CONSTRUCTION OF KASTUBA GANDHI BALIKA VIDYALA (K.G.B.V) Model I Ramsu UKHRAL DISTRICT RAMBAN

Amount

Earth work in excavation by manual means in trenchesfor foundations, drains, pipes, cables etc. (Not exceeding1.5 mtr in width) and for shafts, wells, cesspits and thelike not exceeding 1Osqm on plan, depth upto 1.5mtr.including disposal of excavated earth upto 1mtr fromcutting edge, disposed earth is to be levelled and neatly dressed in:s.70 % all kind OF soil and 30% solid rock

Filling available excavated earth (excluding rock) intrenches, plinth, sides of foundation etc. Layers notexceeding 20cm in depth, consolidating each depositedlayer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering- All work upto plinth level1:4:8 (1 cement: 5 course sand : 10 gradedstone aggregate 40mm nominal size) Crushed (including all carriages lead and lift if any)

Providing and laying Cement Concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded brick aggregate 40mm nominal size) in retaining wall/return wall, columns etc. excluding cost of centering and shuttering, all work upto floor V level under floor (including all carriages lead and lift if any)

Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering- All work upto plinth level1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) crushed with 20% boulders (including all carriages lead and lift if any)

Supplying and filling in plinth with fine sand under floorsincluding, watering, ramming consolidating and dressing complete (including all carriages lead and lift if any)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars,piers, abutmen"ts, posts ans sturts, etc. upto floorfive level excluding cost of centring, shuttering,fmishing and reinforcement.1:1.5:3 (1 cement : 1.5 coarse sand : 3graded crushed stone aggregate 20mm NOminal size) (including all carriages lead and lift if any)

Brick work with common burnt clay F.P.S.(NOn-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) (incluing Extra for brick work in superstructure above plinth level upto floor V level.)

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(including all carriages lead and lift if any)

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, boltsand nuts 8mm diameter with bitumen and G. I limpet washersor with G. I. limpet washers filled with white lead and includinga coat of approved steel primer and two coats of approvedpaint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost ofpurlins, rafters and trusse 0.63mm thick with zinc coating NOt less than 27 5gm/m 2 (including all carriages lead and lift if any)

Providing ridges or hips of width 60cm overall width plain G.S.sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete. 0.63mm thick with zinc coating NOt less than 275gm/m

Providing and fixing insulating board ceiling of approved qualitywith necessary nails etc. complete (frame work to be paidseparately) : Natural colour insulating Ply 6mm thick

Providing and fixing plained eaves boarding.2nd class kail wood250x32 mm (nominal size)

Providing and fixing soil, waste and vent pipes : Sand cast iron S&S pipe 100 mm dia as per IS: 1729

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo I Fir wood

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.(including all carriages lead and lift if any)

Half brick masonry with bricks of class designation 75 in foundations and plinth in : Cement mortar 1 :4 ( 1 cement : 4 coarse sand) including Extra for half Brick masonry in superstructure above plinth level upto floor V level.(including all carriages lead and lift if any)

Providing and Fixing flat iron, hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden flungs and embedded in concrete cement block 1:2:4 min

Centnng and shuttering including strutting~ propping etc and removal of form work for.Lintel, beam, plinth beam ,girders,bressumers and cantilevers

Centering and Shuttering including strulling, popping and removal of form work Columns, Pillers ,Piers, Abutments, Poststs and Struts

Centering and Shuttering including strulling, popping and removal of form work suspanded floor , roofs,landings,balconies and access platform

Centering and Shuttering including strulling, popping and removal of form workedges of slab

Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed andfixed in position with hold fast lugs or with dash fastenersof required dia and length (hold fast lugs or with dashfasteners shall be paid for separately): Second Kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al!complete as per direction of engineer- in charge.35mm thick Second class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Ply wood 5 ply, 9 mm thick Decorative ply wood one side decorative veneer and commercial veneer on other face (type 1) conforming IS 1328 BWR type 12 mm thick

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10 kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt· hinges bright finished of required size with necessary screws.

Providing and fixing 35 mm thick wire gauze shutters _, using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws : Second class kail wood.

Providing and fixing M.S. grills of required pattern inframes of windows etc. with M.S. flats, square or roundbars etc including priming coat with approved steel primerall complete.Fixed to openings I wooden frames with rawl plugs screws etc(including all carriages lead and lift if any)

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works (including all carriages lead and lift if any)

Providing and fixing wooden mouled bedings to doors and window frame size (50 x 12)mm2nd class teak wood

Providing and fixing hand rail by welding etc to steel ladder, railing, balcony, railing and staircase railing including priming coat of approved steel primer GI tube (40mm) NOminal size (including all carriages lead and lift if any)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all carriages lead and lift if any)

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all carriages lead and lift if any)

6mm cement plaster 1 : 3 (1 cement: 3 fine sand) (including all carriages lead and lift if any)

Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to lS: 15622of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm

Providing and fixing Ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete.(including all carriages lead and lift if any)

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(including all carriages lead and lift if any)

Providing and fixing 18 mm thick granite of any colour and shape gang saw cut miNOr polished (pre moduled) and prepolished) machine cut for kitchen platform vanily counter window sills 20 mm thick base cement motor 1:4 with joints ireated with white cemetn mixed with matching pigment, epoxy touch ups, including rubing cusing modulig and polishing to edge to give high gloss finish etc complete at all levels (including all carriages lead and lift if any)

Extra for edge moduling to 18 mm thick marble stone counters vanities etc including machine polishing to edge to give high glos finish etc

Finishing walls with water proofing cement of required shade new work (two or more ocats) applied @ 3.84 kg/10 sqm

Providing and Applying white cement based putty of average thickness 2mm of approved brand and manufactured over the plastered wall surface to prepeare the surface even and smooth

Distampering with oil based bound washable distemper of approved brand and manufactured on wall surface new work ( two or more coar) ocer and including priming coat with cement primer

Applying priming coat of approved brand and maufacturer on new wrok

Printing with synthetic enamal paint of Approved brand and manufacturer to give an even shade, two or more coat on new work

Providing and laying plinth protection in cement concrete 1:3:6 excluding the cost of centering and shuttering, all work upto plinth level with crushed stone aggregate over 75 mm thick under layer of dry brick bats, including all costs and carriage of all material involved (including all carriages lead and lift if any)

providing and fixing aluminium sliding door bolts ISI marked aNOdize ( aNOdic coating) NOt less than grade AC10 as per IS 1868) transpaent or dyed to required colour or shade with nuts and screw etc complete (300 x 16)mm

Providing and fixing Aluminium tower bolts ISI marked anidized (aNOdic coating) NOt less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with screw etc complete (300 x 16)mm 100 x 10 mm

Providing and fixing Aluminium tower bolts ISI marked anidized (aNOdic coating) NOt less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with screw etc complete (300 x 16)mm200 x 10 mm

Providing and fixing Aluminium hanging floor door stopper ISI marked anidized (aNOdic coating) NOt less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with twin rubber stopper

Providing and fixing Aluminium handels ISI marked anidized (aNOdic coating) NOt less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with nuts and screw etc complete 125 mm

Providing and fixing Aluminium handels ISI marked anidized (aNOdic coating) NOt less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with nuts and screw etc complete 100 mm

Providing and fixing white vilreous china pedestial type water closet with seat and lid, CP brass hinges and rubber buffers, 10 ltr low level various china flushing cistern with fillings. CI/MS brackets 40mm diameter flush bend, overflow arrangement with special of standard make WC plan with ISI marked while solid plastic seal lid with vitreous china flushing and CP lush bend

Providing and fixing salem stainless steal A ISI 304 (18/8 kitchen sink as per IS 13983 with CI brackets stainless steel plugs 40 mm including painting of fillings and brackets, cutting and making the good walls wherever required. Kitchen sink with drain board 470 x 420 mm bowl depth 178 mm

Providing and fixing wash basin with Ci brackets 15mm Cl brass pillar taps, 32 mm CP brass waste of standard pattern, including, painting of fillings fillings and brackets, cutting and making the good walls wherever required. White vitreous china wash baisin size 630 x 450 mm

Providing and fixing white vitreous china pedestial for whas baisin completely at the back for the reception of pipes and filling

Providing and fixing GI fitting and clamps including cutting and making good the wall etc (Internal work) 15mm NOm dia 50

Providing and fixing GI pipe fitting and clamps including cutting and making good the wall etc (internal work) 20mm

Providing and fixing GI fitting and clamps including cutting and making good the wall etc (external work) 15mm NOm dia 50

Providing and fixing GI pipe fitting and clamps including cutting and making good the wall etc (external wall exposedon wall) 20mm NOm

Providing and fixing PVC waste water / rain water disposal 100 mm NOm dia

Providing and fixing PVC waste water / rain water disposal 75 mm NOm dia

Providing and Fixing PVC bends 75 mm dia pipe = 20 NOs

Providing and Fixing PVC bends 100 mm dia pipe = 20 NOs

Providing and Fixing PVC pipes for sink or wash basin including PVC waste littings complete 40 mm dia

Providing and Fixing CP brass long NOse cock of app quality 15 mm NOm dia

Providing and Fixing Cpstop cock ( conceled/ of standard design)

Providing and Fixing brass bids cock of app quality

Providing and fixing PTMT towel rail complete withbrackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved quality andcolour450 mm long towel rail with total lengthof 495 mm, 78 mm wide and effectiveheight of 88 mm, weighing not less than 170 gm

Providing and fixing PTMT towel ring trapezoidal shape215 mm long, 200mm wide with a minimum distance of37 mm from wall face with concealed fittingsarrangements of approved quality and colour, weighingnot less than 88 gms.

Providing and fixing CP bras angle valve for basin mixer and giyser points of approved make conforming IS 8931 15 mm NOm

Providing and fixing (600 x 450) mm bevelled edge mirror of superior glass( of approved quality) complete with 6mm thick hard based ground fixed to wodden with CP brass screws and washers complete

Providing and placing on terrace (at all floor levels)polyethylene water storage tank lSI : 12701 marked indicatingthe BIS License No. with cover and suitable lockingarrangement and making necessary holes for inlet, outletand overflow pipes but without fittings and the base supportfor tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license]

Providing and fixing mirror of superior glass(of approvedquality) and of required shape and size with plastic .moulded frame of approved make and shade with 6 mm thick hard board backing

Electric wiring with 1.5 sqmm copper cable including 20 mm dia 2mm thick PVC pipe 5amp with sunken box and connection to the main pole complete as directed by engineer-incharge.

MOHAMMAD MUSTAFA SOHIL

sh. Bashir Ahmed Wani

SHRI MUTAHIR AHMED MIR

TANVEER AHMED MIR

wassim