Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹80.3 LAccepted-AOC 64 A JASRAJ MANSION 1ST FLOOR OLD HANUMAN LANE KALBADEVI ROAD MUMBAI 400 002 | MUMBAI | MAHARASHTRA | 400002 | L1 | Accepted-AOC lowest | |
| 2 | L2₹84.1 L+₹3.0 L (3.66%)Rejected-Finance SHOP NO 4 SUN STAR CHS LTD PLOT NO 309 SECTOR 21 NERUL EAST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹85.7 L+₹4.5 L (5.51%)Rejected-Finance C 111 STATION PLAZA STATION ROAD STATION ROAD BHANDUP W MUMBAI 400078 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400078 | L3 | Rejected-Finance Being not lowest | |
| 4 | L4₹91.2 L+₹10.0 L (12.4%)Rejected-Finance | L4 | Rejected-Finance Being not lowest |
Tender Value
Refer Docs
EMD Value
₹1.5 L
Closing Date
1 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COL VIKAS KESARWANI
CWE AF LOHEGAON
UPGRADATION OF ENTRANCE GATE AT MGR AND SGR AT SITE P AND SITE R AT AF STN THANE
2022_MES_548547_1
82627/E8
Open Tender
Civil Works
Item Rate
270 days
GE AF THANE
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE (AF) THANE
₹1.5 L
Yes
13 Oct 2022
29 Aug 2022
8 Oct 2022
29 Aug 2022
1 Oct 2022
19 Sept 2022
Amount
Grubbing up tree trunk exc 100 cm and n exc 150 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site complete all as specified and directed by Engr-in- Charge.
Demolition of brick work or stone/ boulder masnory built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast articles complete all as specified and directed by Engr-in- Charge.
Demolition of cement concrete ( un reinforced ) of any description and in any position (below or above ground level) complete all as specified and as directed by Engr-in- Charge.
Demolition of Reinforced cement concrete of roofs, floors ( other than ground floors), beams , staricases landing, chajjas and similar suspended work complete all as specified and as directed by Engr-in- Charge.
Dismantling wrought iron or mild steel work of any description complete all as specified and directed by Engineer in charge.
Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc 1.5 and n.exc 4 Sqm each complete all as specified and directed by Engr-in- Charge.
Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc 1.5 Sqm each complete all as specified and directed by Engr-in- Charge.
Taking up or down 15mm dia GI steel water tubing and connections, including cleaning and refixing the in new or old positions complete all as specified and directed by Engr -in- Charge.
Taking up or down 20 mm dia GI steel water tubing and connections, including cleaning and refixing the in new or old positions complete all as specified and directed by Engr -in- Charge.
Dismantling plain or corrugated steel sheeting , AC sheet ( corrugated , semi corrugated etc) any gauge, thickness sheets including Nainital or similar pattern roof coverings in any position complete all as specified and directed by Engineer in Charge.
Dismantling water tank and removing Exc 500 & n Exc 1000 ltr water tank complete all as specified and directed by Engineer in charge.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundations, etc, or for shafts, wells, manholes etc and getting out in hard dense soil complete all as specified and as directed by Engr-in- Charge.
Excavation in trenches exc 1.5m wide and n.exc 3m in depth for foundations, etc, or for shafts, wells, manholes etc and getting out in hard dense soil complete all as specified and as directed by Engr-in- Charge.
Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm with soil obtained from excavation complete all as specified and as directed by Engr-in- Charge.
Removing excavated excavated soil/ material exceeding 50mtr but not.exc 250 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed by Engr-in- Charge.
M & L for MS TMT bars 10mm dia and over as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed by Engineer in charge.
M & L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally or hooping as in reinforcement , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90mm dia complete all as specified and directed by Engr-in-Charge.
M&L for RCC M- 30 ( Design Mix) using 20mm graded aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns etc basement slab under rammed pillars and mass concrete etc complete all as specified and directed by Engr-in-Charge.
M&L for RCC M- 30 ( Design Mix) using 20mm graded aggregate as in columns, pillars, piers,posts and struts complete all as specified and directed by Engr-in-Charge.
M&L for RCC M- 30 ( Design Mix) using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span and mass concrete etc complete all as specified and directed by Engr-in-Charge.
M&L for RCC M- 30 ( Design Mix) using 20mm graded aggregate as in slabs supported on walls , beams and columns in floors, roofs, landings, balconies, canopies, deck slabs ind in shelves and mass concrete etc complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete 1:4:8, type D2, using (40mm aggregate) in foundations, plinth beams filling and mass concrete complete all as specified and directed by Engineer in charge.
M&L for providing PCC (1:3:6) type C2 using 40 mm graded aggregate as Path/Plinth protection finished the surface even & smooth with out using extra cement complete all as specified and directed by Engineer in charge.
M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in levelling course to finished even and smooth with using extra cement complete all as specified and directed by Engr-in- Charge.
M&L for form work to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits ( if any) of foundation and plinth beam and similar work vertical or to batter on rough finish surface complete all as specified and directed by Engr-in-Charge.
M&L for form work to sides of pillars, posts, sturts, piers, columns and sanchions etc on rough finished surface complete all as specified and directed by Engr-in-Charge.
M&L for form work to sides and soffits of floor or roof beams , beam haunchings including supports overhang etc also splays between floors and beams etc on rough finish surface complete all as specified and directed by Engr-in-Charge.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified and directed by Engr-in-Charge.
M&L for precast cement concrete block masnory with soild blocks, exc 10 cm in width with PCC type C1, 1:3:6 ( using 20mm graded stone aggregate) and set in CM (1:6) complete all as specified and directed by Engr - in- Charge.
M&L for 15 mm thick rendering in CM 1:4 on brick or concrete surface finisged even and smooth complete all as specified and directed by Engr-in- Charge.
M & L for 10mm thick rendering in CM 1:6 on fair faces of brick or concrete surfacesfinisged even and smooth without using extra cement complete all as specified and directed by Engr-in- Charge.
M&L for 5 mm thick rendering in ceiling in CM 1:3 on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in- Charge.
M&L for applying two coats of oil bound distemper over a coat of primer,over 1mm thick wall care putty on walls including preparation of new or previously untreated surfaces complete all specified and directed by Engr-in- Charge.
M&L for applying three coats of white wash including preparation of newly plastered ceiling surfaces complete all as specified and directed by Engr-in- Charge.
Material & labour for applying two coat of premium exterior acrylic emulsion paint , Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silcon additives @ 1.67 litre / 10 Sqm over and including priming coat of exterior primer over new surface complete all as specified and directed by Engr-in- CHarge.
M&L for Machine cut kota stone slab in flooring 20 to 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including screed bed 15mm thick in CM (1:4) complete all as specified and directed by Engr-in-Charge.
M&L for Machine cut kota stone slab 20 to 25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed over 10mm thick 1:4 cement mortar rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.
Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed by Engr-in-Charge.
Cutting holes in brick walls exc half bricks but not exc one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cm (1:3) or cement concrete (1:2:4) type B1 as required complete all as specified and directed by Engr-in-Charge.
M&L for Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.
S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer in charge.
S & F 40 mm thick flush shutter water proof BWR grade solid core construction with block board core and ply wood face panel commercial type both sides complete all as specified and as directed by Engr -in - Charge.
S&F 300 mm long aluminium anodised sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engineer in charge.
S&F 150 mm long aluminum anodised barrel tower bolts of extruded section of size complete all as specified and directed by Engineer in charge.
S&F aluminium anodised handles 150 mm long of extruded section for door fixed with stainless steel screws including taking down old handles complete all as specified and as directed by Engineer in charge.
S&F for floor door stopper 150mm length of brass body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed by Engr-in- Charge.
S&F mild steel 100 mm long butt hinges, medium weight cold rolled complete all as specified and directed by Engineer in charge.
S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, straight, mitred and wherever required including cleat angle, aluminium snap beading for glazing/ paneling, stainless steel screws complete all as specified and directed by Engineer in charge.
S & F Sheet Glass, Ordinary quality 5.5mm thick including glazing beadings/ rubber beading not exc 0.5 Sq.m in each pane complete all as specified and directed by Engr-in- Charge.
S&F stainless wire cloth of 0.36 mm nominal dia of wire & and average width of aperture 1.40 mm fixed with stainless steel wire complete all as specified and directed by Engineer in charge.
M&L for 20mm thick Granite (of any colour) tiles machine cut in skirting/dado set and including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over 20 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed by Engr-in- Charge.
S&F Door closer aluminium ( extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of pink primer etc complete all as specified and as directed by Engineer-in-Charge
M&L ploythene film, 300 micron thick laid on a coat of bitumen primer, @ 0.30 to 0.50 per Sqm complete all as specified and as directed by Engineer-in-Charge
M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded crushed stone aggregate as in sub base in flooring and paving complete all as specified and directed by Engr-in- Charge.
M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded crushed stone aggregate as in sub base in flooring and paving complete all as specified and directed by Engr-in- Charge.
M&L for Terrazzo tiles 25cm x 25cm x 22 mm thick, with size of chips upto 12mm, set jointed and pointed in neat cement slurry and cut and polished in floors with grey cement and no pigment complete all as specified and directed by Engr-in- Charge.
S&F fancy type LED light letters or figures of size 30 cm high (AIR FORCE STATION THANE, THANE, THANKS AND AIR FORCE LOGO) (Block, Roman,Italic or Indian) of colour and shape complete all as specified and as directed by Engineer-in-Charge
S&F fancy type LED light figures including logo of size 90cm high (AIR FORCE LOGO)of any colour and shape complete all as specified and as directed by Engineer-in-Charge
M&L for rendering 20mm thick in two layers on external surfaces first layer 15mm thick in CM 1:6 on fair faces of brick/PCC block or concrete surfaces and second layer ( setting coat / finishing) 5mm thick in CM 1:4 with sponge finish including racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete all as specified and directed by Engr-in- Charge.
M&L for providing and fixing MS Fe 410-W (cde-E-250) quality-A as in Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc complete all as specified and directed by Engr-in-Chrage
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed other end, or screewed both ends each screwed end to be fitted with washer and one hexagonal or square nut exc 15 cm and n.exc 22.5 cm length complete all as specified and directed by Engr-in-charge.
M& L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n exc 400 sqm, depth n exc 50 mm complete all as specified and directed by Engr-in-charge.
Excavation in over areas, n exc 1.5 m deep and getting out in hard & dense soil complete all as specified & directed by Engr-in-charge.
M&L for Polythene film, 400 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m complete all as specified & directed by Engr-in-charge.
M&L for PCC 100mm thick,Cement concrete type D-2,1:4:8 ( using 40mm stone aggregate) in sub base complete complete all as specified and directed by Engineer in charge.
M&L for M- 20 grade nominal mix cement concrete 1:1:5:4, type B1 using 20mm graded coarse aggregate as mass concrete complete all as specified and directed by Engineer in charge.
M&L for MS work flat iron,MS plates as Fe-410- W(Gde- E-250) quality-A in brackets,cleats.fasteners,wind ties,supports.base for posts etc with rivetd.bolted or welded attachment complete all as specified & directed by Engr-in-charge.
S&F Steel work as in tubular(round/square/rectangular shape of pipe) trusses of semi circle shape up to height 6 mtrs including post special shaped washers etc complete incl necessary nut bolts wind tiles and gusset plates etc using ERW or induction butt welded tubes conforming to IS 1161-1998 grade yst -240 medium grade complete all as specified & directed by Engr-in-charge.
S&F for MS support cone with bearing for Mero space frame truss Fe-410- W(Gde- E-250) quality-A or otherwise complete all as specified & directed by Engr-in-charge.
S&F for MS round pipe as reducer for Mero space frame truss Fe-410- W(Gde- E-250) quality-A or otherwise all as specified and directed by Engr-in-charge
S&F for MS Mero Spherical nodes (75 mm dia) for Mero space frame truss Fe-410- W(Gde- E-250) quality-A or otherwise complete all as specified and directed by Engr-in-charge
S&F for MS Mero Spherical nodes (60 mm dia) for Mero space frame truss Fe-410- W(Gde- E-250) quality-A or otherwise complete all as specified and directed by Engr-in-charge
M&L for Preparation of new steel surface of any description over 10 Cm in width or girth, not otherwise described applying one coats of synthetic enamel paints over a coat of red oxide zinc primer including necessary steel double scaffolding ( 12 mtr to 15 Mtr height) complete all as specified and directed by Engineer in charge.
S&F for elastomeric reinforced bearings for new mero space frame or otherwise complete all as specified and directed by Engineer in charge.
M&L for stainless steel work in tubular round/square pipes including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 complete all as specified and directed by Engineer in charge.
S&F Plain SS, 2mm thick sheet in wall cladding, steel gates and similer work, cut to size, holes punched; including round headed screws, clout nails or rivet and fixed to wood or steel framing with plain 40mm lap joint with rivets or welded seams, including bending or turning up, mitred angles etc as required complete all as specified and directed by Engineer in charge.
S&F perforated SS, 2mm thick sheet in wall cladding, steel gates and similer work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams, including bending orturning up, mitred angles, etc, as required complete all as specified and directed by Engineer in charge.
S&F cast iron cleats of size 75mmX40mmX4mm thick fixed with 03 Nos. rebats complete all as specified and directed by Engineer in charge.
S&F 6.00 mm thick polycarbonate sheets of superior quality in semi circle shape on roofs of desired colour and fixed with aluminium metal flat / angle/ tee sections including rubber beadings and silicon water proofing sealent jell for joining the sheets together and self tighteining screws of good quality complete all as specified and directed by engr-in- Charge.
S&F Aluminium composite sheet exterior grade 3mm thick for panelling work of any colour including aluminium frame work section size 50mm x 37mm x 1.50mm thick with approved solution to fix panel and aluminium core not less than 0.25mm complete all as specified and as directed by Engr-in- Charge.
M&L for point wiring concealed complete with 1.5Sqmm single core multistranded copper condutor FR PVC insulated and unheathed cable 1100 V grade confirming to IS 694 drawn through PVC conduit of suitable size heavy grade ISI marked including necessary conduit accessories plastic laminated sheet of approved shade 3mm thick including 1.5mm PVC insulated flame retradant copper conductor as in continous earth complete all as specified and as directed by Engr-in- Charge for the following:-
One light point controlled by one way switch.
One Ceiling/Exhaust/ wall mounted Fan point controlled by one way switch.
One 3 Pin 5 Amps socket out let on independent board
One 3 pin 5 Amps socket out let on same board
Ditto- all as per item No. 77 above but with 2.5 sqmm wire for 15 Amp socket outlet
S&F ceiling rose, surface bakelite, 65mm x 50mm two to three terminals
S&F switch socket outlet flush type 220 V with piano flush type controlling switch 5 oin 5 Amps
S&F swithc socket combination 2 in 1.5 pin, 5 & 15 Amps
Supply for repairing switch piano flush button single pole one way 5 Amps 250V
S&F MCB DB double door SPN 8 way 240 Volt AC complete all as specified and directed by Engineer-in-Charge
S&F in replacement of SPN MCB upto 10 Amps
S&F MCB SP 240 V 6-32 Amp 10KA
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories 230 V 1200 mm sweep min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as directed by Engineer-in-Charge
S&F exhaust fan, steel body AC single phase 230 V of size 300m sweep with blades, and frame and louvers complete as directed by Engineer-in-Charge
M&L for cutting opening in cement concrete/brick wall for exhaust fan complete all as specified and as directed by Engr-in- Charge.
S&F wall mounted fan of 400 mm sweep, 1400 RPM, oscillating type with speed changing Knobs including grouting of fixing screw in wall complete all as specified and as directed by Engr-in- Charge.
S&F 1x20 W LED tube light New E-lite LED tryca batten. A color changing LED batten luminaries comprises of thermally conductive material pre wired with high efficiency electronic driver along with high translucent frosted difffuser gets glare free smooth light distribution complete all as specified and as directed by Engr-in- Charge.
S&F 1x10 W LED tube light new E-lite LED Triyca batten. A color changing LED batten luminaries comprises of thermally conductive material pre wired with high efficiency electronic driver along with high transulant frosted diffuser gets glare free, smooth light distribution complete all as specified and directed by Engr-in- Charge.
M&L for sub main wiring with two runs of single core 4.0 Sq mm FRLS PVC insulated unsheathed multi stranded copper conductor 660 / 1100 V grade with colour code and one run of 2.5 Sq mm ( 22 / 0.3 mm ) single core FRLS PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor including PVC casing & caping all as directed. ( Note :Two runs of 4.0 Sqmm copper cable,one run of earth wire of 2.5 Sqmm copper cable shall be measured & paid as one length.) complete all as specified and as directed by Engr-in- Charge.
Supplying and laying old size brick as cable cover, size 230mm x 110mm x 75mm for cable protection complete all as specified and directed by Engr-in-Charge.
Material and labour for crushed stone sand cushioning to under ground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable complete all as specified and as directed by Engr-in- Charge. [Note : Measuremenet will be done after punning]
Boring for road crossing in any kind of soil/rock strata etc complete all as specified and as directed by Engineer.in.charge.
Supply and fix GI pipe medium grade with all connected accessories of sizes 40 mm complete for road crossing complete all as specified and directed by Engr-in-Charge.
Supply and fix GI pipe medium grade with all connected accessories of sizes 40 mm complete for road crossing complete all as specified and directed by Engr-in-Charge.
M&L for XLPE insulate armoured heavy duty eectric cable with aluminium conductor 1100 volts grade, cross sectional area 50 sqmm 3.5 core complete all as specified and directed by Engr-in- Charge.
Supply and fixing repairs MCB DB TPN 4 way double door type 415 V with bus bar complete all as specified and as directed by Engr-in- Charge.
Supply and fix MCCB's 415 V, 16 KA 4 poleof capacity 125A with sheet metal enclousures complete all as specified and directed by Engr-in- Charge.
S&F MCB TPN 240 V , 40Amps 10 KA complete all as specified and directed by Engr-in- Charge.
S&F MCB SP 5 to 40 Amps complete all as specified and directed by Engr-in- Charge.
S&F 120W LED highbay luminaryhaving fin ventilation technology for better thermal management and with cutting edges complete all as specified and directed by Engr-in- Charge..
M&L for providing earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm as earthing lead buried directly in ground vertically to a depth not less than 1.50 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised iron strip 20x3 mm as earthing lead by means of bolts, nuts, check nuts & washers etc made of GI and connected to earthing test point, providing charcoal and common salt all as shown in electrical plate No. 3 of SSR Part I of 2009 & as specified or indicated and testing on completion including exaction/earth work in any type of strata PCC (1:3:6) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete (1:2:4) type B1 (reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg/sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade and lugs, including galvanised iron strip 20x3 mm with GI protection pipe of 40 mm medium grade 7.5 meter long, etc complete all as specified and as directed by Engr-in- Charge. Note:- (i) Venders are bound to get earthing result upto 5 Ohm for single earthings and 3 Ohm with the grid of two earthing.Any additional work and material required to achive the required result is included in the cost deemed to be quoted rate by Contractor. (ii) Excavated material to be removed from the site and deposit at the distance not exceeding 50m distance and levelled. (iii) Refill the pit with M&L for black cotton soil 1 cum. (iv) On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. (v) Taking down all items in respect of existing earthing is included in the cost deemed to be quoted by contractor.
Parmatma Enterprises
shine industries
R&M INTERNATIONAL PRIVATE LIMITED
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .