REPAIR MAINT OF DG SETS SERVO VOLTAGE STABILIZER AND REPAIR TO SUMMER APPLIANCES AND CONNECTED VOLTAGE STABILIZER ETC AT NORTH AND SOUTH ZONE AT NAUSHERA UNDER AGE EM OF GE 862 EWS

Amount

Maintenance and complete servicing of DG set, of capacity 250KVA consisting of normal repairs required at 250 running hours or 6 months whichever is earlier including replacement of defective / worn out parts such as filters, gaskets, V belts, Engine oil, rubber hoses, worm drive clamps, nuts & bolts, cleaning of alternator with vacuum cleaner including greasing of bearings etc and testing and commissioning complete after necessary repairs all as specified and directed. Note: Replacement of unserviceable parts shall be measured and paid separately as "supply only".

All as per Srl Item No. 1.00 here-in-before but DG set of capacity 200 KVA.

All as per Srl Item No. 1.00 here-in-before but DG set of capacity 100 to 160 KVA.

All as per Srl Item No. 1.00 here-in-before but DG set of capacity 40 KVA to 63 KVA.

All as per Srl Item No. 1.00 here-in-before but DG set of capacity 15 KVA to 30 KVA.

Supply only diesel filter element with O ring suitable for D.G. Set 250 KVA complete all as specified and directed.

All as per Srl Item No. 6.00 here-in-before but DG set of capacity 200 KVA.

All as per Srl Item No. 6.00 here-in-before but DG set of capacity 100 to 160 KVA.

All as per Srl Item No. 6.00 here-in-before but DG set of capacity 40 to 63 KVA.

All as per Srl Item No. 6.00 here-in-before but DG set of capacity 15 to 30 KVA.

Supply only oil filter element with O ring suitable for D.G. Set 250 KVA complete all as specified and directed.

All as per Srl Item No. 11.00 here-in-before but DG set of capacity 200 KVA.

All as per Srl Item No.11.00 here-in-before suitable for but DG set of capacity 100 to 160 KVA.

All as per Srl Item No.11.00 here-in-before suitable for but DG set of capacity 40 KVA to 63 KVA.

All as per Srl Item No.11.00 here-in-before suitable for D.G. Set 15 KVA to 30 KVA.

Supply only By-pass filter element with O ring suitable for D.G. Set 250 KVA capacity complete all as specified and directed.

All as per Srl Item No.16.00 here-in-before suitable for D.G. Set 200 KVA capacity.

All as per Srl Item No.16.00 here-in-before suitable for D.G. Set 100 to 160 KVA capacity.

All as per Srl Item No.16.00 here-in-before suitable for D.G. Set 40 KVA to 63 KVA capacity.

All as per Srl Item No.16.00 here-in-before suitable for D.G. Set D.G. Set 15 KVA to 30 KVA capacity.

Supply only air filter element complete with outer and inner both suitable for D.G. Set 250 KVA capacity complete all as specified and directed.

All as per Srl Item No.21.00 here-in-before suitable for D.G. Set 200 KVA capacity.

All as per Srl Item No.21.00 here-in-before suitable for D.G. Set of capacity 100 to 160 KVA.

All as per Srl Item No.21.00 here-in-before suitable for D.G. Set of capacity 40 KVA to 63 KVA.

All as per Srl Item No.21.00 here-in-before suitable for D.G. Set 15 KVA to 30 KVA capacity.

Supply only fan belt suitable for D.G. Set of capacity 250 KVA.

Supply only fan belt suitable for D.G. Set of capacity 200 KVA

Supply only fan belt suitable for D.G. Set of capacity 100 to 160 KVA

Supply only fan belt suitable for D.G. Set of capacity 40 KVA to 63 KVA.

Supply only fan belt suitable for D.G. Set 15 KVA to 30 KVA capacity.

Replacement of rubber hose pipe set with clamps suitable for D.G. Set 250 KVA capacity complete all as specified and directed.

All as per Srl Item No. 31.00 here-in-before but DG set of capacity 200 KVA.

All as per Srl Item No. 31.00 here-in-before but DG set of capacity 100 to 160 KVA.

All as per Srl Item No. 31.00 here-in-before but DG set of capacity 40 KVA to 63 KVA.

All as per Srl Item No. 31.00 here-in-before but DG set of capacity 15 KVA to 30 KVA.

S & Filling of engine oil 15W 40 in different DG set at various location.

Supply and filling in coolant for Engine complete all as specified and directed.

Supply and fixing water temperature gauge including sensor and cable complete all as specified and directed.

Dismantling of radiator , transporting to and from work shop for and after overhauling such as: cleaning, de-scaling by washing with acid, repair for leakage, welding brazing & refixing in position including testing complete all as specified and directed. Capacity of D G Set: 250KVA

All as per Srl Item No. 39.00 here-in-before but DG set of capacity upto 200 KVA.

All as per Srl Item No. 39.00 here-in-before but DG set of capacity upto 100 to 160 KVA.

All as per Srl Item No. 39.00 here-in-before but DG set of capacity upto 40 to 63 KVA.

All as per Srl Item No. 39.00 here-in-before but DG set of capacity upto 15 to 30 KVA.

Replacement of water pump of capacity 200 KVA TO 250 KVA as per existing D.G. set complete all as specified and directed.

Replacement of fuel pipe steel braded with benzo bolts, washers etc, length 30 cm long complete all as specified and directed.

Replacement of fuel pipe steel braded with benzo bolts, washers etc, length 45/60 cm long complete all as specified and directed.

Replacement of fuel level indicator transparent PVC pipe of suitable dia for the fuel tanks complete all as specified and directed.

Overhauling & Calibration of FIP from the authorised dealer including petty repairs like nosel repair/replacement to make the FIP functional for DG set 40 KVA to 250 KVA capacity complete all as specified and directed.

Replacement of gaskets, springs including tappet setting etc complete all as specified and directed. Capacity of DG set of any capacity, complete all as specified and directed.

Replacement of turbo charger of suitable capacity (cortrage) complete for of DG set 40 KVA to 63 KVA. capacity complete all as specified and directed.

Replacement of turbo charger of suitable capacity complete for DG sets of 100 KVA to 250 KVA. capacity complete all as specified and directed.

S & F Battery in replacement of 12V 180 AH, Red coloured ,specially designed for Diesel Gen set, incl battery lead set of suitable size with thimble complete Make-Exide or equvalent to Amaron incl battery lead and thimbles etc, complete all as specified and directed.

S & F Battery in replacement of 12V 90/100 AH, Red coloured ,specially designed for Diesel Gen set, incl battery lead set of suitable size with thimble complete Make-Exide or equvalent to Amaron incl battery lead and thimbles etc complete all as specified and directed.

Supply only electrolyte of suitable specific gravity in sealed container for lead acid batteries complete all as specified and directed.

Overhauling of self starter of capacity 12 volts including repair/replacement of carbon brushes, bearings, bushes, rewinding of armature with super enameled winding wire and field, varnishing complete all as specified and directed.

All as per Srl Item No. 55.00 here-in-before but self starter of capacity 24 Volts.

Scraping old paint from the DG set 3 phase above 15 KVA upto 250 KVA cap and preparation of surfaces for painting. Repainting the DG sets by spraying synthetic enamel paint of approved colour, writing SM/MES No and cap with white paint, complete all as specified and directed.

Overhauling of engine mounted alternator including repair/replacement of rectifier, diode plate carbon brushes complete all as specified and directed. Capacity: 12/24 Volts

S & F in replacement Phase indicator LED lamp with holder in different colours i.e. Red, yellow & green, complete all as specified and directed.

Replacement of battery charging alternator 12/24 Volt suitable for 1500 rpm DG set as per exiting complete all as specified and directed.

Replacement of automatic voltage regulator for DG set of any capacity complete all as specified and directed.

M&L for replacement of PCB assembly control PCC 1301, Item Code No. 0327-1513-01 suitable for Cummins/Kirloskar Engine DG sets, complete all as specified & directed.

M&L for replacement of control assembly, Item Code No. 0300-6014 suitable for Cummins/kirloskar Engine DG sets, coomplete all as specified & directed.

Rewinding of alternator for any capacity, removing burnt out winding, cleaning internally with super copper enameled winding wire of suitable gauge including insulation, varnishing, drying complete at site, making electric connection and testing complete all as specified and directed.

M & L for repair of broken door of DG set Capacity from 15 to 250 KVA including complete denting paintaing with nut bolt, complete all as specified and directed.

REPAIR OF VOLTAGE STABILIZER:- Taking out unserviceable control wiring and including rewiring complete from voltage stabilizer capacity from 5 KVA to 25 KVA, 3 phase 415 volts of any make for unbalanced load, providing wiring loom complete, made out of suitable size PVC insulated copper conductor cable including cables lugs, connectors, channels etc, complete all as specified and directed.

All as per Srl Item No 69.00 here-in-before but capacity of stabilizers above 25 KVA and up to 40 KVA.

All as per Srl Item No 69.00 here-in-before but capacity of stabilizers 50 KVA and up to 63 KVA.

All as per Srl Item No 69.00 here-in-before but capacity of stabilizers 100 KVA and up to 250 KVA.

Replacement of analog voltmeter of size 72 x 72 mm range 30 to 300 volts complete all as specified and directed. Make: CAT Part No AE 62133 of AE or equivalent of make L&T/ Havels.

S&F in replacement printed control card circuit suitable for 40 KVA to 250 KVA any capacity voltage stabilizers complete all as specified and directed.

Replacement of synchronous motor single phase AC 230 volts suitable to work with voltage stabilizer up to 5 to 250 KVA capacity with torque up to 5 Kg/CM complete all as specified and directed.

Replacement of indicator with bulb, red, yellow or green 230 volts as per sample complete all as specified and directed.

Replacement of dimmer stat suitable for voltage stabilizer of any cap up to 5 to 25 KVA of any make to match with existing system complete all as specified and directed.

All as per Srl Item No.77 here-in-before but capacity above 25 KVA and up to 40 KVA.

All as per Srl Item No.77 here-in-before but capacity 50 KVA and up to 63 KVA.

All as per Srl Item No.77 here-in-before but capacity 100 KVA and up to 250 KVA.

Supply and filling of new transformer oil to various voltage stabilizers of die electric strength not less than 40 KV complete all as specified and directed.

Rewinding of Voltage stablizer, primary and secondary winding with super enamelled copper winding wire of size and gauge as per existing including insulation, varnishing, drying and testing for stabilizer of capacity of 5 KVA to 250 KVA complete all as specified and directed.

Scraping old point from the voltage stabilizer 3 phase above 5 KVA upto 250 KVA cap and preparation of surfaces for painting. Repainting the voltage stabilizers by spraying synthetic enamel paint of approved colour, writing SM/MES No and cap with white paint all as required at site or directed.

S & F in replacment of change over 4 pole off load type complete with thimbles for cable, fixed at walls/panels with capacity of 400 amps complete all as specified and directed.

S & F in replacement of change over 4 pole off load type complete with thimbles for cable, fixed at walls/panels with capacity of 200 amps complete all as specified and directed.

S & F in replacement of change over 4 pole off load type complete with thimbles for cable, fixed at walls/panels with capacity of 100 amps complete all as specified and directed.

Replacement of vibration pad for DG set of capacity 40 KVA to 250 KVA.complete all as specified and as directed.

Replacement of solenoid coil for DG set of capacity 40 KVA to 250 KVA all as specified and as directed.

Replacement of radiator fan for 100 KVA to 200 KVA DG set complete all as specified and as directed.

Cleaning of fuel tank for DG set of capacity 40 KVA to 250 KVA complete all as specified and as directed.

Repairs/servicing to AMF panel of capacity 200 KVA for minor repairs including complete wiring complete all as specified and as directed.

Replacement of silencer for DG set of capacity 100 KVA to 250 KVA of any make complete all as specified and as directed.

Supply,laying, jointing and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 240 sqmm 3.5 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts complete after taking down old unserviceable cable all as specified and directed.

S & F in replacement of battery terminal lead suitable for DG set complete all as specified and as directed.

Window AC Repair M & L for repair and maintenance incl disconnecting , taking down & refixing of window type AC's of capacity 1/1.5 TR comprising of the following works at different locations & including refixing, commissioning, testing, complete all as specified and directed :- (i) Inspecting, taking down, brushing cleaning with blower & including acid/detergent wash of condenser and cooling coil. (ii) Carry out running test of operation of blower and compressor and ensure that satisfactory functioning of all parts. (iii) Inspecting for leakage in the system. (iv) Checking the earth continuity of electrical parts. (v) Checking the functioning of thermostat. (vi) Inspection of all electrical parts. (vii) Testing the machine for satisfactory operation. Note:- (i) Any parts found unserviceable/defective shall be measured and paid separately under respectively item (here-in-after) of BOQ. (ii) Make of parts shall be as per original make of window type AC.

Supply only air filter of window type AC of capacity 1/1.5 TR as per existing Make & Model as required at site complete all as specified and directed.

Supply only cooling coil as per existing Make and Model for window AC 1/1.5TR & including soldering/welding, commissioning & testing complete all as specified and directed.

Disconnecting & taking down of window type AC 1/1.5 TR of any Make and Re-fixing the same after replacement of condenser coil as per existing Make and Model & including soldering/welding, commissioning & testing complete all as specified and directed.

S & F in replacement of fan and blower motor as per existing Make & Model and suitable for window air conditioner of capacity 1 TR complete all as specified and directed.

S & F in replacement of fan and blower motor as per existing Make & Model and suitable for window air conditioner of capacity 1.5 TR complete all as specified and directed.

S & F in replacement of blower as per existing Make & Model and suitable for window air conditioner of capacity 1.5 TR complete all as specified and directed.

Split AC Repair M & L for servicing and maintenance of split type AC's of capacity 1 TR/ 1.5 TR/ 2.0 TR comprising of the following works & installed at different locations & including testing complete all as specified and directed :- (i) Checking and rectifying the Indoor/outdoor units for noise free operation. (ii) Checking and rectifying the electrical connection & water leaking problem. (iii) Cleaning the Out-door unit condenser and In-door unit cooling coil with air blower and latest technology cleaning system. (iv) Greasing/Oiling of condenser fan motor and blower motor. (v) Checking and rectifying for any kind of refrigerant leakage. (vi) Checking the serviceability of remote control unit. Note:- (i) Any parts found unserviceable/defective rectified/changed shall be measured and paid separately under respectively item (here-in-after) of BOQ. (ii) Make(s) of AC's to be repaired are specified in Appx 'D'. (Voltas, Hitachi, Lloyd, Godrej, Bluestar) (iv) Providing Common tools, Special Tools, latest cleaning devices and Connected accessories is the responsibility of contractor.

Supply only capacitor combo running 36/45 mfd for split/ window type AC unit as per existing as required at Site complete all as specified and directed.

Supply only running capacitor 60/80 mfd for split/window type AC unit as per existing as required at Site complete all as specified and directed.

Supply only indoor blower fan motor, single phase, 230 Volt of split/window type AC Suitable for 1.5/2 TR capacity complete all as specified and directed.

S & F in replacement of burnt compressor of capacity 1.5 TR of split type AC unit and re-fixing the same after replacement from the company make original compressor as per existing Rotary Type Make & Model and including gas charging complete all as specified and directed. Note :- (i) Cost of Refrigerant gas (R-22/R-410A/R-32) shall be deemed to be included in the quoted rate. (ii) Empty /filled cylinder shall be responsibility of contractor and contractor shall liable for all risk against the same.

S & F in replacement of burnt compressor of capacity 2.0 TR of split type AC unit and re-fixing the same after replacement from the company make original compressor as per existing Rotary Type Make & Model and including gas charging complete all as specified and directed. Note :- (i) Cost of Refrigerant gas (R-22/R-410A/R-32) shall be deemed to be included in the quoted rate. (ii) Empty /filled cylinder shall be responsibility of contractor and contractor shall liable for all risk against the same.

M & L for repair to leaking area of split type AC unit of capacity 1.5 TR and including dehydration, gas charging of gas R22/R410A/R-32 as applicable, pressure check & testing complete all as specified and directed. Note :- (i) Cost of Refrigerant gas (R-22/R-410A/R-32) shall be deemed to be included in the quoted rate. (ii) Empty /filled cylinder shall be responsibility of contractor and contractor shall liable for all risk against the same.

M & L for repair to leaking area of split type AC unit of capacity 2.0 TR and including dehydration, gas charging of gas R22/R410A/R-32 as applicable, pressure check & testing complete all as specified and directed. Note :- (i) Cost of Refrigerant gas (R-22/R-410A/R-32) shall be deemed to be included in the quoted rate. (ii) Empty /filled cylinder shall be responsibility of contractor and contractor shall liable for all risk against the same.

S & F in replacement of air filter of indoor unit for split type AC units of capacity 1.5 TR as per existing Make & Model complete all as specified and directed.

S & F in replacement of air filter of indoor unit for split type AC units of capacity 2.0 TR as per existing Make & Model complete all as specified and directed.

S&F in replacement of insulation for Split AC Copper Tube 5/8 inch with Nitrile rubber insulation tube of OD thickness 10mm and length 6 ft per piece (minimized heat gain and loss, Good condensation control) followed with clamps complete all as specified and directed.

S & F in replacement of 3 core copper PVC insulated cable of size 2.5 Sqmm, flexible cables, 1100 Volts and confirming to IS: 694 complete all as specified and directed.

S & F in replacement of swing motor of indoor unit as per existing Make & model for split type AC, 1.5 TR complete all as specified and directed.

S & F in replacement of swing motor of indoor unit as per existing Make & model for split type AC, 2 TR complete all as specified and directed.

S & F in replacement of suction line (1/4") copper pipe or suitable size as per existing dia and length with Nitrile Rubber protection as required at site complete all as specified and directed.

S & F in replacement of discharge line (5/8") copper pipe or suitable size as per existing dia and length with Nitrile Rubber protection as required at site complete all as specified and directed.

S & F in replacement of PCBs indoor/ outdoor units as per existing Make & model for Split type AC of Capacity 1.5 TR complete all as Specified and Directed.

S & F in replacement of PCBs indoor/ outdoor units as per existing Make & model for Split type AC of Capacity 2.0 TR complete all as Specified and Directed.

S & F in replacement of electronic cordless remote control unit as per existing Make & model of split type AC's of capacity 1.5 TR complete all as specified and directed.

S & F in replacement of electronic cordless remote control unit as per existing Make & model of split type AC's of capacity 2.0 TR complete all as specified and directed.

S & F in replacement of Flexible PVC drain pipe of size 15mm bore & suitable for Split type AC of Capacity 1.5/2.0 TR complete all as specified and directed.

S & F in replacement of outdoor unit fan blade as per existing Make and model & suitable for Split type AC of Capacity 2 TR complete all as Specified and directed.

S & F in replacement of outdoor unit fan blade as per existing Make and model & suitable for Split type AC of Capacity 1.5 TR complete all as Specified and directed.

S & F in replacement of outdoor unit condenser fan motor as per existing Make & model and suitable for 1.5 TR capacity air conditioner complete all as specified and directed.

S & F in replacement of outdoor unit condenser fan motor as per existing Make & model and suitable for 2 TR capacity air conditioner complete all as specified and directed.

S & F in replacement of indoor unit complete set (Refrigerant Compatibility R22, R410A & R-32) compatable with all BEE Star Ratings AC's, copper tubes in evaporator coil as per existing Make & model & suitable for 1.5 capacity air conditioner and including gas charging complete all as specified and directed. Note :- (i) Cost of Refrigerant gas (R-22/R-410A/R-32) shall be deemed to be included in the quoted rate. (ii) Empty /filled cylinder shall be responsibility of contractor and contractor shall liable for all risk against the same.

S & F in replacement of outdoor unit (Refrigerant Compatibility R22, R410A & R-32) with compressor, Compressor compatibility; Rotary or Reciprocating both as per existing Make & model & suitable for 1.5 capacity air conditioner and including gas charging complete all as specified and directed. Note :- (i) Cost of Refrigerant gas (R-22/R-410A/R-32) shall be deemed to be included in the quoted rate. (ii) Empty /filled cylinder shall be responsibility of contractor and contractor shall liable for all risk against the same.

S & F in replacement of copper condenser coil as per existing and suitable for 1.5 TR capacity of air conditioner, outdoor unit, ISI marked and including gas charging complete all as Specified and directed. Note :- (i) Cost of Refrigerant gas (R-22/R-410A/R-32) shall be deemed to be included in the quoted rate. (ii) Empty /filled cylinder shall be responsibility of contractor and contractor shall liable for all risk against the same.

S & F in replacement of copper condenser coil as per existing and suitable for 2 TR capacity of air conditioner, outdoor unit, ISI marked and including gas charging complete all as Specified and directed. Note :- (i) Cost of Refrigerant gas (R-22/R-410A/R-32) shall be deemed to be included in the quoted rate. (ii) Empty /filled cylinder shall be responsibility of contractor and contractor shall liable for all risk against the same.

S & F in replacement of Low pressure valve as per existing Make & model complete all as specified and directed.

S & F in replacement of four way valve as per existing Make & model and suitable for 2.0 TR / 1.5 TR capacity of air conditioner, ISI marked complete all as specified and directed.

S&F in replacement of AC refrigerant charging Pin NRV Valve, complete all as specified and directed.

S & F in removal in shifting of Split AC's of capacity 1.5/2.0 TR with indoor, outdoor and including all the connected accessories after pumping down the gas, refitting, topping up the gas, testing and commissioning complete all as specified and directed.

S & F in replacement of ducting insulation sheet (9mm thick) for insulating refrigeration pipe line for 1.5/2.0 TR capacity of air conditioner complete all as specified and directed.

S & F in replacement of brass flare union connector (Pack of 4) for gas pipe line connection both in 1.5/2.0 TR capacity of Split Type AC complete all as specified and directed.

Water Cooler:- M & L for servicing & maintenance of water coolers of any capacity comprising of the following works at different location complete all as specified and directed :- (i) Inspection, taking down, opening, dismantling, descaling, brushing & cleaning of storage tanks. (ii) Examination water tightness, leak proof of storage tank after cleaning. (iii) Carry out operation of all stop cock, push cock, float valve etc. (iv) Inspect overflow and remove blockage if any. (v) Check and correct earth continuity of electric items. (vi) Check thermostat and test its functioning. (vii) Inspect drain pipe and remove blockage if any. (viii) Check and correct all electrical wiring & test its functioning. (ix) Testing of water cooler after repair. Note:- (i) Any parts found unserviceable/defective shall be measured and paid separately under respectively item (here-in-after) of BOQ. (ii) Make of parts shall be as per original make of water coolers.

S & F in replacement of thermostat switch as per existing Make & Model for water cooler of any Capcity complete all as specified and directed.

S & F in replacement of overload protector relay as per existing Make & Model for compressor of water cooler of any capacity as reqd at site complete as specified and directed.

S & F in replacement of condenser fan motor, single phase of 1/30 HP as per existing Make and Model & suitable for water cooler of capacity 40/80 Ltrs complete all as specified and directed.

S & F in replacement of condenser fan motor, single phase of 1/20 HP as per existing Make and Model & suitable for water cooler of capacity 60/120 Ltrs complete all as specified and directed.

S & F in replacement of 15mm bore brass float valves accessories as per existing Make and Model & suitable for water coolers at site, ISI marked complete all as specified and directed.

Disconnecting and taking down water coolers of capacity 40/80 Ltrs & 60/120 Ltrs of any make and size for repairs & including detection of leakage in the system rectifying the same, dehydration & recharging of gas (R-22/R-134A/Environmental Friendly Gas) suitable for compressor model & testing the water cooler for smooth & satisfactory operation complete all as specified and directed. Note :- (i) Cost of Refrigerant gas (R-22/R-134A/Environmental Friendly Gas) shall be deemed to be included in the quoted rate. (ii) Empty /filled cylinder shall be responsibility of contractor and contractor shall liable for all risk against the same.

S & F in replacement of CP push cock of size 15mm dia as per existing Make & model, ISI marked complete all as specified and directed.

S & F in replacement of capacitor 10 Mfd as per existing Make & model, ISI marked for water cooler of any capacity complete all as specified and directed.

S & F in replacement of burnt compressor as per existing original Make & model and suitable for water cooler of capacity 40/80 Ltrs and including gas charging complete all as specified and directed. Note :- (i) Cost of Refrigerant gas (R-22/R-134A/Environmental Friendly Gas) shall be deemed to be included in the quoted rate. (ii) Empty /filled cylinder shall be responsibility of contractor and contractor shall liable for all risk against the same.

S & F in replacement of burnt compressor as per existing original Make & model and suitable for water cooler of capacity 60/120 Ltrs and including gas charging complete all as specified and directed. Note :- (i) Cost of Refrigerant gas (R-22/R-134A/Environmental Friendly Gas) shall be deemed to be included in the quoted rate. (ii) Empty /filled cylinder shall be responsibility of contractor and contractor shall liable for all risk against the same.

Deep Freezer - M & L for repair & maintenance of Deep Freezer of capacity 200 to 320 Ltrs comprising of the following works at different location complete all as specified and directed :- (i) Inspecting, taking down, brushing cleaning with blower including acid/detergent wash of condenser and cooling coil. (ii) Carry out operation of blower and compressor and ensure that satisfactory functioning of all parts. (iii) Inspecting the leakage in the system. (iv) Checking of the earth continuity of electrical parts. (v) Checking the functioning of thermostat. (vi) Inspection of all electrical parts. (vii) Testing the machine for satisfactory operation. (viii) Check and correct all electrical wiring & test its functioning. (ix) Testing of Refrigerator after repair. Note:- (i) Any parts found unserviceable/defective shall be measured and paid separately under respectively item (here-in-after) of BOQ. (ii) Make of parts shall be as per original make of Deep freezer.

S&F in replacement fan motor of deep freezer 16 watts, 230 Volts single phase, complete all as specified and directed.

S & F in replacement of burnt compressor as per existing Company Make original & model and suitable for deep freezer of capacity 200-320 Ltrs and including gas charging complete all as specified and directed. Note :- (i) Cost of Refrigerant gas (R-134A/Environmental Friendly Gas) shall be deemed to be included in the quoted rate. (ii) Empty /filled cylinder shall be responsibility of contractor and contractor shall liable for all risk against the same.

S&F in replacement Deep freezer 1/2 hp, 3/8 hp, 1/3 hp compressor start relay, complete all as specified and directed.

S&F in replacement Deep freezer relay capacitor 12/15 mfd, complete all as specified and directed.

S & F in replacement of single pole and neutral sheet metal enclosure with a two pin and earth plug and socket and including one MCB SPN 20 Amps, 240 Volt, MCB, 'C' curve type with AC box, rupturing capacity 10 KA complete all as specified and directed.

S & F in replacement of MCB single pole 6 to 32 Amp, 'C' curve having rupturing capacity 10 KA conforming to IS-8828-1996, IEC-60898, complete all as specified & directed.

S & F in replacement of metal clad plug for all type of AC's as per existing Make and size complete all as specified & directed.

S & F in replacement of metal clad socket for all type of AC's as per existing Make and size complete all as specified & directed.

REFRIGERATOR - Dismantling refrigerator of any make any capacity for taking out compressor/condenser/freezer unit etc. for repair/ replacement of unserviceable parts, cleaning condenser/ freezer unit of foreign particle and descaling with carbon dioxide gas to ensure smooth flow of refrigerant gas, reassembling the appliance, testing and placing in position complete all as specified and directed. Note: Repair/ replacement of unserviceable parts shall be measured & paid separately.

S&F in replacement hermetically sealed compressor unit 1/8 HP for 165/175 Ltr refrigerator complete all as specified and directed.

S&F in replacement hermetically sealed unit compressor 1/6 HP for 280 to 310 Ltr refrigerators complete all as specified and directed.

S&F in replacement of PCB (printed control board) and sensor complete all as specified and directed.

Supply and filling of refrigerant gas R-134A of required quantity including detection and rectification of leakage before charging of gas into compressor including replacement of filters complete all as specified and directed.

S&F in replacement of copper capillary tube of refrigerator, any description complete all as specified.

S&F in replacement starting relay of refrigretor any capacity complete all as specified and directed.

S&F in replacement over load protector for refrigerator, any description complete all as specified and directed.

S&F in replacement Thermostat of refrigretor of any capacity complete all as specified and directed.

Solar water heater M&L for over hauling & servicing the solar water heater of any capacity by repair/replacing the spares and blocks in the solar cells removed by the acid cleaner, descaling and arresting leakages to be ractified including replacement of unserviceable/damages part complete all as specified and directed. Note:- Defective parts replaced will be measured & paid separately but all the petty items such as nuts bolts, washers, etc used for repair are included in the quoted rate.

Supply and fixing of Gasket set for solar water heater panel suitable for 100 Ltr capacity, complete all as specified and directed.

S & F of solar water heater heating element of suitable type and size, complete all as specified and directed.

S & F of solar light collecting panel flat type 100 ltr per day & rubber pipe 25mm, clamps etc incl all connecting items and fitted in existing place complete all as specified and directed.

Voltage stabilizer Dismantling electric connection of any make any capacity voltage stablizer for inspecting of burnt out relay, circuit board, etc. for repair/ replacement of unserviceable parts, testing and placing in position complete all as specified and directed. Note: Repair/ replacement of unserviceable parts shall be measured & paid separately.

S & F electromagnetic relay for capacity of 2.5 KVA stablizer, complete all as specified and directed.

S & F electromagnetic relay for capacity of 3 KVA stablizer, complete all as specified and directed.

S & F of electric circuit board for capacity 2.5 KVA stablizer, complete all as specified and directed.

S & F of electric circuit board for capacity 3 KVA stablizer, complete all as specified and directed.

S & F of elctric transformer for capacity upto 3 KVA, complete all as specified and directed.

Desert Cooler M & L for taking down and cleaning steel/plastic body desert cooler of any capacity any type of make/size and including fitting and fixture with wire, PVC pipe 3 Way Nozzle, removal of all sludges, loose paint, dust, dirt etc and prepared the surfaces for painting and applying two coats of synthetic enamel paint blue colour inside and out side surfaces of desert cooler and applying two coats rubber seal paint inside the water storage tank complete as specified and directed.

S & F in repair of fan motor as per existing capacity/Make & Model Copper wound, three speed 250 watt and suitable for steel body desert cooler,ISI marked complete all as specified and directed.

S & F in repair of fan blade Metal for 18" / 20" sweep and as per existing capacity / Make & Model suitable for steel body desert cooler complete all as specified and directed.

S & F in repair of submersible water pump minimum 18 Watt, Copper Winding, 1.5 Meter Liftting and as per existing capacity/Make & Model and suitable for steel / Plastic body desert cooler, ISI marked complete all as specified and directed.

S & F in repair of grass pads Aspen (wood wool) with chicken wire mesh as per existing size and suitable for steel body desert cooler complete all as specified and directed. Note: Minimum size 22" x 28", Minimum Thickness should be 1" and minimum weight should be 200 grams/set.

S & F in repair of PT switch as per existing capacity/Make & Model and suitable for steel body desert cooler, ISI marked complete all as specified and directed.

S & F in repair of Rotary switch as per existing capacity/Make & Model and suitable for steel/ body desert cooler, ISI marked complete all as specified and directed.

S & F in repair of flexible cord wire of 1 Sqmm, FRLSH 3 core of length 1.50 RM and including one 06 Amp 3 pin plug top as per existing size/Make & Model, ISI marked for steel body desert cooler complete all as specified and directed.

S & F in repair of 4 mfd capacitor as per existing size/Make and suitable for steel/plastic body desert coolers complete all as specified and directed.

S & F in repair of 5 amp,3 pin plug top complete all as specified and directed.

M & L in repairing of desert cooler steel body with MS sheet min 21 gauge thickness as per existing size/shape any size complete all as specified and directed.

KRISHNA ENGINEERING ENTERPRISES (BID ID -3495528)

M/S AKHILESHWAR ASSOCIATES (BID ID -3495355)