SPECIAL REPAIR TO TOILETS AND STORE TO BUILDING NOS P 89A 90A 91 AND 91A AT AF STATION DEOLALI UNDER GE (AF) OJHAR

Amount

Taking down chowkats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering including ridge complete all as specified and directed.

Demolitin of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Cutting holes in stone walls built in cement mortar exc. half brick but not exc.one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required all as specified and directed complete all as specified and as directed.

Supply & fix factory made solid panel PVC door frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet & edges to printed to match with printed sheet, reinforced with MS Square tube, complete all as specified and directed.

Supply & fix factory made solid PVC Moulded door shutters 28 to 30 mm thick (stile) with 2.4 or 6 raised panel design with but 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face fixing in frame at site as per specification & drawing complete all as specified and directed.

Supply and fix rolled mild steel framed work as in doors or gates of angle or other section conforming to Fe 410-W (grade E-250, quality- B) with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, fastening and fixing complete all as specified and directed..

Supply and fix 1.25 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed..

Supply and fix mild steel butt hinges heavy weight cold rolled 125 mm size all as specified.

Supply and fix 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and as directed.

Supply and fix aluminium, anodised, barrel tower bolt of extruded section, 200 mm long all as specified and as directed.

Supply and fix extruded aluminium alloy handle fabricated type anodised 150 mm long all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint on steel surfaces over one coat of red oxide zinc chrome primer of any description over 10cm width or girth including preparation of new steel surfaces complete all as specified and as directed.

Material & labour for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base all as specified and directed.

Material and labour for machine cut kota stone slab 20-25 mm thick (mirror finished) over and including 20 mm thick cement screed base in CM 1:6 as in flooring/steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and polishing and moulding on edges of steps complete all as specified and directed

Material and labour for machine cut kota stone slab 20-25 mm thick (mirror finished) in window/ ventilators jams, cills, riser and trades of steps, skirting,dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles including rounding the edges of kota stone over and including 10mm thick backing coat in cement mortar (1:4), surfaces finished even and rough to receive tiles complete all as specified and directed.

Material and labour for joint free non skid coloured ceramic tiles of area exceeding 0.11 sqm but not exceeding 0.18 sqm each tile and of thickness 7mm to 8mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 5mm thick screed bed or bedding layer of cement mortar (1:6) finished even and rough to receive the top layer complete all as specified and directed.

Material & labour for glazed coloured ceramic tiles in vertical surface 450 x 300 x 6 to 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile including 3 to 5mm thick cement slurry over backing coat/bedding layer of cement mortar 1:4, 15 mm thick on brick work /stone masonry or concrete surfaces complete all sa specified and directed.

Materials and labour for machine cut Cudappah stone slab 20 to 25mm thick and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing and cutting over and including screed bed 15mm thick in CM 1:6 complete all as specified and as directed.

Material & labour for 20 to 22 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like jointed and laid over and including 10 mm thick screed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick cement screed/ rendering in CM 1:4 including roughening surfaces of old/ new concrete floor/wall by picking, sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm complete all as specified and as directed.

Labour only for round chamfering to the edges of granite exc 15mm wide but not exc 50mm wide on granite stone shelves all as directed.

Material and labour for 75mm thick PCC 1:3:6 mix type C-1 20 mm graded aggregates as in plinth protection finished even fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and as directed.

Material and labour for brick work with fly ash old size bricks in straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 all as specified and as directed

All as per item No 29 above but in half brick thick walls built in cement mortar 1:4

Dismantling of unframed fillets, rails, posts, rafters, purlins etc, under 40 Sq. cm in section all as directed.

Material and labour for rolled steel sections as in main and cross beams, hip and jack rafters: purlins where connected to common rafters and running rails and guides for sliding doors: fixed with angles cleats or other connecting plates conforming to Fe 410-W (Gde E-250) quailty A all as specified and directed.

Supply and fix Grey colour galvalume sheet with base metal thickness (BMT) of sheet not less than 0.5mm, multirib TM profile, minimum 550 Mpa yield strength having maximum pitch of 250 mm c/c and minimum 28 mm crest depth as in roof covering/cladding to wall, fixed with self tapping screws including providing crimp at eaves level shape of crimp complete all as specified and directed. Note: The quoted rate shall be deemed to included for provision of end flashing and no extra payment with regard will be made to the contractor.

All as per item No 33 above but as in ridges with self tapping screws.

Material and labour for mild steel as in wind ties, valley gutter strips, hold fast and brackets for holding boarding etc.complete all as specified and as directed.

Material and labour for rendering 10 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed

Material and labour for rendering 5 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar 1:3 as in ceiling finished even and fair without using extra cement all as specified and directed.

Material and labour for preparation of new plastered surfaces and applying two coats of distemper oil emulsion over 2 mm thick wall care putty on walls complete all as specified and as directed.

Material & labour for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as directed and as specified.

Material and labour for complete removal of existing treatment of walls by steel wire brushing and applying two coats of distemper oil emulsion over a coat of chalk whitening as preparatory to distempering on surfaces of walls all as specified and as directed.

Supply & fix framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410 or Fe 310 all as specified and as directed.

Supply & fix Powder coated anodised aluminium frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Supply & fix Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

Supply & fix Powder coated Anodised aluminium window of thickness not less than 50 micron and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

Supply and fix 5.5 mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and directed.

Supply & fix mild steel wire cloth 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks or stainless steel wire staples complete all as directed.

Supply & fix in repairs aluminium (die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as directed.

Supply & fix brass mortice lock, vertical type size 100 mm,4 levers complete all as specified and as directed

Supply and fix aluminium, anodised, barrel tower bolt of extruded section, 200 mm long all as specified and as directed

Taking up or down old steel tubing and connections including cleaning for refixing or removal to store of 15mm bore all as specified and as directed .

All as per item No. 51 above but of 25 mm bore.

Supply and lay15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified and as directed .

Refixing old steel tubing 15 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc all as specified and as directed .

All as per item No. 53 above but of 25 mm bore.

All as per item No. 54 above but of 25 mm bore.

Material & labour for cutting chases, pinning in with daimond cutter , making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. ; and cutting chases for concealed water tubing or concealed conduit wiring, etc.,and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Supply and fix in repairs chromium plated angle valve type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head complete all as specified and as directed

Supply & fix in repair 15 mm bore stop valves, concealed cast copper alloy chromium plated, fancy type with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for unions and fixed and taking down old one all as specified and directed.

Supply and fix bib tap in repairs of 15 mm bore, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of approved make and all as directed.

Supply and fix in repairs viterous china wash hand basin (oval type), of approved colour, flat back of size 550 x400mm excluding taps, chain and plug and porcelain stopper but including CI brackets and cutting for and pinning in ends of brackets or errecting stand and CP waste fittings and PVC waste pipe of 32mm dia complete all as specified and directed.

Supply and fix in repairs 15 mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repairs Vitreous china table top wash hand basin white of size 450 x450x175mm including all necessary accessories all as specifed and directed. Make: Jaguar Model No. JDS-WHT-25905 or equivalent in Shakti/ Hindware as approved

Supply and fix in repairs sensotronic sensor faucet for wash basin omplete all as specified and directed. Make: Jaguar Model No. SNR-CHR-51027 or equivalent in Johnson/ Hindware as approved

Supply and fix in repair chromium plated towel rail 600 mm long all as directed. Make: Jaquar or equivalent in Shakti/ Hindware as approved.

Supply and fix in repairs chromium plated shower rose, 75 mm dia with or without swivel joints including fixing to steel pipe or union of 15 mm dia all as directed.

Supply and fix in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Supply and fix in repairs shelf of PTMT and of size as per existing and as approved, fixed with and including chromium plated brass screw and wooden/plastic cleats (minimum weight 300 gms) complete all as specified.

Supply and fix liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified.

Supply and fix in repairs vitreous china squatting pan Orissa pattern size 580 x 440mm white with 'P' or 'S' trap front or back inlet and integral foot rests including connection to trap to flush pipe etc complete including for making good to disturbed surfaces of floor to match with existing specification etc complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet pan (Pedastal pattern), white including necessary connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover, mild steel chromium plated hinging device complete but excluding flushing cistern including making good damaged/ disturbed surfaces complete all as specified and as directed.

Supply and fix health faucet (ABS body) including 0.8mm dia , 1.2 mtr long flexible tube and wall hook and MS anodised hanging device complete all as specified and as directed. Make: Jaquar, Model No-ALD-CHR-593N and equivalent all as directed.

Material and labour for PCC (1:5:10) type E2 using 40mm graded stone aggregate as in filling of sunken slab all as specified and directed.

Material and labour for rendering 15mm thick on brick work or concrete surfaces in CM 1:4 with and including water proofing compound to sunken portion with proper slope towards outside and finishing cement concrete or brick work surface even and smooth using extra cement including application of 90 micron polythene film and applying bitumen coating @ 3.00 Kg/Sqm complete all as specified and as directed. Note: WPC shall measured and paid separately.

Supply and fix in repair PVC flushing cistern 10 ltr capacity including PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC

Supply and fix Vitreous china Urinal, half stall type Vitreous China urinals, (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) all as directed

Supply and fix in repair including Viterous china urinals complete all as specified and directed. Make: Jaguar Model No. URS-WHT-13261 of size 355x345x535 or equivalent in Shakti/ hindware as approved.

Supply and fix in repair sensotronic concealed type flushing valve for urinal complete set with installation box with control cock Make: Jaquar, Model No. SNR-STL-51087 or equivalent in Johnson / hindware as approved.

Supply and fix PVC connections "15 mm size of length 450 mm" with PTMT nuts all as specified and as directed.

Supply and fix rotational moulded polyethylene water storage tanks of 2000 litre capacity (cylindrical vertical with closed top) two layered, hoisted and fixed in position complete including 25mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tank of any capacity complete all as specified & directed. Note: Contractor may provide 3 layered tanks without any extra cost at their option

All as per item No 81 above but of 1000 litre capacity.

Supply and fix in repairs 15 mm bore gun metal, globe or gate valve with iron wheel head , screwed both ends for iron pipe all as directed.

All as per item No 83 above but 25 mm bore.

Taking down old eaves gutters and rain water pipes/ sewage pipes of any material/ description & similar situation, all fittings of any size and pattern including cleaning or refixing or removal to store complete all as specified and as directed.

Supply and fix 110 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls and roof all as specified and directed.

All as per item No 86 above but 75 mm bore

Supply & fix PVC (SWR) vent cowl 110mm dia complete as directed.

All as per item No. 88 above but of 75 mm dia.

Supply & fix PVC (SWR) bends 110mm dia complete as directed.

All as per item No. 90 above but of 75 mm dia.

Supply & fix in repairs PVC floor trap 75mm bore plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply and fix 50mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 fixed to walls, ceiling or under floors all as specified and as directed.

Material & labour for rubber moulded concrete chequered tiles with grey cement pigment of size 20 cm x 20 cm x 25 mm thick laid over and including 15 mm thick cement mortar screed in CM 1:6 as in floors jointing and pointing in neat cement slurry complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for roof, chajjas, etc all as specified and as directed.

Material and labour for 40 mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in roof padding complete all as specified and directed.

Material and labour for 15mm thick bedding layer in CM (1:4) on concrete surfaces (when concrete is green) mixed with WPC @3% by weight of cement finished the surface fair and even complete all as specified and directed. Note:- WPC shall be measured and paid separately

Supply only integral water proofing compound of approved make

Material & labour for roof treatment over existing non accessible RCC roof slab/ chajja/ canopy/ parapet wall through be executed through approved applicator of the the membrane manufacturer complete as mentioned herein below: (i) Cleaning the concrete surfaces obtained after demolition/taking down of existing water proofing treatment thoroughly with wire brushes, washed and dried. (ii) Applying bitumen primer @ 0.3 Litre/ Sqm as per manufacturer instructions (iii) Cleaning the plastered roof surfaces and applying a coat of hot blown bituminous primer @ 0.3 kg/sqm on top of dry surface. (iv) Laying 3 mm thick APP modified water proofing membrane weighing not less than 3.6 kg/ each reinforced with non woven polyster fibre and shall be laid by torch application method longitudinal direction duly thermofused by flame torch all as specified in application manuel of the company. (v) Applying bituminous aluminium paint in two coats @ 0.2 Kg per Sqm.

SEWAGE DISPOSAL Note: Demolition of unreinforced cement concrete and supply of IWC shall be maesured under relevant here-in-before.

Demolition of reinforced cement concrete (reinforcement shall be cut as required to facilitate demolition) not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

Demolition of brick or stone/boulder masonry, built in cement /cement lime mortar including all quoins, arches, pillars, etc, complete all as specified and directed.

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr in depthfor foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in soft/loose soil all as specified and directed.

Demolition and breaking up drain pipes of any dia (Salt glazed ware, AC or PVC Pipes) set in cement mortar all as directed.

Material & labour for concrete bed to drain pipes 150 mm bore in PCC 1:4:8 type D2 using 40 mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Material & labour salt glazed stoneware drain pipes grade 'AA' for internal diameter pipe 150 mm dia laid in trenches and jointed as specified.

Material and labour for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified and directed.

Material & labour for brick work with sub class 'B' old size bricks, straight or curved on plan exc. 6m mean radius built in CM 1:4 all as specied and directed.

All as per item no 107 above but except bricks.

Material & labour for PCC 1:2:4 type B-1 using 20 mm graded broken stone aggregate as in filleting and benching slightly rounded etc including necessary form work all as specified and directed.

Material & labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with water proofing compound @ 3% by weight of cement finished even & fair without using extra cement all as directed. Note: WPC shall be measured and paid separately under relevant items of this schedule

Material & Labour for precast cement concrete in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in manhole cover slabs, landings and similar small articles with plain fair surfaces and set in CM 1:4 all as specified and as directed.

Supply and fix mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends binding with mild steel annealed wire not less than 0.9mm dia or securing clips, complete all as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, internal dia of pipe 150mm complete all as directed.

Returning, filling in and ramming with approved excavated soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick all as specified.

Removing excavated material to a distance exceeding 250 mtr and not exceeding 500 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

Material and labour for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, (Horizontal or sloping) surface finished smooth all as specified and directed.

Material and labour for use and waste of formwork to edges of concrete Slabs exc 5 cm but n exc 10 cm wide for fair finished surfaces

Material and labour for RCC M-20 using 20mm graded stone aggregate in man hole cover slabs , shelves etc all as specified and directed.

INTERNAL ELECTRIFICATION Note: Excavation,RFR shall be measured under relevant items here-in before.

Taking down carefully existing aluminium /copper point wiring of any description (batten /casing & capping /surface in PVC /steel conduit) light, fan, sockets etc. complete including fittings such as terminal boxes, switches, sockets, ceiling rose, lamp holders, brackets, sketch fitting, pendants fan regulators and making good the disturbed surface of walls, floors etc. including re-fixing in the original position after fixing of fal ceiling complete all as specified and directed.

Material and labour for point wiring (concealed on wall and suface on ceiling) complete with two single core FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including heavy duty PVC casing & capping not less than 25mm wide including all necessary accessories and making good the disturbed surface with and including suitable sunken box with earth dolly arrangement with surface plate for mounting modular switches /sockets /regulators etc., and one run of 1.5 sq mm copper earth continuity copper conductor FR grade connected to earth dolly complete for one light point /fan point/ exhaust fan/push button controlled by one switch all as specified and as directed.

All as per SI item No. 120 above but for one 3 pin socket out let 5 Amps on same board.

All as per SI item No. 120 above but for one 3 pin socket out let 5 Amps on independent board.

All as per SI item No. 120 above but with two runs of 2.5 Sqmm cable and one run of 2.5 Sqmm cable as earth wire for one 3 pin socket outlet/ power point 15 Amps controlled by one switch.

Supply and fix switch piano, flush button, single pole, one way, 5 Amps, 230V complete all as specified and as directed.

All as per SI item No. 124 above but 15 Amps

Supply & fix socket out let 2 in 1, 5 pin 5 Amps flush type complete all as specified and as directed.

Supply & fix socket out let 2 in 1, 3 pin 5 and 15 Amps flush type complete all as specified and as directed.

Supply and fix ceiling rose of 3 phase/PVC/ polycarbonate, insulated body 65 x 50mm two or three terminals all as directed.

Supply and fix in repairs lamp holder PVC/ Polycarbonate type with back plate suitable for batten fitting Single Phase AC 230 Volts complete all as directed.

Supply and fix in repairs and connecting up LED light fittings 1x18/20 Watt, 4 feet long complete with LED rod 18 /20 Watt, spring loaded rotary holder, connector etc. complete and connecting up with and including 23/ 0.0076 size 3 core copper flexible wire from connector to ceiling rose/ adopter including all necessary fixing arrangements complete all as specified and directed. Make: Crompton fitting DMLN1LT8-16, 1x18/20 W and LED rod LT8-20-865-2 or equivalent in Philips/ C& S as approved by the GE.

Supply and fix exhaust fan 230V 300mm sweep heavy duty metalic body with all connection arrangements and necessary nut bolts etc including wall cutting and making good distrubed surfaces if necessary and connecting with flexible wire of size 23x0.0076 for connecting up to ceiling rose all as directed. Make : Havlles model Ventilair DB NEO, Single phase or equivalent in CG / Orient as approved by the GE.

Supply and fix in repairs sheet metal enclosure 4 way MCB SPN distribution board 240/415 volt, double door with DIN rail bus bar, neutral link, earth terminal etc IP-43, IK-09 protection all as specified and directed.

Supply and fix MCB SP 6 to 32 Amps 240 volts, C series of breaking capacity 10KA including making connection complete all as specified and directed.

All as per item No 133 above but SPN 6 to 32 Amps.

Material and labour for providing earthing complete with galvanised steel earth plate electrode 60cmx 60cmx 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) surrounded with alternate layer of charcoal and salt as directed with top edge of the plate not less than 1.5 mtres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion including earthing pit in PCC 1:3:6 type C-0 & 40mm thick precast RCC cover in 1:2:4 type B1 reinforced with 8mm dia TMT bar @ 75mm c/c both ways with 02 Nos lifting handles of 12mm dia MS plain bar, GI pipe 20mm dia light grade with funnels & wire mesh for watering and 15mm dia light grade GI pipe for earth lead protection etc including necessary excavation and earth work in any type of soil complete all as specified and as directed. Note: GI lead wire and protection pipe upto 7.5mtr is deemed to be included in the quoted rate.

Material and labour for laying and jointing of XLPE insulated armoured heavy duty electric UG multistranded cable with aluminium conductor, 1100 volts grade including necessary lugs etc.,of size 6sqmm, 2 core including testing complete all as specified.

Supply, fixing, intalling and testing of water heater storage vertical type of capacity 25 Litres of high energy saving 5 Star rated with multiple saftey including all fixing arrangement all as specified and as directed. Make: Havelles model Monza - DX (5 star rated) or equivalent in CG/ Racold as approved by the GE.

Supply, fixing, intalling and testing Bulk head fittings environment friendly, ultra modern, energy saving, surface mounted, decorative Oval bulk head edge-lit LED luminaire comprising of high brightness LEDs complete all as specified and as directed. Make: Crompton cat No. LBHE-10-CDL or equivalent in Philips/ C& S as approved by the GE.

Supply and fix in repairs energy meter single phase with LCD display 10-30 Amp capacity all as specified and directed. Make: Model No- EM 101 Cat No.WM 101BC 5DLO of make L & T or equivalent in Havells/ C & S

Supply and fix in repairs wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulating copper stranded conductor single core cable in surface/ recesed as required earth wire in and including PVC casing caping of suitable standard size of Two run of copper conductor of size 4.0Sqmm + one run of 2.5 Sqmm as earth wire all as specified and directed.

Material and labour and fixing of DWC pipes, it should be flexible in diameter as well as in joints under external load and soil natural movement, socket & spigot joint with elastometric sealing ring, it should be highly corrosive resistant and it should be impact resistant, chemical resistant, flexible, light weight and it should have hih flow capacity of internal 38 mm dia as per IS-14930 complete with coupler, elbows, joints and necessary joints required for completion of works all as specified and directed. Make : Duraline / Gemini/ Rex.

Removing excavated/surplus soil to a distance n. exc 50 mtr & depositing where directed at a level n. exc 1.5 mtr above the starting point all as directed.

Note:- The amount of schedule of credit on page No. 40 shall be deducted from the amount quoted against sch 'A' while deriving at the contract sum for accptance.

Anand Trading Co