WBPHED/EE/AMD/NIeT-25 of 2024-2025/6

Amount

Dismantling and lowering of the outdoor lighting luminaries from the top of the pole as well as outside of pump house by using of scaffolding arrangement after disconnection of electrical connection etc as per direction.

Dismantling and lowering of the indoor lighting luminaries and after disconnection of electrical connection etc as per direction.

Supply & delivery of following electrical accessories at site:-

70 Watt. LED Highly efficient IP66 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution, higher spacing between poles and maintenance-free system. (Make-Approved Make)

4 Core X 10 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable as per IS:7098(Part-1).(Make-Approved make)

3 Core X 1.5 Sqmm industrial flexible copper cable wire/dia-30/0.25 PVC insulated with PVC sheathed. (Make:Approved Make) (For Outdoor Pole light + Roof Top Light)

4 ft. long 22 Watt LED Tubelight Slim LED batten with aluminium housing and polycarbonate diffuser is an ideal replacement solution for existing battens/fluorescent lamps with elegantly designed end caps. (Make-Approved Make)

12 Watt LED ultra slim recess-mounting round downlighter designed with excellent thermally managed aluminium pressure die cast housing with heat dissipating fins for larger surface area finished in epoxy powder coated white to deliver high-efficacy light out put and uniformity. (Make-Approved Make)

Laying of one No. cable 4 Core X 10 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.(From Pole to Pole+ Meter to DB's)

Fitting & fixing of the outdoor lighting luminaries along with new & old accessories to the pole, building & gate etc as per direction of EIC.

Fitting & fixing of the indoor lighting luminaries along with new & old accessories to the pole etc as per direction of EIC.

Connecting the pole to earth busbar including S & F GI (Hot Dip) wire of size as below, spiral on pole body as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

No. 12 SWG.

Earthing with Gl earth spike(1822mmX20 mm) and grouted the same under the ground level as per direction.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.

4 Core X 10 Sqmm.

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. (Upto 9.0 mtr. long pole)

1st coat of aluminium paint over 1 coat of RO priming.

2nd coat of aluminium paint over 1st coat.

Supplying and Fixing Gl water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V,15 A Kit-Kat fuse unit, one NL on, porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. nainting (200 x 150 x 100mm )

Add. GST@18%

Add. Cess@1%

V P Concern (BID ID -5563975)

M/S. SWAPAN BANERJEE (BID ID -5564123)