Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.6 LAccepted-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L1 | Accepted-AOC Awarded as first lowest bidder (L1) | |
| 2 | L2₹28.9 L+₹90,757.64 (3.24%)Rejected-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L2 | Rejected-AOC second lowest | |
| 3 | L3₹30.4 L+₹2.4 L (8.51%)Rejected-AOC PASHAN PUNE | L3 | Rejected-AOC third lowest | |
| 4 | L4₹31.3 L+₹3.3 L (11.8%)Rejected-AOC 26 3 BOMBAY PUNE ROAD LAXMI APARTMENT OPP BU BHANDARI SHOWROOM PUNE 411003 | PUNE | MAHARASHTRA | 411003 | L4 | Rejected-AOC forth lowest | |
| 5 | L5₹32.0 L+₹4.0 L (14.2%)Rejected-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L5 | Rejected-AOC fifth lowest |
Tender Value
₹27 L
EMD Value
₹54,000
Closing Date
2 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GERD PASHAN PUNE
GERD PASHAN PUNE
ADDITION ALTERATION TO DIRECTOR OFFICE VISITOR ROOM CUM PA OFFICE OF THE DIRECTOR AT ARDE PASHAN PUNE GE RD PASHAN
2023_MES_588072_1
GERD/PSN/TOKEN/01 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GERD PASHAN PUNE
As per tender documents
9 documents required · 9 mandatory
₹500
GERD PASHAN PUNE
₹54,000
Yes
19 May 2023
3 Apr 2023
5 May 2023
3 Apr 2023
2 May 2023
18 Apr 2023
3 Apr 2023 - 10 Apr 2023
Amount
Dismantling floor, hearth or wall tilling 7mm to 25mm thick including cement mortar bedding ( but not backing), and rubbish off the premises complete all as specified and directed.
Material and labour for Cement concrete 1:2:4 in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete all as specified and directed.
Providing and laying double charged Vitrified tiles of size 600mm x 600mm in floor (having thickness 8mm to 9mm) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 15 mm thick screed bed in cement mortar 1:4 jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.complete all as specified and directed.
Providing and laying Vitrified tiles of size 600mm x 600mm (having thickness 8mm to 9mm), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 10 mm thick bed of cement mortar 1:3 jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete all as specified and directed.
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer-in-charge.
Supply and fix Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles with 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% GW & 74% RW. The tile shall be laid on Silhouette 15mm face exposed grid. colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.5Kgs/M2 with a minimum pull out strength of 100 kgs. The Silhouette Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system and necessary angle of Armstrong/ Euro Bond/ ALU Decor make complete all as specified and directed.
Material and labour for providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame for Curved surfaces (frame work to be paid separately) complete all as specified and directed.
Extra for sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling complete all as specified and directed.
Providing and fixing false ceiling 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Note: Additional perimeter channels / ceiling sections shall be provided around the cut outs for light fittings A/C diffusers etc. Additional support for cut outs to be provided at no extra cost. The ceiling boards shall be fixed to the underside of the suspended grid using 3.5 mm x 25 mm self-tapping screws. The joints shall be finished with joint paper tape and jointing compound of approved make and providing and applying plaster of Paris putty for required thickness. The surface of the false ceiling fixed as above shall be prepared by sand papering, providing, applying and finishing a coat of approved make white cement putty, one coat of approved make cement primer and two or more coats of approved make and shade premium plastic emulsion, etc. Rate shall include making necessary cuttings for light fittings AC diffusers and other fixtures. No deduction shall be made and no extra payment made for making any opening up to 0.50 Sqm per opening. The rate shall include for all lead and lifts, labour, etc all as directed by Engineer-in-Charge. Exposed clear measurements only shall be considered for payment.
Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead complete all as specified and directed.
Providing and fixing one side decorative veneer facings plywood 4 mm thick, of approved manufacture conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface complete all as specified and directed.
Providing and fixing 1.5 mm thick decorative laminated sheet including necessary nail, adhesive complete all as specified and directed.
Material and labour for 2nd class teak wood moulded beading or Taj beading/ornamental bleading of size 18X5 mm complete all as specified and directed.
Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead complete all as specified and directed.
Providing second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length complete all as specified and directed.
Supply and fix powder coated Aluminium sliding windows three track with two glass shutters using 5 mm thick glass tinted and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using Aluminium powder coated sections, Alumini cleat, PVC track, bearing, handle lock rubber beading, etc complete all as specified and directed. Note Size of aluminum sections are as under :- (i) Three track top & vertical – Jindal main – 2010 Section No 20621. (ii) Three track bottom - Jindal main – 2010 Section No 20620. (iii) Shutter vertical section - Jindal main – 2010 Section No 20606. (iv) Shutter top & bottom - Jindal main – 2010 Section No 20604 (v) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc fixed to steel window including priming coat with approved primer all complete all as specified and directed.
Providing and fixing 35mm thick decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type panelling and glazing in panelled or glazed shutters for doors, (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Complete all as specified and directed.
Providing and fixing bright finished brass butt hinges of size 100x70x4 mm (ordinary type) with necessary screws etc. complete all as specified and directed.
Providing and fixing bright finished brass tower bolts (barrel type) 150x10 mm with necessary screws etc. complete all as specified and directed.
Providing and fixing chromium plated brass handles 125 mm with necessary screws etc. complete all as specified and directed.
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete all as specified and directed.
Providing and fixing bright finished brass door latch with necessary screws etc. complete all as specified and directed.
Supply and fix in repairs aluminum composite sheet cladding using 4 mm thick sheet of approved make consisting of a core of 3mm natural polyethylene core sandwitched between two skins (0.5mm each) of aluminum alloy with outer surface in all colour coating of PVDF paint in fully automatic coil coating process. The PVDF coated finished surface to factory protected with self-adhesive peel offoil tested to withstand at least 6 months exposure to local weathering conditions. The composite sheet cut and bend to shape profiles as required to, including perimeter extrusions base frame, extruded stiffeners, expansion fasteners & silicone sealant (Dow corning 789) required for installation as per approved elevation drawing as directed including necessary accessories complete in all respects. The rates shall be including the cost of all materials, tools, tackles, manpower, fuel, consumables, lead and lifts at all levels, design, fabrication, erection, finishing and dismantling of scaffolding and testing of water tightness, etc. as per manufacturerer's instructions / specifications complete all as specified and directed. Make: Armstrong, Euro Bond, ALU Decor.
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. complete all as specified and directed.
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in cement mortar 1:6 complete all as specified and directed.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed.
Material and labour for 10mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces complete all as specified and directed.
Supply and fixing in repairs Channeled Woodworks perforated panels of width 192mm, thickness of 15mm and length 2400 mm or as required by the GE, made of a high density fibre board with minimum 725 Kg/M3 density substrate with a laminated facing as per the approved shade & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a “Helmholtz” fluted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.52. The panels shall be mounted on special aluminium splines using clips and necessary aluminium frame work complete all as specified and directed. Make : Armstrong/ Euro Bond/ ALU Decor
Polishing on wood work new work with ready mixed wax polish of approved brand and manufacture complete all as specified and directed.
Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work complete all as specified and directed.
Material and labour for distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two or more coats) over and including water thinnable priming coat with cement primer complete all as specified and directed.
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as specified and directed.
Material and labour for distempering on old work (one coat) with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade. complete all as specified and directed.
Providing and laying Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing, moulding and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Supply and fixing Venetian blinds with design on inner face, roller type made of fiber cloth fixed to wall with necessary aluminium brackets, screws etc including Alluminium frame ropes, rollers etc as approved by GE and complete all as specified and directed.
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete all as specified and directed.
Providing and fixing double action hydraulic floor spring with stainless steel cover plate minimum 1.25 mm thickness of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be Powder coated (minimum thickness of powder coating 50 micron) smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
Providing and fixing for aluminium shutters of doors, windows & ventilators, powder coated aluminium (minimum thickness of powder coating 50 micron) including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) as per directions of engineer-in-charge.
Providing and fixing pre-laminated with decorative lamination on both side exterior Grade-I MDF Board 12 mm thick confirming to IS:14587 complete all as specified and directed.
Material and labour for painting with synthetic enamel paint two coats on new steel work of approved brand and manufacture to give an even shade complete all as specified and directed.
Providing, fixing 18 mm thick marine plywood conforming to IS: 710 for partition of toughened glass includind all necessary fittings etc. complete all specified and directed.
Providing and fixing toughened glass 12 mm thickness for door, partition, with necessary handles, etching, pivot arrangements etc. complete all as specified and directed.
Taking down copper/aluminimum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling rose, pendants, regulators, sockets , light fitting etc removing materials to store for keeeping in safe custody of for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces for walls, floors, etc complete all as specified and directed.
Taking down main switches & DBs/ metal clad box complete all as specified and directed.
Taking down sub main wiring of any size including PVC conduit/casing caping complete and making good the disturbed surfaces complete all as specified and directed.
Taking down carefully ceiling Fan/Wall/Exhaust fan of any sweep /size from location of any height after disconnecting from the live line & refixing the same complete all as specified and directed.
Material and labour for point wiring with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade single core multistrand FRLS copper conductor cable concealed in wall including PVC conduit of suitable size but not less than 19mm with all fittings and accessories for mounting fittings like switches, sockets and fan regulators etc at any height including one continous run of PVC insulated green colour 1.5 sqmm multi stranded FRLS copper conductor cable earth wire and connected to common earth dolly including chasses cutting and Modular switch/ sockets/ switch socket combination/Bell push and door bell any type, sheet suitable for modular boards and mounting accessories complete all as specified and directed for the following, Make of wire - Havells/Standard/Finolex :- - (a) One light point controlled by one ; one way switch
(b) One bell point controlled by one bell push
(c) One Fan point controlled by one ; one way switch
(d) One 3 pin 5 Amp socket out let controlled by one switch indep board.
(e) One 3 pin 5 Amp socket out let controlled by one switch on same board.
All as per item No 51 here-in-before but using 2.5 sqmm stranded copper conductor cable PVC insulated drawn with 2.5 Sqmm stranded copper conductor cable PVC insulated as continued earth wire complete all as specified and directed.
Supply and fix modular ceiling rose, surface bakelite, 3 terminals, 65mmx50mm complete all as specified and directed.
Supplying and fixing two module stepped type electronic fan regulator including connections complete all as specified and directed.
Material and labour for submain wiring with 4 run of single core 10 sq mm PVC insulated unsheathed cable 1100 volt grade with multistranded copper conductor drawn concealed in wall drawn into and including PVC conduit of suitable size including cutting chasses with all fittings and accessories fixed on walls/roofs/floors,etc and including provision of one run of 10 Sq mm PVC insulated copper wire as earth continuity conductor to the common earth dolly complete all as specified and directed.
Supply and Fixing 8 way (4+24) surface/ recess mounting, vertical type, 415V, TPN MCB distribution board sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for MCBs (But without MCBs and incomer) as required complete all as specified and directed.
Providing and fixing 125Amps and breaking capacity 16 KA and 4 pole MCCB with thermomagnetic release and terminal spreaders in MCCB DB including making connections as required complete all as specified and directed.
Supply and Fixing 5A to 32A rating MCB single pole , 240V, 10kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the MCB DB complete with connection, testing and commissioning etc as required complete all as specified and directed.
Supply and fix LED edge lit Luminaire suitable for recess mounting 2'x2', 36 Watt with polycarbonate housing integrated electronic driver complete at any height with all accessories including internally prewired complete all as specified and as directed. Make : Havells Cat No VENUSNEOHE2x2R36WLED857PIRSENSOR or equivalent in Philips/Crompton/Wipro
Supply and fix LED edge lit Luminaire suitable for surface mounting 2'x2', 36 Watt with polycarbonate housing integrated electronic driver complete at any height with all accessories including internally prewired complete all as specified and as directed. Make : Havells Cat No PLANOSUR2X2PLS36WLED857S0720 or equivalent in Philips/Crompton/Wipro
Supply and fix LED hexa shape light fitting Luminaire suitable for surface mounting size (LxWxH) in (600x520x81) mm 36 Watt Energy saving, environmental friendly, long life, corrosion resistant, decorative hexagon shaped, surface luminaires with PMMA diffuser and extruded aluminium housing with LEDs as light source with all accessories including internally prewired all as specified and as directed. Make : Havells Cat No MONDO600HEXP/ S36WLED857SPSWH or equivalent in Philips/Crompton/Wipro
Supply and fix LED focus light fitting 10W, track mounted LED light with modern design, compact size with high power COB LED to provide focused light including suitable track for mounting light fittings to indivisual light position internally prewired & including up with twin core twisted flexible copper wire internally prewired all as specified and as directed. Make : Havells Cat No UNECOTRACKLIGHTTS10WLED830S15 WHT or equivalent in Philips/Crompton/Wipro
Supply and fix LED round panellight fitting 16W, 220V, AC surface mounted down light fittings with low depth aluminium (99%) prurity heat sink in round PC diffuser track mounted LED light with modern design, compact size with high power including up with twin core twisted flexible copper wire internally prewired complete all as specified and as directed. Make : PHILIPS Cat No SM251C LED16S-6500 PSU or equivalent in Havell's/Crompton/Wipro
Supply & fix LED recessed mounted Downlight 9 watt with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver with higher design life class including up with twin core twisted flexible copper wire internally prewired complete all as specified and as directed. Make : Cat No INTEGRAPLUSDLRD9WLED830 of Havell's/Crompton/Wipro
Supply and fix LED surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver 9/10 watt light fitting with modern design, compact size including up with twin core twisted flexible copper wire internally prewired all as specified and as directed. Make : Cat No LUMILINEBS9WLED830SPCWH of equivalent in Havell's/Crompton/Wipro
Supply and fix Rigid conduit welded of external dia 20 mm dia including junction box with cover and outlets complete all as specified and directed.
Supply and fixing 50mm thick aluminium foil faced resin bonded fibre glass insulation(onduct)of density 24 kg/cu.mormineral wool insulation (non combustible) of density 44kg/cum after applying two coats of old setting adhesive (CPRX compound) sealing all joints with self adhesive aluminium tape & covering with0.63mmx19mm GI wire mesh netting but tingall joints and laced with GI wire complete as per specifications and as required.
S.K.HARAL
Rays Breakers
M/S NILESH BUILDERS
AJAY ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .