REPAIR AND REPLACEMENT TO LT NETWORK, INSTALLATION EARTHING AND ALLIED WORKS IN TECH / DOMESTIC AREA AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: GE (AF) HAKIMPET

Name of Work: REPAIR AND REPLACEMENT TO LT NETWORK, INSTALLATION EARTHING AND ALLIED WORKS IN TECH / DOMESTIC AREA AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Contract No: GE/AF/HKPT/ OF 2025-2026 (8896/E8) SERIAL PAGE NO.

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT TOTAL AMOUNT In Words

1 Note : 1. Contractor need to purchase minimum 50% of all items mentioned in this CA within 20 days of getting sample approval and kept in custody so that no delay in work due to non-availability of materials will be faced. Contractor should ensure during the cause of work that he has minimum 25% of materials with him till the completion of item/date. 2. Contractor should buy the exact items which are given with catalogue reference. Other makes will be approved only by submitting non availability Certificate Company. Contractor need to remove all the dismantled items without delay. 3. Rate quoted for demolition/dismantling /taking down is inclusive of removing the same from site and dumping at given locations anywhere inside station. 4. Contractor will make his own arrangement to store his items. 5. Some places in this contract where the vehicle will not reach the spot directly, the material will be moved manually in these places. The rate quoted will be considered all inclusive on this account. 6. All trade skilled labour required in this contract shall be present daily in working hours, irrespective of complaints received. 7. Complaint for a similar items may be in scattered / different area, quoted rate will be considered all inclusive on this account. 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

1.01 Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth and getting in hard/dense soil for laying of cables/ for erection of poles/ for stay assembly etc complete all as specified and directed by Engineer-in-Charge. Cum Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

15 All as per item No. 10 here-in-before but of size 70 Sqmm, 3.5 core RM Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

19.01 Note:- (i) The unit rate shall include for GI water pipe, protection pipe wire mesh, funnel, excavation, RCC pit cover, PCC, test point, G I strip 32 X 6 mm from top of earth plate upto 5 mtr (ii) PCC pit shall be provided at least 1.5m away from the earth pit and extra cost of additional length of water pipes and fixing junction, Elbows etc. shall be deemed to be included in the unit rate. (iii) RCC pit cover shall be percast of RCC 1:2:4, type B-1, 80 mm thick reinforced with XPM weighing not less than 4kg/Sqm in liue of cast iron cover. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

24 M&L MCCB 4 Pole, current rating 250 Amp, microprocessor based, thermal setting adjustable 70%-100% breaking capacity 36kA at 415V,50Hz. Including both side spreader (Make : (Make : Havells/Indoashian /L&T/ Standard). Each Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

45.01 (a) Aluminium bus bar of capacity 400 Amp with heat shrinkable coloured PVC sleeve insulation mounted on suitable insulators for 3 phases and half of the capacity for neutral - 01 Set (b) MCCB, 250 Amps, 4 Pole,36 KA microprocessor based-01No.(incoming). (c) MCCB 100 Amp 4 Pole 25 KA - 03 Nos (Outgoing) (d) MCCB, 160 Amps, 4 Pole, 36 KA - 02 Nos (outgoing) (e) Change over switch 250 Amps, 4 Pole, 36 KA - 01 Nos. (f) Digital Voltmeter 0-500 Volts range with selector switch - 01 No. (g) Digital Ammeter 0-500 Amps range with selector switch and CTs - 05 Set (h) LED type pilot indicator lamps for R,Y,B phases - 01 Set of 3, Hardware of panel board including bolt, nuts gaskets etc. (j) Errection, testing & commissioning including PCC foundation blocks of 2x PCC block of size, 500mm x 300 mm x 100 mm for grouting of panel as directed by Engr In Charge - 01 Job Note:- Drawing will be approved by the accepting officer before placing demand to the manufacture. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

46.01 (a) Aluminium bus bar of capacity 1000 Amp with heat shrinkable coloured PVC sleeve insulation mounted on suitable insulators for 3 phases and half of the capacity for neutral - 01 Set (b) MCCB, 630 Amps, 4 Pole, 36 KA microprocessor based-01No (incoming). (c) MCCB, 250 Amps, 4 Pole, 36 KA - 01 Nos (Outgoing) (d) MCCB 160 Amp 4 pole 25 KA (outgoing) - 02 Nos (e) MCCB 100 Amps, 4 Pole, 16 KA - 02 Nos. (f) Digital Voltmeter 0-500 Volts range with selector switch - 01 No. (g) Digital Ammeter 0-500 Amps range with selector switch and CTs - 05 Set (h) LED type pilot indicator lamps for R,Y,B phases - 01 Set of 3. Hardware of panel board including bolt, nuts gaskets etc. (j) Errection, testing & commissioning including PCC foundation blocks of 2x PCC block of size, 500mm x 300 mm x 100 mm for grouting of panel as directed by Engr In Charge - 01 Job Note:- Drawing will be approved by the accepting officer before placing demand to the manufacture. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

47.01 (a) Aluminium bus bar of capacity 600 Amp with heat shrinkable coloured PVC sleeve insulation mounted on suitable insulators for 3 phases and half of the capacity for neutral - 01 Set (b) MCCB, 315 Amps, 4 Pole, 36 KA microprocessor based-01No.(incoming). (c) MCCB, 100 Amps, 4 Pole, 16 KA - 03 Nos (Outgoing) (d) MCCB 160 Amps, 4 Pole, 25 KA - 02 Nos. (Outgoing) (e) MCCB 63 Amps, 4 Pole, 16 KA - 01 Nos. (Outgoing) (f) Digital Voltmeter 0-500 Volts range with selector switch - 01 No. (g) Digital Ammeter 0-500 Amps range with selector switch and CTs - 06 Set (h) LED type pilot indicator lamps for R,Y,B phases - 01 Set of 3 Hardware of panel board including bolt, nuts gaskets etc. (j) Errection, testing & commissioning including PCC foundation blocks of 2x PCC block of size, 500mm x 300 mm x 100 mm for grouting of panel as directed by Engr In Charge - 01 Job Note:- Drawing will be approved by the accepting officer before placing demand to the manufacture. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

50.01 (m) Sensor Interface Support: (i) Tilt Sensor : Digital Tilt sensor with Modbus protocol : ZCT1360J (ID-5& Baud Rate 9600) DYNAMIC TILT Sensor (ii) Wind Sensor : Analog Type Output 0 to 10V or 40 to 20mA (iii) Main Controller/SCADA Interface: Yes, via RS485 - MODBUS RTU format (iv) Communication Interface : RS232 (v) Integrated debug : Yes, on External HMI display (n) Electrical Data (i) STC Power Supply : Max, 40V DC Supply (o) Environmental Data (i) Operating Temprature (Ambient) Range : -20 degree C to + 60 degree C (p) Mechanical Data (i) Product Dimentions (LxBxH) - in mm : 400 x 300 x 150 (ii) Product weight : 3 Kg Complete all as specified and directed. 2 Construction of chamber for 100mm sluices valve item3 10 Nos

51.01 Note : (i) Inspecting/ overhauling of manual/ motorised spring drive mechanism by checking mechanism, motor and gear assembly, gear assembly, stop bolt assembly, main shaft interlocking assembly, closing spring assembly, motor cut-off limit switch, replacement of damaged control wiring DC/ AC for smooth function of ACB, testing of contact resistance, insulation resistance and apply multi grease lubricant to function smoothly. (ii) Inspecting/ overhauling/ cleaning, by carbon cleaner solution and apply dry graphite conductive sealant for electrical contacts to avoid carbon deposits on contact surfaces. (iii) Assembling all items/ components parts to the respective position & testing the breaker and meggering before and after high voltage test complete. (iv) All test to be conducted infront of Engr-in-Charge or rep of Engr-in-Charge and all reports to handed over to Engr-in-Charge for further record 2 Construction of chamber for 100mm sluices valve item3 10 Nos

Please Enable Macros to View BoQ information