondary lighting

RAW POWER WIRING

Supplying, wiring, connecting & commissioning the Light Points with 3 Core . PVC Insulated multi stranded copper conductor FRLS wires (one each for Phase, Neutral and earth) in heavy duty MS Conduits in wall / Ceiling partitions or laid in open fashion above false ceiling with necessary clamps, screws, etc.,

Supplying, and fixing 6/16 AMPS Switched Socket combined in 1.0 mm. thick in Manufacturer's mounting box fixed flush with the wall.

Supplying, and fixing 6 AMPS Switched Socket combined in 1.0 mm. thick in Manufacturer's mounting box fixed flush with the wall.

PVC Supply and laying of heavy duty PVC conduit concealed in wall/floors/ceilings with necessary clamps, screw with 1 Run of 16 SWG G.I. Fish wire

100mm heavy duty uPVC Conduit.

150mm heavy duty uPVC Conduit.

HUME PIPE Supply and laying of heavy duty Hume Pipe in underground at depth of 1.0Mtrs, excluding the earth excavation and refilling of the excavated soil, etc., complete as per site condition.

300mm Hume Pipe Class

MISCELLANEOUS

Preparation of CEIG Drawings, submission, getting drawing approval, arranging inspection, attending the defects with regard to electrical, getting safety certificate etc., The job includes submission of as built drawings. The contractor should submit 5set. It is the sole responsibility of the contractor to get the required sanctions & approvals from the CEIG & to submit the same to the Employer in the allocated time frame.

Excavation of cable trenches of required size as directed at site & providing sand bed, bricks etc., Back filling the same for laying L.T cables & removing the excess earth to the directed areas in site

LIGHT FIXTURES Installation testing and commissioning of light fixtures Labour Charges with the following Electrical Fittings

Polar 4m Single side - 145 Nos Polar 4m dual Arm - 2 Nos Nebula Midi - 102 Nos 10m High Mast Pole with ASTON 4(6X6) - 6 Nos Polar Quad Assy Bollard - 190 Nos. Power Grazer 32 - 90 Mtrs Form 17- 180 Mtrs Inform 33 slim - 100 Mtrs 7m high Mast with Aston 2 (16nos) - 6 Nos 20w Surface Mounted Light - 4 Nos 28w VALEO recessed downlight - 35 Nos 20w HERA recessed downlight - 10 Nos 20w DIYA recessed downlight - 19 Nos 10w DIYA recessed downlight - 16 Nos

JUNCTION BOX /ISOLATORS Supply erection testing and commissioning of junction box of following specification complete set for street light fixtures.

6 Way 16A Terminals in weather proof thermo plastic box with 3 Nos. Of cable glands suitable for 3C x 4 Sq Mm Cables make - Hensel.

Supply erection testing and commissioning of isolator in a sheet steel enclosure to be fixed near by the equipment in wall with all accessories complete as per following specification

32A 4P Isolator MCB Type

32A 4P Isolator MCB Type with IP55 protection

Landscapping Arrangements

Establishment of nursery in 6000 sqft. Which includes the temporary nursery shade net structure to grow saplings and seedlings in controlled environment, the procurement (of farm tools, seeds, plant nutrient supplements, farmyard manure, containers of various sizes etc.), and execution with preparation of planting beds, irrigation and growing saplings.

Earth work excavation for foundation in all kinds soils in varying depths (Digging of new trenches for hedge / edge planting, digging and removal of excavated earth from site complete)

Spreading of red soil, gravel or sand including watering and rolling which hand roller for every 75 mm thickness - including hire charges of roller and refilling the planting pits of required depth.

Supply & stacking of red earth at site to the departmental gauge for pre-measurements which is of light textured, crystalline, porous and friable and not of generally acidic or neutral but not of alkaline and should be fertile, including seigniorage charges, cost of transportation, loading, unloading, stacking and inclusive of all taxes etc., complete.

Supplying and stacking of sand (Supply & stacking of sand at site to the departmental gauge for pre- measurements obtained from natural disintegrated rock which has been deposited by streams or glacial agencies composed of hard silicons material and should be clean,sharp and angular type free of adherent coatings)

Supply of well decomposed Farm yard Manure in a powdery form, devoid of soil sand, stones, plastics and other materials, highly nutrient and which supports plant growth

Mixing charges of Red soil, sand and Farmyard manure uniformly (1:1:1) for Preparation of soil mixture (excluding material cost)

Plant Procurement & Planting

Supplying and Planting of Bismarckia palm variety of height 180-210 cm in polythene bag of dia 30cm including supporting stack of 5cm dia casurina pole of 10' height including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Caryota palm variety of height 180-210 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Cyrtostachys renda palm variety of height 180-210 cm in polythene bag of dia 30cm, including supporting stack of 5cm dia casurina pole of 10' height, including loading and unloading charges, ansportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Livistona rotundifolia palm variety of height 180- 210 cm in polythene bag of dia 30cm including supporting stack of 5cm dia casurina pole of 10' height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Wodyetia bifurcata (Foxtail palms) palm variety of height 180-210 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Albizia tree (Albizia Lebbeck- Shirish) sapling of height 180 - 2 40 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Acacia tree sapling of height 180-2 40 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Polyalthia longifolia -Ashoka tree sapling of height 180 -240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Bael – Aegel marmelos tree sapling of height 180 - 240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Bauhinia purpurea -Orchid tree sapling of height 180 - 240cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Cassia fistula- Golden Shower tree sapling of height 180 - 240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, tansportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Couroupita guianensis – Cannon Ball tree sapling of height 180 - 240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Cordia sebestena- Geiger tree sapling of height 180 -240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Erythrina tree sapling of height 180 - 240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Hibiscus tilliaceus tree sapling of height 180 - 240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed bythe site in-charge

Supplying and Planting of Lagerstroemia tree -Common Crape Myrtle sapling of height 180 - 240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, ransportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Lannea coromandelica tree sapling of height 180 - 240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Pongamia pinnata-Pungam tree sapling of height 180 - 240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, tansportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Saraca indica- Sita Ashok tree sapling of height 180 - 240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Shenbagam tree sapling of height 180 - 240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Tabebuia argentea tree sapling of height 180 - 240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of apling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Tabebuia avellanedae tree sapling of height 180 -240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by thesite in-charge.

Shrubs

Planting of Aralia ornamental foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Bamboo grass ornamental foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by thesite in-charge.

Planting of Caesalpinia pulcherrima foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by thesite in-charge

Planting of Caladium kind ornamental foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Crotons - Codiaeum variegatum ornamental foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Cyprus Plant ornamental foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by thesite in-charge.

Planting of Galphimia Plant foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Hemelia pattens foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Jatropha gossypifolia- Jetropha Plant foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Lavender Plant ornamental foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Meinia erecta foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Nerium oleander foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Nerium oleander dwarf foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed bythe site in-charge

Planting of Pachystachys lutea -Lollipop plant ornamental foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Parijatham - Nycatanthus arbortristis ornamental foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Pedilanthus ornamental foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Philodendron varieties ornamental foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Purple Fountain Grass –Pennisetum setaceum 'Cupreum' (rubrum) foliage shrub variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Syzygium myrtifolium Plant ornamental foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Tabernum dwarf foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Tabernum green foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Tabernum varigated foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Tecoma capensis foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Adena calama foliage creeper variety of height 15-20 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Ficus benjamina green ornamental foliage Specimen plant variety of height 105 -120 cm in polythene bag of dia 30 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Furcarea ornamental foliage Specimen plant variety of height 105- 120 cm in polythene bag of dia 30 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Heliconium foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Cymbopogon citratus -Lemon grass Herbal plant variety of height 20-25 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Seeni thulasi Herbal plant variety of height 20-25 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Thiruneetru pachilai Herbal plant variety of height 20 -25 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Vinca rosea Herbal plant variety of height 20-25 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Aquatic Plants

Planting of Acalypha varieties ornamental foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Canna indica varigated-Indian Shot Plant foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by thesite in-charge

Planting of Purple Fountain Grass –Pennisetum setaceum 'Cupreum' foliage shrub variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Heliconium foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Ixora hybrid foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Vetiver Herbal plant variety of height 20-25 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Groundcovers

Planting of Lilly – Zephyranthus lilly (Rain lilly) shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Ophiopogon japonicus-Ophiopogon ornamental foliage Ground cover variety in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in- charge

Planting of Tradescantia spathacea 'Nana'-Tradescantia ornamental foliage Ground cover variety in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Verbena foliage Ground cover variety in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Wedelia trilobata foliage Ground cover variety in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Eranthemum varites ornamental foliage shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Aerva ornamental foliage Ground cover variety in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc asdirected by the site in -charge

Planting of Alternanthera varigated ornamental foliage Ground cover variety in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Hemigraphis ornamental foliage Ground cover variety in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of sapling at\ site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Portulaca ornamental foliage Ground cover variety in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Aloe vera Herbal plant variety of height 20-25 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling ofexcavated earth etc as directed by the sitein-charge

Planting of Insulin Herbal plant variety of height 20-25 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Karisalankanni Herbal plant variety of height 20-25 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Mudakathan Herbal plant variety of height 20-25 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling ofexcavated earth etc as directed by the site in-charge.

Planting of Omavalli Herbal plant variety of height 20-25 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the sitein-charge

Planting of Orthosiphon (Poonai Mesai) Herbal plant variety of height 20-25 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by thesite in-charge

Planting of Pirandai Herbal plant variety of height 20-25 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the sitein-charge

Planting of Thippili Herbal plant variety of height 20-25 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling ofexcavated earth etc as directed by the sitein-charge

Planting of Thotta sinungi Herbal plant variety of height 20-25 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling ofexcavated earth etc as directed by the site in-charge.

Planting of Thuthuvalai Herbal plant variety of height 20-25 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Vallarai Herbal plant variety of height 20-25 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Climbers and Creepers

Planting of Clerodendrum thomsoniae foliage creeper variety of height 15-20 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Garlic vine - Mansoa alliacea/ Psuedocalymma alliacaum foliage creeper variety of height 15 -20 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Planting of Jasmin grandiflourm foliage creeper variety of height 15-20 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Passiflora Edulis foliage creeper variety of height 15-20 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site,earth work excavation of required size, planting of sapling, refilling of excavatedearth etc as directed by the site in-charge

Planting of Rangoon foliage creeper variety of height 15-20 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Thumbergia foliage creeper variety of height 15-20 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Planting of Cynodon dactylon (Arugampul) Grass including necessary soil preparation, transportation, loading and unloading charges etc., as directed by the site in-charge.

Planting of Shade grass (Bouteloua dactyloides-Buffalo grass) including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Trees

Supplying and Planting of Artocarpus altilis-Breadfruit sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Anthocephalus cadamba– Kadambu tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Azadirachta indica – Neem tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Alstonia Scholaris- Elilaipaalai tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Artocarpus hirsutus- wild jack sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Calophyllum inophyllum- Punnai tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Dalbergia latifolia- Rosewood tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Elaeocarpus serratus-Aathuvari tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Ficus benghalensis- Aalan tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Ficus racemosa- Athi tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Ficus religiosa- Arasau tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Gmelina arborea- Kumil tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Melia azedarach- Malabar Neem tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Mimusops elengi- Magizham tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Madhuca longifolia- Illuppai tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Phyllanthus emblica-Emblica sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Psidium guajava-Common guava sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Pterocarpus marsupium- Vengai tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Pterocarpus santalinus -Red sandars tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Peltophorum pterocarpum -Copper pod sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Syzygium cumini- Naval tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Swietenia mahagoni- Mahogany tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Terminalia arjuna- Neermaruthu tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Tectona grandis- Teak tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Thespesia populnea- Poovarasu tree sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and Planting of Terminalia catappa- Badam sapling of height 4' (122cm) in polythene bag of size 16x 30 cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Trees

Supplying and Planting of Barringtonia acutangala (Freshwater mangrove) sapling of height 3ft (91.44 cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Butea monosperma (Flame-of-the-forest) sapling of height 2ft (60.96 cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Bauhinia racemosa (Bidi leaf tree) sapling of height 2-3ft (60.96-91.44 cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Supplying and Planting of Cassine glauca (Ceylon Tea) sapling of height 2ft (60.96 cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Cananga odorata (Ylang-ylang) sapling of height 3-4ft (91.44 -121.92cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Corypha umbraculifera (Talipot Palm) sapling of height 3ft (91.44 cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Dalbergia sisoo (North Indian rosewood) sapling of height 3-4ft (91.44 -121.92cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of FIlicium decipiens (Fern Tree) sapling of height 3-4ft (91.44 -121.92cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Ficus hispida (Hairy Fig) sapling of height 3-4ft (91.44 -121.92cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Ficus microcarpa (Malayan Banyan) sapling of height 2-3ft (60.96-91.44 cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Hura crepitans (Sandbox Tree) sapling of height 2-3ft (60.96-91.44 cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Manilkara hexandra (Ceylon wood) sapling of height 2ft (60.96 cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Mangifera indica (Mango tree) sapling of height 3ft (91.44 cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Nyctanthes arboritis (Coral jasmine) sapling of height 2 ft (60.96 cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Pinanga dicksonii (Kattu Kamuku) sapling of height 3-4ft (91.44 -121.92cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Pandanus odoratissimus (Fragrant screw-pine) sapling of height 2-3ft (60.96-91.44 cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Sapindus emarginatus (Notched Leaf Soapnut) sapling of height 3-4ft (91.44 -121.92cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Terminalia bellirica (Baheda) sapling of height 3ft (91.44 cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Vitex negundo (Chaste tree) sapling of height 3-4ft (91.44 -121.92cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Ziziphus mauritiana (Indian jujube) sapling of height 2ft (60.96 cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Supplying and Planting of Ziziphus xylopyrus ( Kath Ber) sapling of height 2ft (60.96 cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Shrubs

Planting of Agave angustifolia-Variegated Caribbean Agave kind ornamental foliage shrub variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation ,stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Alpinia zerumbet-Variegated Shell Ginger variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Barleria prionitis-Porcupine flower variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Planting of Carissa carandas- Kerenda variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Chamaerops humilis-Fan palm variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Clerodendrum inerme-Wild Jasmine variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Canna indica orange-Indian Shot variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

planting of Canna indica red-Indian Shot variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Carmona retusa-Scorpion Bush variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Planting of Catharanthus roseus- Madagascar periwinkle variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Planting of Cuphea hyssopifolia-Mexican Heather variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Planting of Costus speciosus-Crepe Ginger variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Dodonaea viscosa-Golden juniper variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Duranta erecta- Duranta variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Planting of Euphorbia antiquorum-Triangular Spurge variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Euphorbia milii-Crown of thorns variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Eugenia uniflora-Pitanga variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Garcinia spicata-Bitter garcinia variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Planting of Gardenia resinifera-Brilliant Gardenia variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Planting of Heliconia collinsiana -Lobster-claws variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Hedychium coronarium-White ginger lily variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, refilling of excavated earth etc as directed by the site in -charge

Planting of Hymenocallis littoralis-Beach Lily variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Heliconia psittacorum -Parakeet Flower variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Planting of Heliconia psittacorum x-Parakeet Flower variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Planting of Heliconia rostrata-Lobster Claw variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Hymenocallis speciosa-Spider Lily variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Heliconia stricta-Dwarf Jamaican variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Planting of Ixora pavetta-The torch tree variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Leucas aspera-Thumbai variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, refilling of excavated earth etc as directed by the site in -charge

Planting of Lawsonia inermis-Mehndi variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, refilling of excavated earth etc as directed by the site in -charge

Planting of Murraya paniculata-Orange jasmine variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, refilling of excavated earth etc as directed by the site in -charge.

Planting of Hedyotis verticillaris-Starviolet variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Planting of Plectranthus amboinicus- Indian borage variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Planting of Petunia integrifolia-Petunia species variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Pentas lanceolata- Star-cluster variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Pennisetum green variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Rhapis excelsa-Lady Palm variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Ruellia tuberosa-Minnieroot variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, refilling of excavated earth etc as directed by the site in -charge

Planting of Senna auriculata-Cassia auriculata variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Planting of Spathiphyllum-Peace lily variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Strelitzia reginae -Bird-of-paradise flower variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, refilling of excavated earth etc as directed by the site in -charge

Planting of Sansevieria roxburghiana-Indian Bowstring Hemp variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Schoenoplectus supinus-Wood club-rush variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Stachytarpheta jamaicensis-Blue snake weed variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Yucca gloriosa-Mound lily variety of height 30 -45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Aquatic Plants

Planting of Colocasia esculenta-Taro variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, refilling of excavated earth etc as directed by the site in-charge

Climbers and Creepers

Planting of Clitoria ternatea -Asian pigeonwings/ aprajita climber variety of height 15-20 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Trees

Supplying and Planting of Commiphora wightii ( Guggul) sapling of height 6ft (182.88 cm) in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Shrubs

Planting of Alpinia calcarata foilage shrub variety of height 30.48-91.44 cm (1'-3') in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Heliconia schiedeana foliage shrub variety of height 30.48-91.44 cm (1'-3') in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Aquatic Plants

Planting of Acorus calamus variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Heliconia stricta variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, refilling of excavated earth etc as directed by the site in-charge

Planting of Nymphaea pubescens variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Ruellia tuberosa variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, refilling of excavated earth etc as directed by the site in-charge

Planting of Typha angustifolia variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Planting of Typha latifolia variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Groundcovers

Planting of Barleria cristata shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Centella asiatica shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Cordyline fruticosa shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Costus speciosus shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Codiaeum variegatum shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Euphorbia milii shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Planting of Euphorbia tirucalli shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge

Planting of Ocimum basilicum shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Plectranthus amboinicus shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Pentas lanceolata shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Plumbago zeylanica shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Spathiphyllum shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Sansevieria roxburghiana shrub variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Lighting Fixtures List (LANDSCAPE - AREA)

supply of polar Pole street light with 30W LED WW,NW,CW BA:Type II, Polycarbonate Optical Lens, Product dimensions 600 x 120 x 240mm, 30W / 4636 lm / 3000K / CRI 80 / Beam Angle - TYPE IIoptics / IP 65 / IK 09, Klite Make :- KL-4417 or Equivalent

Supply of Quadra Lighting Pole of 80X80 series and Built-in control box with cast aluminium service door and safety rope , The control gear tray is prewired with MCB, terminal connectors for loop-in / loop-out arrangement, Base plate made of steel grade E250 & foundation bolt M16x300 of grade 4.6 , CE - Conformity mark, Klite Make :- KP- 4773 and KP-9204 or Equivalent

Supply of focus light fixture with Extruded Aluminium / Silicon Gasket / Glass Diffuser / 7W / 750 lm / 3000K / CRI 80 / Beam Angle 40° / IP 66 / IK 06 K Lite Make :- KL-4266 or Equivalent

Supply of inground light fixture with Die cast Aluminium Housing with 316 Grade Stainless Steel Frame / Honeycomb louvre / Silicon Gasket / Glass Diffuser 8 mm Thick / 9W / 750 lm / 3000K / CRI 80 / Beam Angle 40° / IP 67 / IK 09 K Lite Make :- KL-4146 or Equivalent

Supply of focus light fixture with Extruded Aluminium / Silicon Gasket / Glass Diffuser / 7W / 750 lm / 3000K / CRI 80 / Beam Angle 40° / IP 66 / IK 06 K Lite Make :- KL-4266 or Equivalent

Supply of 40W LED Amber,WW,NW BA:30°,60°, Clear Polyurethane Encapsulation, Dimension-2005 x 25 x 32mm K Lite Make :- KL-3559 or Equivalent

Supply of LED driver SMPS with 24V -DC - 150W - IP 67 Power Supply suitable for KL-3559 , Klite Make :- KL-8198 or Equivalent

Supply of MALE Connector pin suitable for KL-3559, Klite Make :- KL-8320 or Equivalent

Supply of End Cap to terminate the line suitable for KL- 3559, Klite Make :- KL-8319 or Equivalent

Supply of LED bollard light fitting of 12W with 1000mm height and CCT-3000K, Luminaire body made of square 100X100mm aluminium tube with aluminium components and SS foundation bolts, Lamp compartment encased in polycarbonate optical cover, CRI-80, Klite Make :- KL-4729 or Equivalent

Supply of 10W LED PU Encapsulation light fixture `WW,NW BA:120°, Clear Polyurethane Encapsulation K Lite Make :- KL-3256 or Equivalent

Supply of LED driver SMPS with 24V -DC - 150W - IP 67 Powersupply (1 driver for 5 Mtrs) suitable for KL-3256 , Klite Make :- KL-8198 or Equivalent

Supply of MALE Connector pin suitable for KL-3256, Klite Make :- KL-8320 or Equivalent

Supply of End Cap to terminate the line suitable for KL- 3256, Klite Make :- KL-8319 or Equivalent

Supply of Led Spot under water light fixture with Complete housing made of marine grade stainless steel #316 • PCB made of excellent heat conductivity aluminium, coefficient of heat conductivity >2.0w/mk • Luminaire is hard wired for single colour 2 x 1.0sqmm / RGB 4 x 0.75sqmm 3 metres water resistant cable. • Recommended installation depth upto 1 metre below the water surface. K Lite :- Kl-6740 or Equivalent

Supply of LED driver SMPS with 12V -DC - 30W - IP 67 Power Supply suitable for KL-6740 1 driver for 2 fittings , Klite Make :- KL-8191 or Equivalent Power Supply

Supply of LED bollard light fitting of 12W with 1000mm height and CCT-3000K, Luminaire body made of square 100X100mm aluminium tube with aluminium components and SS foundation bolts, Lamp compartment encased in polycarbonate optical cover, CRI-80, Klite Make :- KL-4729 or Equivalent

supply of 30W LED Amber,WW,NW BA:30°,60°, Clear Polyurethane Encapsulation, Dimension-1505 x 25 x 32mm K Lite Make :- KL-3558 or equivalent

supply of 40W LED Amber,WW,NW BA:30°,60°, Clear Polyurethane EnDimension-1505 x 25 x 32mm/2005 x 25 x 32mm K Lite Make :- KL-3559 or Equivalent

Supply of LED driver SMPS with 24V -DC - 150W - IP 67 Powersupply (1 driver for 5 Mtrs) suitable for KL-3256 , Klite Make :- KL-8198 or Equivalent

Supply of MALE Connector pin suitable for KL-3256, Klite Make :- KL-8320 or Equivalent

Supply of End Cap to terminate the line suitable for KL- 3256, Klite Make :- KL-8319 or Equivalent

Supply of 30W LED Amber,WW,NW BA:30°,60°, Clear Polyurethane Encapsulation, Dimension-1505 x 25 x 32mm K Lite Make :- KL-3558 or Equivalent

Supply of LED driver SMPS with 24V -DC - 150W - IP 67 Powersupply (1 driver for 5 Mtrs) suitable for KL-3256 , Klite Make :- KL-8198 or Equivalent

Supply of MALE Connector pin suitable for KL-3256, Klite Make :- KL-8320 or Equivalent

Supply of End Cap to terminate the line suitable for KL- 3256, Klite Make :- KL-8319 or Equivalent

supply of polar Pole street light with 60W LED WW,NW,CW BA:Type II, Polycarbonate Optical Lens, Product dimensions 600 x 120 x 240mm, 30W / 4636 lm / 3000K / CRI 80 / Beam Angle - TYPE IIoptics / IP 65 / IK 09, Klite Make :- KL-4419 or Equivalent

Supply of Quadra Lighting Pole of 80X80 series and Built-in control box with cast aluminium service door and safety rope , The control gear tray is prewired with MCB, terminal connectors for loop-in / loop-out arrangement, Base plate made of steel grade E250 & foundation bolt M16x300 of grade 4.6 , CE - Conformity mark, Klite Make :- KP- 4773 and KP-9204 or Equivalent

Supply of Waterproof IP67 LED light for outdoor linear lighting applications 20W LED WW,NW BA:120°, Translucent Polyurethane Encapsulation, Dimensions 500/2000 x 80 x 40mm, Klite Make:- KL-3622 or Equivalent

Supply of LED driver SMPS with 24V -DC - 150W - IP 67 Powersupply (1 driver for 5 Mtrs) suitable for KL-3256 , Klite Make :- KL-8198 or Equivalent

Supply of MALE Connector pin suitable for KL-3256, Klite Make :- KL-8320 or Equivalent

Supply of End Cap to terminate the line suitable for KL- 3256, Klite Make :- KL-8319 or Equivalent

Supply of 10W LED PU Encapsulation light fixture `WW,NW BA:120°, Clear Polyurethane Encapsulation Klite Make :- KL-3256 or Equivalent

Supply of LED driver SMPS with 24V -DC - 150W - IP 67 Powersupply (1 driver for 5 Mtrs) suitable for KL-3256 , Klite Make :- KL-8198 or Equivalent

Supply of MALE Connector pin suitable for KL-3256, Klite Make :- KL-8320 or Equivalent

Supply of End Cap to terminate the line suitable for KL- 3256, Klite Make :- KL-8319 or Equivalent

Supply of 20W LED Amber,WW,NW BA:30°,60°, Clear Polyurethane Encapsulation, Dimension-1005 x 25 x 32mm/2005 x 25 x 32mm K Lite Make :- KL-3557 or Equivalent

Supply of LED driver SMPS with 24V -DC - 150W - IP 67 Powersupply (1 driver for 5 Mtrs) suitable for KL-3256 , Klite Make :- KL-8198 or Equivalent

Supply of MALE Connector pin suitable for KL-3256, Klite Make :- KL-8320 or Equivalent

Supply of End Cap to terminate the line suitable for KL- 3256, Klite Make :- KL-8319 or Equivalent

supply of polar Pole street light with 60W LED WW,NW,CW BA:Type II, Polycarbonate Optical Lens, Product dimensions 600 x 120 x 240mm, 30W / 4636 lm / 3000K / CRI 80 / Beam Angle - TYPE IIoptics / IP 65 / IK 09, Klite Make :- KL-4419 or Equivalent

Supply of Quadra Lighting Pole of 80X80 series and Built-in control box with cast aluminium service door and safety rope , The control gear tray is prewired with MCB, terminal connectors for loop-in / loop-out arrangement, Base plate made of steel grade E250 & foundation bolt M16x300 of grade 4.6 , CE - Conformity mark, Klite Make :- KP- 4773 and KP-9204 or Equivalent

SPORTS AREA

Supply of LED flood light having 4 x 60W LED WW module BA: 60°, Polycarbonate Optical Lens, Dimensions 342 x 135 x 365mm IP67 and IK07, Klite make :- KL-6788 or Equivalent

Supply of LED flood light having 4 x 60W LED WW module BA: 60°, Polycarbonate Optical Lens, Dimensions 342 x 135 x 365mm IP67 and IK07, Klite make :- KL-6788 or Equivalent

Supply of LED flood light having 4 x 60W LED WW module BA: 60°, Polycarbonate Optical Lens, Dimensions 342 x 135 x 365mm IP67 and IK07, Klite make :- KL-6788 or Equivalent

Supply of Customised 10 Mtrs Pole With Foundation Bolts made up MS with powder coated Graphite Grey Finish, •All pole sections are welded using special v groove technique by certified welders using high end MIG welding processes. • Built-in control box with cast aluminium service door and safety rope. • Die cast aluminium door is contoured to the shape of the pole with a silicone rubber gasket. • The control gear tray is prewired with MCB, terminal connectors for loop-in / loop-out arrangement. • The foundation bolt holes in the base plate are designed to be elongated for fine adjustments / alignment of the pole during installation. • Base plate made of steel grade E250 & foundation bolt of grade 4.6 • CE - Conformity mark Klite make :- KL-4707 or Equivalent

INTERIOR - GALLERY

Supply of LED pullout light fixture with body of zoom wall washer made of die-cast aluminium which has excellent mechanical strength, aluminium heat sink for better thermal management. • Adopting reflector which is with excellent optics effect and excellent spot light effect. • The lamp can be positioned at various angles for the directional light thrown in wall washer applications. • Luminaire integrated with 40W LED. • Cable entries for through-wiring of mains supply cable. • Integral constant current power supply. • Suitable for operation on 240V, 50Hz single phase ac supply. LED 28W K Lite Make :- KL-3352

Supply of LED downLight recessed downlight - Indoor luminaire with wide beam light distribution. • Luminaire is made of die-cast aluminium for better thermal management. • Vacuum - metalized reflector with anti scratch protective layer and added diffuser for glare free, uniform light distribution. • High PF constant current LED driver. • Cable entries for through-wiring of mains supply cable. • Suitable for operation on 240V, 50Hz single phase ac supply. LED 20W K Lite Make :- KL-3352 or Equivalent

Supply of LED recessed downlight Luminaire made of die-cast aluminium has excellent mechanical strength, aluminium heat sink for better thermal management. • Reflector with excellent optical effects. • Cable entries for through-wiring of mains supply cable. • Integral constant current power supply LED 20W - IP 65 K Lite Make :- KL-4242 or Equivalent

Supply of LED Recessed Downlight Luminaire made of die-cast aluminium has excellent mechanical strength, aluminium heat sink for better thermal management. • Reflector with excellent optical effects. • Cable entries for through-wiring of mains supply cable. • Integral constant current power supply LED 10W - IP 65, Klite Make :- KL-4141

Supply of Customised 10 Mtrs Pole With Foundation Bolts made up MS with powder coated Graphite Grey Finish, •All pole sections are welded using special v groove technique by certified welders using high end MIG welding processes. • Built-in control box with cast aluminium service door and safety rope. • Die cast aluminium door is contoured to the shape of the pole with a silicone rubber gasket. • The control gear tray is prewired with MCB, terminal connectors for loop-in / loop-out arrangement. • The foundation bolt holes in the base plate are designed to be elongated for fine adjustments / alignment of the pole during installation. • Base plate made of steel grade E250 & foundation bolt of grade 4.6 • CE - Conformity mark Klite make :- KL-4707 or Equivalent

Supply of LED flood light having 2 x 60W LED WW module BA: 60°, Polycarbonate Optical Lens, Dimensions 342 x 135 x 245mm IP67 and IK07, Klite make :- KL-6789 or Equivalent

Supply of Customised 10 Mtrs Pole With Foundation Bolts made up MS with powder coated Graphite Grey Finish, •All pole sections are welded using special v groove technique by certified welders using high end MIG welding processes. • Built-in control box with cast aluminium service door and safety rope. • Die cast aluminium door is contoured to the shape of the pole with a silicone rubber gasket. • The control gear tray is prewired with MCB, terminal connectors for loop-in / loop-out arrangement. • The foundation bolt holes in the base plate are designed to be elongated for fine adjustments / alignment of the pole during installation. • Base plate made of steel grade E250 & foundation bolt of grade 4.6 • CE - Conformity mark Klite make :- KL-4707 or Equivalent

Supply of LED flood light having 2 x 60W LED WW module BA: 60°, Polycarbonate Optical Lens, Dimensions 342 x 135 x 245mm IP67 and IK07, Klite make :- KL-6789 or Equivalent

Supply of LEDSurface Mounted Light, LED 20W module BA:120°, Translucent Polystyrene diffuser, Dimensions : Ø177 x 43mm IP40 and IK07, Klite make :- KL- 3613 or Equivalent

Irrigation Works (Manual Irrigation Works)

Pipes Work: Supply, laying & commissioning in position PVC pipe conforming to IS:4985:2000 and suitable for the respective working pressures without all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge (Finolex/ Supreme)

PVC pipe 110mm-10 kg/cm² -(Pump Room Connection)

PVC pipe 90mm-10 kg/cm²

PVC pipe 75mm-10 kg/cm²

PVC pipe 63mm-6 kg/cm²

PVC pipe 50mm-6 kg/cm²

PVC pipe 40mm-6 kg/cm²

PVC pipe 25mm-10 kg/cm²

PVC pipe 20mm-10 kg/cm²

Earth work excavation and refilling 300x450mm

DRIP & ACCESSORIES

Supply, Fixing & Commissioning of flexible,16mm Blank tubing - XT Drip Line Blank With Greater Flexibility is Easier to Install & Saves Time , and resistance to UV damage and algae growth black, green, brown in colour and wall thickness 1.2mm, pressure rating 0.58 to 4.14 Bar etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. With All Fittings.

Supply, Fixing & Commissioning of Emitters pressure compensating for Consistent & Reliable Flow with self flushing emitter, and self piercing barbs, flow rates 2 lph or 4 lph or 8 lph UV resistant colour coded with working pressure 1.0 to 3.5bar etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply, Fixing & Commissioning of flexible 16mm inline tubing with resistance to UV damage, algae growth black/ green/ brown in colour, Longer lateral run length with flow rate 2.3lph to 3.4 lph, pressure rating 0.58 to 4.1 bar , Dripper Spacing at 30 cm , 40 cm & 60 cm Spacing wall thickness 1.2mm etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.With All Fittings.

Supply,Fixing & commissioning of 2" Large Capacity AND Type Disc / Screen Filters for sub main filtration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 110 gpm (25m³/hr), Maximum Pressure 116 psi (8 bar),Maximum Temperature Up to 140ºF (60ºC) etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 63mm/50mm/40mm dia self-closing flushing valves that are installed at the end of the irrigation line for effecting flushing of the line at the beginning of every irrigation cycle, thus avoiding the clogging of the emitters /sprinklers through removal of particles, sediments and other impurities from the water. etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 9 - Gauge Galvanised Steel Rod Comes Sharp tips provide easy insertion into all soil types, Staple Distribution Tubing , XF Drip Line or XBS Tubing to Finished Grade. Notched Sides. Corrosion -Resistant of TIE DOWN STAKE etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

SPRINKLERS & ACCESSORIES

Supply,Fixing & commissioning of Pop up spray head RD 1804 SAM PRS Series Spray bodies, with Rotary nozzle with capable of covering 2.4m -7.3m at 1.4 - 3.8 Bars pressure, Rotary nozzles shall have hand adjustable ( without tools) radius and arc-45 to 270 degree or full circle True flushing mechanism,Thick streams and large water droplet & Low precipitation rate Triple Blade Wiper Seal precisely balances flushing, flow-by and debris protection to optimise performance and durability at pop-up and retraction. Precision-controlled flushing at pop-up and retraction clears debris, ensuring positive stem retraction in all soil types. Unique debris pockets hold grit in place, removing it from circulation and preventing long-term damage. Parts resistant to corrosion in treated recycled water containing chlorine. Pop spray body shall withstand upto 6.9 bar.Built-in Seal-A-Matic™ (SAM) check valve. Traps water in lateral pipes in elevation changes of up to 14 feet (4.2 m). PRS Maintains constant outlet pressure at 30 psi or 45 psi at varying inlet pressures

Supply,Fixing & commissioning of 5004 PLUS SAM PRS Series Rotor pop up sprinkler full/part circle having radius of 6.7m - 12m @ 2.5 - 4.5 bar with discharge of 0.09 - 0.61 ltr./sec. the sprinklers having Arc Adjust thru Top Cover w/ Std. Screwdriver The sprinkler is gear driven rotary type with 3/4" bottom inlet. Oversized wiper seal, Rain Curtain technology, gentle close-in watering and Self-flushing arc adjustment port and also having tapered riser stem with Wiper Seal The sprinkler shall have Plus (PL) Flow shut off, 45 psi pressure regulator with flow optimizer technology, internal Seal - A - Matic device which prevents low head drainage (upto 3.1m) & hence puddling & erosion. The body of sprinkler is of non - corrodible, heavy duty, ABS plastic.O-ring Slip Clutch,Ratcheting Slip Clutch,Side Inlet Available 6" and 12",Turret-mounted ID Plugs,Flow Stop Available,Non-potable water indication available etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge

Supply,Fixing & commissioning of 1/2" Pop up Connecting Swing joint Assembly. The tubing shall be made of polyethylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/cm2 at 43oC and a surge pressure of 16.6 kg/cm2. Flex pipe textured for wet conditions.The fittings shall be made of UV resistant thermo plastic etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge..SA Series.

Supply,Fixing & commissioning of 3/4" Pop up Connecting Swing joint Assembly. The tubing shall be made of polyethylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/cm2 at 43oC and a surge pressure of 16.6 kg/cm2. Flex pipe textured for wet conditions.The fittings shall be made of UV resistant thermo plastic etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge..SA Series.

Supply,Fixing & commissioning of Imported HDPE service saddle of varying size upto 63mm dia with pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

VALVES & ACCESSORIES

Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem,Stem O-Ring, non mechanical ,ball Seals with backing seals and with a base which permits maximum penetration into the valve of size 63mm with pressure rating PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of PVC Single Union Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem, Stem O-Ring, non mechanical ,ball Seals with backing seals and a base which permits maximum penetration into the valve of size 50mm. with pressure rating PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of a double acting air and vacuum release 1/2 " Air release valve . The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar. Only for Drip Irrigation etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of a double acting air and vacuum release 2 " Air release valve . The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 10 KSC etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 6"Round box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & Having Dimensions @ Top Opening :6 1/8" Dia & Bottom Opening 8 5/8" Dia etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 10" Round Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & Having Dimensions @ Top Opening 10" Dia & Bottom Opening 12 13/16" Dia etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 12" Rectangular Standard Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & having Dimensions @ Top Opening:18 1/4" L X 13" W & bottom opening :21 1/4" L X 15 15/16"W X 12" H etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 18'' Jumbo Rectangular Standard Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & having Dimensions @ Top Opening:18 1/4" L X 13" W & bottom opening :21 1/4" L X 15 15/16"W X 12" H etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 3/4th inch Quick coupling valve made up of solid brass with locking cover corrosion resistant and stainless steel spring etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 3/4th inch Key threads into top of QCV to provide water access etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge

Supply,Fixing & commissioning of 3/4th inch Hose Swivel Made up of Solid Brass Swivels up to 360 degrees to allows hose to be pulled in any direction & Also to prevent Hose Damage etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

FILTRATION UNIT

Supply,Fixing & commissioning of 3" manual disc Filter, Pressure Differential Based, 100 Micron, Flanged End & all required Accessories Capacity of 3" - 50m3 \Hr etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

PUMPING UNIT

Supply,Fixing & commissioning of Monobloc or openwell submersible pumpset of having discharge and head of design flow with pressure gauge, UPVC sch 40 - suction & delivery manifold and mounted on a baseframe with proper supports etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Duty of Pump : 8.00 lPS Pressure Head Range = 55.00 -60.00 Mtr No. of Pumps : 1 Working + 1 Standby

Supply,Fixing & commissioning of Starter panel suitable for pumpset having panel box fixed along with following accessories MK1 or MK2 DOL / Star Delta (L&T make),start / stop push buttons (L&T make) and Relay Contactor etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply ,Fixing & Commissioning of Control Cable for Pump Set - 3 core X 4 Sq.mm Copper

Supply,Fixing & commissioning of 2.5'' control Valve, Butterfly Valve VAN Stone flange & Tail Piece in mainline for bypass and flow diversion of approved quality with pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge

Supply,Fixing & commissioning of 3'' control Valve, Butterfly Valve VAN Stone flange & Tail Piece in mainline for bypass and flow diversion of approved quality with pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of 3'' Non Return Valves to prevent backflow have flap type or spring type with pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of Pressure release valve 2" with pressure setting from 0 to 7 Bar etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of Pressure reducing valve 3" with pressure setting from 0 to 7 Bar etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Automation Equipments

Supply,Fixing & Commissioning of Direct burial 14 Awg x 2 Maxi cable with PVC insulated UL stndard 493 with impregnated polyethene jacket and soft annealed tin coated copper confirming to ASTM B-33 for two way communication between decoder controller and decoders complete

Supply,Fixing & Commissioning of PVC pipe 25mm-10 kg/cm² including fittings and accessories

Supply,Fixing & commissioning Of Two wire control system ESP-LX IVM having solenoid and decoder in one unit as interface & Maximum Two Wire Connectors Between Communication Cable and Solenoid Valve,supports up to 60 stations standard Up to four 2-Wire paths, plus flow sensing and advanced flow management tools. supports upto 5 flow sensor inputs and the removable front panel is programmable under battery power. water management features like: • Learn Flow utility and flow usage totalizer help optimise water usage, • FloWatchTM protection for high and low flow conditions , FloManagerTM manages hydraulic demand, makes full use of available water to turn on as many stations as possible without exceeding water supply and reduces the total time to complete irrigation cycles. SimulStationsTM allows stations to operate at the same time; up to 8 with LX-IVM • Cycle+Soak™ by station, • Rain Delay up to 30 days, • 365-Day Calendar Day Off (up to 5 days), • Station Delay by program, • Normally Open or Normally Closed Master, Valves programmable by station; up to 5 with LX-IVM • Optional Weather Sensors are programmable by station to prevent or pause watering; up to 4 with LX-IVM. • Station Run Time: 0 min. to 96 hrs. • Seasonal Adjust: 0% to 300% (96 hrs. maximum station run time), • 10 independent programs on the ESP-LXI IVM • 8 start times per program,• Program Day Cycles include Custom days of the week, Odd, Odd no 31st, Even, and Cyclical dates,•

Supply,Fixing & Commissioning of IVM-SOL Interfaces (solenoid and decoder in one unit as interface with facility of Maximum Two Wire Connector Between the Solenoid valve & Communication Cable) with LX-IVM to control station valves and master valves as per specifications complete

Supply,Fixing & Commissioning of IVM-OUT Interfaces with LX-IVM to manage 3rd party valves and external gear such as pump stations as per specifications complete

Supply,Fixing & Commissioning of IVM-SD for surge protection on the 2-Wire path as required with copper grounding rod, clamps, charcoal and all requisite accessories as per specifications complete

Supply,Fixing & commissioning of 1.5" Solenoid globe angle inlet Valves with provision to DC Latched interface module, fabric reinforced Nitrile diaphragm Material and rugged PVC construction ,compatible and slow closing to prevent water hammer,pressure rating upto 10.4 KSC and maximum flow of 100 GPM ,max water temp. upto 42 degree centigrade, 9V DC solenoid ( IVM-SOL Interfaces) Without AC Coil ,current rating 0.41A @50Hz,coil resistance 30 ohm with provision to attach PRS-Dial PGA Pressure Regulation Optional PRS-D

Supply,Fixing & commissioning of 2" Solenoid globe angle inlet Valves with provision to DC Latched interface module, fabric reinforced Nitrile diaphragm Material and rugged PVC durable glass -filled nylon construction ,compatible with and slow closing to prevent water hammer,pressure rating upto 10.4 KSC and maximum flow of 150 GPM ,max water temp. upto 42 degree centigrade, 9V DC solenoid ( IVM-SOL Interfaces ) , Without AC Coil current rating 0.41A @50Hz,coil resistance 30 ohm with provision to attach PRS-Dial PGA Pressure Regulation Optional PRS-D

Supply,Fixing & commissioning of 3" Solenoid globe Valves as central shut off valve with provision to DC Latched interface module, fabric reinforced diaphragm and rugged PVC construction ,compatible and slow closing to prevent water hammer,pressure rating upto 0,7 to 10 KSC and maximum flow of 10 to 100 m3/h ,max water temp. upto 60°C with 9V DC solenoid ( IVM-SOL Interfaces/ IVM-OUT Interfaces with LX-IVM to manage 3rd party valves ),current rating 0.41A @50Hz,coil resistance 30 ohm.

Supply,Fixing & commissioning of PRS-DIAL to Maintain constant outlet pressure between 1.04 to6.9 KSC etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge.

Supply,Fixing & commissioning of direct bury -on wire connector with strain relief ,UL486 D certified ,with waterproof silicone sealant ,fits wire from 22ga to6 ga as per specifications etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. DBRY

Supply,Fixing & commissioning of automatic rain shut off device ,latching hinge with multiple rainfall settings 5mm to 20mm UL CUL listed and CE approved etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. RSD BEX

Supply,Fixing & commissioning of Pump relay 24 AC PLA relay and accessories etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge

Submission of Shop drawing, As built drawing, Handing over documents, Training for maintenance team after commissioning of the system and including Supervision, Transportation charges

Plumbing Works (Toilet Building (2 Nos) Plumbing Works)

INTERNAL SANITARY FIXTURES & CP FITTINGS:

European Water Closet with "P" or "S" Trap with Double Flapped Seat and Seat Cover with Brass Hinges and 12.5 litre capacity Porcelain Low Level Flushing Tank with all internal fittings white Colour

PVC low level flushing tank with all internal fittings (wall mounting type) 10 ltr capacity

Stainless Steel Health Faucet

CP Two Way Bib Cock with Health Faucet

Lipped Mouth Porcelain Flat Back Urinal with all accessories such as 32mm dia Bellmouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple etc.

Providing, Fixing, testing and commissioning of Push cock with wall flange (as required) and making good as required. (For Urinal )

CP Angle Cock Tap

Supply, installation, testing and commissioning of approved make of Auto closing Concealed Urinal Flush Valve With Wall Flange having concealed body with exposed shut off provision and round flange with all necessary accessories complete as required. It shall be installed and commissioned as recommended by the manufacturer and the Consultants.

Supply, installation, testing and commissioning of approved make of Sensor Mini Concealed Type Flushing Valve for Urinal Complete with Installation Box (Battery Operated) with all necessary accessories complete as required. It shall be installed and commissioned as recommended by the manufacturer and the Consultants

Supply and laying with best quality the following materials of Machine Polished granite slab for wash basin counter top of 18 mm thick (Jet Black) including cutting for wash basin and edge polishing to be set in CM 1:4 (1 of cement : 4 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportation charges, loading, unloading, preparation of surface, necessary hacking on RCC surface, cutting to required shape, edging, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Fixing, testing and commissioning of C.P. brass angle valve with C.P. wall flange, Nut and Washer etc. complete as required. CP Angle Cock Tap

Providing, Fixing, testing and commissioning of C.P Copper connection 375 mm long including nuts and washers and making connection to fixtures and fittings complete as required. CP Angle Cock Tap

Fixing 2 Nos. support arms and backrest mounted on the track (vertically and laterally) for handicap toilet complete as required.

Providing and fixing pre-polished Stainless steel railing for 1050 mm height using 50mm dia bent to shape as shown in drawing and 32mm dia for vertical and 25mm dia three bracing bar as per drawing. Rate shall be inclusive of fixing the railing into the concrete surface with necessary hardware's, SS caps, grouting for the same etc. including final polishing, buffing at site complete.(for staircase,balcony,open to sky) and as per drawing SS shall conforming of grade AISI 306. Rate including all materials, labour charges, wastages, necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, straightening, cutting, fabricating, welding, bending to shape bolting, installation charges, fuel, consumables, tools and tackles as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Supply, installation, testing and commissioning of approved make of Bottle Trap for wash basin with Long Wall Connection Pipes below the wash basin with all necessary accessories complete as required It shall be installed and commissioned as recommended by the manufacturer and the Consultants.

Supply, installation, testing and commissioning of approved make of P Trap for wash basin drain with suitable PVC connection and with necessary accessories as required. It shall be installed and commissioned as recommended by the manufacturer and the Consultants.

Supply, installation, testing and commissioning of approved CP Basin Pillar Tap for wash basins, Self closing type with cold provision only and and with all accessories complete as required.

Supply, installation, testing and commissioning of approved make wall mounted CP Sink Tap for SS Kitchen Sink with all accessories complete as required. SS Heavy Duty Long Body Tap 15mm

Supply, installation, testing and commissioning of approved CP Bib Cock with C.P.flanges, with all accessories complete as required.

Supply, installation, testing and commissioning of approved make CP Toilet Roll Holder complete with all necessary accessories as required

Supply, installation, testing and commissioning of approved CP Soap Dispenser complete with all necessary accessories as required.

WATER SUPPLY

Supply, Installation, testing and commissioning of approved make CPVC SDR 11 confirming IS 15778 with all CPVC fittings and specials such as tees, elbows, couplers etc with uPVC brass threaded combination/ transition specials such as male adopters brass threaded, female adopters brass threaded, FABT tee, FABT elbow conforming to ASTM - D 2846,up to 50 mm dia etc where connection with metal is to be made including cutting holes and chases in walls and Joints to be made with uPVC solvent as per ASTM F 493, with suitable clamps , hanger bolts complete with all accessories complete as required. (For Internal Concealed Lines) Make: Astral / Finolex / Supreme

Supply, Installation, testing and commissioning of approved make CPVC SDR 11 confirming IS 15778 with all CPVC fittings and specials such as tees, elbows, couplers etc with uPVC brass threaded combination/ transition specials such as male adopters brass threaded, female adopters brass threaded, FABT tee, FABT elbow conforming to ASTM - D 2846,up to 50 mm dia etc where connection with metal is to be made including cutting holes and chases in walls and Joints to be made with uPVC solvent as per ASTM F 493, with suitable clamps , hanger bolts complete with all accessories complete as required. (For Internal Concealed Lines) Make: Astral / Finolex / Supreme

Supply, Installation, testing and commissioning of uPVC Sch 80 pasted type with all fittings conforming to ASTM D 1785 & 2466 /2467 and specials such as tees, elbows, couplers etc with brass threaded combination/transition specials such as male adopters brass threaded, female adopters brass threaded, brass FABT tee, brass FABT elbow etc where connection with metal is to be made including Joints to be made with solvent as per standard, suitable , brackets clamping, anchor bolts complete and with all accessories complete and all installations requirements such as rope ladder/ scaffolding/ staging as required. (Pump Rising Main/ Booster Pump Lines/ Pump Headers) Make: Astral / Finolex / Supreme

Providing, fixing, testing and commissioning at site in positions as detailed in drawings, forged brass BALL VALVES [RB PN-10] complete in all respects, and with all accessories complete as required. Make: Cimberio / Zoloto

20 mm dia

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

Supply, Installation, testing and commissioning of below dia CI/SGI Butterfly Valve (PN-16) of approved make with SS disc including necessary sockets / unions, nut, testing etc. complete and with all accessories as required. (Prior approval of sample and brand by the Consultants / Engineer in Charge is necessary before use)

50 mm dia

Supply, Installation, testing and commissioning of below dia Forged brass NON RETURN VALVE, tested to a pressure of 10 Kg/cm2 including flanges / union, nuts, bolts, washer etc., complete and with all accessories as required.

40 mm dia

50 mm dia

Supply, Installation, testing and commissioning of following dia Float Valve / Ball cock of approved make including necessary sockets / unions, nut, testing etc. complete and with all accessories as required. (Prior approval of sample and brand by the Consultants / Engineer in Charge is necessary before use)

Supplying, installing, testing and commissioning approved make forged brass Y STRAINER, tested to a pressure of 10 Kg/cm2 including flanges / union, nuts, bolts, washer etc., complete with all accessories as required. (Prior approval of sample and brand by the Consultants / Engineer in Charge is necessary before use)

32 mm dia

Supply, unloading, conveyance, installation, testing and commissioning of approved make PVC tanks of following capacities complete with all necessary accessories as required and giving connections as required and as approved by the Consultant/engineer in charge. (at Upper Terrace Level) 5,000 L - Make: sintex

Effecting connection from Municipal Water Supply line including necessary excavation & making good the same including cutting, boring and tapping the Existing line by providing and installing ferrule / Tee connections with necessary fittings as required and making good the same. The rate for this item also includes complete services from the contractor for liasoning works such as filing necessary applications, submission of forms for approval to the municipal authorities, depositing the fees / other amounts as required for getting the premises / installations, inspected and approved and all other formalities required till the water connection is obtained. All the expenses incurred in this regard shall be borne by the Contractor except for the official payments to be made for any security deposit etc. which will be reimbursed on production of original voucher.

Constructing brick masonry water metre chamber of brick work with bricks of class 75 in cement mortar 1:5 (1 cement:5 fine sand) plastering internal face with cement 1:3 (1 cement mortar: 3 fine sand) and a rough plaster on outer face with a floating coat of neat cement. R.C.C. top slab with manhole cover & frame. Including excavation, dewatering, refilling, watering, ramming & removing the surplus excavated material complete as required. (All sizes are clear internal sizes). Size 1200 x 900 x 1000 mm deep

BUILDING INTERNAL DRAINAGE & RAIN WATER

Supply, unloading, conveyance, installation, testing and commissioning of approved make Type - B SWR PVC pipe conforming to IS 13592 & fittings confirming to IS 14735, soil & waste pipes jointed with solvent cement of good quality lubricant inclusive of all necessary specials like bends, tees, offsets, junctions, pan connector etc., laid under floor / under ceiling / on walls with suitable clamps , hanger bolts complete and with all accessories as required.

40 mm OD (Class 3 -6Kg/cm2)

50 mm OD (Class 3 -6Kg/cm2)

75 mm OD (Type B)

110 mm OD (Type B)

Supply, unloading, conveyance, installation, testing and commissioning of approved make UPVC Multi Floor trap 75mm dia outlet with necessary accessories like adapter clamps/brackets etc complete and with all accessories as required.

Providing and fixing in position 110 mm ID. uPVC P-trap with 50mm water seal conforming to IS:14735-90. Nahni traps of self cleaning design joining, embedding in concrete etc. complete with required saddle for connection of washbasin & Shower. Rate to include making of opening in floor, marble / tiles, for fixing grating.

Supply, unloading, conveyance, installation, testing and commissioning of approved make PVC Multi Floor trap 75mm (closed at top) dia outlet with necessary accessories like adapter clamps/ brackets etc complete and with all accessories as required.

Providing and fixing of PVC Vent cowl for soil & waste water line.

75mm dia

110mm dia

Providing and fixing Heavy class SS grating with Cockroach proof SS strainer of approved design including setting in floor with cement mortar to match with floor finish as per architect requirement & suitable for waste and FD.(Toilet -Floor Trap)

Size 100 mm x 100 mm or 100 mm dia

Size 150mm x 150mm or 125mm dia

Supply, unloading, conveyance, installation, testing and commissioning of approved make 150 x 150mm square Stainless Steel CLOSED GRATING COVER with protection from cockroaches of matching size of multi inlet of "P" trap complete in all respects, and with all accessories complete as required.

Supply, unloading, conveyance, installation, testing and commissioning of approved make of Stainless steel rainwater Jali complete in all respects, and with all accessories complete as required.

Supply, unloading, conveyance, installation, testing and commissioning of approved make SWR type - A pipes conforming to IS 13592 & fittings confirming to IS 14735 with solvent of approved make with necessary specials like bend, shoe, grating,clamps, screws etc., including jointing the pipes and specials with solvent cement and cutting the pipes required lengths Rate quoted should include for moulded bends, enlarger & leaf trap complete at each outlet. MS supports like hanger supports, grip bolts,brackets and clamps etc., complete at all heights and depths and with all accessories complete and all installation requirements such as rope ladder/ scaffolding/ staging as required. (Rain water Shaft works/ Waste vent pipes )

EXTERNAL WATER SUPPLY & SEWERAGE

Providing, laying, jointing and testing in position the following Double Wall Corrugated HDPE Pipes conforming to EN-13476-3 for drainage cut to required lengths making proper connections of required depths. Pipe to be laid below ground level in trenches upto required depth and making good the same complete as required. Cost shall be inclusive of providing protection to pipe all round / haunches as per specification. (For below ground level) 110 mm dia (External Sewage pipe from toilet)

Supply, Installation, testing and commissioning of below dia CI/SGI Butterfly Valve (PN-16) of approved make with SS disc including necessary sockets / unions, nut, testing etc. complete and with all accessories as required. (Prior approval of sample and brand by the Consultants / Engineer in Charge is necessary before use)

50 mm dia

Supply, Installation, testing and commissioning of below dia CI/SGI Butterfly Valve (PN-16) of approved make with SS disc including necessary sockets / unions, nut, testing etc. complete and with all accessories as required. (Prior approval of sample and brand by the Consultants / Engineer in Charge is necessary before use)

20mm dia NB

25mm dia NB

Supplying and laying of pipes and conveying to position; cleaning, laying and jointing to true lines and gradients, RCC NP2 PIPE of IS:4985 [10 Kg/cm2] including jointing the pipe as per specification, testing the pipe line after installation all per provisions of IS:1742-1983. [Code of practice for building drainage], and with all accessories complete as required.

300mm dia

Constructing GULLY TRAP CHAMBER 300 x 300mm internal size including 100mm thick 1:4:8 PCC base, 115mm thick brick masonry in CM 1:5, plastering internally and externally with CM 1:3 and providing 110mm dia PVC trap, and with all accessories complete as required

Constructing brick INSPECTION CHAMBERS with bricks of class 75 in cement mortar 1:5 including plastering inside [smooth] and outside [rough] with cement mortar 1:3, 12mm thick [a cement : 3 coarse sand] inside with a floating coat of neat cement 12mm thick, fixing C.I.frame and cover with 1:2:4 cement concrete, foundation concrete 150mm thick 1:4:8 P.C.C providing M.S. / C.I. steps for chambers deeper than 800mm, and with all accessories complete as required.

Internal size 600 x 600mm depth not exceeding 900mm, including providing and fixing approved FRP cover and frame.

Manhole cover 600x600mm

Constructing brick CATCH BASIN with bricks of class 75 in cement mortar 1:5 including plastering inside [smooth] and outside [rough] with cement mortar 1:3, 12mm thick [a cement : 3 coarse sand] inside with a floating coat of neat cement 12mm thick, fixing C.I.frame and FRP cover with 1:2:4 cement concrete, foundation concrete 150mm thick 1:4:8 P.C.C providing M.S. / C.I. steps for chambers deeper than 800mm, and with all accessories complete as required.

Internal size 600 x 600mm depth not exceeding 600mm, including providing and fixing approved FRP cover and frame.

Manhole cover 600x600mm

Providing connections as required from septic tank overflow to soak pits in series, including supply, excavation, laying, conveying to position, cleaning and jointing of true lines and gradients for RCC NP2 PIPE of IS:4985 [10 Kg/cm2] including jointing the pipe as per specification, testing the pipe line after installation all per provisions of IS:1742-1983, and with all accessories complete as required. 300mm dia

Providing connections as required from building waste water drain / storm water drain / soak pit overflow to the public drain including supply, excavation, laying, conveying to position, cleaning and jointing to the as per requirement of the existing pipes/ trench, manhole including all accessories complete as required.

Stormwater - external drain

Wastewater - external drain

Sewer/ Soak pit overflow - external drain.

PUMPS / CONTROLLERS / MISCELLANEOUS EQUIPMENT

Unloading, conveyance, installation, testing and commissioning of approved make complete composite Pumping system consisting of Submersible / Vertical Inline pump having stainless steel SS304 stage casing and SS 304 impellers with stainless steel SS-304 shaft as per IEC standards and GJL 250 cast iron suction & discharge casing with single mechanical seal and pressurised tank of suitable capacity as per manufacturer calculation, complete with all standard accessories including pressure switch, pressure gauges, non-return & isolating valves on suction and delivery side with nuts, bolts & washer 400/440 volt 50 cycle AC supply, suitable for following duty complete with Control Unit Panel, manifolds & chassis, including the installation of water level controller as per the approval of Project-in-charge complete as per requirement. (The Incoming cable to Pump panel from main panels will be under electrical scope).

For Domestic Water Flow Rate : 5.0 cum/hr per pump Head : 30 mtrs 1 Set = 1 Working + 1 Standby Make: Grundfos / KSB / CRI / Kirloskar

For Rain water Dewatering Flow Rate : 5.0 cum/hr per pump Head : 12 mtrs 1 Set = 1 Working + 1 Standby Make: Grundfos / KSB / CRI / Kirloskar

Supply, installation, testing and commissioning of approved Single phase pump Water Level Controller suitable to control the above mentioned pumps with accessories as complete in all respects. It shall be installed and commissioned as recommended by the manufacturer and the Consultants. (Cabling will be done by the Electrical team for longer distances.)

Supply, installation, testing and commissioning of approved Three phase pump Water Level Controller suitable to control the above mentioned pumps with accessories as complete in all respects. It shall be installed and commissioned as recommended by the manufacturer and the Consultants. (Cabling will be done by the Electrical team for longer distances.)

WATER SUPPLY

Supply, Installation, testing and commissioning of approved make CPVC SDR 11 confirming IS 15778 with all CPVC fittings and specials such as tees, elbows, couplers etc with uPVC brass threaded combination/ transition specials such as male adopters brass threaded, female adopters brass threaded, FABT tee, FABT elbow conforming to ASTM - D 2846,up to 50 mm dia etc where connection with metal is to be made including cutting holes and chases in walls and Joints to be made with uPVC solvent as per ASTM F 493, with suitable clamps , hanger bolts complete with all accessories complete as required. (For Internal Concealed Lines) Make: Astral / Finolex / Supreme

Providing, fixing, testing and commissioning at site in positions as detailed in drawings, forged brass BALL VALVES [RB PN-10] complete in all respects, and with all accessories complete as required. Make: Cimberio / Zoloto

20 mm dia

25 mm dia

50 mm dia

EXTERNAL DRAINAGE & STORMWATER

Supply, unloading, conveyance, installation, testing and commissioning of approved make Type - B SWR PVC pipe conforming to IS 13592 & fittings confirming to IS 14735, soil & waste pipes jointed with solvent cement of good quality lubricant inclusive of all necessary specials like bends, tees, offsets, junctions, pan connector etc., laid under floor / under ceiling / on walls with suitable clamps , hanger bolts complete and with all accessories as required.

50 mm OD (Class 3 -6Kg/cm2)

75 mm OD (Type B)

110 mm OD (Type B)

Supply, unloading, conveyance, installation, testing and commissioning of approved make UPVC Multi Floor trap 75mm dia outlet with necessary accessories like adapter clamps/brackets etc complete and with all accessories as required.

Providing and fixing in position 110 mm ID. uPVC P-trap with 50mm water seal conforming to IS:14735-90. Nahni traps of self cleaning design joining, embedding in concrete etc. complete with required saddle for connection of washbasin. Rate to include making of opening in floor, marble / tiles, for fixing grating.

Supply, unloading, conveyance, installation, testing and commissioning of approved make PVC Multi Floor trap 75mm (closed at top) dia outlet with necessary accessories like adapter clamps/ brackets etc complete and with all accessories as required.

Providing and fixing of PVC Vent cowl for soil & waste water line.

75mm dia

110mm dia

Providing and fixing Heavy class SS grating with Cockroach proof SS strainer of approved design including setting in floor with cement mortar to match with floor finish as per architect requirement & suitable for waste and FD.(external flooring -Floor Trap)

Size 100 mm x 100 mm or 100 mm dia

Size 150mm x 150mm or 125mm dia

Supply, unloading, conveyance, installation, testing and commissioning of approved make 150 x 150mm square Stainless Steel CLOSED GRATING COVER with protection from cockroaches of matching size of multi inlet of "P" trap complete in all respects, and with all accessories complete as required.

Supply, unloading, conveyance, installation, testing and commissioning of approved make of Stainless steel rainwater Jali complete in all respects, and with all accessories complete as required.

Supply, unloading, conveyance, installation, testing and commissioning of approved make SWR type - A pipes conforming to IS 13592 & fittings confirming to IS 14735 with solvent of approved make with necessary specials like bend, shoe, grating,clamps, screws etc., including jointing the pipes and specials with solvent cement and cutting the pipes required lengths Rate quoted should include for moulded bends, enlarger & leaf trap complete at each outlet. MS supports like hanger supports, grip bolts,brackets and clamps etc., complete at all heights and depths and with all accessories complete and all installation requirements such as rope ladder/ scaffolding/ staging as required. (Rain water Shaft works/ Waste vent pipes )

Providing, laying, jointing and testing in position the following Double Wall Corrugated HDPE Pipes conforming to EN-13476-3 for drainage cut to required lengths making proper connections of required depths. Pipe to be laid below ground level in trenches upto required depth and making good the same complete as required. Cost shall be inclusive of providing protection to pipe all round / haunches as per specification. (For below ground level) 110 mm dia (External surface)

Providing, fixing, testing and commissioning at site in positions as detailed in drawings, forged brass BALL VALVES [RB PN-10] complete in all respects, and with all accessories complete as required.

20mm dia NB

25mm dia NB

32mm dia NB

Supply, Installation, testing and commissioning of below dia CI/SGI Butterfly Valve (PN-16) of approved make with SS disc including necessary sockets / unions, nut, testing etc. complete and with all accessories as required. (Prior approval of sample and brand by the Consultants / Engineer in Charge is necessary before use) 50 mm dia

Supplying and laying of pipes and conveying to position; cleaning, laying and jointing to true lines and gradients, RCC NP2 PIPE of IS:4985 [10 Kg/cm2] including jointing the pipe as per specification, testing the pipe line after installation all per provisions of IS:1742-1983. [Code of practice for building drainage], and with all accessories complete as required. 300mm dia

Constructing GULLY TRAP CHAMBER 300 x 300mm internal size including 100mm thick 1:4:8 PCC base, 115mm thick brick masonry in CM 1:5, plastering internally and externally with CM 1:3 and providing 110mm dia PVC trap, and with all accessories complete as required.

Constructing brick INSPECTION CHAMBERS with bricks of class 75 in cement mortar 1:5 including plastering inside [smooth] and outside [rough] with cement mortar 1:3, 12mm thick [a cement : 3 coarse sand] inside with a floating coat of neat cement 12mm thick, fixing C.I.frame and cover with 1:2:4 cement concrete, foundation concrete 150mm thick 1:4:8 P.C.C providing M.S. / C.I. steps for chambers deeper than 800mm, and with all accessories complete as required.

Internal size 600 x 600mm depth not exceeding 900mm, including providing and fixing approved FRP cover and frame.

Manhole cover 600x600mm

Constructing brick CATCH BASIN with bricks of class 75 in cement mortar 1:5 including plastering inside [smooth] and outside [rough] with cement mortar 1:3, 12mm thick [a cement : 3 coarse sand] inside with a floating coat of neat cement 12mm thick, fixing C.I.frame and FRP cover with 1:2:4 cement concrete, foundation concrete 150mm thick 1:4:8 P.C.C providing M.S. / C.I. steps for chambers deeper than 800mm, and with all accessories complete as required.

Internal size 600 x 600mm depth not exceeding 600mm, including providing and fixing approved FRP cover and frame.

Manhole cover 600x600mm

PUMPS / CONTROLLERS / MISCELLANEOUS EQUIPMENTS

Unloading, conveyance, installation, testing and commissioning of approved make complete composite Pumping system consisting of Submersible / Vertical Inline pump having stainless steel SS304 stage casing and SS 304 impellers with stainless steel SS-304 shaft as per IEC standards and GJL 250 cast iron suction & discharge casing with single mechanical seal and pressurised tank of suitable capacity as per manufacturer calculation, complete with all standard accessories including pressure switch, pressure gauges, non-return & isolating valves on suction and delivery side with nuts, bolts & washer 400/440 volt 50 cycle AC supply, suitable for following duty complete with Control Unit Panel, manifolds & chassis, including the installation of water level controller as per the approval of Project-in-charge complete as per requirement. (The Incoming cable to Pump panel from main panels will be under electrical scope).

For Rain water Dewatering Flow Rate : 5.0 cum/hr per pump Head : 12 mtrs 1 Set = 1 Working + 1 Standby Make: Grundfos / KSB / CRI / Kirloskar

Supply, installation, testing and commissioning of approved make of Three phase pump Water Level Controller suitable to control the above mentioned pumps with accessories as complete in all respects. It shall be installed and commissioned as recommended by the manufacturer and the Consultants. (Cabling will be done by the Electrical team for longer distances.)

RO SYSTEM

Providing, Fixing, testing and commissioning of 250 LPH RO plant with pre fileter's of Dual media filters for detail Specification of following equipments High pressure pumps, Chlorine dosing, Antiscalant and PH correction and SMBS cleaning system storage tank with pumps. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. System should be equipped with dry running protection. Final water outlet parameters completed in all respects has to meet (As per IS 10500 all parameter's). Set of accessories such as pressure switches, pressure transducers, inter connecting power and control cabling etc. complete with all accessories. Including Valves, stainer, and pressure gauges & making good the walls & floors wherever required as per Site engineer/Architect/consulting engineer. (Rate as per vendor quote)

The unit shall be complete with temperature safety control, lamp out alert circuit & UV radiometer with 4 – 20 mA output.The treatment chamber shall be SS3162 (Rate as per vendor quote). Flow Rate : 250 LPH

R.Krishnamurthy & Co