Loading…
Loading…
Tender Value
Refer Docs
Closing Date
24 Aug 2026, 2:30 pmClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
CLW
60 days
Expenditure
General
65
3 conditions · 2 needing a document upload
Supply should be as per tender specification
Railway reserves the right to purchase Bulk Quantity from those sources who have been approved by CLW as per CLW Item ID: 2100755 on or before the date of tender opening. ( for details regarding ordering on Approved / Developmental vendors please refer para 3.2 & 3.3 of Part B tender conditions
Preferably OEM/Approved sources as per UVAM ID should participate in the tender. Firms other than OEM/Approved sources should attach tender specific authorization along with their offer from the OEM/Approved sources with the tender itself.
18 conditions
Tender Condition: Packing Instructions PACKING MARKING : Packing should be as per governing Specification for safe delivery of consignment. Manufacturer to mark their name and date of manufacture as per tender specification and drawing, wherever indicated, or at a location where it may not get obliterated in service on the item being supplied by them against the purchase order.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
For any queries against the Tender please contact AMM/ELSD/RPM at 9384007291 ( Email ID- [email protected]). 2 Any technical clarification regarding Drawing/specification Can be obtained from the office of the Sr.DEE/ELS/RPM (SSE/ELS/RPM- 9003163098) Drawing (s) / Specification (s) can also be obtained from the above office after payment requisite cost
FOR Destination by ROAD/RAIL.
Tenderers are advised to check our website before submitting their offer whether any corrigendum to the tender has been issued or not.
2 conditions
I/We have carefully gone through the IRS conditions of contract (included and uploaded along with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". I/We hereby certify that no other sister concerns or affiliates (such as having common partner/director/promoter/owner/holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such sister concerns including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest [Para 2502 (e)], anti competitive practices [Para 2502(c)] and obligation to proactive disclosures [Para 2503]. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected, at any stage.
Validity of offers: Offers should be valid for 60 days after closing date of tender. Any offer having lesser validity shall be deemed as commercially unresponsive and will be summarily rejected.
1 location across Tamil Nadu · 40 Numbers total
Corridor light 4 feet 17 watts +_ 10% LED version of old 110 DC 4feet tube light fitting
65265148A
65265148A
Open - Indigenous
Goods
Tamil Nadu
₹0
Exempted
24 Aug 2026
22 Jul 2026
1 item · 40 Numbers total
Corridor light 4 feet 17 watts +_ 10% LED version of old 110 DC 4feet tube light fitting made of min. 1mm thick M.S or G.I fabricated and powder coated sheet as per new spec.No. CLW/ES/3/0672 Rev. 1 and Drawing No. CLW/ES/3/SK-1/0672 for replacement of old spec.No. CLW/ES/3/0041 in 3 phase electric l oco. Fixtures do not required any alteration in loco LED shall be of any brand already approved by CLW in s pec. Diffuser shall be of 1.5mm thick fire retardant polycarbonate cover with M.S/G.I sheet, powder coated caps on both sides. [ Warranty Period: 72 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/ELS/RPM, SR | Tamil Nadu | 40.00 Numbers |
| Total | 40 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5804661.pdf
ATTACHMENT
5804660.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .