SPECIAL REPAIRS TO GALLEY AND DINING HALL BLDG NO P 50 AND P AT INS CHILKA

Amount

Dismantling floor, hearth or wall tilling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for Non - skid/joint free ceramic tiles coloured 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified.

M&L Glazed colured ceramic tiles of size 350 mm x 250 mm x 7 mm thick or 450 mm x 300 mm x 7mm thick as in skirting,dado set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L Rendering or backing coat of mortar 10 mm thick in cement mortar 1:4 for fixing tiles in vertical surfaces such as skirting/dado,etc complete all as specified.

Taking down cement plaster on brick or stone wall etc including ranking out joints hacking for keys scrubbing down with water etc complete all as specified.

M&L for rendering 10mm thick in cement mortar 1:6 on internal wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for rendering two coats, first coat 10mm thick in cement mortar 1:6 and 2nd coat 5mm thick in cement mortar 1:4 with water proofing compound on external wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified. (Note : Supply only approved water proofing compound shall be measured and paid separately under relevant item)

Supply only water proofing compound complete all as specified.

M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified.

M&L Preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L Preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of primer including and including 3 mm thick wall care putty complete all as specified and directed.

M&L Preparation of old distempered surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L Preparation of new plastered surfaces of walls and applying two coats of weather proof exterior acrylic emulsion paint exterior grade (100% acrylic) over a coat of primer as per manufacturers instructions,complete all as specified and directed.

M&L Preparation of old painted surfaces of external walls by brooming down or steel wire brushing,scraping down greasy spots etc of any description and applying one coat of weather proof exterior acrylic emulsion paint exterior grade (100% acrylic) as per manufacturers instructions and rewrite the Bldg No. as per existing font,size and style complete all as specified and directed.

M&L cutting holes in brick walls of exc half brick but not exc one brick in cement mortar for inserting hold fasts and making good dismantled portion in CM (1:3) or PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as required complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm and not exc 4.0 sqm complete all as specified.

S&F Second class hard wood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified.

S & F 35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, divided in to squares with plain chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24(a) complete all as specified.

S&F 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood partcile board with commercial face veneers; supplied and fitted to chowkats complete all as specified.

S & F 100 mm size cold rolled mild steel (medium weight) butt hinges complete all as specified.

S & F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified.

S & F 150 mm long aluminium alloy handles, anodised,extruded, fabricated type, complete all as directed.

S&F 300 mm long, aluminium alloy,anodised sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as directed.

S & F 140 mm long floor door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring fixed in floor complete all as directed.

S&F 300 mm size ordinary rat tail rod pattern springs ,ISI marked including roller and plate complete all as directed.

S & F Powder coated (minimum thickness of powder coating 50 micron) aluminium anodised frame for sliding doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F Powder coated (minimum thickness of powder coating 50 micron) aluminium anodised window and ventilator shutters,fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, including aluminium anodised fittings such as 150 mm long 01 No. peg stay & type B-21hinges and 100 mm long handles (2 Nos) etc, complete all as specified and directed.

S & F Powder coated aluminium deco grills pattern of DG-202 with aperture of size 60x45 mm securing with suitable alumiium channel to frame complete all as directed.

S&F 4 mm thick plain sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sqm in each pane for fixing to aluminium/wooden joinery complete all as specified.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified.

M&L for steel rolling shutters of 1 mm thick without ball bearing as specified including top cover,anchoring rod,hasp and staple and one shop coat primer erected in position as indicated complete push pull or manual type complete all as directed by Eng-in-charge. Make : As approved by GE.

M&L for Ball bearings suitable size for rolling shutters complete all as directed by Eng-in-charge.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15 cm thickness(below or above ground level) and removing rubbish off the premises complete all as specified and as directed.

M&L for 100 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base of path way/hardstanding complete all as specified.

M&L for 100 mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as floorinr/path finished surface even and smooth without using extra cement complete all as specified.

Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or any thickness in floors, aprons,etc and removing rubbish off the premises complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cemnet slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified.

M&L for 20 mm thick granite slab of any type,machine cut as in flooring including laid over 15mm thick CM(1:4) cement screed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and polishing complete all as specified.

Rounding edges including grinding and polishing of stone slab such as in steps,cooking platforms and other similar workcomplete all as specified.

Taking down 15 mm bore steel tubing and connections including cleaning for removal to store complete all as specified.

All as per Item No.45 above but 20 mm bore complete all as specified.

S&F GI water tubing 15mm bore, medium grade conforming to IS 1239 (Part-1) including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, celling or laid on floors including testing complete all as specified.

All as per Item No.47 above but 20 mm bore complete all as specified.

Taking down eves rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc., complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary clamps complete all as specified.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary clamps complete all as specified.

S&F 110 mm bore PVC (SWR) bends with access door of any radius complete all as specified.

S&F 75mm bore PVC (SWR) bends with acess door of any radius complete all as specified.

M & L for 75 mm PVC (SWR) multiple floor trap with grating including jointing with solvent cement jointed to waste pipe complete all as specified.

S&F Stainless steel sink for kitchen with draining board (overall size 915x460 mm with bowl size 410x330x160mm) made out of 1 mm thick sheet with plug, washers, waste pipe,CI cantilever brackets and connecting to union, etc as fixed in repairs,complete all as directed.

S & F LDPE PVC pipe of 15 mm dia pressure rating 6 kg/sqcm as waste pipe in WHB/Sink/urinal,etc as fixed in repairs complete all as directed.

S&F Brass CP Towel rail,600 mm long,20 mm dia,D type, as fixed in repairs complete all as directed.

S&F 15 mm dia,bib taps,CP,fancy type,with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and as fixed in repairs complete all as specified.

S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe as fixed in repairs complete all as directed.

Taking down carefully copper / aluminium point wiring surface/concealed [light, fan, socket, ceiling or power] complete including fittings, switches, ceiling roses, pendents, regulators, sockets, holders stair case light etc., and making good the disturbed surfaces complete all as specified.

M&L Point wiring concealed with 1.5 Sqmm (Nominal area) PVC insulated, sheathed cable FRLSH grade with copper conductors, single core, multi stranded 1100 Volts, ISI marked (IS 694) (For Phase, neutral ) drawn through and including 20mm dia PVC rigid conduit ISI marked, (IS 9537 Part III) Heavy grade with conduit accessories including concealed steel terminal boxes fabricated out of 2mm thick MS sheet, fitted with 3mm thick masonite or approved laminated sheet top cover for fixing switches, sockets etc, including 1.5 sq mm FRLS multistranded copper conductor cable as continuous earth wire complete and connecting the earth wire to common earth dolly for one light/fan/ point controlled by one switch complete all as specified.

M&L Point wiring concealed with 4 Sqmm (Nominal area) PVC insulated, sheathed cable FRLSH grade with copper conductors, single core, multi stranded 1100 Volts, ISI marked (IS 694) (For Phase, neutral ) drawn through and including 20mm dia PVC rigid conduit ISI marked, (IS 9537 Part III) Heavy grade with conduit accessories including concealed steel terminal boxes fabricated out of 2mm thick MS sheet, fitted with 3mm thick masonite or approved laminated sheet top cover for fixing switches, sockets etc, including 4 sq mm FRLS multistranded copper conductor cable as continuous earth wire complete and connecting the earth wire to common earth dolly for power socket on indepedenet board complete all as specified.

Taking down carefully sub main wiring including batten/conduit by unscrewing from wall,ceiling,etc., and making good the disturbed surfaces complete all as directed.

M&L for sub main wiring concealed with two runs of 4 sq. mm multistranded copper conductor cable FRLSH grade 1100 volt and one run of 4 Sq.mm multistranded copper conductor cable FRLSH grade 1100 volt drawn through and including PVC rigid conduit heavy grade 25 mm dia complete all as specified. Note: Three runs of 4 Sq.mm cable and one run of PVC conduit will be measured as one unit.

M&L for sub main wiring concealed with two runs of 6 sq. mm multistranded copper conductor cable FRLSH grade 1100 volt and one run of 6 Sq.mm multistranded copper conductor cable FRLSH grade 1100 volt drawn through and including PVC rigid conduit heavy grade 25 mm dia complete all as specified. Note: Three runs of 6 Sq.mm cable and one run of PVC conduit will be measured as one unit.

M&L for sub main wiring concealed with four runs of 6 sq. mm multistranded copper conductor cable FRLSH grade 1100 volt and one run of 6 Sq.mm multistranded copper conductor cable FRLSH grade 1100 volt drawn through and including PVC rigid conduit heavy grade 25 mm dia complete all as specified. Note: Five runs of 6 Sq.mm cable and one run of PVC conduit will be measured as one unit.

M&L for sub main wiring concealed with four runs of 4 sq. mm multistranded copper conductor cable FRLSH grade 1100 volt and one run of 4 Sq.mm multistranded copper conductor cable FRLSH grade 1100 volt drawn through and including PVC rigid conduit heavy grade 25 mm dia complete all as specified. Note: Five runs of 4 Sq.mm cable and one run of PVC conduit will be measured as one unit.

S & F switch paino flush type single pole one way, 6 Amps, 230 Volts,50Hz complete all as specified.

S & F Switch socket combination with indication lamp,2 in 1,3 pin, 5 Amps, 240V, 50 Hz, flush type, multipurpose, complete all as specified.

S & F Switch socket combination with indication lamp,2 in 1,3 pin, 16 Amps, 240V,50 Hz, flush type, multipurpose, complete all as specified.

S&F Ceiling rose surface bakelite 65x50mm 2/3 terminals, 230 volts,50Hz, complete all as specified.

S&F Stepped type,single module electronic type fan regulator, AC, 240 Volts,300 W,50Hz, as fixed in repairs complete all as specified.

S&F Sheet metal enclosure SPN, with a two pin earth plug and socket,240V,50 Hz,with one MCB SP,20 Amps,complete all as specified.

Taking down carefully MCB DBs of any type by unscrewing from wall,ceiling,etc., and making good the disturbed surfaces complete all as directed.

Taking down carefully MCBs of any type by unscrewing from wall,ceiling,etc., and making good the disturbed surfaces complete all as directed.

S & F MCB DB,SPN, sheet metal enclosure, double door type, 12 way,AC,240 V with 200 Amps rated bus bar,IP-43 protection vertical/horizontal type with flush on wall complete all as specified and directed by Eng-in-charge.

S & F MCB DB,TPN, sheet metal enclosure, double door type, 4 way,AC,415 V with 200 Amps rated bus bar vertical/horizontal type with flush on wall complete all as specified and directed by Eng-in-charge.

S & F Vertical DBs,double door type, IP-43 protection,8 way,with provision of MCCB 4P 250 Amps as incomer with 200 Amps rated bus bar complete all as specified and directed by Eng-in-charge. Note: MCCBs/MCBs shall be measured and paid separately.

S & F MCCB 200 Amps, 36 KA, 4 P,415 Volts , 502 Hz complete all as specified and directed by Eng-in-charge.

S & F MCB SPN 40 Amps, 240 Volts complete all as specified and directed by Eng-in-charge.

S & F MCB 4P,100 Amps, 415 Volts , 50Hz complete all as specified and directed by Eng-in-charge.

S & F MCB 4P,63 Amps, 415 Volts , 50Hz complete all as specified and directed by Eng-in-charge.

S & F MCB SP 6 to 32 Amps, B Series,240 Volts , complete all as specified and directed by Eng-in-charge.

Taking down carefully Exhaust Fans, ceiling cable ends,dismantling blades,removing fan and blades for taking to store and rewinding, replacement of bearings,shaft bushes, condensor,capacitor,etc and refixing back to its original position after repairs complete all as directed by Eng-in-charge.

Taking down carefully Ceiling Fans, ceiling cable ends,dismantling blades,removing fan and blades for taking to store and rewinding, replacement of bearings,shaft bushes, condensor,capacitor,etc and refixing back to its original position after repairs complete all as directed by Eng-in-charge.

M&L Painting to Ceiling Fans, blades with synthetic enamel by spray painting complete all as directed by Eng-in-charge.

S&F 20 Watt,LED tube light fitting with lamp, Endura linear LED wall mounted LED batten,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver with all accessories complete all as specified and directed. Make : Havells cat part No.LUMILNE BS 20W LED 840 SP CWH or equivalent model in CG/ Bajaj/Philips.

M&L Earthing complete with galvanised steel earth plate electrode 600×600× 6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia (up to 7.5 m in length from earth plate ) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point including earth work and excavtion in any type of soil, PCC 1:3:6 type C1 chamber and RCC 1:2:4 type B1 cover 40 mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI light grade pipe for earth lead protection, 20 mm dia GI medium grade pipe for watering, water funnel, testing point etc complete all as specified and directed by Eng-in-charge and testing on completion.

PABITRA MOHAN PARIDA

HARI HARA NAYAK

ABHIMANYU MAHARANA

BHARAT KUMAR BALL

UDAYA BHANU NAYAK

d ravichandran

VAIKUNTHA PARIDA