Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹15,319
Closing Date
12 Jan 2021, 5:30 pmClosed
Executive Engineer, LPWD Kavaratti
Executive Engineer, LPWD Kavaratti
Special Repair and Maintenance of Transit Accommodation allotted to President Cum Chief Counselor at Kavaratti (Type V Quarter No.E6)
2021_UTL_1402_1
NIT No.56/NIT/EE Kvt/2020-21
Open Tender
Civil Works
Item Rate
30 days
Kavaratti
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
Executive Engineer, LPWD Kavaratti
₹15,319
20 Jan 2021
7 Jan 2021
13 Jan 2021
7 Jan 2021
12 Jan 2021
7 Jan 2021
Amount
Demolishingcementconcretemanually/bymechanicalmeans including disposal of material within 50 metres lead as per direction of Engineer in charge. 1:3:6 or richer mix
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metre lead.For thickness of tiles above 10 mm and upto 25 mm
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of Fine sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge
Providing and laying vitrified tiles in floor with diffrent sizes ( thickness to be specified by the manufacture) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved brand and manufacture, in all colours and shades, laid with cement based high polymer modifeid quick settile adhesive ( water based). (Khajaria polished vitrified tiles or equivalent) Size of tiles 800x800 mm
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work.
Finishing wall with texture exterior paint of required shade on new work (two or more coats applied @3.28ltr/10 sqm) over including priming coat of exterior primer applied @ 2.20 kg/10 sqm
Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area 40 square centimetres and above
Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position-I class Karimaruthu or equivalent ( hold fast lugs or dasg fastener shall be paid for separately
Providing and fixing 4mm Bamboo board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): Bamboo board 4mm thick
Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate,with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 20 mm dia.
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or Lhooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m2(red colour)
Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.80mm thick with zinc coating not less than 275gm/m2
Providing and fixing PVC pipe half round eaves gutter with M.S brackets including bolts and nuts and necessary fitting as per approved brand and manufacture etc ..complete 200 mm (10kg/sqcms)
Painting with synthetic enamel paint of approved brand and manufacture of required colourtogive aneven shade One or more coats on old work
Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. External work
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil
Cement concrete block (machine moulded) masonry in in Foundation and plinth in CM 1:6 with blocks of size 40cmx20cmx10cm
Providing and laying cement concrete 1:2:4 ( 1 cement: 2 M.Sand: 4 granite chips 20 mm nomoinal size) foundation and plinth
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
Transportation of dismantled materials from work site to store yard
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-incharge.
Aboosalih C P
Abdul Shukoor B
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .