Construction and Execution of 150KLD Ultrafiltration and RO unit in Water Treatment Plant at ACTREC, Kharghar, Navi Mumbai - 410210

Amount

Total of Part A

Total of Part B

Description of Work / Item(s)

Amount

PART A

UF Block: Quantity:1 Set. Permeate Capacity:10 m3/hr Module Type:Hollow Fiber Total Membrane Area:80 M2 Piping:UPVC; 1 Lot. Piping:UPVC; 1 Lot. MOC of skid:MS Epoxy Painted. Auto Control Valve:Make - AIRA/Equi - 6 Nos.

UF BACKWASH SYSTEM: UF Backwash pump: Capacity:10 m3/hr @ 2.5 kg/cm2. Type:Horizontal multistage. Motor:415V/50Hz/3 Ph/2900 RPM. MOC:SS304. Pressure gauge:Pressure gauge 100 mm dial 0-7 kg/cm2 Rotameter:Rotameter 0-80 m3/hr Bypass type. Piping:Suitable UPVC

Hypochlorite dosing system: Dosing pump Quantity:1 Nos. Dosing pump Capacity:0-10LPH. Dosing pump Type:Tank Mounted. Dosing tank capacity:100 Ltr. Dosing tank MOC:PE. Instrument:Level gauge 1 No and level switch 1 No

Hydrochloric acid dosing system: Dosing pump Quantity:1 Nos. Dosing pump Capacity:0-10LPH. Dosing pump Type:Tank Mounted. Dosing tank capacity:100 Ltr. Dosing tank MOC:PE. Instrument:Level gauge 1 No and level switch 1 No

Sodium hydroxide dosing system: Dosing pump Quantity:1 Nos. Dosing pump Capacity:0-10LPH. Dosing pump Type:Tank Mounted. Dosing tank capacity:100 Ltr. Dosing tank MOC:PE. Instrument:Level gauge 1 No and level switch 1 No

UF CIP tank: Quantity:1 No. Instrument:Level gauge 1 No. MOC:HDPE

SITC of RO High pressure Pump: Quantity:2 Nos (1w+1s), Capacity:10 m3/hr @ 10 kg/cm2. Type:Vertical multistage. Motor:415V/50Hz/3 Ph/2900 RPM. MOC:CI. Pressure gauge:Pressure gauge 100 mm dial 0-16 kg/cm2. Instrument:Pressure switch 2 Nos (Low & high pressure switch). Piping:UPVC Piping

SITC of Supply, installation, testing, commissioning of Filter Feed Pump,Type Horizontal Centrifugal Pump,Capacity-10 m3/hr at pressure of 3Kg/Sqcm, Horizontal Multistage pump, Motor : 415V/50Hz/3 Ph/2900 RPM.,Head-30 M,MOC of Pump-CI. Including supply installation, testing and commissioning of pressure guage, Rotameter 0-80 m3/hr Bypass type as per the instruction of engineer incharge. Pump efficiency-70% or more

SITC of Multigrade Filter :Sand Media - 600KG; Carbon Media - 600KG-(1 Nos),Capacity-10 m3/ hr.,Size-Diameter : 600mm HOS : 1800mm Maximum, MOC- MSEP,Frontal Piping -UPVC,Piping Size-25 NB,Valves Type- Multiport valve,Filter Media-Multi grade Sand,Test Pressure- 3.5 Kg/cm2,Maximum Working Pressure- 4 Kg/cm2. Pressure drop: 0.8Kg/Sqcm. Pressure Guage : Bourden tube type, 100 mm dial 0-7 kg/cm2

SITC of Micron cartridge filter: 20" PP Housing with 20" jumbo PP

SITC of RO Block: Quantity:1 Set. Permeate Capacity:7.5 m3/hr. Membrane Types:8040 Hydronautics CPA-2. No. of Membranes:8 Nos. Mounting:SS304 Skid. Pressure gauge:Pressure gauge 100 mm dial 0-16 kg/cm2 with :Fully Automated Control Panel. Instrument:Rotameter. Pressure gauge on RO permeate & Reject 1 No.

SITC of RO DOSING SYSTEM: De-chlorination dosing system: Dosing pump Capacity:0-6LPH. Dosing pump Type:Tank Mounted. Dosing tank capacity:100 Ltr. Dosing tank MOC:PE. Instrument:Level gauge 1 No and level switch 1 No

SITC of Anti-Scalent dosing system: Dosing pump Quantity:1 Nos, Dosing pump Capacity:0-6LPH, Dosing pump Type:Tank Mounted, Dosing tank capacity:100 Ltr, Dosing tank MOC:PE, Instrument:Level gauge 1 No and level switch 1 No

SITC of Hydrochloric acid dosing system: Dosing pump Quantity:1 Nos, Dosing pump Capacity:0-6LPH, Dosing pump Type:Tank Mounted, Dosing tank capacity:100 Ltr, Dosing tank MOC:PE,Instrument:Level gauge 1 No and level switch 1 No

SITC of PH correction dosing system: Dosing pump Quantity:1 Nos. Dosing pump Capacity:0-6LPH. Dosing pump Type:Tank Mounted. Dosing tank capacity:100 Ltr. Dosing tank MOC:PE. Instrument:Level gauge 1 No and level switch 1 No

RO water transfer pump: Quantity:2 Nos (1w+1s) Capacity:10 m3/hr with 30Mtr Head. Type:Mono Bloc/Submersible, Motor:415V/50Hz/3 Ph/2900 RPM, MOC:SS316. Pressure gauge:Pressure gauge 100 mm dial 0-7 kg/cm2, Rotameter:Dp type flow meter for 80 NB Line size. including supply and installation of Piping:80 NB CPVC

CIP system: CIP pump capacity:7 m3/hr @ 3.0 kg/cm2 CIP tank capacity:2000 Ltr MOC HDPE. Dosing tank MOC:PE. Instrument:Level gauge 1 No for DIP tank, pressure gauge 2 Nos

Core Cutting for holes in concrete upto 400mm in size clean with cleaning of debris and carting it away from ACTREC premises or dumping as per the instructions of engineer- in charge. Cleaning of dust caused due to core cutting is also in the scope of contractor.

Core Cutting for holes in brickwork upto 400mm in size clean with cleaning of debris and carting it away from ACTREC premises or dumping as per the instructions of engineer- in charge. Cleaning of dust caused due to core cutting is also in the scope of contractor.

Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge.

15 mm cement plaster of mix for wall with ready mix plaster wherever required as per the instructions of Engineer incharge

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Removing and refixing Doors and Windows as per the instruction of Engineer incharge.

Painting: Providing and applying One coat primer and one waterproof base coat and two coat of textured Elastomeric paint of approved make, quality and colour including scrapping the surface to remove all loosely adhered particles followed by washing with water then wire brush so as to ensure thorough cleaning and opening up all the visible cracks in the plaster, in V- groove fashion using electric cutter machine. Fill up these cracks with cement past and polymer in ration of 1:1. Finish the same to ensure crack matched plaster level all complete as per the instruction of engineer incharge.

Providing and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putty of average thickness of 2 mm of approved thickness, brand and manufacture, over the plastered wall surface to prepare the surface even and smooth ready for painting purpose etc complete ( Rate inclusive of Scaffolding Material, Labour Charges) Etc. Only to be applied at distressed areas and newly plastered surface as per the instruction of Engineer incharge.

Supplying, Installation, testing and commissioning of complete piping and fittings of Ultrafiltration and RO plant. It includes all types of pipes, valves and other accessories as required and approved by engineer in charge. Submerged Piping-HDPE IS 4984 : 1995 Covered Piping -CPVC

Supplying, Installation, testing and commissioning of following instruments required for plant Level Sensors/Controllers.

Supply, Installation, Testing & Commissioning of Earthing system conforming IS: 3043 for equipments as required for 150 KLD UF and RO plant.

Laying of copper strip as per the instruction and sizes as required for the Complete RO plant

Electrical Control panel and equipments . Fabricated in 16 SWG CRCA sheet with non-compartment, dust and vermin proof, Wall Mounted. Suitable as per Equipment & Instrument. MOC for cable for equipment :PVC Insulated Copper Armored cable. Automation:PLC based. Cabling:1 Lot Size of Cable:Suitable as per Equipment & InstrumentMOC of cables for Equipment’s:PVC insulated copper flexible cable. MOC of cables:Copper Flexible wire

Flow meters : Supplying, Installation, testing and commissioning of flow meter of following parameters:-Capacity-15 m3/hrType-Inline pipePipe Size-100 mm

Supplying, Installation, testing and commissioning of main incoming power cable of size 3.5C x 50 sqmm XPLE Armoured Al conductor with all termination accessories and laying accessories including HDPE pipe of 100mm dia. This is including Excavation and laying of cables as per the instruction of engineer incharge.

C.P.V.C. PIPE 25mm dia- providing, laying , jointing, fitting & testing C PVC pipe SDR of heavy quality following dia for hot & cold water distribution system of approved make (prince, fiNoslex, supreme, liason, Astral make) including all fittings and scaffolding and support to pipe required as per site requirement for concealed pipe laying by chasing in wall, floors and making good the same to the original condition and for open type of pipe laying and fixing in proper line & level with necessary PVC clamps wood packing etc. fixing the joints with proper solvent or threaded type fittings or press type fittings etc. complete all as per specified and directed by Engineer in Charge.

UPVC Brass BALL VALVE - 25mm size Providing & fixing in position approved make (prince, fiNoslex, supreme, liason, Astral make) with hand wheels at top including testing for 10 kg/sq pressure with clean & potable water with a minimum testing duration of two hours etc. and rectification of leak if any all as per specification and directedby Engineer-In-Charge.

Providing and fixing of non return valve (horizontal/vertical) of approved make 25mm dia. With test certificates and all necessary fixtures such as flanges, adaptors etc. as required as per the instruction of engineer in charge. Material should be of approved make.

CONCRETE BREAKING: Breaking of the existing Reinforced or plain concrete by chiselling at all level including scaffolding and staging and the work shall be carried out so as to cause minimum inconvenience to hospital activity including cost of all material, labour, tools etc. carting away the debris out of hospital premises all complete as specified and directed.

Brickwork BREAKING: Breaking of the existing concrete by chiselling at all level including scaffolding and staging and the work shall be carried out so as to cause minimum inconvenience to hospital activity including cost of all material, labour, tools etc. carting away the debris out of hospital premises all complete as specified and directed.

Description of Work / Item(s)

Amount

PART B

Providing Operation and Comprehensive Maintanance Contract of complete 150KLD Ultrafiltration and RO unit in Water Treatment Plant as installed as per PART A (as per detail scope of work as mentioned in tender document terms and conditions. for a period 5 years After completion of Work)

Operation and Comprehensive Maintanance of 1st year

Operation and Comprehensive Maintanance of 2nd year

Operation and Comprehensive Maintanance of 3rd year

Operation and Comprehensive Maintanance of 4th year

Operation and Comprehensive Maintanance of 5th year

AGILE VENTURES

Red Circle Industries

Oxybee Solutions Private Limited

SSB Infrastructure Pvt Ltd.,

BLUEWATERTECH SERVICES PRIVATE LIMITED

Red Circle Industries

Oxybee Solutions Private Limited

AGILE VENTURES

SSB Infrastructure Pvt Ltd.,

BLUEWATERTECH SERVICES PRIVATE LIMITED

AGILE VENTURES

Red Circle Industries

BLUEWATERTECH SERVICES PRIVATE LIMITED

Oxybee Solutions Private Limited

SSB Infrastructure Pvt Ltd.,